Query to check BitLocker Status
Hello everyone,
I am running a query against a collection of computers to try to check the BitLocker encryption status of these machines. The query results are error codes like (0,1,2,4,13)! I tried googling around for these codes and couldn't find any doc on it.
does any one know what does these codes means as a result so I can interpret them?
The only one I could make some sense is the 1 meaning Success. I think!
Thank you very much in advance for any help on the topic.
I can partially help you. See here
http://msdn.microsoft.com/en-us/library/aa376483(v=VS.85).aspx
0
PROTECTION OFF
The volume is not encrypted, partially encrypted, or the volume's encryption key for the volume is available in the clear on the hard disk.
1
PROTECTION ON
The volume is fully encrypted and the encryption key for the volume is not available in the clear on the hard disk.
2
PROTECTION UNKNOWN
The volume protection status cannot be determined. One potential cause is that the volume is in a locked
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Similar Messages
-
Checking the status of the insert query in JSP
frendz,
i am working with JSP .i have some content to be inserted in the database.i have used the insert query in SQL for that.i am able to check whether it has been inserted properly in the SQL but i want to check the status of the insert query with its return value(so that i can confirm it does not return a error).so please help.The Statement#executeUpdate() returns an int with the row count. Get hold of it.
Also see the Statement API: http://java.sun.com/javase/6/docs/api/java/sql/Statement.html
Apart from this, I recommend you to use PreparedStatement instead. It will not only ease setting Java objects in a query (no hassle anymore with quotes), but it will also prevent you from SQL injections.
Prepare here: http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
SQL injections: http://en.wikipedia.org/wiki/SQL_injection -
Hi,
how to check the FNDSMListenerStatus from MT, i know we can use the APPS_sid is the MT listener, is there any other way to check the FNDSM Listener status,
ThanksHi,
From the OS, you can use tnsping <FNDSM_*> to check the status of th listener.
From the database, run the following query and make sure it returns something:
SQL> select CONCURRENT_QUEUE_NAME
from FND_CONCURRENT_QUEUES
where CONCURRENT_QUEUE_NAME like 'FNDSM%';You may also review:
Note: 735148.1 - How to Troubleshoot Concurrent Manager Start Up Issue Related to Service Manager
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=735148.1
Regards,
Hussein -
SCCM 2012 report with BitLocker status
I am not an expert in SCCM 2012 Report Builder and i am trying to create a report with>
computername(laptop),drive letter, bitlocker status
I can't find the property to use in report builder to read the drive letter and bitlocker status. Is there someone who can help me out or had a rdl report file for me ?
PS. creating a query in SCCM 2012 is easy and works...but how to create a report out of it ??SELECT dbo.v_R_System.Name0, dbo.v_GS_ENCRYPTABLE_VOLUME.DriveLetter0, dbo.v_GS_ENCRYPTABLE_VOLUME.ProtectionStatus0
FROM dbo.v_GS_ENCRYPTABLE_VOLUME INNER JOIN
dbo.v_R_System ON dbo.v_GS_ENCRYPTABLE_VOLUME.ResourceID = dbo.v_R_System.ResourceID
Please use the query above, you need to create your own data source of this Report. For more information, please ask at SQL forum, there is a dedicated SSRS forum for this kind of question.
Juke Chou
TechNet Community Support -
How to get "ShareWithMe" files with "check out" status?
Hello All,
I was working on try to get "ShareWithMe" documents via SharePoint 2103 Query APIS with CSOM and REST service.
Practically it works good using the "SharedWithUsersOWSUSER"
manage property from this way:
https://domain-my.sharepoint.com/_api/search/query?querytext='*'&querytemplate='SharedWithUsersOWSUser:"someone"
But, this search query is not working for files that has been set up to "check out", I
mean this scenary :
e.g
I upload a new file to my documents.
Check out the file.
Share this file with someone.
I could verify that "SharedWithUsersOWSUser" property has a empty value for check out files that has been shared with someone, and this it will be the reason for what the query displayed above is not working in this case.
an extra test that I did it was : change the file shared from "check out" to "check in" and then the query it worked as expected.
Is there some way to get also these files(with "check out" status) ? I can see that it works very well on OneDrive for business - "ShareWithMe" page, I mean all files that it were shared with the current user are listed there, without to
take into account if these files it were set up to check out or not. Please, some suggestion ?When the file is checked out and metadata is changed while it is checked out the search crawler will not pick up the change until it is checked in. When you make changes to a file while it is checked out they are considered temporary changes until they
are checked in.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer -
Error while checking the status of Oracle Cluster ware
Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [ GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [ CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1 STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS MThe permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work. -
How to display first row value returened from a query as checked as default in a report
How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
MudassarHi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
How to check the status of a job!!!
