Query View name not saved in "Analysis Grid Properties" under Data Provider

Hi BW World;)
We are on BI 7.0
I have created a BI workbook which contains a query view.
However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
Is this the normal scenario?
Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
Is this a bug?
Best
Stevo.... Points of course... Thanks in advance.;)
Edited by: bw4eva999 on Sep 10, 2009 4:40 PM spelling

Hi,
You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
So this is not a bug and this how its been designed.
If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
Though it looks like wierd,it is not a bug.
Rgds,
Murali

Similar Messages

Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201).

"Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201)"
This error keeps cropping up now and again on most of our domain controllers (OS-2008 AND 2008R2)...Usually a restart fixes the issue however the issue repeats and security logs don't generate.
Any advice on how to fix this issue permanently would be greatly appreciated.

Please see this: https://social.technet.microsoft.com/Forums/windows/en-US/95987ca3-a1b2-4da6-95b7-d825d06cdac7/error-code-4201-the-instance-name-passed-was-not-recognized-as-valid-by-a-wmi-data-provider?forum=w7itprosecurity
You can also try rebuilding the WMI repository: http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Displaying query view name in web template.

Hi all,
In the standard web template (0ANALYSIS_PATTERN) there is a text box which displays the query title. I need to change this so it displays the name of the query view instead of the query. Does anyone know how to do this?
Many thanks,
Nick.

Hi Nick,
In the template you need not to do any special setting for Query View Name display.
When You use a query view in template that becomes as a data provider, so for every data provider whether that's a query or query view it works same.
You can select to display query technical name or description.
Hope i understood your requirement correctly. If not than please correct me.
Thanks
Dipika Tyagi

Customer Exit - Fill variable depending on query view name

Hi
We're running BW 7.0
We have a query which is used for broadcasting and as well for user input. That's why we have a variable which is default filled by a customer exit. This variable is the week and is default filled: fist week of year up to actual week.
But now we have for the same query different selection requirenments.
The same query should be send by email with
- first week of year up to actual week
- previous week
Because of dynamic variables the calweek needs to be filled by customer exit and worked until now fine - until a second requirenment was coming (separat broadcast only with previous week).
I don't like the idea to copy the query because of maintenance work.
I'd like to have several views - and depending on the view name etc. I would fill the customer variable. But I don't get the query view name into customer exit - right?
Do you have any other ideas?
How do you handle such requirenments?
Thx
Roger

Hi Helder,
I understand your requirement but I don't understand the solution you are using. I think it's a bit tricky.
What I would do is:
Create three variables:
- VAR1: Single value, mandatory, ready for input, customer exit. Used to store "User input date"
- VAR2: Select option, customer exit, not ready for input. Used to store Valid From restriction.
- VAR3: Select option, customer exit, not ready for input. Used to store Valid to restriction.
Then, use this code:
WHEN 'VAR2'.
IF I_STEP = 2.
READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
with key VNAM = 'VAR1'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'LE'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
WHEN 'VAR3'.
IF I_STEP = 2.
READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
with key VNAM = 'VAR1'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'GE'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
I think this should work, and you'll have three independent variables used for one purpose each.
Hope this helps.
Regards,
Diego

Windows 8.1 folder view settings not saved

Hello, Everyone
Windows 8.1 Each folder view settings not saved what i can do.I
want different view settings in each folder likes folder 1 i want large thumbnails & folder 2 small
What i can do to resolve the issue thanks in advanced.
I don't have any backup no system restore I also try to rest or restore default view settings but none are working for me.

Hi,
This is default behavior. It is not possible to set Windows Explorer to remember individual folder view settings for folders included in libraries. All libraries and its included folders share the same view.
Karen Hu
TechNet Community Support

Outlook view settings not saved

I have one user who looses all View settings when restarting Outlook. Occasionally they will save, but it is very rare. Setting the Reading Pane to Off is one good example of a setting that does not save.
The creation of new Views is also not saved. After restarting Outlook, the new View does not appear in Manage All Views.
I have tried creating a new Outlook profile and I'm told that Office 2013 C2R has been re-installed since this problem started.
Outlook 2013 Click-To-Run via an Office 365 E3 subscription. Exchange Online mailbox. Windows 7 Pro 32-bit.
Any help would be appreciated.

