Query was not successful in Discoverer viewer

Hi All,
can you please guide me on below issue..
while running the report user is facing the below error.
"query execution was not successful"
-ORA-01722 Invalid number.
Ebiz:12.0.6
DB:11.2.0.2
Disco:10.1.2.55.26
Thanks in Advance.
Regards
Kumar

while running the report user is facing the below error.
"query execution was not successful"This is a generic error which is reported in few docs.
Discoverer Viewer fails Moving Pivot Table Columns: Query Execution was not Successful [ID 948027.1]
Query Execution Not Successful Error In Viewer, Runs In Desktop And Plus [ID 404974.1]
Discoverer 10g (10.1.2.3) Plus/Viewer Cumulative Patch 7 (9112482) Readme For Linux/Unix [ID 821844.1]
Launching A Worksheet In Discoverer 10g / 11g Plus/Viewer On Linux Fails With 'Contact with backend server lost' [ID 871012.1]
Discoverer 10g (10.1.2.3) Plus/Viewer Cumulative Patch 4 (7595032) Readme For Windows [ID 822183.1]
Discoverer 10g (10.1.2.3) Plus/Viewer Cumulative Patch 3 (7319096) Readme For Linux/Unix [ID 761997.1]
Running Some Reports In Discoverer Plus/Viewer 10.1.2.2 Are Failing With "An error occurred while attempting to perform the operation. The operation did not complete successfully." [ID 733603.1]
Discoverer Viewer 10g (10.1.2.3) Passes A Blank Parameter As 'NULL' When Using A 'Drill to Link' [ID 820003.1]
Query Execution was not Successful Error When Running a Workbook [ID 550684.1]
-ORA-01722 Invalid number.Please check the data type of the column or the data type of the records in the table/view and make sure it match the data type of the column.
Thanks,
Hussein

Similar Messages

Query execution was not successful in discoverer viewer

hi all,
disco viewer is showing an error like "Query execution was not successful. -Failed to connect to database" when i ran a report(in which rank function is included), where the same report is running fine is disco desktop. am just wondering are there any settings to be changed in desktop to run like these reports in disco viewer?
ur help in this regard wil gr8ly appreciated.
thanks very much in advance.
_Rakesh Reddy.

hi,
thanks very much for your reply.
the problem is with rank function it seems, its opening in disco viewer & running in disco plus also when i remove that rank calculation. but its not even running is disco plus with that rank function.
am using 10.1.2.48.18 version of disco desktop with 10g DB.
thanks.

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

Rendition Information : A rendition set was not successfully created

Hai All,
I have installed Digital Asset in my Oracle UCM 11g. i checked in a image content with the specification rendition set field as Multiple formats. After this i searched this image content go to the Rendition information page. but it will show like as follows "A rendition set was not successfully created for this content item.".
i need view the image and video file in the content server.
Thanks,
Ragaven
Edited by: 861349 on May 25, 2011 5:02 AM

Hi
On IBR - Agent Management , turn Full verbose tracing ON .
After that checkin a content for DAM conversion and check the IBR Agent logs , post the same here to see what could be going wrong .
Thanks
Srinath

Error when posting - Call up of feature PPMOD was not successful

Good Afternoon,
We recently completed an upgrade to ECC6.0 and this week we have seen two cases of receiving an error when trying to post payroll to FI using RPCIPE00.
The error we are receiving is: Call up of feature PPMOD was not successful, Message no. 3G100
The diagnosis on the error message is: Feature PPMOD has been called to set the employee grouping for account determination. This call was unsuccessful and suggests that we check the decision tree for PPMOD.
While there have been some somewhat recent changes to PPMOD, I have stepped through the feature for both individuals who had this error and can find no problem with the logic in the decision tree. I've also regenerated the feature successfully. After searching OSS I found note 1243065, which is the exact error that we are receiving. The problem is that this note was included in HR support pack 44, and we're already on HR support pack 48. We also found a post that suggested we use RPCIPE00_OLD, but gave us the same error.
My next step was to post a customer message, but thought it would be worthwile to post something here and see if anyone has any suggestions first.
Thanks in advance,
-Nick
Edited by: Nicholas Petters on Apr 15, 2010 5:32 PM

The issue may not be related to the note you indicated as this note should already be included in your system with SP 48. Please check what personnnel areas the errors ees are in, and see if they're in the decision tree of 'PPMOD' .
If this looks OK, run payroll simulation for the error ee, put break-point in form 'CALL_549B' of program '/1PAPA/FEAT310PPMOD' and see what value STRUC-WERKS (pers. area) is when it fails.

