Query - Sampling speed in Device Control - Audigy Value

After installing the Hardware / Drivers etc for SB Audigy Value PCI card, Windows Control Panel shows one option named Device Control . Clicking on it opens a window wherein you can set the sampling speed for PCI/USB and SPDIF.
In case of PCI, I notice that the only two options 48 & 96 KHz are available. I would have expeted even 44. but it'ss not there..is this normal behavior of this control i.e. not to have 44. sampling option for PCI.
Thanks

chapas wrote:
Hello. Does the Audigy Value have true 24-bit support? I see a Creative application named "Device Control" that has some 24bit options, but I don't know if these are correct. Is 24-bit supported by software or hardware? If I change the option in "Device Control", will Winamp play in 24-bit's Thanks!
Yes audigy value has 24 bit support, winamp and all cd audio only support 6 bit,except HDCD it suppports 20 bit but only when you play it in HDCD player, and in windows you can play it using Windows Media Player 0Message Edited by Clickm3 on 04-08-2006 2:20 AM

Similar Messages

Audigy Value: "Device Control" tool: what does it

Hello. Just bought an Audigy Value and I would like to try 24 bit sound. I found this tool that came with the drivers and tools named "Device Control". I can change from 6 bits to 24 bits and change from 48khz to 96khz there. But I don't know what is changing... recording, playback? I read the help file that came with the program but it does not help. Can you tell me where do I notice a change when I change the settings within the "Device Control" ? Thanks!

This error is because the order of your numerator is higher than the order of the denominator of your transfer function. This is an impossible physical situation and leads to a delta function and its derivatives in the output response. Physically realizable systems must have the order of the denominator in the transfer function greater than the order of the numerator.
Marc

SB Audigy Value CMSS Successfully Enabled in Vista, if you call it CMSS

I've been trying to enable CMSS (at least hear sound from all of the 4 speakers) for a long time and finally successed but in a very strange way.
Steps written below are spesific to my system (SB Audigy Value, Onboard Realtek ALC 850) but can? work similar way on others i guess. For SB Audigy Value 6 Feb. Vista drivers are installed. U can use old XP drivers as explained in the forum too.
I've been using my onboard audio device (realtek ac97) since I can't enable cmss on SB Audigy Value, so Realtek AC97 audio drivers were installed on my system. You can download Realtek AC97 audio drivers? from [url=ftp://202.65.94.22/pc/audio/623_Vista_APO.zip">ftp://202.65.94.22/pc/audio/623_Vista_APO.zip[/url]
Download and install it (first enable the device from bios if you haven't)
After installing the drivers,
-) Open "Playback Devices/Speakers(Realtek A'97 Audio)/Properties" window and open "Enhancements" tab.
2-)There's a "Speaker Fill" effect there. U can take sound from all speakers if u enable it on Realtek AC97 device. And let's import this to our SB Audigy Value device. I say "Import" because i noticed that?"Enhancements" tab is actually a set of registry entries which points to some features from Realtek device. So,
3-) Open registry editor. Go to
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\MMDevices\Audio\Render\
Under the Render key the playback devices are listed as some numbers and letters like,
{50a7cf0-aad0-444c-a56b-ce655444d}
4-) U have to find your own device (realtek speakers) , for instance my device is represented by {50a7cf0-aad0-444c-a56b-ce655444d}.
(This is for Realtek ALC 850 model, may be different for other models?I guess)
5-) Under {50a7cf0-aad0-444c-a56b-ce655444d} key you can see "FxProperties" Key. Rightclick on it and export to a file. Save it as RealtekCMSS.reg for instance.
6-) Then find your SB Audigy Value Speakers device. (ES/LS whatever...)
Mine is {5ecbbccc-eca-446-aa2-a7390cf094f6}.
7-) Rightclick on it and select "Permissions"
Go to Advanced/Owner, and change the owner to administrators.
(Don't forget to select "Replace owner on subcontainers and objects)
8-) On "Permissions for {5ecbbccc-eca-446-aa2-a7390cf094f6}" window select "Administrators"
and select "Full Control" to allow. Then click OK.
9-)Close registry editor and open RealtekCMSS.reg in notepad.
0-) Replace {50a7cf0-aad0-444c-a56b-ce655444d}
????to {5ecbbccc-eca-446-aa2-a7390cf094f6} using replace function.
-)Save the file as SBAudigyCMSS.reg and execute it.
2-)Now go to
"Playback Devices/Speakers(SB Audigy)/Properties" and you'll see "Enhancements" tab.
3-)In "Enhancements" tab enable "Speaker Fill"
Open an mp3 and test your speakers. Other effects work too.
From now on you can disable your AC97 device from bios. But don't uninstall Realtek software.
Message Edited by atabrk on 04-26-200708:09 PM

