Query Transported Successfully : But transported query is not available in PRD system

Hi Gurus,
I have transported one query yesterday. And transport got successful with out any errors.
Now i am checking the same query in PRD system, but i am not able to find the query.
Checked in RSRT and Query Designer in PRD System.
Table RSZCOMPDIR is showing only M version of the query in PRD.
Please help to fix this issue.
Regards,
PRK

Hi,
have you cheeked the STMS there showing return code - 0,4,8,15 means success or warning or red?
have you transported successfully form dev to qav?
are you seeing same query in qas?
if not available same query on PRD please re import the one more time.
check the RSRT giving the technical name of query and check the multi provider.
Thanks,
Phani.

Similar Messages

  • FF ID is not available in GRC system.

    Hi All,
    i have configured FF in GRC system and have dine following activities
    1. maintain connection setting in SPRO.
    2. created FF id in ECC system and assigned FF standard role.
    3. run all necessary synchronization job.
    4. assign owner.
    but FF id is not available in GRC system.
    can you you please help me.?

    Hi Alessandro,
    Thanks for your replay. please find my configuration in details.
    1. Parmid 4000=1,
                   4010=SAP_GRAC_SPM_FFID
    2. Maintain maintain connection SUPMG in SPRO > GRC > Common Connection Setting > Integration Framework > Maintain Connection Settings.
    3. Create FFid in ECC DEV system.
    4. assign role SAP_GRAC_SPM_FFID to FFid.
    5. create FF id owner and FF id controller.
    6.Run Syn.
    but when want to assign controller to the FF ID then found FF is not available.

  • I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

    I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Root device mounted successfully, but /sbin/init does not exist ???

    I'm having the issue where when I boot after doing a fresh install, it gives me:
    ERROR: Root device mounted successfully, but /sbin/init does not exist
    Bailing out, you are on your own. Good luck
    sh: can't access tty; job control turned off
    [rootfs /]#
    My fstab:
    # /etc/fstab
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda1 LABEL=homerroot
    UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
    # /dev/sda2 LABEL=homerboot
    UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
    # /dev/sda3 LABEL=homeretc
    UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
    # /dev/sda4 LABEL=homervar
    UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
    # /dev/sda5 LABEL=homerusr
    UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
    # /dev/sda6 LABEL=home
    UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
    # /dev/sda7 LABEL=public
    UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
    This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
    I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
    this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
    So I tried:
    https://bbs.archlinux.org/viewtopic.php … 3#p1283343
    I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
    None of the other steps have any effect....
    I also tried:
    https://bbs.archlinux.org/viewtopic.php?id=172943
    My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
    And:
    https://bbs.archlinux.org/viewtopic.php?id=166423
    I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
    Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
    Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
    Thanks in advance for your help guys!

    WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
    I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
    WonderWoofy wrote:A separate /etc is not supported whatsoever.  There needs to be initial access to a few things there.  I'm sure it could be made to work with some initramfs hackery.  But it is neither supported or wise to do so IMO.
    I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works.

  • In bridge i select a jpg image with cntrl r to open in camera raw but get "camera raw not avail"

    In bridge i select a jpg image with cntrl r to open in camera raw but get "camera raw not available"  camera raw editing requires that a qualifying product has been launched at least once to enable this feature.  I can open nef. in camera raw with no problem.

    Hm, what I suggested might actually be a possibility then...
    Close whatever version you have open first...
    I think Adobe installs shortcuts for both 32 and 64 bit Photoshop in the start menu.
    If you can't find the 32 bit Start menu entry, look for the 32 executable here (changing the CS version number to whatever yours is):
    C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
    -Noel

  • I downloaded Mountain Lion in my  i have macbook pro retina display last month.  but I don't get airplay the option on my macbook.  I went to display preferences, but the airplay is not available.  What is the next step?

    I downloaded Mountain Lion in my  i have macbook pro retina display last month.  but I don't get airplay the option on my macbook.  I went to display preferences, but the airplay is not available.  What is the next step?

    You also need:
    Apple TV (2nd or 3rd generation) with software update v5.0 or later.

  • Broken 4s screen and no display. Siri worked to make calls but now says "Siri not available connect to internet" still waiting on new phone and need to make calls. How can I get Siri to work again?

    I broke my iPhone 4s screen and display. Siri worked to make calls but now says "Siri not available, connect to the internet". How do I make Siri work again till I get my new phone?

    If not connected to the Internet, either through WiFi or 3G, you can't.

  • Some of the messages in a gmail mailbox are missing.  I tried to select rebuild but this option is not available (i.e. it is greyed out).  Any suggestions?  The mail is all there when I go into the Google Mailbox.

    Some of the messages in a gmail mailbox are missing.  I tried to select rebuild but this option is not available (i.e. it is greyed out).  Any suggestions?  The mail is all there when I go into the Google Mailbox.