Error while releasing :-Content item was not successfully checked

Hi
I have create a ucm user "john" which has auth type "Local" and roles of
          Admin
          contributor
          Sysmanager
"admin" role:- has Groups/rights such as
          Rights.Apss.RepMan
          Rights.Apss.Workflow
          Rights.Apss.ConfigMan
          Rights.Apps.Archiver
          newgroup(RWDA)
          release (RWDA)
          secure (RWDA)
"contributor" role :- has Groups/rights such as
          newgroup(RWDA)
          public(RW)
          release(RWDA)
          secure()
"sysmanager" role has groups/rights
          newgroup(RWDA)
          public(R)
          release(RWDA)
          secure(R)
When I am trying to release the documents I get error such as
Event generated by user 'john' at host '192.168.21.215'. Content item <undefined> was not successfully checked in. Security group is not defined. Unable to validate user security. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,john,192.168.21.215!$!csUnableToCheckIn,!csSecurityGroupNotDefined
intradoc.common.ServiceException: !csUnableToCheckIn,!csSecurityGroupNotDefined
     at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
     at intradoc.server.Service.buildServiceException(Service.java:1999)
     at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
     at intradoc.server.Service.createServiceException(Service.java:1988)
     at intradoc.server.ServiceSecurityImplementor.determinePrivilege(ServiceSecurityImplementor.java:795)
     at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:110)
     at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:67)
     at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:320)
     at intradoc.server.Service.checkSecurity(Service.java:2546)
     at intradoc.server.Service.checkSecurity(Service.java:2524)
As per the document I have given the user required group and role permission . What more should I do to release it ?
Guidance requested
Thanks
Joseph John

By release you mean you are unable to checkin a document?
How are you trying to checkin the document? DIS, SOAP, standard checkin form page??
It looks as if you haven`t supplied a security group or content id on the document meta data when you have checked in the document..
You can automatically assign content ids by going to admin server and enabling auto assign id check box.
John should only need the admin role, that will give the user full access.

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed.

I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!

Hello MArk.wijesinghe,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best of luck,
Mario

Blackberry passport cannot connect to win 7 pro device driver software was not successfully installed

I cannot get my passport to connect to eather of my PC's, one is running Win 7 Pro 64bit, and one is running Win 7 pro 32bit. both pc's give me the same driver error-"device driver software was not successfully installed" i have latest versions of Link and Blend installed on the pc's, and 10.3.0.908 on my pasport madel SQW100-1

same issue here for a z2, only windows 7 pro on virtualbox in ubuntu (linux)
very good service from sony that they reply instantly..
whats the point in a exceptional good phone with poor support??
if this poor service continues, this would be definatly my last sony device..
and build a linux version of your crappy software!! android IS linux so you have plenty developers..

MeetingPlace Express 2.1.1.2 Dial Out was not Successful

I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
==============================================================
==============================================================
Call-Config Report
Summary
WARNING:The H.323 ID should match the host name
Valid E.164 Address has been configured
H.323 gateway has been configured
Error: Dial Out was not Successful
Call-Config Report Details
H.323 Details
H.323 enabled : YES
E.164 address : 196
H.323 ID : mpxadmin
H.323 gateway 1 : 010.145.002.030
SIP enabled : YES
DialOut Session Summary
VUI Configuration: 250 Sessions, 250 Confs
*** VUI INTERNAL STATUS UTILITY ***
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 4.
Enter destination for your call: The Telephone Number is 196. Len is 3
Do you want specific ports? (t -- F): You entered f.
Placing Call .....Call was unsuccessful: Ring No Answer.
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 0.
==============================================================
==============================================================
That parameter could check?
Here I place information on the configuration of my network:
CUCM v.7.0 --> 10.145.2.10
Voice Gatweay --> 10.145.2.30
In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
Please expect your valuable help!
Thanks a lot!
ErnestoG