Hi,
i want to check the status of a job and also send a mail when a job is cancelled.
Is there any function module which does that , also i want check the jobs across various time periods and not of today....
Its urgent,
Answers will be rewarded,
Regards,
RohanHi Rohan,
You can get job information by <b>calling function "BP_JOB_READ".</b> If you pass the value btc_read_jobhead_only defined in LBTCHDEF, it will only return the
job header info into the export parameter JOB_READ_JOBHEAD. The job status
is set in JOB_READ_JOBHEAD-STATUS.
Alternatively, <b>you can just lookup table TBTCO</b>, the status is in
TBTCO-STATUS.
The values in STATUS are defined in LBTCHDEF as follows;
DATA:
BTC_RUNNING LIKE TBTCO-STATUS VALUE 'R',
BTC_READY LIKE TBTCO-STATUS VALUE 'Y',
BTC_SCHEDULED LIKE TBTCO-STATUS VALUE 'P',
BTC_RELEASED LIKE TBTCO-STATUS VALUE 'S',
BTC_ABORTED LIKE TBTCO-STATUS VALUE 'A',
BTC_FINISHED LIKE TBTCO-STATUS VALUE 'F',
BTC_PUT_ACTIVE LIKE TBTCO-STATUS VALUE 'Z',
BTC_UNKNOWN_STATE LIKE TBTCO-STATUS VALUE 'X'.
Thanks,
Vinay -
Checking the status of task records tied to the custom object 3
We are using custom object 3
There has been lot of configuration work done on this object.
There is a checkbox on the UI. When a user will checks off the check box, a task record(s) is created depending on the condition.
Is there a way for me to check the status on the task records and then set a field on the parent record i.e. custom object 3.
Thanks,
NitikaTo whom are you speaking?
-
I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?
I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who! -
5 error while checking job status
Hi,
We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS':
5 error while checking job status.
The real scenario is we are using an abap screen with a button on it. when the user clicks on the button we call the FM 'BP_EVENT_RAISE' to trigger the process chain. once the chain is triggered we are having an endless loop to monitor the status of the chain with FM 'RSPC_API_CHAIN_GET_STATUS' untill the chain status turns green ie G.
Now while monitoring the status it randomly throws me the above error. it seems to work sometimes and other times it gives the popup with the said error.
Can anybody help why we get the error.
Regards,
ShashankHi Shanshank,
Try to Debug the FM.
Rgds,
Ravi -
CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes
Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack: at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
SebHi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My iTunes will not sync with the computer. When trying to sync, nothing happens and when checking the status I get the rainbow circle indicating the need for a force quit. What is going on? and how do I fix it
On a Mac: ~/Library/Application Support/MobileSync/Backup/
On Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
On Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync
make sure that u delete it than it shud be working again -
How to check lock status of field in current document?
Hi,
How to check the status of field in current document(master agreement), that is whether its locked or not.
I locked "Publish to Supplier" checkbox after MA is saved first time. Now, I want to check the status whether this field is locked or not in the same document.
IsLockOwner( ) is not returning the correct value. Its not giving the current document field lock status.
Is there any way to get current document field status?
Thanks,
SaloniHi,
If I understand correctly, your requirement is to get the value of this field "Publish to Supplier on". It can be achieved by writing the below:
isVendorVisible = doc.getExtensionField("VENDOR_VISIBLE").get();
Meaning, if the box is checked, it will return a value = true and if not then false.
Hope this helps,
Regards,
Vikram Shukla
Maybe you are looking for
-
To find error message in the standard program sapmv45a
Hi friends, I have a following senario. Iam getting the following error mesage. INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '00000678' DOES NOT EXIST. now my requirment is i should find from were this error message is being triggered. actualy my proble
-
My account has been disabled, i changed the password, signed out in setting and signed back in and still say disabled, can anyone tell me how to fix this?
-
Oracle Projects Testing Document
Hi All, Iam new to Oracle Projects. Can you please provide some flow documents. for exampple :Once project is created from a templae\ project then whats the next step. Thanks &Regards Chandra
-
I am getting divorce. How do I transfer iOS apps to a new apple id?
We shared an account. I wanted to open a new account, but don't want to lose the years of apps I have dowloaded.
-
Im having problems selecting actionscript for buttons. Whenever I click on the button it just says "actions" instead of "actions - button". It still does change for when im selecting for the frame though ("actions - frame"). Any help? Im using as2.0