The previous post is inaccurate:? CMSS includes many modes, which will work depending on the speaker configuration. This means that CMSS set?to ON on 5. speakers is not the same as CMSS on Headphones. The selection is done automatically, depending on your selected speaker configuration. For example CMSS on headphones uses HRTFs to produce the effect, while on multi-speaker systems it simply maps and pans the sound. From my experience, CMSS works?good on headphones, not only for games, but for music as well. It expands the soundfield, where on simple stereo and headphones you normally hear the sound inside your head. My opinion is, that CMSS sounds much better on headphones than on speaker systems.

Windows Vista vs. Sound Blaster Audigy Value = Problem

I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
I will be extremely thankful to you if you please provide a solution to these problems.
Thank You........

altho i tried this with audigy se u might wanna check this
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

New Audigy Value card completely nonfunctional in windows server 2

Hi all,
I just bought a new Creative Audigy Value card for use in a windows server 2008 system that will control the electronic school bells system in the academy I work at. It's desperately important that we get a sound working on this server so that the bells can ring again.
Anyway, so here's the problem - the sound card, once installed, says that it is installed properly (i've used x64 vista drivers .0077 and .0065A from creative's website, installed and reinstalled several times) but in the vista system tray, it just shows the speaker with the X on it. When you click "go to mixer" it says "there are no audio devices installed."
In the audio properties, you can see the icon for the "sound blaster audigy", but although you can SEE the buttons for "configure" and "test" - clicking on them yields nothing at all.
I'm really at my wit's end here. The school needs its bell system, which this server plays through it's sound card. What can i do to get this sound card working like it's supposed to be? any ideas?

Yes, well, the box in the store had a sticker on it that said it was compatible with Windows Vista 64bit and 32bit, so I assumed that a 64bit server would be fine for it, but perhaps my assumption was incorrect.
At least if you tell me, that you're 00% sure that this card is not compatible with Server 2008, I will be able to move on and look for something else and use this card for a workstation instead.
As for the first commenter - thanks, but yeah I had already made sure that both the audio service and audio endpoint driver were automatically starting up with the server, so that's not the issue.
So, Mr/Ms Creative Moderator - I checked the page and it does not specifically mention Server 2008, just Vista. Can you let me know for sure that this card is not compatible? If you can tell me no, at least I can write it off as a stupid mistake. If you tell me that it should work though, I feel like I will have to keep trying to force this one to work.
Thanks!

Audigy Value: true 24-bit suppo

Hello. Does the Audigy Value have true 24-bit support? I see a Creative application named "Device Control" that has some 24bit options, but I don't know if these are correct. Is 24-bit supported by software or hardware? If I change the option in "Device Control", will Winamp play in 24-bit's Thanks!

chapas wrote:
Hello. Does the Audigy Value have true 24-bit support? I see a Creative application named "Device Control" that has some 24bit options, but I don't know if these are correct. Is 24-bit supported by software or hardware? If I change the option in "Device Control", will Winamp play in 24-bit's Thanks!
Yes audigy value has 24 bit support, winamp and all cd audio only support 6 bit,except HDCD it suppports 20 bit but only when you play it in HDCD player, and in windows you can play it using Windows Media Player 0Message Edited by Clickm3 on 04-08-2006 2:20 AM