hi Ernesto,
As the problem you are facing is a dial out issue on MPE, go
through the checklist mentioned below in order to confirm the configuration
is intact.
Here is the checklist :
1.    Ensure that H323 GW is defined on CCM/CUCM.
Device > Gateway > find.
Look for a device name that equals either MPE's hostname, FQDN, or IP
Address.
2.    Ensure that h323 Gateways are configured on MPE.
MPE Administration Center > System Configuration > Call Configuration > H323
Configuration
Ensure that h323 is enabled.
Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
3.    Ensure that CCM's interface with MPE is up.
Ensure that MPE's IP Address is listed under the "IP Address" column.
Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
4.    Verify that MPE has the CSS required to call the destination.
FIRST, FIND MPE's CSS:
When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
Inbound
THEN the relevant config is under Device > "Call Routing Information -
Inbound Calls" > Calling Search Space
SECOND, FIND DESTINATION PATTERN's PARTITION:
If the destination is an IP Phone within the CCM/CUCM Cluster, then the
relevant config is under Device > Phone > click on Directory Number in CCM.
If the destination is a PSTN endpoint/phone, then the relevant config is
under Device > Route Pattern.
5.    Ensure that your user profile is set to allow outdials.
MPE Administration Center > User Configuration > User Profile Management >
Your User Profile > Can call out of meetings should be set to "Yes".
6.    When you place a call from from the CLI, the system applies permissions
from the "Guest" User profile since mpxadmin or root are not Users within
the MPX application. To allow this to work, you need to verify two
settings:
MPE Administration Center > User Configuration > User Profile Management >
Guest > Can call out of meetings should be set to "Yes".
Ensure that the Guest profile is not in a "locked" state.
MPE Administration Center > System Configuration > Usage Configuration >
Allow Guest outdials should be set to "Yes".
Hope this helps!
Thanks,
Karthik

When i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

when i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

Photoshop Elements 1.0.1 seems like very old software 2001 I believe. Try asking in the Elements maybe someone there will be able to answer your question. Photoshop Elements

I just downloaded a new software update to my ipod touch and now my ipod is frozen with a screen picture of music round blue symbol and an arrow displaying a cable connection. I received a message saying that the download was not successful.

I just downloaded a new software update to my ipod touch and now the ipod and screen are frozen. I received a message that the download was not successful and now my screen is showing the blue round itunes symbol with an arrow pointing to the symbol and shows a cable below it. I have tried the restart of pushing the two buttons together and waiting 10 seconds for the apple symbol which appears and then go backs to the same stuck symbol. My computer is not recognizing the ipod either and will not connect. What needs to be done? Thanks.

Try manually placin the iPod in Recovery Mode and restore via iTunes.
Next try DFU mode and restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

HT5706 AppleTV fails updating, reports "The update was not successful."

Cutrrently my AppleTV is at version 6.0.2 (6646.81.1) connected to my network via ethernet. When I attempt to update my AppleTV, It downloads the update, begins step 1 of 2, preparing update, then it fails with the message "The update was not successful."

wait a while and try again
when one downloads something over the Internet the bits can get corrupted and in the process making the update broken the system detects that and will not try to update with the broken update
when people download things over the Internet the isp (internet service provider) they use cache the data for a while so if another one of their users or the same user download it again right away they will get the cached data from the isp rather having to transfer the data all the way from the original site this saves time and money in most cases
but it also mean if the data gets corrupted you have to wait a bit for their cache to flush before you try again
the process of isp's detecting if all of the data in their caches was valid would mean a lot of processing on their behalf making your isp bill higher so waiting a bit every now and then is pref'd in the eyes of most

Query was not successful in Discoverer viewer

Similar Messages

Maybe you are looking for