Query to read more than one aggregate at same time - is it possible?

Hi,
We have 2 aggregates set up. One contains data for 2007, the other for 2006. These are restricted by setting fixed values for 0CALYEAR.
When running a query for a single year the correct aggregate is picked up depending on which year is input.
When running the query for a range which spans both years then no aggreagate is picked up and the cube is then read.
Is there a system setting somewhere (RSADMIN table possibly?) which allows for multiple aggregates to be used when query is executed?
Your help would be greatly appreciated.
Thanks,
Steve

Hi Rodolphe,
Thanks for the answer.
Unfortunately we have too many queries against the cube in question to have to create and utilise restricted key figures per year.
I'm looking for a quick fix solution here if it exists - i.e. a parameter setting possibly.
I of course always use RSRT when testing the use of aggregates.
When I enter the range of years I get the following message:
Not possible because -
'____Characteristic/attribute 0CALYEAR does not have aggregation level */%'
This is displayed against both the aggregates for 2006 and 2007.
When using only one year then it correctly finds the aggregate for that year.
Thanks,
Steve

Similar Messages

  • Failed to upgrade more than one table at same time

    Hi
    In Deployment Manager, I failed to upgrade more than one table at same time.
    I tried to hightlight 4 tables and set the default action as Upgrade, and click File/Generate Deploy. It passed the code generation step then I click Deploy, they are all failed with no error message.
    But they are all successful when I upgrade them one by one. Any one has any idea about this?
    For the known reason, we have no choice to do the deployment with action of 'upgrade' through OMBPlus, instead, can only do that interactively through OWB Client. I can't imagine to ask our Production side DBA to upgrade 80 tables one by one. Or I have to use the generated scripts to do the upgrade, which will resulted in 'no deploy status updated' in OWB. Any help will be very appricated.
    The version I'm using is OWB 10g.
    Thanks,
    Daming

    Hi
    First of all, Patrick's solution doesn't work for me. I didn't do cloning and there is no problem when check the WB tables.
    Second, I think your solution is only good for the developing environment just to get tables upgrade via deployment manager. In most cases, when you do a new release on PROD environment you just exp/imp the MDL file from DEV to PROD and any developing is not recommended on PROD. But your approach is trying to manually the DB, and then EDIT the mapping to do the Reconcile and then deploy. Surely you can do that if you have full control on your PROD side. However, in my situation, I have no access to the PROD for the security reason and an DBA Operator of the Client is responsible to implement my Migration process on PROD by himself.

  • Photoshop CC on more than one Mac at same time

    I believe I can install Photoshop CC on two computers. But can I use both of those copies at the very same time? One for me and one for my wife. I have been able to do that with CS6

    No you can't. Technically, you're not supposed to do that with CS6 either, but they didn't have a way of forcing you not too...  With CC I'm pretty sure it will give you an error.
    Benjamin

  • Can NI-DAQmx Base read more than one channel at a time?

    I need to read and record two channels off of my Ni USB-6008 using NI-DAQmx Base. Is there a way to do this or is a lost cause?

    Of course it can read multiple channels. In your channel setup, do something like "Dev1/ai0:2". This will read channels 0 through 2.

  • Simultaneously read more than one input and generate output

    Is it possible To simultaneously read more than one input and generate outputs depending on these inputs? If this isn't possible what is the best way to go about making some sort of timed loop that will read an input, read the next input, decide whether or not to output and so on. Hope someone can help. Thanks.Message Edited by Esmith13 on 05-25-2005 01:36 PM

    Hi,
    You should look at the synchronized examples for analog input and output that can be found in the example finder under:
    Help>>Find Examples>>Hardware Input and Output>>DAQmx>>Synchronization>>Multi-Function
    These will get you started to being able to handle multiple tasks at the same time.
    I hope this helps. Have a Great Day!
    George

  • When I read a pdf document using Safari I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

    When I read a pdf document using Safari on my IPad  I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

    Hi snoreaustralia,
    It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
    Best,
    Sara

  • ITunes 8.1 Can't Seem to do More Than One Thing at a Time

    I upgraded to 8.1 and now, rather than a "faster" iTunes experience as was advertised on Apple's website, iTunes can't seem to do more than one thing at a time without locking up the application completely. For instance, when trying to download podcasts if I choose to hit more than one "Get" button at a time iTunes will freeze up until the first podcast has completely downloaded. During this time I cannot access any other screen in iTunes at all.
    This freezing of iTunes also occurred while I was trying to sync my iPhone 3G. I received the Calendar sync error that a few other people have mentioned on the forum and wanted to turn off Calendar sync (since I don't use it and don't understand why iTunes turned it on by default, apparently, after the upgrade) but I had to wait for my iPhone 3G to completely sync before I could gain access to any of the tabs in the iPhone sync window.
    So, basically it seems like the new version of iTunes (8.1) really doesn't like to be bothered while it is trying to copy data from one place to another.
    Any ideas?

