Query Stripping should not be used when Aggregrate Awareness enabled.

Hi
We are having SAP BO 4.0 and underlying database is Teradata.
We are using Aggregrate awareness concept and we are having single Universe for our modules which is quite complex consisting of many tables.
each report we have created seperate queries for each functionality.
So does query stripping should be enabled/or should not be used when we have agrregrate awareness been used more widely.
Thanks in advance.
regards
Gaurav.

Hi Gaurav Mang,
This feature is not available for RDBMS in SAP BO 4.0 but it is available in BO 4.1 for RDBMS Database.Check below links for details
http://evtechnologies.com/query-stripping-in-sap-businessobjects-web-intelligence-4-1/
http://scn.sap.com/community/businessobjects-web-intelligence/blog/2012/05/11/performance-tuning-of-bo-report-with-query-stripping-feature
Regards,
Anish

Similar Messages

Why doesnt HP state USB 3.0 should not be used when creating "Restore" software on a flash drive?

about 2 weeks ago I received my HP DV7TQE with Windows 7 64 Bit. First thing I did was create a "restore" backup media just in case for future use. I used a ScanDisk Cruzer 32GB Flash Drive (memory stick). The stick was in one of the USB 3.0 ports while I was creating my "restore" software. On Friday night I performed a test just to make sure my "restore" would work. Unfortunately it did not. I got "the boot selection failed because a required device is inaccessable" message. After some surfing on the Internet I found out that USB 3.0 should not be used to create a "restore" software. My question is why would HP leave this little detail out from the intructions provided on the laptop at the time I was creating this?

From what I have found out it is ok to make the media on a usb 3.0 port, you just cannot restore using a 3.0 port, it should work from a 2.0 port.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02906094&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...

The server farm account should not be used for other services

I have created a new SharePoint Foundation 2013 Farm. I only used the Farm Configuration Wizard to create the Search Service Application, all other aspects of the Farm was created using PowerShell.
The SharePoint Health Analyzer is reporting the following error:
Title: The server farm account should not be used for other services.
Severity: 1 - Error
Category: Security
Explanation: DOMAIN\FARM_ACCOUNT, the account used for the SharePoint timer service and the central administration site, is highly privileged and should not be used for any other services on any machines in the server farm. The following services were
found to use this account: Distributed Cache Service(Windows Service)
Remedy: Browse to
http://centraladminsite:port/_admin/FarmCredentialManagement.aspx and change the account used for the services listed in the explanation. For more information about this rule, see "http://go.microsoft.com/fwlink/?LinkID=142685".
Now I understand how to change the account used to run the Distributed Cache Service, but my query is what account should I use in the least privelage model? I have setup the following 6 accounts as per TechNet guidelines (Link)
and am not sure if one of these accounts should be used or if another account is required:
SQL Server service account
Setup user account
Server farm account
SharePoint Server Search service account
Default content access account
Application pool identity
After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity
Service, a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services
within the Farm?
Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
Kevin Evans

After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity Service,
a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services within the Farm?
Inder: Yes, It is suggested to have multiple service account for each service application. This increases security and dependencyof 1 account on multiple Service applications. Like below
SQL Server service
Local System account (default)
Setup user
Member of the Administrators group on the local computer
Server farm
Network Service (default)
No manual configuration is necessary.
SharePoint Server Search Service
By default, this account runs as the Local System account.
If you want to crawl remote content by changing the default content access account or by using crawl rules, change this to a domain user account. If you do not change this account to a domain user account, you cannot change the default content access account
to a domain user account or add crawl rules to crawl this content. This restriction is designed to prevent elevation of privilege for any other process running as the Local System account.
Default Content Access
No manual configuration is necessary if this account is only crawling local farm content. If you want to crawl remote content by using crawl rules, change this to a domain user account, and apply the requirements listed for a server farm.
Content Access
Same requirement as the default content access account.
Profile import Default Access
Same requirements as server farm.
Excel Services Unattended Service
Must be a domain user account.
http://technet.microsoft.com/en-us/library/cc263445%28v=office.15%29.aspx
Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
Inder: Each service account has a application pool and you can plan to use same application pool for multiple
service accounts if required. These application pool are then consumed by proxy connection
of each service application. On service application pool, you can see all the service applications and its proxy connection.
If this helped you resolve your issue, please mark it Answered

"The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?

