Query views not showing changes of a query

Hello All,
I have a base query with about 20 query views from it. If I change something in the base query i.e. change number of decimal places on a key figure. I would expect this change to be shown in the query views. This is not happening. Should this be the correct behavior? If i create a query view again based on the the ammended query then the results are shown, but i dont want to create 20+ query views again.
Any suggestions?
Thanks,
Nick.

Yep that's the way it works .... sorry for you ...
Query views save the format and just refresh the data in the cells.
Which is interesting sometimes because you don't want everyone to have the same format on their views.
If you saved variants than you can recreate your 20 views quite quickly,
Olivier

Similar Messages

Web Template with Query Views not showing Variable Screen

Hi, I have a Web Template using 3 Query Views based on a single query. The Query has 2 mandatory variables (CALMONTH and VERSION). When I execute the Web Template it does not prompt with the Variable Screen, and presents the report with the Variables that were in place when the view was saved/created. I'd like the Variables to appear.
1. Is this the correct behavior?
2. Is there any documentation that might describe this behavior.
3. Should I just copy the query and create 3 queries instead?
Note: I did a search in SDN and found lots of similar threads, but nothing exact. Also, I know about forcing the variable screen, but I thought I shouldn't have to do this.
Thanks!

k forget the view, when you run the main query... do you get a pop up for variable screen,. yes or no?
if you dont then try to run another query and see if you get the variable screen as well. if you dont then its a bug. if you do then something is wrong in your query and its having an issue, but if you do get the screen on your query then it is a setting in your web template not in your query.
you can also try to run the query in RSRT backend ...

Plan view not showing changes to Master.

Design changes made to Master not being reflecting in Plan View. However each individual pags does reflect change when in design mode. Can I force an update to Plan View?

Hello,
Changes made to the master page should show up in the plan mode on all the pages that the master has been applied to. Please check if the master has been applied to all the pages correctly by checking the name of the master here: http://jingsite.businesscatalyst.com/jing/2013-03-22_0250.png
If the master is applied correctly, then please show us the difference by showing screenshots of how the master page looks and how the plan mode looks. You can attach the screenshots as images here as well, or can upload it and then provide links to them.
Cheers
Parikshit.

Query View not displaying data according to Query

Hi,
I have a query with current cal week vaiable set for 0CALWEEK. A Query View is created on that but everytime we have go and maually refresh the query view and save it to show the current week. Is there any setting in WAD, Queryview or the query to pick the data automatically from Query directly?
Thanks

Hi,
Restrict the 0CALWEEK in the query with the variable 0CWEEK which is the current week. Then, create the view and the web template will automatically takes the current week.
Edited by: P R on Feb 15, 2011 5:06 PM

Key Figures not showing up in the Query disigner

I added a key figure to a characteristic as an
attribute, but it is not showing up in the Query designer
any idea why
Raj

Hi RajShekhar,
This KF that you have added as an attribute to a char will not be available in the Key Figure section. Open the dimensions and find the char for which you created this attribute. Open up the attributes under it and you should find the KF. If you need to use this KF value in a calculation, then you will need to create a formula variable to pull in its value.
Hope this helps...

Why do views not show up in HTML DB?

All,
When I create a new view with SQL/Plus why doesn't it show up in HTML DB? Views that were created previously (before install of HTML DB) are visable.
Thanks

Just FYI, I had a problem with views not showing up when using the wizards. Reported the problem and was told it was a bug. Workaround was to create my pages from scratch and explicitly reference the tables instead of the views.
Although HTML DB could handle some views, views that were based upon other views or where there were several layers of views seem to give HTML DB a problem.

TS1702 Why is the icon for street view not showing up on the left side of the location on the maps app?

Why is the icon for street view not showing up on the left side of the location on the maps app?

Because the included Maps app no longer gets the maps data from Google, so no more street view.
You can get a free Google Maps app from the iTunes App Store.

HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
<Email Edited by Host>

Information Broadcasting - change to query does not show

Hi,
I'm on BW 3.5 and have created a scheduled Information Broadcasting setting for a query, that is emailed. This has been working fine for some weeks.
I have now changed the query, removing two key figures and replacing them with two formulas.
The output from Information Broadcasting does not show the new key figures, nor does it show the old key figures (!). I have maintained the IB setting, edited text in the message and saved it. The text has changed, but not the query content.
So, how does one make Information Broadcasting recognise query changes? Obviously, I could delete the setting and set up a new one, but this is a poor solution - there must be a better way. Or not?
Thanks,
David

Hi Dave
Can you please post the result for this issue or mail me the solution at [email protected]
i am facing the same issue and need to solve this problem asap.........
thanks
prat

Changing a Query do not show Results in the PLD Format

Hello Experts!!
I have a PLD report, and I changed the query a BIt
let say the oiginal query is select 'HELLO' from OINV where DocEntry between 100 and 110
but then I Changed to +select 'HELLO' + World' from OINV where DocEntry between 100 and 110+
But The PLD do not reload Data, there is any way to change this?

