Query running very slow for 2LIS_13_VDKON Extractor.
Dear Experts
Having no Standard InfoCube to accommodate the data from 2LIS_13_VDKON Extractor, I've created an InfoCube having the Standard DSO inbetween. The Data Flow is as below:
2LIS_13_VDKON -> ZSD_DS17 (which is a copy of BCT DSO 0SD_O06) -> ZSD_C17 ---> ZSD_M02 (MultiProvider)
We went live last week and there are only 1252377 records in the InfoCube at the moment in Production. The BEx Query designed on top of the MultiProvider runs by default for the last 3 Months (Variable created) initially and the User will be able to look up only the last 13 Months (another Variable created) of data at any given point in time.
The User doesn't want any Selection Parameters on this Report and that's how it is created.
The problem now is.. this 'Margin on Agreed Cost' Report taking about 3 Minutes and 5 Seconds to run.
I have RSRV on the InfoCube and everything seems to be ok, tried Aggregates (though I understand that this number of records wouldn't need one to be created) and have also tried Query Cache today but no good.
Is there anything that I might have overlooked when designing the InfoCube and the BEx Query? Attached are the screenshots of the InfoCube, MultiProvider and the BEx Query for your reference.
Any suggestions are very much appreciated.
Thanks in advance for your time.
Chandu
Hi Anshu
Thanks for your time.
The link you've sent was very useful indeed.
I followed instructions from your link and below are the statistics 4 days after this Cube went into Production:
As you could see, the InfoCube design is very fine.
We have noticed that the Report runs within a few seconds when it is run by 0BILL_DATE in Selection Parameters. Therefore, we are trying to buy the End User to have some Selection Parameters so that the performance of the Report will improve.
I have already created Aggregates for this Cube but in vain!
Can anyone please send me the Screenshots of the InfoCube Design which captures all the fields of 2LIS_13_VDKON Extractor?
Thanks,
Chandu
Similar Messages
-
Query runs very slow and sometime freezes
Hi Experts,
I have just installed SAP GUI 710 but when i open a query in analyzer it runs very slow and if the variables are set for more than 6 months it just sits there and finally times out. It takes at least 5 minutes to open the query if it opens at all. Can you please advise me on how to resolve this issue??
Thanks, point will be awarded.Worth running RSRT .
Ravi Thothadri -
Oracle query running very slow
Hi,
We've MS-Access application which was pointing to UDB. Now we migrated it to point Oracle DB 9.2. After migration some of the query is running very slow.
These queries used to take less than 30 seconds in UDB now taking more than 5 Minutes in Oracle.
some more obeservation :
(1) Some of the queries using "HAVING" clause without any aggregate function. When I moved this condition to "WHERE" clause, performance improved a lot.
But problem is that I can't suggest this solution to "USERS". They are creating query using "query wizard" in MS-Access and they started creating noise on this.
(2) I tested same MDB in two different PCs and same query is returning records in 4 seconds in one system, is taking more than 10 minutes in other system.
Since I'm new to MS-Access, I don't know what other information I need to provide here.
Please help me out.ms wrote:
Hi All
I am using Oracle 11g . My table contains 10-12 lac rows.Do not use the word lac: it is common in the Indian sub-continent but not known much outside of
there because it is not standard English.
>
1) what is the difference between a index on one column and an index of number of columns ( i.e composite index). The obvious answer of one contains only one column and the other contains more than one.
2) For what columns in a where clause should index be created ( single columns index or composite index ).Depends
3) Also can u suggest how to improve the perfomane of thsi query?Please read: SQL and PL/SQL FAQ
which tells you how to ask a performance related question -
MS-Access query running very slow
Hi,
We've MS-Access application which was pointing to UDB. Now we migrated it to point Oracle DB 9.2. After migration some of the query is running very slow.
These queries used to take less than 30 seconds in UDB now taking more than 5 Minutes in Oracle.
some more obeservation :
(1) Some of the queries using "HAVING" clause without any aggregate function. When I moved this condition to "WHERE" clause, performance improved a lot.
But problem is that I can't suggest this solution to "USERS". They are creating query using "query wizard" in MS-Access and they started creating noise on this.
(2) I tested same MDB in two different PCs and same query is returning records in 4 seconds in one system, is taking more than 10 minutes in other system.
Since I'm new to MS-Access, I don't know what other information I need to provide here.
Please help me out.I have seen the problem like this,too
can i have you -
Query running very slow with db file sequential read waits which all indexes would be recommended
My query is doing lot of db file sequential reads I want to create few indexes and extended stats please help me with your suggestions.
Can anybody suggest I am unable to paste my query here -don't know why it's not getting pasted--is it not permitted ?
thank you.The simplest way to find it out is using Oracle Enterprise Manager. Just locate the SQL ID for the SQL and run "SQL tuning advisor". This will exactly pinpoint where do you need to create indexes etc. Another option is manually running explain plan for the SQL and finding out which predicate is causing full scans with high i/o
Regards
Tushar -
I have a early 2013 macbook pro with retina display and it has all of the updates. My mac won't load pages fast anymore on an browser. And it won't run anything as fast as it used to. This just started happening to me about 2-3 weeks ago. Please help me fix this problem I have no clue what is going on.