Hi,
Basically, Outlook view settings are stored in the default data file. If the data file is corrupt or recreated every time Outlook restarts, the view settings may be not saved.
Does the user use Outlook with Cached Exchange mode enabled? If so, please go to
C:\Users\%username%\Documents\Outlook Files and check if you have multiple .ost files in the folder.
In addition, you may try to switch to turn off Cached Exchange mode and then test this issue again.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Query views are not using OLAP cache

Hi,
I am trying to pre-fill the OLAP cache with data from a query so as to improve the performance of query views.
I have read several documents on the topic, such as How to Performance Tuning with the OLAP Cache (http://www.sapadvisors.com/resources/Howto...PerformanceTuningwiththeOLAPCache$28pdf$29.pdf)
As far as I can see, I have followed the instructions and guidelines in detail on how to set up the cache and pre-fill it with data. However, when I run the query views they never use the cache. For example, point 3.4 in the abovementioned document does not correspond with my results.
I would like some input on what I am doing wrong:
1. In RSRT I have Cache mode = 1 for the specific query.
2. The query has no variables, but the following restrictions (in filter): 0CALMONTH = 09.2007, 10.2007, 11.2008 and 12.2007.
3. I have one query view with the restriction 0CALMONTH = 10.2007, 11.2008 and 12.2007.
4. I have a second query view, which builds on the same query as the first query view. This second query view has the restriction 0CALMONTH = 11.2008 and 12.2007.
5. There are no variables in the query.
6. I run the query.
7. I run the first query view, and the second query view immediately after.
8. I check ST03 and RSRT and see that cache has not been used for either of the query views.
Looking at point 3.4 in the abovementioned document, I argue that the three criteria have been fulfilled:
1. Same query ID
2. The first query view is a superset of the second query view
3. 0CALMONTH is a part of the drill-down of the first query view.
Can someone tell me what is wrong with my set-up?
Kind regards,
Thor

You need to use following process of process chain: "Attribute change run (ATTRIBCHAN)". This process needs to be incorporated into your process chains which loads data into provider on top of which your query is based.
See following links on topic how to build it:
https://help.sap.com/saphelp_nw73/helpdata/en/4a/5da82c7df51cece10000000a42189b/frameset.htm
https://help.sap.com/saphelp_nw70ehp1/helpdata/en/9a/33853bbc188f2be10000000a114084/content.htm
cheers
m./

Query view is not displaying data correctly

Hi,
We have built a query and 4 query views on the query and it is published in the Portal.
In the query ,we have a restriction on cost elements.
And on the query view we dont have any restrictions on costelements.
But when we execute the query view,the query view is showing some restrictions on costelements.
We have created a new query view on the same query and when we execute the query view in portal, it is showing soem restricitions on query view on costelements.Because of this User is not able to see all the data.
Any one help us in understanding and fixing this problem.
Thanks in advance!!

Hi,
These are the my assumptions please can you check the same.
1) cost element is always compounding with the controlling area can you check either any restrictions are there on controlling area.
2) As you said in mother report( query) you are having the cost element restrictions , from that query only you are creating query view so automatically which ever the restrictions are there globally on that report it will be worked on view also.
so it is better to avoid that first and create teh view with out any restrictins then you can create one more view with the cost element restrictions
craet main query with out any restrictions then creae te view with restrictions, you are doing vice versa.
Thanks & Regarsd,
sathish

Different query view format not shown

Dear Gurus,
I am kinda new to WAD; Here I made 2 different query views(Different format) and used 'Query View Selection' in WAD. But somehow, when i choose different query views from the drop down list, the format of the result all seem to be the same(as the first chosen one). Is there any setting that i might have missed out?
And here is another question, can i possibly fill 'Query view selection' from different Query? and how to do that ?
It's quite urgent for me, please help out ASAP.
Thanks a lot~~ Points will be rewarded~~
Charlie Lin

In the property of the drop down box, you should have property called affected area, in that select both the query views you want to see and you should see different result as you change the drop down box.
And also make sure your data provider for both of the views are different, need to create a new for the next one.
thanks.
Wond

View settings not saving?

