Query to find universe modified date and modified by
Hi,
Is there a way we can query to find universe last modified by and modified date?.
I was not able to find a field to pull "modified by" info.
Thanks
Sreedhar,
I'm not exactly sure how you're going to get from Point "A" to Point "B", but here are the two points:
a) using QB you can perform a search as was specified in my last posting, which you point out only provides "owner"
b) if you have the Auditor portion running, then in the Audit_Detail table is the column "Detail_Type_ID" and each time a universe is accessed a code "2" is recorded and Detail_Text is loaded with the Universe name. If you join the Audit_Detail table to the Audit_Event table on Event_ID, then you'll have access to User_name and Start_Timestamp, which will show you who and when a Universe was accessed.
Thanks,
John
Similar Messages
-
How to autofill the Modified Date And Modified User?
hi All,
Below is the screenshot of my form , if we look at the last 4 columns we have Created Date,Created User Id which is popped up automatically if a new entry is being created. Now if we look at the last 2 ModifiedDate and ModifiedUserId those fileds will be
empty wile creating a new entry which is good for me. But lets say if i go back to any existing record and want to modify it then the modified date and modified userid must be popped up with that persons name and current date. I think i can use the logic i
have to get date and userid but i want some help with code to how to make the modified fields fill up.
Can someone please help me with this?
Thanks a lot for all your time and support.well I use it all the time, and have no problem in that initially both the 'started' and the 'modified' date fields have the same value..... because when one is editing a record whether initially putting in data or adding/changing later - they are both considered
to put the form in a dirty state.
then in future edits only the modified date field changes. the code in the OnDirty event is:
me.ModifiedDateFieldName=Now()
any other approach will be more difficult to achieve as essentially one must trigger it not universally at the OnDirty event but something more specific such as at every control -
Looking for a query to find first/last dates in overlapping dates...
Hi,
I'm looking for a query to find the first dates and last dates in a table conaining overlapping dates.
I have a subscription table which has for each Customer start and end date for different subscriptions.
I want to know the different ranges of date where there is subscriptions active.
so if the table has this:
CustID, Start date, end date
1, 2008-01-01, 2012-06-06
1 ,2009-01-01, 2011-01-01
1, 2011-01-01, 2013-02-02
1, 2013-01-01, 2013-08-08
1, 2014-01-01, 2014-04-04
I want to produce this result:
custid, range start, range end
1, 2008-01-01, 2013-08-08
1, 2014-01-01, 2014-04-04
the first row is the range identified from the 4 rows in my subscription table.
thanks :)I think I found it...
http://stackoverflow.com/questions/5213484/eliminate-and-reduce-overlapping-date-ranges
let me try this method
Hi,
m writing to follow up with you on this post. Thanks for you posting a reply to share your workground. Was the problem resolved after performing the above link? If you are satisfied with the above solution, I’d like to mark this issue as "Answered".
Please also feel free to unmark the issue, with any new findings or concerns you may have.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
How to find the Last modified date and time of a package
Hi,
We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
Lets consider the following example
Let A, B be two packages.
Package A calls the package B. So A is dependent on B.
When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
Now there a modification in package B so it is compiled. There is no modification in package A.
Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
Regards,
Vijayanand.CHere is an example:
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
SQL> CREATE OR REPLACE PROCEDURE A AS
2 BEGIN
3 NULL;
4 NULL;
5 END;
6 /
Procedure created.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
SQL> EXEC B
PL/SQL procedure successfully completed.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
Note that the date under the column 'created' only changes when you really create or replace the procedure.
Hence you can use the column 'created' of 'user_objects'. -
Get File by modified date and extension then copy to location
Hello,
Ill give a brief description of what I am trying to accomplish. We have a bunch of files that are sitting on a deduplication box (Exagrid), we want to try and copy certain files off of this dedup box, however, if we copy EVERYTHING this will fill up our
entire NAS Device. So, instead, I need to build a script that finds files by a modified date and extension type, then copy those to a specified folder.