Thank you
Specs :
2.7 GHz Intel Core i7
16 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1249 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 200 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:per sec:ms/s:KiB/s:%:total:MB:total' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%d MB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~/P.+ts:/&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+5;i++)u[i]=u[2];split("'"${k[28]}"'",l,":");for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[6]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' print\ system --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|commit - no t|deprec|Goog|realp|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} Trust\ settings );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 65 6 76 13;D2 45 20 52 66;D4 66 7 77 14;D4 17 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 96;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 12;D4 15 5 72 12;C4;};D4 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 31 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
The below Query runs very slow
SELECT
ACT1.PROJ,
ACT1.ACT,
ACT1.VER,
ACT1.DS,
ACT1.UC,
ACT1.ACT_RN,
PRED1.PRED,
PRED_DS.DS,
PRED_DS.UC01 ACT_TYPE ,
PRED1.RN,
SUCC.SUC
,SUCC.SUC_NAME
,SUCC.SUC_TYPE
,SUCC.SUCC_RN
FROM
(SELECT A.PROJ , A.VER , A.ACT , A.DS , A.UC01 UC , B.RN ACT_RN
FROM PM_PORTAL.AV_ACTIVITY A , PM_PORTAL.AV_RESREQ B
WHERE A.PROJ = B.PROJ(+)
AND A.ACT = B.ACT(+)
AND A.VER = B.VER(+)
AND A.VER = 50
AND A.PROJ LIKE 'BOM_%'
AND A.UC01 = '560'
) ACT1 ,
( SELECT A.PROJ , A.ACT , A.VER , A.PRED , B.RN
FROM PM_PORTAL.AV_RELN A , PM_PORTAL.AV_RESREQ B
WHERE A.PROJ LIKE 'BOM_%'
AND A.VER = 50
AND A.PROJ = B.PROJ(+)
AND A.PRED = B.ACT(+)
AND A.VER = B.VER(+)
) PRED1,
( SELECT DS , UC01 ,ACT ,VER , PROJ
FROM PM_PORTAL.AV_ACTIVITY
WHERE PROJ LIKE 'BOM_%'
AND VER = 50
) PRED_DS ,
(SELECT A.PROJ , A.VER , A.ACT SUC , A.PRED , B.DS SUC_NAME ,B.UC01 SUC_TYPE , C.RN SUCC_RN
FROM PM_PORTAL.AV_RELN A , PM_PORTAL.AV_ACTIVITY B , PM_PORTAL.AV_RESREQ C
WHERE A.PROJ = B.PROJ
AND A.ACT = B.ACT
AND A.VER = B.VER
AND B.PROJ = C.PROJ
AND B.ACT = C.ACT
AND B.VER = C.VER
) SUCC
WHERE ACT1.PROJ=PRED1.PROJ(+)
AND ACT1.ACT=PRED1.ACT(+)
AND ACT1.VER=PRED1.VER(+)
AND PRED1.PRED = PRED_DS.ACT
AND PRED1.PROJ = PRED_DS.PROJ
AND PRED1.VER = PRED_DS.VER
AND SUCC.PROJ = PRED1.PROJ
AND SUCC.VER = PRED1.VER
AND SUCC.PRED = PRED1.PRED
--Execution Plan
SELECT STATEMENT, GOAL = CHOOSE 293 1 337
NESTED LOOPS 293 1 337
NESTED LOOPS 290 1 305
NESTED LOOPS 287 1 242
NESTED LOOPS 282 1 206
FILTER
HASH JOIN OUTER
VIEW PM_PORTAL_READ 65 2 194
NESTED LOOPS OUTER 65 2 190
TABLE ACCESS BY INDEX ROWID TRN_ARTE AV_ACTIVITY_NPART 59 2 126
INDEX RANGE SCAN TRN_ARTE AV_ACTIVITY_1_NPART 55 2
INDEX RANGE SCAN TRN_ARTE AV_RESREQ_1_NPART 3 35 1120
VIEW PM_PORTAL_READ 210 101 4646
HASH JOIN OUTER 210 101 6868
INDEX RANGE SCAN TRN_ARTE AV_RELN_1_NPART 161 101 3636
INDEX RANGE SCAN TRN_ARTE AV_RESREQ_1_NPART 48 35 1120
TABLE ACCESS BY INDEX ROWID TRN_ARTE AV_ACTIVITY_NPART 3 56 3528
INDEX UNIQUE SCAN TRN_ARTE AV_ACTIVITY_1_NPART 2 56
INDEX RANGE SCAN TRN_ARTE AV_RELN_1_NPART 5 101 3636
TABLE ACCESS BY INDEX ROWID TRN_ARTE AV_ACTIVITY_NPART 3 56 3528
INDEX UNIQUE SCAN TRN_ARTE AV_ACTIVITY_1_NPART 2 56
INDEX RANGE SCAN TRN_ARTE AV_RESREQ_1_NPART 3 35 1120Here's the verbatim response I gave yesterday to another user also posting his SQL and asking the same question.. why is it slow?
Who says it is not already running as fast as possible?
In order to solve a problem, you need to know the problem. Stating something like 'a query is slow and should be faster' is stating an opinion - it is not describing a problem that can be resolved.
My suggestion is to turn a complex problem, into a bunch of smaller and simpler problems. If you suspect that the query could be faster, pull it apart. Test each step/component of the query in isolation. E.g. start with a single table and progressively add joins to determine what the CBO does with each additional join, what you're asking Oracle to do ito processing, and not only checking that the CBO does not make obvious errors, but that what you're asking via SQL is the best approach to get to the answer. -
VO Query runs very slow in jdev, quickly in Toad/SQL Plus
Hi,
I am trying to create a search application using JSF with ADF BC. I have a VO based on a SQL query, which joins two tables. The search criteria is referenced using bind parameters in the VO.
In Toad, SQL Plus, and SQL Developer, I can run my VO query and the results return quickly, within a couple of seconds. An Explain Plan indicates that all indexes are being correctly used. However, when I try to run my search form (exact same query) in jdev, it executes extremely slowly - almost 5 minutes before a result set is returned. My VO query is below.
select oea.order_yr,
oea.order_type,
oea.order_key,
oea.max_rev,
oeo.profit_center_id,
oeo.contract_total_price,
oeo.complexity
from oe_admin oea,
oe_order oeo
where oea.admin_id = oeo.admin_id
and oeo.profit_center_id = :ProfitCenter
and oea.order_yr = nvl(:OYear, oea.order_yr)
and oea.order_type = nvl(:OType, oea.order_type)
I've been messing with this for several days and I'm out of ideas. Does anyone have any suggestions?The question is not whether the query uses a viewLink but rather do you have any other views that are linked to this view - if you do have such views you might want to check the setting for whether children are retrieved as well.
Also run ADF BC in debug mode to see the exact query that is being sent to the server and check out the explain plan for that one. -
Oracle Query runs very slow filling table
I have used Java Studio Creator 2 with Sun Java System Application Server Platform Edition 8.1_02 (build b06-fcs) in the past. I created a simple oracle query to populate a table and displaying about 560 rows in a table via a web browser. This runs excellent.
Now, I use Netbeans 6, along with Sun Java System Application Server 9.1 (build b58g-fcs), I populate a table using the same query as before and it takes quite a long time to fill the table. Actually, the browser keeps asking if I want to stop the script about 6 times. If I keep saying yes, it eventually completes.
I'm using an Oracle 9i database and have tried different drivers from Oracle with the same results.
Any idea why the difference in filling the table or how to correct this? Thanks!
Please note: I have this same question posted in the Java.net forums but it's not been answered so far, I hope this isn't crossposting and I get yelled at!for NetBeans questions I suggest posting your question in the [email protected] For more information:
http://www.netbeans.org/community/index.html -
GL Balances query runs very slow
Hi All,
I am working on Oracle Applications 11i (11.5.10.2) environment.
Database is 11g (Rel.2)
I need to pull the data for all the SOB's and using the below query is running for many hours.