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

Disabling Vehicle iPod Device Control

Hi all,
I recently purchased a 2008 Merecedes Benz C300 with the iPod connector built in. When my iphone is connected the vehicle instructs the iPod app to immediately start playing content. There's no way to stop it, but there are some rudimentary controls that can be accessed through the steering wheel.
As I'm starting to use more and more audio based apps (audible, etc), things are getting complicated. Quicktime audio playback through Safari or iTunes for podcasts often gets overridden by the iPod app almost immediately after the play button is pressed. Some apps do work, others immediately surrender to the iPod app.
My question is what pins pass device control data between the phone and vehicle? I recently purchased an extension cable (by default the cable lives only in the glove box) so my plan was to snip the wires from the extension cable that carry the device control data.
I have a feeling audio will continue to feed through the vehicle when the aux mode is selected regardless of whether or not it can talk to the iPhone. I'd prefer to risk my $30 cable than spend another $200 to uninstall the iPod integration kit.

Hi there:
Sorry to trouble you again with this but you have been the only person to respond to my earlier query with a sensible and helpful response. Following your suggestion earlier I went to an Apple store intending to buy a new cable but thought I would check with the Genius Bar anyway. As it turns out both my itunes and my ipod are fine as is my cable so there was no need to buy a new one. The assistant there suggested that there wasn't enough power coming through my laptop USB port to power my ipod device. For lack of an alternative explanation, this seems acceptable to me but entirely inexplicable as I work off my 1TB external hard drive with my laptop ALL the time and never have a problem powering that. I fail to understand how a laptop USB port that emits enough power to read a 1TB device can fail to read a 120GB ipod.
However as an alternative the genius bar assistant suggested the following: - He said that I could still continue to download new music on my problem laptop but could simply copy and paste the itunes library folder into another laptop to PC under the My Music area and then sync my ipod with that. It seems like a sensible alternative but having heard horror stories of people struggling to sync different computers and devices with Apple content, I would like a second opinion from you if you think this would work. I once had trouble moving my itunes library from my D drive to C drive in the same laptop so the thought of copying my itunes library into an entirely different computer terrifies me. I dont want to lose my music on which I have spent a fortune. Do you think the genius bar assistant's suggestion would work?
Really sorry for the trouble but I would really appreciate a second opinion. Thanks.

Windows 7 can use Graphic Equalizer? (Audigy Value)

Hi, i'm new user?
now i use sound blaster audigy value but driver in cd driver not support windows 7 (Bluescreen)
and i want to use graphic equalizer, please help me?
Message Edited by materialise on 03-28-2009 05:03 [email protected]

Maybe you have installed all this stuff in wrong installations order. I have installed Win7 32 bit on friends Satellite A500 following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - works properly.
-Synaptics driver
Everything works perfectly including hardware setup. I don't know maybe you should install Win7 again following this installations order.
By the way: hardware setup was shown in control panel in WXP but since Vista not anymore. So I asked you this question because I know for sure it is not in control panel anymore.
Since Vista Toshiba packed all tools and utilities overview in Toshiba Assist.

Help on Audigy value soundc

Hi,
I just bought the Audigy value soundcard, but when I installed it using the drivers provided in the CD. My windows volume control is displaying chinese characters instead of english, also the creative surround mixer display ? instead of the proper words(guess it cannot decode the chinese wordings). Anybody knows how to fix this problem? thanks?[IMG"]http://i29.tinypic.com/2vbrbec.jpg[/IMG]?[IMG"]http://i28.tinypic.com/6ep7cp.jpg[/IMG]

int i = Integer.parseInt(x);
Will convert the String to an integer.The original poster was looking for a way to convert a single digit in a string to its numeric value, not to convert the whole string to an integer.
I forgot to mention that this is contained in the
java.text package, so you will need to
import java.text.*;Integer is in the java.lang package, so no import is necessary.