Gordon Thanks for your answer,
but maybe i didnt explain myself clear.
let me explain a bit:
When you create a Query in the Query Manager, you can create a Print Layout.
then you can modify in
Tools>Queries>Query Print Layout
but that Layout is related to the Query you just did.
but when you change the query the Layout wont change ...
I think SAP do not work well with this, I think that Query Manager shoud have and Update button and then go and upate the query in PLD ... well thats all

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Please show this query, data not showing why?

I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.

Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon

Query Viewer not working

New install of CFB 2 on Win 7 32bit with CF901.
When right clicking on a database table in RDS Dataview I get an error , I get the error "/MyProject/.rdsTempFiles/RDS Query Viewer does not exist". The same is happening when trying to open the RDS Query Viewer.
This works correctly in CFB 1.
Any suggestions what is going on? Is it a permissions issue or something similar? The .rdsTempFiles directory is created in the /MyProject folder and shows up in the Navigator.
Thanks
Doug

Hi Kiran,
I cannot login to the Forums (the login is apparently down) so will answer what I have found.
Running CFB2 on Win 7 32bit. CFB 1 is also installed.
Tried the following: ( CFB 2 ALWAYS started with -clean option )
1. started with no projects at all in Nav. View.
     Added New Project called "test List" that was pointed to "C:\inetpub\wwwroot\testlist" folder - Query Viewer did not work
2. deleted project from Nav View, deleted .project, .settings., settings.xml, .rdsTempFiles from testlist folder.
     Added New Project called "test List2" that points to same testlist folder. Query Viewer did not work.
     Renamed "test List2" to "testlist". Query Viewer did not work.
3. Deleted project from Nav View, deleted .project, .settings, settings.xml, .rdsTempFIles from testlist folder.
     Restartd CFB2. Added New project called "testlist" that points to same testlist folder. QUERY Viewer worked successfully.)))
     Renamed testlist project to "Test List". Query Viewer worked.
Restarted CFB2 and repeated 1 and 2. Even re-started CFB2 after adding a new project before trying Query Viewer. Did not work.
Uninstalled CFB2. Reinstalled CFB2. Same results as 1,2,3.
Other interesting info.
In the Error Log when I start CFB2, I always get the following.
     Unable to create a template transfer. Com.adobe.rds.core
     Three more entries with No message except "No stack trace" - com.adobe.ide.coldfusion.server
This happens even after my reinstall.
Hope this helps.
Doug Smith
[email protected]

Help with Planning Query - 0CALMONTH not showing up

Hi, I have a simple planning query where I am trying to allow users to input or change an Amount by Material/Month. The User inputs a Version and a Date Range to maintain. The selected dates should show up going across the screen even if there is no existing data. These Variables are in the Query Filter along with a few other characteristic Filters. So in my query I have 0MATERIAL in the Rows and I have 0CALMONTH and my Key Figure. Under advanced for the characteristic 0CALMONTH it is set as Master Data.
When I run the query for some reason the 0CALMONTHS do not show up going across. If I run the query and put in one value then the 12 months show up. Seems like a bug. I have another similar query where this works. Can anyone take a look at the screen shots and help me figure this out?
[Query Def Screen 1|http://i35.tinypic.com/1h8con.png]
[Query Def Screen 2|http://i36.tinypic.com/1f781c.png]
[0MATERIAL Def|http://i36.tinypic.com/xefq8i.png]
[0CALMONTH Def|http://i35.tinypic.com/ej8qpv.png]
Thanks!
Edited by: Kenneth Murray on Nov 5, 2009 3:12 PM

Dear Kenneth,
I think its a bug. If we post the value without the drilldown on 0CALMONTh then its open for the input, and after that if we drill down it with 0CALMONTH for same selection, it opens for input. but for new selection of month it not opens.
Have you solved the problem?
Regards,
V B Udani

Hierarchy node in query rows not showing values in report

Hi sdn
I'm taking hierarchy node on rows and some plan and actual values on columns but i'm unable to get values in the report for only plan values
How did I reconcile the values whether that value is available in hierarchy or corresponding value's for plan data is available in the cube,pls give me clues
rubane

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

Query views not showing changes of a query

Similar Messages

Maybe you are looking for