Please help with a better alternate for below query:
SELECT gcc1.segment3 acct,
gcc1.segment3 subacct,
(SELECT SUM(DECODE(gcc.account_type,
'A',
NVL(b.begin_balance_dr, 0) -
NVL(b.begin_balance_cr, 0),
'E',
NVL(b.begin_balance_dr, 0) -
NVL(b.begin_balance_cr, 0),
'L',
NVL(b.begin_balance_cr, 0) -
NVL(b.begin_balance_dr, 0),
'O',
NVL(b.begin_balance_cr, 0) -
NVL(b.begin_balance_dr, 0),
'R',
NVL(b.begin_balance_cr, 0) -
NVL(b.begin_balance_dr, 0)) +
DECODE(gcc.account_type,
'A',
NVL(b.period_net_dr, 0) - NVL(b.period_net_cr, 0),
'E',
NVL(b.period_net_dr, 0) - NVL(b.period_net_cr, 0),
'L',
NVL(b.period_net_cr, 0) - NVL(b.period_net_dr, 0),
'O',
NVL(b.period_net_cr, 0) - NVL(b.period_net_dr, 0),
'R',
NVL(b.period_net_cr, 0) - NVL(b.period_net_dr, 0))) ytd_amt
FROM gl_balances b, gl_code_combinations gcc
WHERE b.code_combination_id = gcc.code_combination_id
AND b.actual_flag = 'A'
AND b.translated_flag is NULL
AND gcc.enabled_flag = 'Y'
AND gcc.end_date_active is NULL
AND gcc1.segment3 = gcc.segment3
AND gcc1.segment4 = gcc.segment4
AND gb1.set_of_books_id = b.set_of_books_id
AND gb1.currency_code = b.currency_code
AND b.period_name = &l_prev_period) begin_balance,
(SELECT SUM(DECODE(gcc.account_type,
'A',
NVL(b.begin_balance_dr, 0) -
NVL(b.begin_balance_cr, 0),
'E',
NVL(b.begin_balance_dr, 0) -
NVL(b.begin_balance_cr, 0),
'L',
NVL(b.begin_balance_cr, 0) -
NVL(b.begin_balance_dr, 0),
'O',
NVL(b.begin_balance_cr, 0) -
NVL(b.begin_balance_dr, 0),
'R',
NVL(b.begin_balance_cr, 0) -
NVL(b.begin_balance_dr, 0)) +
DECODE(gcc.account_type,
'A',
NVL(b.period_net_dr, 0) - NVL(b.period_net_cr, 0),
'E',
NVL(b.period_net_dr, 0) - NVL(b.period_net_cr, 0),
'L',
NVL(b.period_net_cr, 0) - NVL(b.period_net_dr, 0),
'O',
NVL(b.period_net_cr, 0) - NVL(b.period_net_dr, 0),
'R',
NVL(b.period_net_cr, 0) - NVL(b.period_net_dr, 0))) ytd_amt
FROM gl_balances b, gl_code_combinations gcc
WHERE b.code_combination_id = gcc.code_combination_id
and b.rowid = gb1.rowid
and gcc.rowid = gcc1.rowid) Ending_balance
FROM gl_balances gb1, gl_code_combinations gcc1
WHERE gb1.code_combination_id = gcc1.code_combination_id
AND gb1.actual_flag = 'A'
AND gb1.translated_flag is NULL
AND gcc1.enabled_flag = 'Y'
AND gcc1.end_date_active is NULL
AND gb1.period_name = &p_period
Thanks,
gvk.Worth running RSRT .
Ravi Thothadri -
Query Running very slow.............
Hi All,
The below query takes long time to execute. Please review this and provide me the better solution by which i can get the faster result .
I have created the index in the txnlog table on timestamp,serialno, and in alt_merchant am on alt_merchantno and in txnlog_overrun on merchantno.
SELECT t.timestamp,t.wicno,t.merchantno,u.overrun_amount,NVL(ad.state,'N/A')
FROM txnlog t,txnlog_overrun u,alt_merchant am,address ad
WHERE t.timestamp > SYSDATE -15
AND t.timestamp=u.timestamp(+)
AND t.serialno=u.serialno(+)
AND t.wicno=am.alt_merchantno(+)
AND t.merchantno=am.merchantno(+)
AND am.ADDRESSID=ad.addressid(+)
Txnlog having millions of records.
Regards,
NiteshHello
SELECT NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_ROW_LEN FROM >USER_TABLES WHERE TABLE_NAME ='TXNLOG';
Returns Null for all columns.This suggests to me that statistics are missing. Have you generated them as I suggested? Could you post the execution plan here:
tylerd@DEV2> set pages 50000
tylerd@DEV2> set lines 200
tylerd@DEV2> EXPLAIN PLAN FOR
2 select * from dual
3 /
Explained.
tylerd@DEV2> SELECT * FROM TABLE(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 272002086
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 2 | 2 (0)| 00:00:01 |
| 1 | TABLE ACCESS FULL| DUAL | 1 | 2 | 2 (0)| 00:00:01 |
8 rows selected.David -
Macbook Pro suddenly started running very slow
Hello All,
My Macbook Pro is running very slow for the past 2 days. Did disk repair, Erasing free space, deleted a lot of unwanted files and also restarting my machine multiple times. Kindly suggest a solution for my problem. Please find my ETRE check details below,
EtreCheck version: 1.9.15 (52)
Report generated September 1, 2014 at 11:21:27 PM GMT+10
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:8:46
Disk Information: ?
TOSHIBA MK3265GSXF disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (69.49 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Startup Items: ?
EyeConnect: Path: /Library/StartupItems/EyeConnect
Problem System Launch Agents: ?
[loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.parallels.desktop.launchdaemon.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[failed] com.tvmobili.tvmobilisvcd.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.canon.MFManager.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ReceiverHelper.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.parallels.desktop.launch.plist Support
[loaded] com.parallels.DesktopControlAgent.plist Support
[running] com.parallels.vm.prl_pcproxy.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[failed] com.tvmobili.artwork.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items: ?
iTunesHelper
Dropbox
SwitchResX Daemon
Android File Transfer Agent
Google Chrome
Actions Server
Content Manager Assistant
Internet Plug-ins: ?
LogitechHarmony: Version: 1.0.0.1 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.6r636 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Picasa: Version: 1.0 Support
3rd Party Preference Panes: ?
Application Enhancer Support
EyeConnect
Flash Player Support
Paragon NTFS for Mac ® OS X Support
Time Machine: ?
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 232.58 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 2 TB
Total number of backups: 12
Oldest backup: 2014-02-26 14:51:47 +0000
Last backup: 2014-07-22 12:36:09 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
10% CCleaner
7% Safari
4% WindowServer
2% Finder
2% prl_disp_service
Top Processes by Memory: ?
123 MB com.apple.IconServicesAgent
98 MB Safari
82 MB EyeConnect
82 MB CCleaner
74 MB Finder
Virtual Memory Information: ?
4.95 GB Free RAM
1.48 GB Active RAM
346 MB Inactive RAM
1.23 GB Wired RAM
317 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Problem description:
My computer is running very slow ever since I switched to Yosemite. I get the multicolored wheel just opening my browser at times and waiting for a page to open, or an application. Any ideas other than rebooting my computer to get the problem to alleviate for a few days?