I don't know what's wrong with my Mac Mozilla Firefox, version 3.6.8, but today, it started alerting me about an error message on the "Error Console". In every website I visit, it tells me: "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?
I saw a pop-up which did not allow me to click it when I scatter the windows on my Mac. I was using Private Browsing, with pop-ups disabled, but one pop-up managed to get passed my settings, and open in another window. It would not allow me to select it, so all I did was to close Firefox, and start a new session. So far, everything has been normal, I also deleted the cookies it installed.
But, I still keep seeing that "Error Console" notice under my "Tools" on the Menu Bar, and when I clicked on it, it listed errors (such as what I listed above).
Would someone explain this to me?
Thanks for your help!

The messages you see in the Error Console are mostly to assist the web site's author in resolving compatibility problems. Some of them can assist you in determining why a web site doesn't work as intended. The one you mentioned doesn't sound that suspicious, except that it occurs on many sites. Perhaps one of your add-ons is trying to monitor what you type?
To diagnose whether this is caused by an add-on or one of your settings, you could try the following:
First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that resolve the errors? If so, then an add-on usually is the culprit. If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
If the new profile works correctly, you can choose between further research on your old profile or moving key settings like bookmarks from your old profile to the new one. [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

GL Account Should not be used

Dear Friends,
For PO-4111127913, GL account 726234 was used in the PO - item details, invoice tab.
The user now says that the GL Account should not be used untill 2010.
What is the most simple way of blocking the GL? If any user tried to select the GL in the PO, he must not able to use it or the system should issue a warning or error message " you cannot use this GL Account".
Already Some POs with this GL Account 726234 has been posted. IR and FI Documents were posted. How to reverse everything from po,IR and FI Documents.
Please suggest?
Regards
Sridhar
Edited by: Sridhar M on Dec 8, 2009 1:24 AM
Edited by: Sridhar M on Dec 8, 2009 1:25 AM

Hi,
Blocking an account is usually done for closing and reconciliation purposes so that no further activity can be posted to that account. The account can be unblocked when activity can resume.
Menu Path
From the SAP R/3 screen, select the path:
Accounting >> Financial accounting >> General ledger >>
(new menu) Master records >> G/L Accounts >> Individual Processing >> Centrally
Fast Path
At the Command Line, enter:
/NFS00
Block G/L Acct: Request Screen
Key Fields (Complete or Review)
Account number
Enter the G/L account number to be blocked / unblocked.
(F4) to access a matchcode.
Company code
Enter CUR for MIT.
Next Step...
(ENTER) to access the Block G/L Account Screen.
Block G/L Account Screen
Use this screen to block / unblock the account for different postings.
Key Fields (Complete or Review)
Posting block
All company codes
To block the account from being posted to CUR, the MIT company code, click in the box beside this field.
Planning block
All company codes
To block the account from planning, click in the box beside this field. Note: To unblock the account, click in the box to deselect.
Next Step...
(F11) to save the blocking / unblocking changes made to the G/L account. The Block G/L Acct: Request Screen reappears with a message that the changes were made.
Thanks,
Rajesh.

Billing documents should not be created when it is not released to accounti

Hi SD gurus,
In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
Please suggest a solution for this.
Regards,
Senthil.

Thanks giri.
For the following reasons, the billing documents are not released to accounting.
1. If the user wrongly chosen the billing type for the delivery.
2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
Hope this will be suffice to understand my issue and suggest a suitable solution.
Points will be rewarded.
Regards,
Kumar.

