Query selection screen problem

Dear all,
We have turnover per companycode report in our portal. When the selection screen appear for the query I tried to press f4 help to get the list for Supplier. But this not getting displayed. Can you please let me know the reason why this happens ?
For all the remaining field selection i could get the list except the supplier field.
I also tried checking the master data and SID table for supplier. they have data in the table.
Please let me know the problem & from wher the data is retrieved when we process f4 help.
Thankyou!
Bala

Hello there,
There are settings at info object level and Query designer level. At info object level for the characteristic, go to the tab Business Explorer and check the settings for the Query filter value. Similarly check the settings for the characteristics which show values for f4 help.
Also there is a similar setting for the info object at query designer level with similar names in the properties pane of the characteristic.
Check them and set it accordingly.
Regards
Joga

Similar Messages

BEx query selection screen takes long time to popup

Hi,
I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
I have run the statistics of the query and according to the statistics report the query takes a lot of time for the following component :
OLAP: Query Gen. 2681,312682
I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
Please advise how to proceed.
Thanks in advance,
Arash

Hi,
Please check the following notes which should be useful.
1387593 - Performance optimization for query change/generation
1416737 - Performance optimization for query change/generation(2)
1396485 - Performance optimization for query check/save
Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
1472915, 1506560) and repair/correct the different tables to optmize
the query definition tables.
Regards,
Amit

Check box in SAP Query selection screen

I want to keep 2 check box in SAP Query selection screen.
could you please tell me any one.
regards,
kumar

Hi Vijay,
If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
You can find the name of the generated program of the query when you execute the query.
Reward points if useful.
Regards,
Atish

F4 search-help in infoset query selection-screen fields

Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia Gonçalves

Hi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves

Query Selection screen field validatoin

I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
How can this be achieved ?
I tried looking for exits but did not find a relevant one.
Thanks in advance.

Hello,
You need to write a routine in SMOD for selection screen validations.
It will come in i_step = 3. please refer foll code as example:
The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
DATA: LI_VAR like rrrangeexit,
       wa_t_var_range like LI_VAR,
       count type i value 0.
IF i_s_rkb1d-infocube EQ 'CUBE1' or
   i_s_rkb1d-infocube EQ 'CUBE2'.
Check whether only one of date variable is entered in variable screen.
IF I_STEP = 3.
    Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
      if wa_t_var_range-low > sy-datum.
        CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
          EXPORTING
            I_CLASS = 'RSBBS'
            I_TYPE   = 'E'
            I_NUMBER = '000'
            I_MSGV1 = 'Enter date less than or equal to current date'.
        raise again.
      endif.
ENDIF.
ENDIF.
Regards,
Shashank

Query Selection Screen restriction

Hello All,
In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
Can this be achieved? If yes how.
Regds,
Shashank

Hi,
You can try out, customer exit with I_STEP = 3.
using which a exception will be raised if user enters value for more than one variable.
Hope it helps......
Regards,
Umesh.

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

Addition of checkbox and 2 fields in ABap query selection screen

Hi
I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

Validate plants selected in Abap Query selection screen

Hi Everyone,
I have a requirement wherein i have to validate 'authority check' for the plants populated in the selection screen in an already created abap query.
I tried adding code in the code section. But i dont know how to use the select-option parameter. It already exists(VBAP-WERKS) in the table which is used for join, so i cannot add it in the additional fields. Am i correct ?
Also, i saw that the report program for this query uses this parameter sa SP$00008. I tried using it but it gives an error The IN operator with "SP$00008" is followed neither by an internal table nor by a value list.
Please help.
Also, please advice whether this requirement can be catered in this query alone? or should i go with writing a new report program for this? ( i personally feel that this would beat the purpose of using Abap Query. )
Regards,
Tarun

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

Missing parameters on Bex query selection screen

Hi,
we are using BW3.5 (support pack 18) and one of our users has created a number of variants for a particular query which he executes via the Bex Analyser. The problem is, when ever he runs this query now, all the fields that he populated in his variants no longer appear on his selection screen - even if we delete all the variants.
He did not choose to hide any fields (in the variant) and he has not set any personal values in personalisation.
Can anyone please help?
Thanks,
John.