EtreCheck version: 2.1.8 (121)
Report generated February 16, 2015 at 2:35:55 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Technical Specifications)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
Empty
BANK 1/DIMM0
Empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 11 days 19:34:2
Disk Information: ℹ️
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 60.76 GB (15.30 GB free)
Macintosh HD (disk1) / : 438.11 GB (351.62 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 438.49 GB Online
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
hp officejet 4200 series
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.accountsd.plist
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.bird.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.coreservices.uiagent.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.iconservices.iconservicesagent.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.secd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
19 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.coresymbolicationd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.iconservices.iconservicesagent.plist
[killed] com.apple.iconservices.iconservicesd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.sandboxd.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.spindump.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
20 processes killed due to memory pressure
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.GoodShop.updater.plist [Click for support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 5.2 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 [Click for support]
RealPlayer Plugin: Version: Unknown [Click for support]
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
DivXBrowserPlugin: Version: 2.0 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.79 [Click for support]
VSeeHelper: Version: VSeeHelper 1.0.0.0 - SDK 10.8 [Click for support]
Safari Extensions: ℹ️
avast! Online Security
Goodshop app
3rd Party Preference Panes: ℹ️
DivX [Click for support]
Flip4Mac WMV [Click for support]
MacFUSE [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 438.11 GB Disk used: 86.50 GB
Destinations:
Backup [Local]
Total size: 159.70 GB
Total number of backups: 3
Oldest backup: 2014-11-24 05:20:18 +0000
Last backup: 2015-02-01 03:04:02 +0000
Size of backup disk: Too small
Backup size 159.70 GB < (Disk used 86.50 GB X 3)
Top Processes by CPU: ℹ️
8% WindowServer
5% DashboardClient
3% mds
2% launchd
0% ocspd
Top Processes by Memory: ℹ️
64 MB WindowServer
52 MB thunderbird
34 MB mds
34 MB Mail
30 MB mds_stores
Virtual Memory Information: ℹ️
654 MB Free RAM
834 MB Active RAM
777 MB Inactive RAM
903 MB Wired RAM
102.49 GB Page-ins
1.46 GB Page-outs
Diagnostics Information: ℹ️
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.Hi Linc! Sorry for the delay. Here is the information:
Start time: 16:48:08 02/28/15
Revision: 1241
Model Identifier: iMac10,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 10 days 21:04
UID: 502
SerialATA
ST*******ASQ
USB
officejet 4200 series (Hewlett Packard)
Bluetooth
Apple Wireless Mouse
FileVault 2: On FileVault master keychain appears to be installed
FileVault 1: On
I/O wait time (ms/s)
launchd (UID 0): 53
Font issues: 40
Firewall: On
System caches/logs
1987 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-01-31 SecurityAgent crash
2015-02-01 2BUA8C4S2C.com.agilebits.onepassword4-helper crash
2015-02-01 IMDPersistenceAgent crash
2015-02-01 secd crash
2015-02-20 Inkjet7 crash
2015-02-28 IMDPersistenceAgent crash
2015-02-28 secd crash x2
Kernel log
Feb 23 07:06:08 Failed to get hibernate image filename
Feb 23 17:07:05 Failed to get hibernate image filename
Feb 24 07:06:05 Failed to get hibernate image filename
Feb 24 17:47:13 Failed to get hibernate image filename
Feb 24 18:31:50 IOAudioStream[0xffffff802df40400]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
Feb 24 19:14:41 Failed to get hibernate image filename
Feb 24 20:56:40 Failed to get hibernate image filename
Feb 24 22:14:14 Failed to get hibernate image filename
Feb 24 22:38:31 Failed to get hibernate image filename
Feb 25 06:58:23 Failed to get hibernate image filename
Feb 25 17:40:53 Failed to get hibernate image filename
Feb 25 21:04:27 Failed to get hibernate image filename
Feb 25 21:31:52 Failed to get hibernate image filename
Feb 26 07:03:06 Failed to get hibernate image filename
Feb 26 17:06:59 Failed to get hibernate image filename
Feb 27 06:58:56 Failed to get hibernate image filename
Feb 27 17:02:56 Failed to get hibernate image filename
Feb 27 19:17:20 Failed to get hibernate image filename
Feb 27 23:04:12 Failed to get hibernate image filename
Feb 28 10:09:19 Failed to get hibernate image filename
Feb 28 13:07:21 Failed to get hibernate image filename
Feb 28 14:08:38 Failed to get hibernate image filename
Feb 28 15:11:16 Failed to get hibernate image filename
Feb 28 16:18:21 msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
Feb 28 16:29:32 Failed to get hibernate image filename
System log
label = "2.5.4.3";
"localized label" = "2.5.4.3";
type = string;
value = "courier.sandbox.push.apple.com";
Feb 28 16:30:55 loginwindow ERROR | __50-[MCXDLauncher(Private) startNetworkChangeThread:]_block_invoke | Unable to GetMCXAgentPort
Feb 28 16:31:09 apsd Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[8424]
Feb 28 16:31:44 apsd Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[8433]
Feb 28 16:32:36 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
Feb 28 16:34:16 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Feb 28 16:38:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "1Password mini" for over 1.00 seconds. Server has re-enabled them.