Om,schdule_ship_date should not be updatable when we change a request_date

Hi all ,
can you please help to resolve this issue?
In OM module Sales order form
we have request_date and schdule_ship_date and they are some default rules are defined
as sysdate for both the dates and thses should be effected once you save the form.
our requirement is schdule_ship_date should not be updatable when we change a request_date
for the already existing sales order(SO).
This can be achieved through form personalization.
Thanks & Regards
maruthi

Hi dgood76,
Becoz there are so many personalizations and dff customizations are done on the form .
If i remove the dependency is anything is effected .
Thank & Regards
maruthi

Schdule_ship_date should not be updatable when we change a request_date

Hi all ,
can you please help to resolve this issue?
In OM module Sales order form
we have request_date and schdule_ship_date and they are some default rules are defined
as sysdate for both the dates and thses should be effected once you save the form.
our requirement is schdule_ship_date should not be updatable when we change a request_date
for the already existing sales order(SO).
Thanks & Regards
maruthi

Duplicate.
schdule_ship_date should not be updatable when we change a request_date

Purchase Requisition attachments should not be modified when it is released

Hi Gurus,
I've requirement that i should restrict the Users not to modify, delete, and add any attachments when PR is released. pl help me in this
-Rajiv.

Thanks giri.
For the following reasons, the billing documents are not released to accounting.
1. If the user wrongly chosen the billing type for the delivery.
2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
Hope this will be suffice to understand my issue and suggest a suitable solution.
Points will be rewarded.
Regards,
Kumar.

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

Output type should not be triggered when error in invoice

Dear Experts,
I have this issue.
Whenever there is an error in the document, the output type should NOT be triggered.
But in my case, in spite of the error "Pricing error in item 0001"the output is getting triggered.
This is a Billing Document.VF03.
In NACE, it is linked to RSNASTED-->EDI_PROCESSING form routine.
i need your help in identifying, where should be looking for this check.
check: when error in document->do not post idoc via the output type.
where will i be able to find this check.
Please guide.
Regs,
SuryaD.

FORM KOBEV_907.
*{   INSERT         D94K915917                                        1
* Declaration for Constants
constants : lc_kschl type char4 value 'ZNTP', " Message type
            lc_h type char1 value 'H',        " CREATE TRANS. TYPE
            lc_v type char1 value 'V'.        " CHANGE TRANS. TYPE
IF komkbv3-trtyp EQ lc_h.        " CREATE
IF komt1-kschl <> lc_kschl.
*   Check o/p type ZNTP in the newly proposed o/ps in table NNAST
    READ TABLE nnast WITH KEY kschl = lc_kschl.
    IF sy-subrc EQ 0.
      sy-subrc = 4.
      EXIT.
    ENDIF.
ENDIF.
sy-subrc = 4.
CHECK : KOMKBV3-UVALL CA ' C'.
CHECK : KOMKBV3-UVPRS CA ' C'.
CHECK : KOMKBV3-UVALS CA ' C'.
CHECK : KOMKBV3-RELIK EQ SPACE.
CHECK : KOMKBV3-RFBSK EQ 'C'.
sy-subrc = 0.
ELSEIF komkbv3-trtyp EQ lc_v.    " CHANGE
IF komt1-kschl <> lc_kschl.
* Check o/p type ZNTP in existing o/ps in table xnast and NNAST
    READ TABLE xnast WITH KEY kschl = lc_kschl.
    IF sy-subrc EQ 0.
      sy-subrc = 4.
      EXIT.
    ENDIF.
    READ TABLE nnast WITH KEY kschl = lc_kschl.
    IF sy-subrc EQ 0.
      sy-subrc = 4.
      EXIT.
    ENDIF.
ENDIF.
    sy-subrc = 4.
    CHECK : KOMKBV3-UVALL CA ' C'.
    CHECK : KOMKBV3-UVPRS CA ' C'.
    CHECK : KOMKBV3-UVALS CA ' C'.
    CHECK : KOMKBV3-RELIK EQ SPACE.
    CHECK : KOMKBV3-RFBSK EQ 'C'.
    sy-subrc = 0.
ENDIF.
*}   INSERT
ENDFORM.
the above code is what i see in RV61B907

Purchase Requisition Attachement Should not be Modified when it is released

Hi Experts,
I've a requirement that, In ME52N, if the Purchase Requisition is Released then, the user should not add or delete or change the Attachments. Pl help me in this how to do.
Regards
Rajiv.

Thanks giri.
For the following reasons, the billing documents are not released to accounting.
1. If the user wrongly chosen the billing type for the delivery.
2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
Hope this will be suffice to understand my issue and suggest a suitable solution.
Points will be rewarded.
Regards,
Kumar.

