Query views - selection screen fields double

Hi expects,
BW 3.5 SP13.
Do you know why I have double fields in WEB report selection screen ? example Month/year ?
In WEB properties I flag 'Display same variables only once'.
I have a WEB report with one table based on a query and with two charts based on query views from the query. Some fields are mandatory in selection screen Month/year.
Br,
Ole Paludan

Hi,
It's query views based on same query also use in WEB report, so variables are the same.
Query view Purpose: to get fewer key figures to charts - but still by query show all key figures in table.
BR,
Ole

Similar Messages

SAP Query and selection screen fields

Hi,
I am currently modifying a Query. I have added a new selection field. The fieldname for this selection field has been autogenerated within the query and I have pasted a bit in here:
SELECT-OPTIONS SP$00015 FOR ZERROR_FLG LOWER CASE.
SELECT-OPTIONS SP$00022 FOR KNA1-ERDAT.
SELECT-OPTIONS SP$00023 FOR KNA1-ERNAM.
SELECT-OPTIONS SP$00027 FOR ZLOEVM LOWER CASE.
SELECT-OPTIONS SP$00030 FOR ZPARTNERNO
NO INTERVALS NO-EXTENSION.
I relation to this select -option, I want to execute a few lines of code that only is executed if the user has filled in a value in teh ZPARTNERNO field. However, no matter if I use the field name ZPARTNERNO or SP$00030 it has no effect.
Any good ideas ?

HI,
In the AT SELECTIOn-SCREEN event, you can write the code
IF not SP$00030[] is initial.
write the code which you want to execute before the output
ENDIF.
if you want in START-OF-SELECTION>
IF not SP$00030[] is initial.
write the code which you want to execute before the output
ENDIF
Regards
Sudheer

How to assign maintenance view to a selection screen field in a program.

Hi Experts,
I have created a custom table. Now, I have a program where there is a selection screen field for example "Load". After entering a value in the selection screen, and press enter, the user must be redirected to the maintenance view of the custom table to modify the specifed record.
Can anyone help me on how to do that?
Thanks a lot for ur precious help.
Regards,
Aksh

Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu

Selection screen fields in query

experts
i have created a query with 5 selection screen fields, now i want to change the order of the fields in the selection screen.
Earlier:
Material
order
delivery
qty
amount
Now i want
order
material
delivery
amount qty
In sq01 i tried but there are possibility to change the output fields but not selection screen field sequence.

Hi,
In SQ01, enter the query name and click on the change button.
Next click on the next screen (top left) arrow button until you reach Change query xxxxx: Selections.
Here under the column No enter the number like 1,2,3, 4 ... against the checked fields that want to see in order. Then save the query.
Regards,

Selection screen fields in SAP Query

HI friends,
I have to make the seletion screen field as mandatory in SAP-Query.
Please let me know the procedure to make field as mandatory or Let me know how to validate the selection-screen field in Query.
Thanks in Advance,
Ravi

Go to SQ02
Select your Infoset-->Change
On next Screen.
Select GoTo->Code->Initialization.
Write there code
LOOP AT SCREEN.
IF screen-name EQ 'SP$00004'.
screen-required = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.

F4 search-help in infoset query selection-screen fields

Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia Gonçalves

Hi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves

Truncation of selection screen field in reports

Hi,
Is there any way to avoid truncation of selection screen fields in ABAP reports? For eg, I declare:
SELECT-OPTIONS: s_test FOR ztest-test_field NO INTERVALS
The length of this field in the table is 30 chars. However, on displaying the field via selection screen, this gets truncated to around 18 or so. How do I avoid this as I need to display the full length of the field?