Feb 28 16:38:49 WindowServer WSGetSurfaceInWindow : Invalid surface 769181205 for window 4518
Feb 28 16:38:49 WindowServer WSGetSurfaceInWindow : Invalid surface 769181205 for window 4518
Feb 28 16:38:56 WindowServer WSGetSurfaceInWindow : Invalid surface 1023641180 for window 4522
Feb 28 16:38:56 WindowServer WSGetSurfaceInWindow : Invalid surface 1023641180 for window 4522
Feb 28 16:39:06 WindowServer WSGetSurfaceInWindow : Invalid surface 1058035653 for window 4525
Feb 28 16:39:06 WindowServer WSGetSurfaceInWindow : Invalid surface 1058035653 for window 4525
Feb 28 16:39:22 WindowServer WSGetSurfaceInWindow : Invalid surface 996085260 for window 4530
Feb 28 16:39:22 WindowServer WSGetSurfaceInWindow : Invalid surface 996085260 for window 4530
Feb 28 16:39:33 WindowServer WSGetSurfaceInWindow : Invalid surface 1034343505 for window 4534
Feb 28 16:39:33 WindowServer WSGetSurfaceInWindow : Invalid surface 1034343505 for window 4534
Feb 28 16:39:39 Google Chrome Helper CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 28 16:39:39 Google Chrome Helper CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 28 16:46:20 apsd Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[8979]
Feb 28 16:49:02 loginwindow ERROR | __50-[MCXDLauncher(Private) startNetworkChangeThread:]_block_invoke | Unable to GetMCXAgentPort
Daemons
com.apple.AccountPolicyHelper
com.apple.AssetCacheLocatorService
com.apple.CodeSigningHelper
com.apple.MobileFileIntegrity
com.apple.awdd
com.apple.backupd-auto
com.apple.cache_delete
com.apple.coresymbolicationd
com.apple.ctkd
com.apple.diagnosticd
com.apple.emond.aslmanager
com.apple.iconservices.iconservicesagent
com.apple.iconservices.iconservicesd
com.apple.ifdreader
com.apple.installd
com.apple.installer.osmessagetracing
com.apple.nehelper
com.apple.networkd_privileged
com.apple.nsurlsessiond_privileged
com.apple.nsurlstoraged
com.apple.periodic-daily
com.apple.periodic-monthly
com.apple.periodic-weekly
com.apple.sandboxd
com.apple.secinitd
com.apple.security.syspolicy
- status: -15
com.apple.softwareupdate_download_service
com.apple.softwareupdated
com.apple.spindump
com.apple.sysmond
com.apple.systemstatsd
com.apple.tccd.system
com.apple.watchdogd
com.apple.wdhelper
org.cups.cupsd
Agents
2BUA8C4S2C.com.agilebits.onepassword4-helper
com.adobe.ARM.UUID
com.apple.AirPortBaseStationAgent
com.apple.imdpersistence.IMDPersistenceAgent
- status: -10
com.apple.secd
- status: -10
User crontab
59 16 * * 7 /Applications/MacScan\ 2/MacScan.app/Contents/MacOS/MacScan -autoscan YES
Firefox extensions
Mozilla Firefox hotfix
Widgets
iCal
iCloud errors
cloudd 7
comapple.InputMethodKit.UserDictionary 2
CallHistorySyncHelper 1
Continuity errors
sharingd 1
Restricted files: 174
Lockfiles: 30
High file counts
Desktop: 54
Accessibility
Scroll Zoom: On
Contents of /System/Library/Security/authorization.plist
- mod date: Oct 9 02:17:00 2014
- checksum: 2720110640
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>comment</key>
<string>The name of the requested right is matched against the keys. An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
allow rule: this is always allowed
<key>com.apple.TestApp.benign</key>
<string>allow</string>
deny rule: this is always denied
<key>com.apple.TestApp.dangerous</key>
<string>deny</string>
user rule: successful authentication as a user in the specified group(5) allows the associated right.
The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
See remaining rules for examples.
</string>
<key>rights</key>
<dict>
<key></key>
<dict>
<key>class</key>
<string>rule</string>
<key>comment</key>
...and 1850 more line(s)
Contents of /private/etc/authorization.deprecated
- mod date: Oct 25 13:37:39 2014
- checksum: 842352627
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>comment</key>
<string>The name of the requested right is matched against the keys. An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
allow rule: this is always allowed
<key>com.apple.TestApp.benign</key>
<string>allow</string>
deny rule: this is always denied
<key>com.apple.TestApp.dangerous</key>
<string>deny</string>
user rule: successful authentication as a user in the specified group(5) allows the associated right.
The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
See remaining rules for examples.
</string>
<key>rights</key>
<dict>
<key></key>
<dict>
<key>class</key>
<string>rule</string>
<key>comment</key>
...and 1013 more line(s)
Contents of /private/etc/pam.d/prl_disp_service
- mod date: Mar 5 03:24:01 2010
- checksum: 1160556194
auth required pam_nologin.so
auth optional pam_afpmount.so
auth sufficient pam_securityserver.so nullok
auth sufficient pam_unix.so nullok
auth required pam_deny.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
session optional pam_afpmount.so
Contents of /private/etc/pam.d/prl_disp_service.snow_leopard
- mod date: Mar 5 03:24:01 2010
- checksum: 2633576920
auth optional pam_krb5.so
auth optional pam_mount.so
auth sufficient pam_serialnumber.so serverinstall legacy
auth required pam_opendirectory.so
account required pam_nologin.so
account required pam_opendirectory.so
password required pam_deny.so
session required pam_launchd.so
session required pam_uwtmp.so
session optional pam_mount.so
auth optional pam_krb5.so
auth optional pam_mount.so
auth sufficient pam_serialnumber.so serverinstall legacy
auth required pam_opendirectory.so
account required pam_nologin.so
account required pam_opendirectory.so
password required pam_deny.so
session required pam_launchd.so
session required pam_uwtmp.so
session optional pam_mount.so
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Aug 1 17:37:19 2012
- checksum: 408149527
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Applications
/Applications/Acrobat 6.0 Professional/Acrobat 6.0.2 Professional.app
- N/A
/Applications/Acrobat 6.0 Professional/Acrobat Distiller 6.0.2.app
- com.adobe.distiller
/Applications/Adobe/Acrobat.com.app
- com.adobe.mauby.UUID.1
/Applications/Adobe/Adobe Help.app
- chc.UUID.1
/Applications/Bible Explorer 4.app
- com.BE8.wordsearchbible.corp
/Applications/DivX Converter.app
- N/A
/Applications/DivX Player.app
- com.divx.DivX_Player
/Applications/DivX/DivX Community.app
- com.spritec.DVD
/Applications/DivX/DivX Products.app
- com.spritec.DVD
/Applications/DivX/DivX Support.app
- com.spritec.DVD
/Applications/DivX/Uninstall DivX for Mac.app
- com.divxinc.uninstalldivxformac
/Applications/FOX News Live.app
- FoxPlayerAIR.UUID.1
/Applications/Flip4Mac/WMV Player.app
- net.telestream.wmv.player
/Applications/Garmin Express.app
- com.garmin.renu.client
/Applications/Garmin WebUpdater.app
- com.garmin.WebUpdater
/Applications/Hewlett-Packard/HP Image Edit.app
- com.hp.hpimageedit
/Applications/Hewlett-Packard/HP Image Print.app
- com.hp.photo.imageprint
/Applications/Hewlett-Packard/HP Image Zone.app
- com.hp.imagezone
/Applications/Hewlett-Packard/HP Instant Share.app
- com.hp.photo.instantshare
/Applications/Hewlett-Packard/HP Panorama Stitching.app
- com.hp.PanoramaStitching
/Applications/Hewlett-Packard/HP Photo and Imaging Software/HP E-mail Portal/HP E-mail Portal
- N/A
/Applications/Hewlett-Packard/HP Photo and Imaging Software/HP Photo and Imaging Director/Director Docker.app
- com.hp.director.docker
/Applications/Hewlett-Packard/HP Software Update.app
- com.hp.softwareupdate
/Applications/Hewlett-Packard/HP Uninstaller
- N/A
/Applications/Karaoke Maker/Audacity.app