LINGUISTIC index not being used when it should be - why?

We have Oracle 10g R2 and using the case insensitve feature within the database. We have 2 schemas, one called 'app' and the other 'crs'. The crs schema owns the all the tables, views etc and has granted select on its objects to schema app.
We have a 'after log on' trigger on schema app the executes the following:
execute immediate 'alter session set NLS_COMP=LINGUISTIC';
execute immediate 'alter session set NLS_SORT=BINARY_CI';
We have a people table containing 180,000 records defined as:
person_id varchar2(10) not null and primary key,
surname varchar2(200) not null
We have the following indexes on this table:
create index my_indx1 on people (nlssort(person_id, 'NLS_SORT=BINARY_CI'));
create index my_indx2 on people (nlssort(surname, 'NLS_SORT=BINARY_CI'));
create index my_indx3 on people (upper(surname));
So, when I run the following SQL as schema CRS:
select * from people where upper(surname) = 'xxxxxx'
it uses my_indx3 which is what I expect.
But when I run the same sql as schema app it does a full table scan when I expected it to use my_indx2. Why isn't it using my_indx2 - what am I missing here - do I need to include a hint into the sql?????
Cheers
John.

The first test is always to check the execution plan - especially the predicate section. Based on your description, a simple test case showed Oracle transforming the predicate as follows:
Before "alter session":
access (UPPER("SURNAME")='xxxxxx')After "alter session"
filter(NLSSORT(UPPER("SURNAME"),'nls_sort=''BINARY_CI''')=HEXTORAW('78787878787800') )Note the 'upper' that is still present - it looks like you need to create your index on the expression:
(nlssort(upper(surname), 'NLS_SORT=BINARY_CI'))Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk

PO wf should not be triggred when POs are created through RFC

Hi
My PO wf is working fine for POs created and changed. But it is getting triggered for POs which are created by Ariba system using RFCs.And since there is no Organization structure for the user id which is used in RFC, it is throwing an error.
Please let me know what can be done in this regard.
Thanks
Bhaskar

Hi Bhaskar,
you are telling that the reson of the error is, that the user for the RFC is on in the OM.
So, why not put this user there, or use a different user?
If you don't want a wf to be created by ariba.
you can use check function modules for it, or put the logc in the first step of the flow.
I can imagine that when a user is responsible for the event, that the workflow probably should have additional dialog steps, like control steps by other users. If however you use an automated system, you can assume that controlling the data isn't necessary, but other background processes should be executed by the flow.
In that case do it in the WF modelling, with conditions on the initiator.
Kind regards, Rob Dielemans
Message was edited by: Rob Dielemans

BUG: Printer default settings not being used when selected in Print Dialog Prompt

We have 2 styles of printers on our computers: and Epson Receipt Printer (paper size Roll Papper 80mmx257m) and a Dell printer (paper size 8.5x11)
Our issue is if use us the non-defaulted printer to print something in Internet Explorer, it overrides the default printer setting with its default settings of that non-default printer. When we try to use the default printer again, the settings will
not switch back to the appropriate settings of that default printer.
Example: (Epson selected as Default Printer in Windows 7 Professional)
I open IE and select print on a page. I select the Dell printer and hit apply to change the print settings to the default settings of that Dell. Everything prints fine. I then try that same page, but this time I select the Default Printer
(Epson) and hit "apply" in the Printer Dialog Prompt and print. The print out is of the paper size letter and not the default settings for the Epson which is Roll Paper. I look at the settings in the preferences from IE's Print Dialog
Prompt and it shows it will use the Paper Size: LT 8.5x11 in.
If I close and re-open IE and print that same page to the Epson without selecting the Dell I see that the settings are back to the defaults for the Epson and things print as they should.
Why doesn't IE use the default settings after selecting any printer and hitting apply in the print dialog prompt past the first change of printer selection?

Hi Dan,
This forum is to discuss HTML, CSS and Javascript for IE. Please post your thread on TechNET IE forum.
http://social.technet.microsoft.com/Forums/ie/en-US/home?forum=ieitprocurrentver.
Thank you for understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Query Stripping should not be used when Aggregrate Awareness enabled.

Similar Messages

Maybe you are looking for