Hi,
Try this
Tables : makt.
select-options maknr for makt-maktx.
now go to the screen painter of your program in change mode and move the Help buttons first to the Right each. now increasethe length of the Matnr Field length so that they are equal to 40 Char. in your program you have handle the length now if you want to restrict to 18 otherwise it will be ok
if they don't fit you need incease the Size of the Screen Visible area both in the Screen Painter as well as in the
Screen Attributes
You also get an Information Message just ignore that.
Just open your program in SE80 if you can't go to the screen painter in SE38. the other way just keep this program in Display mode and execute then take F1 help , take Technical Information and double click on the Screen number now go to the Screen Layout and go to Change mode here.
Regards,
Shirisha

Selection screen fields are not getting detected in an infoset in code

Hi All,
I am developing an infoset query using logical database 'PNPCE'. I am facing problem while writing a validation on selection screen fields on an infoset query at infoset code level.
The fields that are under program specific selection are determined at runtime with variables viz. SP$00001, SP$00002 etc. There are actually select options on selection screen of an infoset query.
So I cannot write a direct code on these fields as they do not exist at infoset level and hence cannot be detected.
I want to put down a validation that if user does not select anything on selection-screen and executes the query, then he should get a pop-up message 'Narrow down your search...' and he should go back to selection screen again.
Is there any alternative way to achieve this?

hi,
Your Screen resolution is more in the system that's why while creating it was fine and while executing it was gone after the next field.
so you better create a frame and place that inside it or you can change cols size in the properties about the columns you want

Selection screen fields order in report painter report..

hi experts,
i have a problem with selection screen fields order in report painter report.
Actually in report painter report selection screen order is different compare to report writer report selection screen.
how should i get the same selection screen fields order For Report painter report compare to Report Writer report ?
For example, Report Writer selection screen order is:
ledger:
company code:
period:
current fiscal year:
previous fiscal yer:
previous quarter end period:
where as Report Painter selection screen order is:
ledger:
previous fis year:
current fis year:
company code:
period:
previous quarter end period:
please help me regarding with this.
Thanks and Regards,
NAGARJUNA.

hi nagarjun,
Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
Ex:
Selection fields No
Exclude Cancelled Lots 5
Material number 1
Plant 2
Material type 3
Inspection Lot Origin 4
Regards,
Lokesh

Hiding selection screen fields upon clicking a button

Hi .
I have a requirement like we need to hide and bring back the selection screen fields upon clicking a button( Expand and collapse in the same button) .
in ABAP Query,we can maintain this, for the variant we created.
We need this functionality on the selection-screen presently.
How to achieve this in the selection -screen?
Valuale pointers are desparately needful.
Regards,
SSR.

Hi,
SELECTION SECREEN (P_) Parameter
(S_) Select Options
SELECTION-SCREEN : BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001,
BEGIN OF LINE,
COMMENT (26) C1 MODIF ID XYZ.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR MODIF ID XYZ NO-EXTENSION .
SELECTION-SCREEN : END OF LINE,
BEGIN OF LINE,
COMMENT (26) C2 MODIF ID XYZ.
SELECT-OPTIONS : S_MATKL FOR MARA-MATKL MODIF ID XYZ NO-EXTENSION .
SELECTION-SCREEN : END OF LINE.
PARAMETERS : R_MATNR RADIOBUTTON GROUP RAD1 DEFAULT 'X'
MODIF ID ABC USER-COMMAND MAT,
R_MATKL RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
C1 = 'Product Code'.
c2 = 'Product Group'.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME0(7) = 'S_MATNR' OR SCREEN-NAME0(7) = 'S_MATKL'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
ENDIF.
CASE SCREEN-NAME+0(7).
WHEN 'S_MATNR'.
IF R_MATNR = 'X'.
SCREEN-INPUT = '1'.
SCREEN-INVISIBLE = '0'.
ENDIF.
WHEN 'S_MATKL'.
IF R_MATKL = 'X'..
SCREEN-INPUT = '1'.
SCREEN-INVISIBLE = '0'.
ENDIF.
ENDCASE.
IF R_MATNR = 'X'.
IF SCREEN-NAME = 'C1'.
C1 = 'Product code'.
C2 = SPACE.
ENDIF.
ENDIF.
IF R_MATKL = 'X'.
IF SCREEN-NAME = 'C2'.
C2 = 'Product Group'.
C1 = SPACE.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Hope it helps.
best regards,
Nagaraj Kalbavi

Selection Screen - Field dehighlight

Hello All,
How can i make an Selection screen field not as an Input field.
The field is a parameter P_GJAHR which will always be set to 2005. So, i would like to see FY 2005 on the selection screen field as dehighlighted.
Would be glad if views are provided on this.
Regards,
- PSK

PARAMETERS : P_GJAHR LIKE BKPF-GJAHR MODIF ID SG1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'SG1'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Hope this helps,
Erwan.