- net.sourceforge.audacity
/Applications/Macromedia Studio 8/Macromedia Contribute 3/Contribute
- com.macromedia.Contribute
/Applications/Macromedia Studio 8/Macromedia Contribute 3/Contribute/Contents/MacOS/Contribute
- N/A
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8
- com.macromedia.Dreamweaver
/Applications/Macromedia Studio 8/Macromedia Extension Manager/Extension Manager.app
- com.macromedia.ExtensionManager
/Applications/Macromedia Studio 8/Macromedia Fireworks 8/Fireworks 8.app
- com.macromedia.fireworks
/Applications/Macromedia Studio 8/Macromedia Flash 8 VideoEncoder/Flash 8 Video Encoder.app
- com.macromedia.FLVEncoder
/Applications/Macromedia Studio 8/Macromedia Flash 8/Flash 8.app
- com.macromedia.flash.8
/Applications/Microsoft AutoUpdate.app
- com.microsoft.autoupdate
/Applications/Microsoft Office 2004/Additional Tools/Handheld Sync Installer
- com.MindVision.VISEX
/Applications/Microsoft Office 2004/Additional Tools/Handheld Sync Installer/Contents/MacOSClassic/Handheld Sync Installer
- N/A
/Applications/Microsoft Office 2004/Additional Tools/Microsoft Language Register/Microsoft Language Register
- N/A
/Applications/Microsoft Office 2004/Additional Tools/Remote Desktop Connection/Remote Desktop Connection
- N/A
/Applications/Microsoft Office 2004/Additional Tools/Remove Office/Remove Office
- N/A
/Applications/Microsoft Office 2004/Additional Tools/Windows Media Installer
- N/A
/Applications/Microsoft Office 2004/Additional Tools/Windows Media Installer/Contents/MacOS/Windows Media Installer
- N/A
/Applications/Microsoft Office 2004/MSN Messenger.app
- Microsoft/com.microsoft.Messenger
/Applications/Microsoft Office 2004/Microsoft Entourage
- N/A
/Applications/Microsoft Office 2004/Microsoft Excel
- N/A
/Applications/Microsoft Office 2004/Microsoft PowerPoint
- N/A
/Applications/Microsoft Office 2004/Microsoft Word
- N/A
/Applications/Microsoft Office 2004/Office/Alerts Daemon.app
- Microsoft/com.microsoft.AlertsDaemon
/Applications/Microsoft Office 2004/Office/Database Utility
- N/A
/Applications/Microsoft Office 2004/Office/Equation Editor
- N/A
/Applications/Microsoft Office 2004/Office/Microsoft Cert Manager.app
- com.microsoft.certmgr
/Applications/Microsoft Office 2004/Office/Microsoft Clip Gallery
- N/A
/Applications/Microsoft Office 2004/Office/Microsoft Database Daemon
- N/A
/Applications/Microsoft Office 2004/Office/Microsoft Error Reporting.app
- com.microsoft.error_reporting
/Applications/Microsoft Office 2004/Office/Microsoft Graph
- N/A
/Applications/Microsoft Office 2004/Office/Microsoft Office Notifications
- N/A
/Applications/Microsoft Office 2004/Office/Microsoft Query
- N/A
/Applications/Microsoft Office 2004/Office/Microsoft Sync Services.app
- com.microsoft.entourage.syncservices
/Applications/Microsoft Office 2004/Office/Organization Chart
- N/A
/Applications/Microsoft Office 2004/Office/Project Gallery Launcher
- N/A
/Applications/Open XML Converter.app
- com.microsoft.OfficeConverter
/Applications/OpenOffice.app
- org.openoffice.script
/Applications/Quicken 2007/Quicken 2007
- com.intuit.quicken
/Applications/Quicken 2007/Quicken 2007/Contents/MacOS/Quicken 2007
- N/A
/Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Emergency Records Organizer
- com.intuit.ero
/Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Emergency Records Organizer/Contents/MacOSClassic/Emergency Records Organizer
- N/A
/Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Home Inventory.app
- com.intuit.HomeInventory
/Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Quicken Backup Utility.app
- com.intuit.quicken.dotmac
/Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Quicken Scheduler
- N/A
/Applications/RealPlayer Converter.app
- com.real.converter
/Applications/RealPlayer.app
- com.RealNetworks.RealPlayer
/Applications/TorBrowser.app
- N/A
/Applications/Utilities/Adobe AIR Application Installer.app
- com.adobe.air.ApplicationInstaller
/Applications/Utilities/Adobe Utilities.localized/Adobe Updater6/Adobe Updater.app
- "com.Adobe.ESD.AdobeUpdaterApplication"
/Library/Application Support/Adobe/AdobePDF.app
- com.Adobe.print.AdobePDF.bef
/Library/Application Support/DivX/DivXUpdater.app
- com.divx.DivXUpdater
/Library/Application Support/Hewlett-Packard/Software Update/HP Rules Processor.app
- com.hp.rulesprocessor
/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app
- com.hp.HPScheduler
/Library/Application Support/Hewlett-Packard/Software Update/HP Software Updater
- N/A
/Library/Application Support/Hewlett-Packard/Software Update/HP Software Updater/Contents/MacOS/HP Software Updater
- N/A
/Library/Application Support/Microsoft/HV1.0/Microsoft Help Viewer.app
- com.microsoft.helpviewer
/Library/Application Support/Microsoft/Office Converter Support/Open XML for Charts.app
- com.microsoft.openxml.chartconverter.app
/Library/Application Support/Microsoft/Office Converter Support/Open XML for Excel.app
- com.microsoft.openxml.excel.app
/Library/Application Support/Microsoft/Office Converter Support/Open XML for Word.app
- com.microsoft.openxml.word.app
/Library/Application Support/Microsoft/Office Converter Support/pptfc.app
- com.microsoft.openxml.powerpoint.app
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
- com.microsoft.silverlight.sllauncher
/Library/Application Support/Script Editor/Templates/Cocoa-AppleScript Applet.app
- com.apple.ScriptEditor.id.cocoa-applet-template
/Library/Application Support/Script Editor/Templates/Droplets/Droplet with Settable Properties.app
- com.apple.ScriptEditor.id.droplet-with-settable-properties-template
/Library/Application Support/Script Editor/Templates/Droplets/Recursive File Processing Droplet.app
- com.apple.ScriptEditor.id.file-processing-droplet-template
/Library/Application Support/Script Editor/Templates/Droplets/Recursive Image File Processing Droplet.app
- com.apple.ScriptEditor.id.image-file-processing-droplet-template
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/flashplayer
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_burn_cd.app
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_export_images.app
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_import_images.app
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_panorama_stitch.app
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_use_folders.app
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_use_image_edit.app
- N/A
/Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_use_image_print.app
- N/A
/Library/Documentation/User Guides and Information.localized/Apple Hardware Test Read Me.app
- com.apple.AppleHardwareTestReadMe
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Adobe AIR Application Installer.app
- com.adobe.air.ApplicationInstaller
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Template.app
- com.adobe.air.Template
/Library/Image Capture/Scripts/Import and View with iPhoto.app
- com.hp.iPhoto.icautotask
/Library/Parallels/Parallels Mounter.app
- com.parallels.server.mounter
/Library/Printers/hp/Fax/fax.backend
- com.hp.fax
/Library/Printers/hp/Fax/rastertofax.filter
- com.hp.rastertofax
/Library/Printers/hp/cups/filters/commandtohp.filter
- com.hp.print.cups.filter.commandtohp
/Library/Printers/hp/cups/filters/pdftopdf.filter
- com.hp.print.cups.filter.pdftopdf
/Library/Printers/hp/cups/tools/autosetup.tool
- com.hp.print.autosetup
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