Here is the code:
$logfile = "C:\CopyResults.log"
function LogWrite{
Param([string]$logstring)
Add-Content $logfile -Value $logstring
$date = get-date
$DateToCompare = (Get-Date).AddDays(-2)
$Files = Get-ChildItem -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".xlsx"}
foreach($File in $Files){
Write-Host "$File was copied to C:\test"
Copy-Item $File C:\test
logWrite "$File was copied to c:\test --- $date"
The file extension is of course just a test, as well as the destination of where these files are to be copied to. Ultimately I would like to build in the functionality that will check the date and delete the files after a certain amount of time has passed and
then copy new files. For now, though, I would be satisfied with just some insight on my own idea and know where I am going wrong or how to clean this up a little better. The overall issue I having is when I run this portion of the script I get this: Copy-Item
: Cannot find path 'C:\Users\<username>\<filename>.xlsx' because it does not exist.
At line:13 char:5
+ Copy-Item $File C:\test
+ ~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\Users\<usern...al filename>.xlsx:String) [Copy-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.CopyItemCommandI solved the issue. Here is the full script:
net use \\netpath\filename /user:<Username> <Password>
$logfile = "C:\CopyResults.log"
function LogWrite{
Param([string]$logstring)
Add-Content $logfile -Value $logstring
$date = get-date
$DateToCompare = (Get-Date).AddDays(-1)
$VBMs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vbm"}
$VBKs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vbk"}
$VIBs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vib"}
foreach($VBM in $VBMs){
Write-Host "$VBM was copied to C:\test"
Copy-Item $VBM.FullName \\netpath\filename
logWrite "$VBM was copied to c:\test --- $date"
foreach($VBK in $VBKs){
Write-Host "$VBK was copied to C:\test"
Copy-Item $VBK.FullName \\netpath\filename
logWrite "$VBK was copied to c:\test --- $date"
foreach($VIB in $VIBs){
Write-Host "$VIB was copied to C:\test"
Copy-Item $VIB.FullName \\netpath\filename
logWrite "$VIB was copied to c:\test --- $date"
"In this case you are handing a System.IO.FileSystemInfo.FileInfo object to the Copy-Item cmdlet. I think the cmdlet is probably defaulting to using the .Name property and that is not enough information for the copy to work. When you explicitly give the
.FullName property to the cmdlet, it now has the information that it needs."
I found this on Stack Overflow buried in the forums and it resolved all my issues. I have tried using that tool and it works very well, however, Powershell is what I am using for everything and I would like to keep it that way.
Thank you all for your time and help. -
Force Crawler in Maint Mode to Ignore Last Modified Data and Re-Index All
We are running SES 10.1.8.4 with the Siebel 7.8 data source patches 8533402 and 8624308 to index documents (PDF, XLS, DOC, PPT) via RMI and Decompression Tool in Siebel. This data source is virtually identical to the database data source.
The crawler will not "fail" if the actual indexing of the attachment file itself fails. For example, if RMI is down on the Siebel server and the crawler runs, SES will index the document metadata returned in the SQL but not the document. If the client then starts the RMI utility and re-runs the crawler, the document that was not indexed will not be re-indexed because the data source's last crawl time is used against the data sources last modified date attribute.
Here is the pseudo SQL for the initial crawler query in maintenance mode....
SELECT .... FROM MY_VIEW WHERE LASTMODIFIEDATE > TIME OF LAST DATA SOURCE CRAWL
We have found a way to update the data source's last crawl time (DS_LAST_CRAWL) in the EQ$_DATA_SOURCE table. For now, we simply are using SYSDATE - 1.
This will allow the missed document to be returned in the initial query.
However, it's the crawler's document-level last modified date check within the crawler that is preventing the re-index. Since the document's last modified date is the same as what SES has, SES skips over it thinking it has not changed. True, it has not changed but it was missed during the last re-crawl and we want it to be indexed again.
The client does NOT want to perform a full re-index because of the anticipated volume of attachments.
Is there any way to tell the crawler to ignore the document-level last modified date and re-index everything returned from the initial query? Perhaps one of the other columns in the EQ$_DATA_SOURCE (DS_STATUS, DS_CRAWLING_MODE) holds the key?