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Selection screen field problem

Hello experts..
i have a selection screen , in that i have a field   s_bwart for mseg-bwart.
some times the user will input the data in the field and sometimes he wont. we have fixed movement types combination like
11-21 , 13-24 , 13-56 , 101-543 , 101-544 etc.
if the user did not input any thing in the selection screen , i am populating s_bwart in at-selection screen event with all the mvt types. after executing the report when user presses the back button to come to the selection screen, there the s_bwart field is containing all the mvt types in single values ie in the select options screen. So the user dont want that, if he comes back nothing should be there in the selection screen field s_bwart if he has not inputted anything. if he inputs only 11 mvt type then when he comes back after executing the report he should see only 11 in the select screen field ie s_bwart. Please send the replies on how to solve the problem.

hi,
in ur program try to display values for users in START-OF-SELECTION event as it triggers after the selection screen displayed for users. if user doesn't give any input then display default values in this event. and also create a variable
for ex:
data: ws_flag type c,
         p_value type i.
after u display default values for users in selection screen assign the flag as ' X '
ws_flag = 'X'.
before leaving ur program based on flag try to do like this.
if ws_flag = ' X '.
    clear s_data. // s_data is the select options for u.
else.
     s_data = p_value. // the value which user gave in selection screen as i/p.
endif.
if helpful reward some points.
with regards,
Suresh Aluri.

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Selection screen fields

Hi,
I want to group the selection screen fields. where should i group.
I want to group using the modif Id
T Y P E S
TYPES:
BEGIN OF TYVBAK,
VBELN TYPE VBAK-VBELN,
AUART TYPE VBAK-AUART,
AUDAT TYPE VBAK-AUDAT,
KUNNR TYPE VBAK-KUNNR,
NETWR TYPE VBAK-NETWR,
END OF TYVBAK.
D A T A      D E C L A R A T I O N S
DATA:
STVBAK TYPE TYVBAK,
ITVBAK TYPE TABLE OF TYVBAK.
S E L E C T I O N    S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SKUNNR FOR STVBAK-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
SVBELN FOR STVBAK-VBELN,
SAUDAT FOR STVBAK-AUDAT.
SELECTION-SCREEN END OF BLOCK B2.
I N I T I A L I Z A T I O N
*INITIALIZATION.
FILLING SELECT OPTIONS WITH DEFAULTS
SKUNNR-SIGN = 'I'.
SKUNNR-OPTION = 'BT'.
SKUNNR-LOW    = '1'.
SKUNNR-HIGH   = '4000000'.
APPEND SKUNNR.
T O P   O F P A G E
TOP-OF-PAGE.
WRITE:/1'SALES DOC',12 'DOC TYPE',20 'SALES DATE',32 'NETWORTH',60 'CUSTOMER'.
*A T   S E L E C T I O N    S C R E E N    O U T P U T .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'SVBELN-LOW'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-NAME = 'SVBELN-HIGH'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
where should i group SBVELN and SAUDAT

Hi
Instead of SCREEN-NAME use SCREEN-GROUP1 and for your select options give MODIF ID.
As follows
SELECTION-OPTIONS: selcrt for dobj MODIF ID MOD1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'MOD1.
SCREEN-REQUIRED = 1.
MODIFY SCREEN.
ENDLOOP.
This is COZ when you use select-options you get TWO fileds on the INPUT screen LOW and HIGH so you have to check for selcrit-low and selctri-high you can avoid all this my assigning a MODIF ID.
See this sample programs for this
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP

Query views - selection screen fields double

Similar Messages

Maybe you are looking for