    I've ran the connection doctor and it's showing that the connection to the internet is fine
    What about the connections to the mail servers?

  • I purchased iphone 4 from UAE and activated and using in India, but FaceTime application is not available. how to get FaceTime ?

    I purchased iphone 4 in UAE and activated and using in India. But Facetime application is not available. How do i get it?

    You don't.  Facetime is not available on UAE iPhones, regardless of where activated or used.

  • I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

    I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

    InDesign CS4 can open .indd, .indt  and .inx files from earlier versions, but not from later. It should, however, be able to open .idml files saved or exported from newer versions, with the understanding that unsupported features will be lost, text will probably reflow due to differences in texts engines between versions, and that the greater the gap between versions the more likely there are to be noticeable differences from the original. You will need to be sure CS4 is at version 7.0.6 to read the .idml.

  • Hello, I have a license to acrobat standar, but acrobat standar is not available only acrobat pro and my license code is incorrect for this version

    Hello somebody can help me.
    Hello, I have a license to acrobat standar, but acrobat standar is not available only acrobat pro and my license code is incorrect for this version.

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

    how can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

    This is determined by your carrier. SMS/MMS is a poor man's email and by that I mean SMS/MMS has major restrictions and limitations compared to email but is a cash cow for cell phone carriers.
    Upload the video to YouTube when connected via wifi and send the YouTube link via text.

  • I want to cancel my membership but the chat is not available and can not call

    I want to cancel my membership but the chat is not available and can not call

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Authorization creation by ODS((0TCA_DS01) not possible on PRD system

    Hi friends,
    I am setting the authorization values by using ODS(0TCA_DS01)(uploading file data to the ODS and then creating it via RSSM). But it is not possible on PRD system on which system is set as "No change to repository cross-client customizing objects".
    Are there good solution to set the authorization values by ODS method on PRD system?
    Kind regards,
    Masaaki

    Go to /nsu53 and see if u have no authorization in PRO then go to DEV assign authorization & then transport the same to Production.

  • Software used to decode the media not available on this system

    "The software that's used to decode the media is not available on this system…"  I get this error message when I try to import an H.264 video file (about 3.7 GB in size) into Encore CS6 to make a Blu-Ray.  I've read the message threads about this problem but they don't seem to apply to my case.  I'm using a recent Mac Pro Tower running OS 10.8.5.  I made the H.264 file using Compressor 4 and a Matrox MX02 box using the Matrox encode setting for high-quality Blu-Ray.  I've used this workflow a number of times before and never had any trouble importing the resulting files into Encore.  I've tried starting a new Encore project and also re-doing the encoding of the H.264 file, without success.  I've also experimented with importing other, recently made H.264 files into a new Encore project and these, as before, present no problems.  I'm baffled!

    I solved the problem and thought it might be helpful if I described the solution.  The error message gave no indication of the nature of the problem, which was caused by a single clip in the Avid Media Composer timeline.  This clip was an import from Photoshop, resized in Avid Media Composer.  In height, the pixel dimensions of the Photoshop file were a bit more than 1080.  I have no idea how this dimension survived rendering in Media Composer or H.264 encoding in Compressor using the Matrox MX02 box.  But it evidently did.  When I resized the image in Photoshop before importing it into Media Composer, then re-encoded the video as H.264, it imported normally as an asset into Encore.

Maybe you are looking for

  • Select multiple values from the parameters in BI Publisher report  Error

    In the database, I wrote a function to retrieve data to report: FUNCTION FN_TL002(cBDSID nvarchar2) RETURN SYS_REFCURSOR as TYPE t_cursor is REF CURSOR; v_cursor t_cursor; begin OPEN v_cursor FOR select Brach, txmonth, txdate, total from tl001 where

  • Error message while executing a SWF File

    Hi All, Iam trying to execute a SWF file which has its actionscript written in AS3. When i execute this, I am getting an error message which is as follows Verify Error 1030# Stack Depth unbalanced 1 != 0. Can anyone tell me what could be the root cau

  • Setting the source-interface in a tcl script for email.

    So once again I am trying to figure this out and failing miserably. The only thin I can think of at the moment is that I need to tell it to source from a specific vrf interface. I've tried looking through possible enviornment variables. Hoping I coul

  • How to send out email in HTML format instead of Plain text?

    Can anyone help? Or any website with that information? I am trying to send out email using javamail. But i want it to be in HTML format so that i can set font size,coulor and so on. Thanks in advance if you have any clue or solution.

  • How to incorporate a Language that is not supported in Oracle Portal

    Hi, I want to know the preferred way to add support for a new language in Oracle Portal. If a language is not supported in Oracle Portal, how I can add the content for that language in the Portal? Please advise. Best Wishes.