- com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpcfgokakmgnkcojhhkbfbldkacnbeo/Default blpcfgokakmgnkcojhhkbfbldkacnbeo.app
- com.google.Chrome.app.Default-blpcfgokakmgnkcojhhkbfbldkacnbeo-internal
/Users/USER/Library/Caches/com.adobe.Reader.ARM/UUID/Adobe Reader Updater.app
- com.adobe.ARM
/mike's old computer/Adobe/AdobePDF.app
- com.Adobe.print.AdobePDF.bef
/mike's old computer/Adobe/Installers/R2/Setup.app
- com.adobe.Installers.Setup
/mike's old computer/Deimos Rising/Deimos Rising
- N/A
/mike's old computer/IA_Installers/TypingMaster_for_Mac/TypingMasterMac.app
- N/A
/mike's old computer/TypingMasterMac/UninstallerData/Uninstall TypingMaster for Mac.app
- N/A
/mike's old computer/TypingMasterMac/itutoreng.app
- N/A
/mike's old computer/adobe applications/Adobe GoLive CS/Adobe GoLive CS.app
- com.adobe.GoLive
/mike's old computer/adobe applications/Adobe Illustrator CS/2.app
- com.adobe.illustrator
/mike's old computer/adobe applications/Adobe InDesign CS/InDesign CS.app
- com.adobe.InDesign
/mike's old computer/adobe applications/Adobe InDesign CS/Plug-Ins/Online/AUMLibrary.cfm/Contents/SharedSupport/Adobe Update Manager.app
- com.adobe.ESD.AUM
/mike's old computer/adobe applications/Adobe Photoshop CS/Adobe ImageReady CS.app
- com.adobe.ImageReady
/mike's old computer/adobe applications/Adobe Photoshop CS/Adobe Photoshop CS.app
- com.adobe.Photoshop
/mike's old computer/adobe applications/Adobe Version Cue/Uninstall Adobe Version Cue.app
- N/A
/old computer stuff/At Ease Setup Folder/At Ease Setup
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Apple System Profiler
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Calculator
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Chooser
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/FaxStatus
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Graphing Calculator
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Internet Access/Browse the Internet
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Internet Access/Connect To...
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Internet Access/Mail
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Key Caps
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Note Pad
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Remote Access Status
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Scrapbook
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Sherlock
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/SimpleSound
- N/A
/old computer stuff/OLDIESystem Folder/Apple Menu Items/Stickies
- N/A
/old computer stuff/OLDIESystem Folder/Application Support/IntelliTools/Classic Sending Helper
- N/A
/old computer stuff/OLDIESystem Folder/Application Support/Norton AntiVirus ƒ/NAV Small Scanner
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Appearance
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Apple Menu Options
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/AppleTalk
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/ColorSync
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Configuration Manager
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Control Strip
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Date & Time
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/DialAssist
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Energy Saver
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Extensions Manager
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/File Exchange
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/File Sharing
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/General Controls
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Infrared
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Internet
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Keyboard
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Location Manager
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Memory
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Microsoft Office Manager
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Modem
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Monitors & Sound
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Mouse
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Numbers
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/QuickTime™ Settings:™ Settings:
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/QuikSync
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Remote Access
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Speech
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Startup Disk
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/TCP:IP
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Text
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Users & Groups
- N/A
/old computer stuff/OLDIESystem Folder/Control Panels/Web Sharing
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Application Switcher
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/ColorSync Extension
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Control Strip Extension
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Desktop PrintMonitor
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Desktop Printer Spooler
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/FBC Indexing Scheduler
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/FaxMonitor
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Find/Find by Content Indexing
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Folder Actions
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Norton Scheduler
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/PrintMonitor
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Time Synchronizer
- N/A
/old computer stuff/OLDIESystem Folder/Extensions/Web Sharing Extension
- N/A
/old computer stuff/OLDIESystem Folder/Help/Apple Help Viewer/Help Viewer
- N/A
/old computer stuff/OLDIESystem Folder/MacTCP DNR
- N/A
/old computer stuff/OLDIESystem Folder/Scripting Additions/Desktop Printer Manager
- N/A
/old computer stuff/OLDIESystem Folder/Scripting Additions/Network Setup Scripting
- N/A
/old computer stuff/OLDIESystem Folder/Scripting Additions/URL Access Scripting
- N/A
/old computer stuff/OLDIESystem Folder/System Extensions (Disabled)/AOL 5.0 Backup Installer
- N/A
/old computer stuff/Tony Hawk's Pro Skater 4/Tony Hawk's Pro Skater 4.app
- com.aspyr.thps4
Frameworks
/Library/Frameworks/Adobe AIR.framework
- com.adobe.AIR
/Library/Frameworks/DivX Toolkit.framework
- com.divx.divxtoolkit
/Library/Frameworks/EWSMac.framework
- com.eSellerate.EWSMac67108868
/Library/Frameworks/HPSmartPrint.framework
- com.hp.print.HPSmartPrint
/Library/Frameworks/MacFUSE.framework
- com.google.MacFUSE
/Library/Frameworks/PrintMeSSL.framework
- com.efi.printme.ssl
/Library/Frameworks/TSLicense.framework
- net.telestream.license
PrefPane
/Library/PreferencePanes/DivX.prefPane
- com.divx.divxprefs
/Library/PreferencePanes/Flip4Mac WMV.prefPane
- net.telestream.wmv.prefpane
/Library/PreferencePanes/MacFUSE.prefPane
- com.google.MacFUSE
Bundles
/Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
- info.emagic.driver.unitor
/Library/Contextual Menu Items/ParallelsCM.plugin
- com.parallels.cmplugin
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/AdobeCP15.plugin
- com.adobe.adobecp