In tiger, i was able to close off the preview option and have it not display thumbnails in icons (e.g., any setting in the "view options" pane. now, they never save at all. anyone else having this issue? thanks.
ryan

I want to "ditto" on this thread as well hoping our complaints collectively would be large enough for Apple to fix our view settings are not always saving permanently.
Even when I check "Always open in xxxx view" within the View Options pane.
It would appear my settings would take, but after awhile, or even after a restart, the folder would lose my view settings.
And 10.5.1 did not fix this bug.
I have been a die-hard Mac user since the Mac SE and Mac II. I've been reading with amusement as others berate the latest OS X update for not working properly. Then, I had always thought that they were over-reacting.
But now, with all of the problems I have gone through with Leopard on my Dual G5, I, too, have lost it. My anger and pain have pushed me to madness; from the little annoying problems like this seemingly innocuous bug, to the unacceptable restarts and complete OS 10.5 fresh install I had to do because of system instability and/or application instability, I've never encountered so much personal frustration in an OS X upgrade in the past.
Even initially, I was bemused by public rants on the failures of 10.5 after I had upgraded. But now after having to reinstall 10.5 from scratch, I'm at the point of crying foul myself to anyone who would listen: STAY AWAY FROM 10.5.

Machine name not saved after image

Can't seem to see the workstations I imaged in zenworks. I have reimaged
and renamed some machines and can only see the old name in zenworks and
not the new name.
Example
If the workstation name was NOVELL-1
and I reimaged it and renamed it NOVELL-ONE
I can only see the NOVELL-1 in zenworks and can't do a thing to it
because it does not exist. I can't see the NOVELL-ONE workstation in
zenworks at all. And if I try to reimage it it never saves the name and
ask's me to name it again. I'm lost, I thought it saved the name in the
same place it saves the things like "last image path".....

Roakley,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

VIEW settings not saved in FINDER

Lately my FINDER for viewing files does not save the settings I check in the VIEW menu. It states in the MAC HELP: "If you choose icon or list view, the Finder saves your view settings. The next time you open the window you will see the same view settings you chose previously." After I turn off the computer, the next time I restart it the settings are lost. I have updated the "Permissions" in the Disk Utility but it did not help. Do you have any other suggestions?

I opened your "User Tip", Scott, and on the second page it gives information about the VIEW settings preferences. The NOTE in red letters seemed to have been my problem. It states "do not at any time use the"apply to all windows" option in VIEW OPTIONS and make sure this button is disabled. Somehow mine was enabled. I disabled it, logged out, logged in again, restarted my machine, the VIEW SETTINGS held. I then shut the computer down and when I restarted it today, all VIEW SETTINGS held. Thanks for the tip.
Lollie

Save Query As - Variant not saved

We are in 3.0B and moving to 3.5
In 3.0B, when we save a query as a new one, the Variant does not get copied over. Is there a way this can be handled?
Does 3.5 have this covered?
Thanks,
Bharath

Hi Bharath,
I think there is no way other than a custom program for this or do it manually.
Please let us know if any one knows the standard functionality.
Thanks and Regards,
Suneel Patil

IPod View Options Not Saved in iTunes

I just upgraded to 7.0.1 to see if it would fix this problem, but no dice. The view options for my 5G 80GB reset back to the factory settings each time I disconnect my iPod, or even if I restart iTunes and leave the iPod connected.
I'd like to have the browser up and have some of the other options changed, like showing track numbers and time. This is a setting that always stays the same with my previous iPod (4G 20GB). Anyone sles have this problem?

Sorry - I just posted a similar question, I didn't quite read your question carefully enough. I am having a similar problem - I keep having to restore my Ipod. If someone tells me how to check when I last updated my software, I could tell you if I upgraded to 7.01. Maybe that is the issue -
If anyone from APPLE is reading this - can you tell us if there are issues with the 7.01 upgrade in that the ITUNES software is not recognizing our IPODS anymore.
thanks,

Custom viewer icon not saved

In the app builder we are finding that when we use custom icons for the tabbar at the bottom it normally saves the location of your previously used icon when you edit. However, for the viewer icon, it wont save it and everytime we edit we have to specify the location of the custom icons again.

I have the same problem!

Query View name not saved in "Analysis Grid Properties" under Data Provider

Similar Messages

Maybe you are looking for