    I'm using Vista Ultimate 64-bit and iTunes 8.1 installed OK, but required a restart of the entire OS after upgrading. It takes forever to launch, clicking on certain items (like applications) causes itunes to freeze for about 15-30 seconds before it continues (this is actually something that's been there since the introduction of the app store), I've had to switch my library view to LIST and avoid any sort of album art. Using album art to view my library causes iTunes to be extremely, obnoxiously unresponsive.
    The best part - plugging in my iPhone to sync it... iTunes simply sits there dumbly - doesn't even recognize that I've plugged my iPhone in. So now I can't even sync. QUALITY product, quality. So the app I'm FORCED to use to manage my phone doesn't even work after upgrading. Outstanding.
    I'm terrified of uninstalling and reinstalling... the last time I did that with iTunes it jacked my library up... it "lost" all of my music... basically it disassociated all of the music (even the stuff purchased through the itunes store) with the index file so I had to re-import EVERY song and delete the duplicate entry.
    I searched a ton of forums looking for any clues as to how I could improve performance... All I run into is apple fan boys flaming any and all forums to the point of PC *****, no Apple *****, and so forth. Extremely unhelpful.
    The fact is this - if I wasn't forced to use iTunes to manage my non-jailbroken iPhone 3G, then I'd dump it completely. It is a horrible app. Why punish the customers that haven't gone the route of "jail breaking" their iPhones?
    One individual on one of the forums suggested that blue screens, and all the other random errors, including slow performance were due to a lack of RAM. I have 4GB of RAM on my machine I can run a virtual Fedora core 9 machine and a virtual WinXP machine on my Vista x64 box and still not have any performance issues with those two virtuals in the background sucking up system resources, yet with nothing open and less than 50% of my 4GB of RAM in use iTunes performance is abysmal. I have not run into any other application on my Vista machine that performs as badly as iTunes.
    And Apple is touting a "64-bit" version of iTunes - it isn't. The applications the 64-bit installer installs are all 32-bit.
    So, I'm searching as the two of you are for an answer to horrible performance of iTunes.
    Even exiting out of iTunes takes a day and a half... "saving itunes library".... And my "library" isn't that big.

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • App that can send more than one attachment at a time....

    Does anyone know of a app that I can send more than one attachment at a time like resumes + cover letters. Not having any luck with gmail or pages for the Ipad.
    Please help

    The MPEG Streamclip app can batch process videos. It can even convert up to  4 videos at the same time.
    http://www.squared5.com/
    It's free...
    Just drop as many videos as you like into the batch window.

  • How can I highlight more than one pic at a time?

    First of all, THANKS for anyone that may answer since APPLE obviously has no desire to get off their ***** and help their customers.
    About ten days ago I was prompted to install apples new operating system. So of course I clicked OK, idiot that I am!
    Now I'm stuck with this new piece of **** operating system that I wish I could uninstall.
    ANYWAY,
    I upload a lot of pix for stuff I sell on EBay, sometimes 3-400 at a time. When I delete photos it's usually 1,000 at a time, and I assure you I'm not exaggerating. Up until now I was able to touch the END pic and swipe the whole horizontal row with two fingertips and the whole row of 7 would get checked. With the new ios7 I am unable to do it anymore (yet ANOTHER reason I don't want this 'improved' OS).
    Does ANYONE know of a way to highlight more than one pic at a time?? Remember the old windows system where you could click one pic, then hit SHIFT and click a lower one and it would highlight them all, in between, for a quick delete?
    There MUST be a way to delete, or rather highlight (or CHECK) more than one pic at a time? Anyone?
    THANKS, Rich

    Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
    There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

  • How do i get my ipod touch to download more than one app at a time, can i make it toware i dont have to wait for one app to download before it starts downloading another,

    my ipod will only download one app at a time and runs extremely slow. i was wondering if there is some way that i can make it download more than one app at a time and how can i make the app start downloading again after i have left my wi-fi zone and then went back in. im really confused.

    Download everything on your computer in iTunes, then sync your iPod to iTunes.
    You should be syncing (backing up) to iTunes and your photo app regurally, anyway.

  • Can not color label more than one file at a time

    Hi,
    I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
    Wether i select two, twenty or twohundred only one file gets color labeled.
    It doesn't seem to matter if i assign a color label through the File menu or right click > label.
    Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
    Does anyone else have this issue and/or a fix for it?
    Thanks,
    Jay

    Aaaaanyone ?

  • Can we open more than one  "folder" at a time in Bridge?

    When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
    Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
    Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
    Please alleviate my ignorance.

    Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
    Not so quick way: Select menu File => New Window. Open the second folder there.
    If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
    1) View the parent folder in bridge.
    2) Open the Filter palette.
    3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

  • Can't print more than one job at a time.

    I am trying to print to either a HP DesignJet 1055cm plotter or a HP LaserJet 5000N. I can't send more than one file at a time. If i don't wait until the current job starts printing, the next one won't print. For example if I sent five files one right after the other, I might get 1, 4 and 5. I don't think it's a printer problem because it happens on two different printers, and it doesn't happen when I print from my PC. Any idea what could cause this?

    My work around is to put all the jobs "on hold" in the print settings or just "stop jobs" on the printer window.
    Then I click on each print job in the que and let them print one at a time. This way I can at least quit the program and move onto the next thing.

  • Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

    Hello all,
    Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
    At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
    (ME61/ME62/ME63)
    Detailed replies with various possibilities would be highly appreciated.
    Thanks & Regards,
    Joy Ghosh

    The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
    But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
    There you define a job that runs RM06LBAT report.
    You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

Maybe you are looking for