Thanks!I think it might be possible to set ENQUEUE_STATUS = 'Y' in the table EQ_TEST.EQ$URL. You may need to call eq_adm.use_instance(1) before doing so.
However I'm not sure of the full implications of doing this - DON'T DO IT ON A PRODUCTION SYSTEM without carefully testing on a development system. -
How to get last modified date and time of a file which is in apache server.
Hi ,
I need to get last modified date and time of a file in remote machine.
This file is in remote machine which has apache server installed.
I am trying to get this information by connecting to apache server from client by giving absolute URI of the file to file object.
URI is got from apache server URL by using toURI method.
when I use lastModified method , its throwing exception , because scheme of URI is not file.
I can't give scheme as file because ftp server is not installed on that server
Is there any other way to get this information .No, unless you can use an FTP client.
-
I am trying to organize thousands of old images in aperture. Aperture dates them all in 2008, when I started this project. When I change the date in aperture some of them hold the modified date and some revert to 2008. Any ideas?
I just tried a test library, re-imported fresh images from a hard drive, and the date changes still revert.
So neither your external drive nor your Aperture library are to blame.
What do you mean test in a different user acct? Would it be a good idea to uninstall and re-download aperture 3?
Appreciate all your help.
I meant the trouble shooting procedure described here: Isolating an issue by using another user account
To test, if some settings in your user account are faulty or preferences files corrupted, it helps to create a new user account from the "Users&Groups" System preferences. With a brand new user account you can see, if something in your current account is causing this.
Should you see, that Aperture is not even working from a new and clean account, I'd reinstall Aperture, and if need be the Operating system. Are you using any plug-ins? -
Reportable Last Modified Date and Time Field
Reportable Last Modified Date and Time Field
Hello,
We need a reportable RequestCenter 'last modified date/time' database field that is refreshed when the 'Comments and History' field is updated. Any ideas would be appreciated. Thanks!No, unless you can use an FTP client.
-
Display "modified by" and "modified date" on sharepoint wiki pages.
Hi there,
I want to display "modified by" and "modified date" on sharepoint wiki pages as a footer note.
I googled about it and I got the following code which I have inserted in my master page(Since I want to display on 2400 pages).
<%@ Register Tagprefix="SharePointWebControls" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<SharePointWebControls:DateTimeField FieldName="Modified" runat="server" ControlMode="Display"/>by
<SharePointWebControls:UserField FieldName="Modified By" runat="server" ControlMode="Display" />
It is working but last modifed user and date and time is visible only till page loads.
After page is loaded completely it dissappears.. Am I missing something??
Many thanks in advance..Sabiha,
Try these links,
http://blog.henryong.com/2010/06/08/how-to-create-custom-sharepoint-2010-page-layouts-using-sharepoint-designer-2010/
http://blogs.msdn.com/b/kaevans/archive/2011/07/07/modifying-the-page-layout-for-enterprise-wiki-pages-in-sharepoint-2010.aspx
https://social.technet.microsoft.com/Forums/en-US/64f6006a-73c5-4c8e-a552-896df8e22af1/show-wiki-page-library-columns-on-wiki-pages-sharepoint-2010
Hope it will be helpful
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
To find the latest date and time
HI all,
I have a Ztable which contains execution date and exe time.
1) I need to find the latest date and time How can we do this?
2) In my program,I need to insert some values to date,time and status field in Ztable. How can I insert it directly into the table?
for eg ZTAB-DATE = 010122006
ZTAB-TIME = 12.20.20
just INSERT ZTAB is enough or NOT????????????
POINTS WILL BE REWARDED
THANKS IN ADVANCE1) You can do a number of things, one you can get all of the relevant records and sort the internal table by date and time in decending order, then simply read the first record of the internal table.
2) It depends on the key of the table. Say for example, you have a table like so.