Audigy Value users.. enter your vista 32bit problem here

i am experiencing a problem from the driver release of SB audigy value for vista 32 bit?my card is sound blaster audigy value 24 bit 7. st I install the driver... works great2nd... play games..3rd...play music mp3's4rth restarted my computer5th play again...6th restarted again...7th after windows vista open... its automatically detecting pci to pci bridge, and multimedia audio controller(means it got disconnected automatically and been detected again and reset it's setting to default)?8th... when i click the playback devices @ the taskbar and click speaker and go to properties, advance... 96khz and 24 bit is gone... i can make it work again by uninstalling the driver and all of its components and intall it again... and then a few restart later the problem will happen again?i've'' been testing this alway's? when i am using winxp i did not experience anything like this before.. check my board and soundcard to other pc which have win xp its working great... so that mean's your driver has a problem... it's about compatibility....
kindly help me with this problem... thanks...

Hi, thanks for your answer!-)
I cought some virus and I think it was hidden in power saver and after the infected file was deleted, I turn on my notebook and the first message what I see is that the toshiba power saver has an error and would be closed. I don't know what power saver it was, I've tried to install a driver for XP , but it doesn't match here.
Sorry for my english =)

SB Audigy Value Windows XP applications All functions includin What U Hear working Proper

I have SB Audigy Value Card (SE/LS/ Li've 24 bit)Windows Vista 32 bit SP Classic Windows XP applications, Creative EAX SettingsCreative Graphic EqualizerCreative Speaker SettingsDevice Control And XP Drivers 5.2..54 Driver Date: 3.06.2007 Digitally Signed All the settings including "What u Hear" function work flawlessly under 4. system. (I didn't try 5./7. but I think it should work) I just mixed the applications from old and new driver packages and tricked the set-up program to install the XP drivers instead. I'm not a sound expert but I'm much more satisfied with tihs driver especially while listenig to music. I didn't try it with any games so I don't know. Download Link:http://rapidshare.com/files/9395098/...e0077.exe.html All the files included in this package are Creative's property.

I've spent ages searching the forums and can find other people who have experienced the problem but have yet found a fix. They've also explained the problem better so I'll try and make this a little clearer also.
When using Ventrillo first people can hear me fine in Ventrillo but an awful sound (described as the sound of 000 demons) in Counter Strike.<
When using CS first people can hear me fine in Counter Strike but the screeching sound is heard in Ventrillo.<

Audigy value....installed but no so

This problem is driving me insane!!!I had issues with my onboard sound (DFI AD77 mobo) in my HTPC so I bought an Audigy Value card hoping I'd have no problems...ha ha..Although the card and drivers seem to install ok, I have no sound at all. Dxdiag gives an error message.."failure at step 3....HRESULT=0x88780078 (no driver)" and media player says something like cannot play, there may be a problem with the audio device... I have disabled onboard sound, tried a few different pci slots, used the latest creative drivers, updated chipset drivers...everything!!!! Device manager is showing the card and everything seems ok ie. drivers are installed, no exclamation marks, etc?Can someone pleeeeease offer some more advice on what I can try

I just tried this card on my other pc and it seems to work fine. But I need it in my other pc. Can anyone suggest what to try now??

Does audigy value oem have bass and treble contr

Hi guys, i just bought an audigy value oem today and i'm using vista x64, for some reason i can't seem to find the sliders for bass and treble control, i've installed the 64bit drivers for vista and the sound card works like normal, but i upgraded from a soundblaster li've value and even that had bass and treble control but it was in win xp so is it the card or vista?thanks guys.

Hi guys, ............it is here by to inform that I used the "sound blaster li've value (5.) few months ago. but now I've upgraded to 'sound blaster Audigy value (7.). but I can't find any bass and treble option in XP and Vista.
I think creative don't give the option with the 'sound blaster Audigy value' card.
what u think about it's
If it possible so please inform me anybody......my ddress is here ([email protected])

Query - Sampling speed in Device Control - Audigy Value

Similar Messages

Maybe you are looking for