Hi Ozan.
Thanks for your reply however my problem was that the fields were no longer displayed on the selection screen thus there was no buttons to select for the personalisation settings therefore no way to turn off the personalisation.
However I discovered that if I executed the query using transaction RSRT the full selection screen was displayed and I could access the personalisation buttons for the parameters that had personalisation.
Thanks anyway.

Infoset Query Selection Screen Issue

Dearf Experts,
I am a SAP-PM functional area. (Do know very little about technical sideof SAP)
I am working on SQ03/SQ02/SQ01 for the first time to create an Infoset query.
The output screen is incontrol and showing all the fields as per my specifications.
My problem is the Selection Screen. This is displaying to many things not desired by me.
1. Two tabs (I do not expect any tabs)
2. Many Screen areas, repeating the fields (1000,0100,0101,0102,0103)
The screen area of my specified fields in at the bottom.
My expectations about the selection screen is - just like simple one as in the case of SQVI.
Please help me in getting through this problem.
Regards
Jogeswara Rao

Gungor Ozcelebi,
Thank you very much for responding,
Exactly as you said, I am using Notifications logical database.
(I was suspecting this reason)
Infact I found about 8 fields (Perhaps related to Date fields, checkboxes etc) are automatically selected from the LDB.
My trials to delete them were invain. They reappear while saving.
I would be very thankful, if you help me in this case.
Regards...

Sorting Currency conversion Variables in Query Selection screen

Hi Experts,
I have an issue in sorting variables.
A Currency translation is used here which has two selection options here, one for "Currency" and one for "Currency conversion date". They just pop in somewhere in the selection screen with out order. I want to put them together either in the middle or at the bottom.
They are not visible in the Variable sequence tab of query properties.
I changed the text for each of them (Ex. "XCurrency"), so that it sorts alphabetically, but no difference.
Had anybody come accross this issue before.
regards
G Rai

Hi,
This seems strange that the variable does not show in the query properties. One thing I can suggest it to try changing the technical name/desciption of the variable if that changes the order.
Please update back the thread if that helps.

Standard PNP selection screen problem in reason for action type

Hi all,
We have used standard PNP in one of our report program.
The input for 'Reason for Action' (excluding a particular reason for action ) has no effect on the actual selection of data from the PNP. i.e. even if a particular reason for action is excluded in the selection, record pertaining to that action for reason is still picked in the PNP selection and passed on to the program through Get PERNR statement.
The above problem seems to affect all the standard and custom HR Reports as well.
Please advise on how exactly the excluding of a particular reason for action work in selection through PNP and is there anyway to solve the problem.
eagerly waiting for your response.
Thanking You,
Regards.
Deepak

Thanks for your response,
We tried but it did not work.
Our code is as follows,
INITIALIZATION.
W_REPID = SY-REPID.
PERFORM CREATE_RANGES.
START-OF-SELECTION.
GET PERNR.
RP-PROVIDE-FROM-LAST P0000 SPACE PN-BEGDA PN-ENDDA.
PERFORM GET_DATA.
END-OF-SELECTION
If you could give us your email id, we would email the screen shots of the selection screen and the output.
my email id - [email protected]
Thanking You,
Regards
Deepak

Two selection screen problem in one report

i have a two selection screens 1000 & 2000 in single report , which needs to be executed one after the other ,
the problem is when i execute second selection screen(2000) , the cursor is going back to at-selection-screen once again.
but i need to trigger start-of-selection directly after executing second selection screen,
the first selection screen 1000 will be executed with the help of select options..
the sample code is below .
at-selection-screen.
    perform validations.
   call selection screen 2000.
    at selection screen on value request p_adm
start-of-selection.
   main logic

Moderator message - Cross post locked
Rob

SQ01 - Include a check box on ABAP query Selection screen

Hi Experts,
For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
Please tell me how do i do this.
Thanks
Venkata Pradeep.

In infoset, Extras code tab
Code section: At selection-screen output
Do something like below:
IF radiobutton1 = 'X'.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
               screen-input = '1'.
               screen-invisible = '0'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ELSE.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXX'.
               screen-input = '0'.
               screen-invisible = '1'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ENDIF.

Query selection screen problem

Similar Messages

Maybe you are looking for