MANDT
KEYFIELD
DATE
TIME
If the key alreays exists, you can use the modify statement to update the record, if it dosn't exists, you need to use the INSERT statement to insert the records.
data: xtab type ztable.
xtab-keyfield = 'ABC'.
xtab-date = '20070207'. " or sy-datum
xtab-time = '221600'. " or sy-uzeit.
insert ztable from xtab.
Make sure to use internal fomat for DATE and TIME.
Regards,
Rich Heilman -
How do I find out the date and time a picture was taken on my Ipad?
How do I find out the date and time a picture was taken on my Ipad?
Photo Manager Pro
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/7a2b3650710f4bded81 ab75dda6a3ee5.jpg -
Where do I find my upgrade date and how do I find out when I bought the phone??
I need to know where I can find my upgrade date and is there any way to find out when I started my services with Verizon?someone help plezzzzz! thanx
Log on to your account, and click on the picture of your phone. It will show you when you can upgrade and when your contract ends. You can go back two years (or one year, if you opted for a one year contract) to figure your start date for that contract.
If this was not your first contract, and you've been with Verizon for several years, you may need to call customer service to find out your original start date. -
Finding the initial date and time of a modified instance of reccurnt evnt
The problem situation is as given below:
I have created an event recurrent using the outlook client. I them modified one
of the instance in it to occur in a data and time different from the existing
date and time.
Using the CAPI i wish to retrieve the initial date and time when the instance
occured. According to documentation i should have the initial date and time in
the Recurrence ID parameter. When i look at the icalendar i see that the
recurrenceid matches the start date of the current instance and not the initial
date and time. I am using the fetchEventByUID in the CAPI API set.
Is this behaviour of changing date and time of the recurrence-id the expected
one or is there any problem in the configuration on my machine.
Counting on some insight into the parameter where the initial date and time of the event are stored.
Best Regards
JoyceHi Joyce,
The sdk always sets the recurrence-id to be the starttime of the instance.
So the behavior you encountered is what one should expect with the sdk.
There were some changes in a 10G to correct this situation for a given service. (i.e. have the initial date and time in the Recurrence ID parameter, for instances of the recurring set).
This fix would not be available for the public sdk version, but given that this feature is important for your application, you could log a tar and it might become available in some 10G patch.
Regards,
Jean-Philippe Guguy -
Get last modified date and time of sharepoint site through Search
Hi All,
I am trying to get the last updated date and time of a sharepoint site using KeywordQuery.
For this I updated an existing list item, added a new item in a site and crawled the content. Then I used "ContentClass:STS_Site" as query in C# code to fetch the search results. I am able to get most of the properties I require for that
site. However "LastModifiedTime" does not return the correct value. It returns an older value.
How can I get the last updated date of a sharepoint site using search ?
Regards,
Vipul KelkarNo, unless you can use an FTP client.
Maybe you are looking for
-
Business rule trigger not calling the procedure in my code
Good morning every one, I have a small problem with two of my business rule triggers. I have these tables: pms_activity csh_cash csh_integrate_leh csh_integrate_led and my process goes like this: upon approval of a row in my pms_activity table I have
-
Error while using trigger and sequences
hi friends i am leraning oracle now. i have confronted a difficulty while working with triggers and sequence . iF anybody knows this problem ,please help me i created atable with the specifications given below CREATE TABLE TESTSEQ idno NUMERIC(10), d
-
How to add .js link in custom list form through sharepoint designer 2013
hi friends so far i was adding jquery code to script editor webpart in custom list form. but i need to know how to add .js link in custom list form through sharepoint designer 2013 please help me.
-
SharePoint 2013 Blog Site or Discussion LIst - Comment on a Comment
Hi, Quick question. Is anyone aware of a plug-in or feature or new blog add-in for SP 2013 that allows "comments on comments". From what I can tell in the blog site and discussion list, you can only comment on the original comment. You cannot com
-
EJB3: What is the easiest way to handle the rapid change DB structure?
Hi, I'm new in EJB, and it's the biggest leap to learn EJB3 without having strong fundamental in EJB 2.Currently, I'm facing the inefficient way to handle database rapid change on my Web Application. I choose JSP, Struts, and EJB3 with Oracle Databas