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Flash Player.plugin
- com.macromedia.FlashPlayer-10.6.plugin
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/adobecp.plugin
- com.adobe.adobecp20
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
- com.divx.DivXBrowserPlugin
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
- net.telestream.wmv.plugin
/Library/Internet Plug-Ins/GarminGpsControl.plugin
- com.garmin.GarminGpsControl
/Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/iPhotoPhotocast.plugin
- com.apple.plugin.iPhotoPhotocast
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Printers/Macromedia/PDEs/FlashPaperPDE.plugin
- com.macromedia.flashpaper.pde.FlashPaperPDE
/Library/Printers/PPD Plugins/AdobePDFPDE.plugin
- com.Adobe.print.AdobePDF.pde
/Library/QuickLook/GBQLGenerator.qlgenerator
- com.apple.garageband.quicklookgenerator
/Library/QuickLook/ParallelsQL.qlgenerator
- com.parellels.quicklookgenerator
/Library/Spotlight/GBSpotlightImporter.mdimporter
- com.apple.garageband.spotlightimporter
/Library/Spotlight/Microsoft Entourage.mdimporter
- com.microsoft.entourageMDImporter
/Library/Spotlight/ParallelsMD.mdimporter
- com.parallels.mdimporter
/Users/USER/Library/Application Support/Google/Chrome/PepperFlash/12.0.0.70/PepperFlashPlayer.plugin
- com.macromedia.PepperFlashPlayer.pepper
/Users/USER/Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library paths
/Applications/Karaoke Maker/libmp3lame.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/Frameworks/libwchar.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/CoreTypes.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/LibCURL.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/LibCrypto.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/LibSSL.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/SystemFrameworkUtils.dylib
/Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/ZLib.dylib
/Library/Application Support/Adobe/OOBE/PDApp/DWA/DWANative.dylib
/Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/ARKCmdCaps.dylib
/Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/ARKCmdFS.dylib
/Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/ARKEngine.dylib
/Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/AdobePIM.dylib
/Library/Application Support/Adobe/OOBE/PDApp/LWA/PWANative.dylib
/Library/Application Support/Adobe/OOBE/PDApp/LWA/adobe_caps.dylib
/Library/Application Support/Adobe/OOBE/PDApp/LWA/adobe_oobelib.dylib
/Library/Application Support/Adobe/OOBE/PDApp/LWA/adobe_upgrade.dylib
/Library/Application Support/Adobe/OOBE/PDApp/UWA/UWANative.dylib
/Library/Application Support/Adobe/OOBE/PDApp/core/AdobePIM.dylib
/Library/Application Support/DivX/Libraries/libDivXDesktopSupport.dylib
/Library/Application Support/DivX/QtPlugins/accessible/libqtaccessiblewidgets.dylib
/Library/Application Support/DivX/QtPlugins/iconengines/libqsvgicon.dylib
/Library/Application Support/DivX/QtPlugins/imageformats/libqgif.dylib
/Library/Application Support/DivX/QtPlugins/imageformats/libqico.dylib
/Library/Application Support/DivX/QtPlugins/imageformats/libqjpeg.dylib
/Library/Application Support/DivX/QtPlugins/imageformats/libqmng.dylib
/Library/Application Support/DivX/QtPlugins/imageformats/libqsvg.dylib
/Library/Application Support/DivX/QtPlugins/imageformats/libqtiff.dylib
/Library/Application Support/DivX/QtPlugins/script/libqtscriptdbus.dylib
/Library/Application Support/DivX/QtPlugins/sqldrivers/libqsqlite.dylib
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
/Library/Frameworks/MacFUSE.framework/Versions/A/Resources/Debug/libfuse.dylib. dSYM/Contents/Resources/DWARF/libfuse.dylib
/Library/Frameworks/MacFUSE.framework/Versions/A/Resources/Debug/libfuse_ino64. dylib.dSYM/Contents/Resources/DWARF/libfuse_ino64.dylib
/Library/Printers/hp/Frameworks/HPDeviceModel.framework/Versions/3.0/Frameworks /Core.framework/Versions/3.0/Libraries/libHPIOnetsnmp.5.dylib
/Library/Printers/hp/Frameworks/HPSmartX.framework/Versions/B/Resources/lib/SxC FReader.dylib
/Library/Printers/hp/Frameworks/HPSmartX.framework/Versions/C/Resources/lib/SxC FReader.dylib
/Users/USER/Library/Application Support/AOL Desktop/Security/libnspr4.dylib
/Users/USER/Library/Application Support/AOL Desktop/Security/libnssckbi.dylib
/Users/USER/Library/Application Support/AOL Desktop/Security/libplc4.dylib
/Users/USER/Library/Application Support/AOL Desktop/Security/libplds4.dylib
/Users/USER/Library/Application Support/Firefox/Profiles/w5owlxqa.default/gmp-gmpopenh264/1.1/libgmpopenh264.dy lib
/Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.6.758/_platform_specific/mac_x64/libwidev inecdm.dylib
/Users/USER/Library/Caches/com.apple.ScreenSaver.Engine/com.apple.vision/com.ap ple.vision.64FaceCoreCLKernel.dylib
/mike's old computer/adobe applications/Adobe Version Cue/libpbodbc3.dylib
/mike's old computer/adobe applications/Adobe Version Cue/libps-gcc2-v8_50.dylib
/mike's old computer/adobe applications/Adobe Version Cue/libps-jni-gcc2-v8_50.dylib
/mike's old computer/adobe applications/Adobe Version Cue/libps-pb-gcc2-v8_50.dylib
/mike's old computer/adobe applications/Adobe Version Cue/libps-rw-gcc2-v8_50.dylib
/mike's old computer/adobe applications/Adobe Version Cue/libps-util-gcc2-v8_50.dylib
/mike's old computer/adobe applications/Adobe Version Cue/tomcat/webapps/ROOT/WEB-INF/components/com.adobe.bauhaus.nativecomm/res/VCF oundation.dylib
/usr/lib/libgutenprint.2.0.3.dylib
/usr/local/lib/libfreetype.6.3.16.dylib
/usr/local/lib/libfreetype.6.dylib
/usr/local/lib/libfreetype.dylib
/usr/local/lib/libfuse.2.dylib
/usr/local/lib/libfuse_ino64.2.dylib
Installations
Norton AntiVirus Application: 6/20/10, 10:21 PM
Symantec Scheduler: 6/20/10, 10:21 PM
Microsoft® Silverlight™ Browser Plug-In: 6/19/10, 8:25 PM
Parallels Desktop 5 for Mac: 6/10/10, 6:02 AM
MacFUSE Core: 6/10/10, 6:03 AM
Elapsed time (sec): 317
<Edited By Host> -
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.
As well as what a brody asked :
- do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
- do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
- do you need to do maintenance, e.g. clearing out caches and unused logs, etc?
Maybe you are looking for
-
In generic extration how to create view
HI In se11 i try to create view using two table vbap and vbak . vbak mandt vbap mandt vbak vbeln vbap vbeln for join condion and
-
DateFormat.parse() reads 12:00:00 as 00:00:00?
Hi, i have a method, which uses DateFormat.parse() function, and i want to check whether a date and time input is valid. as you can see from the following code; i have defined the format as (dd-mm-yyyy at hh:mm:ss). the problem is, if i pass a string
-
The button "More info" (in window "About this Mac") is inactive
Hi! I'm really don't know what is the problem. 2 days ago it worked. MacAir (Lion 10.7.3.) Thank you in advance
-
Crossdomain.xml just not working
Hello, I am having problems moving my application from my Local Machine to a DEV/TEST server for testing. My app uses C# Web Services for data access and is a Flex front end. Here is the error I get (only on the DEV/TEST server): A Fault occured cont
-
I have the additional content still asks to download in 10.1
Hello all, I upgraded to 10.1 and downloaded all the additional content and I love the new features and patches. However, logic keeps asking me to download additional content totally 5.0gb The only things I see in the additional content window are a