Query/web template coming up blank in the portal

Hi,
I got one requirement saying that query/web template coming up blank in the portal.I have checked in portal it is blank.
I don't have much knowledge about portal. I am not able to find this query name in the SAP gui(dev,q prod).can we publish the query with out creating in BEx .I don't understand can you please help me to resolve ths issue.
Thanks
Murali

I don't know where to find the URL that the iView is pointing to...?Please guide me .
Finally i came to know that the base query and one of the view is not populating the data in portal other views are populating the data.the views are created based on region(usa,europe..etc).I have executed this view and base query in BEx I am getting the error "internal error receiving from the bw serverfailed bw server raised exception:SYSTEM_ FAILURE. I think due to that the data is not populating in th portal. Please let me know how to resolve this issue.
Thanks
Murali

Similar Messages

Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Disable link of BEX 3.5 query web template

Dear All,
we migrated all BEX queries from 3.5 to 7.x. Since our users use the BEX queries via web template, most of then have the web template links of old 3.5 queries saved as bookmarks in their browser.
Is there a way to disable this link server side, in order to force the user to update theyr link with the new one of BEX 7.x query web template?
Thanks

Hi,
> You may delete all 3.X bookmarks. The standard 3.X bookmark administration can be found in transaction RUNSCHED.
All below options mean, that you also cannot use the Broadcaster anymore !
> You may deactivate service /sap/bw/BEx in SICF. Users will get an ICF error message (Service not found).
> You may create your own handler on ICF service sap/bw/BEx, providing an appropriate message for users.
> Your can create your own redirect/logon/error page on this service.
> Another very drastic option would be to switch off service HTTP(S) in your ICM. In this case, no web applications are available via that service on the system anymore.
regards,
Martin

The Web template does not exist in the master system

We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

Make sure the template exists in the system which is configured in the iView property.
There should be a one to one mapping between BI and EP systems.
You cannot connect 2 BI system to one EP system and configure BI JAVA

Report/Query/Web Template Listing - Catalog

Hi all,
We are NW2004S SP10 and would like to know if anyone has implemented a report catalog that lists all the custom reports/queries created by functional area?
We could search the Metadata repository, but it is not organized well.
Also I have looked at an article in BWExpert - which is for BW3.5 and also requires manual maintainence.
Any ideas/thoughts in this regard will be appreciated.
HD

I have similar issues related to the below threads. I'm able to retrieve the statistics for queries executed in BEx but not for the queries or BEx Web templates executed through the portal. Are there any workarounds for this issue?
How to find BEx queries that were not used along with no of times executed
/thread/716593 [original link is broken]
Please suggest.

Content Query Web Part hasn't data in the first step.

I have a problem with the deployment of Content Query Web Part programmatically.
When I do the deployment, the Web Part appears in the required page with the correct configuration, but the problem is that it hasn't data. If I edit the page and I do click in "Apply" button of the Web Part, the data appears perfectly.
Do you know anything about this?
Thanks !!

Hi Magnus, thanks for your quick response.
I'm deploying and adding this webpart in code-behind
ContentByQueryWebPart cqwp = new ContentByQueryWebPart();
cqwp.MainXslLink = "/Style Library/XSL Style Sheets/ContentQueryMain.xsl";
cqwp.Title = "Recently Documents";
cqwp.ItemStyle = "WithDocIcon";
cqwp.ChromeType = PartChromeType.Default;
cqwp.ItemLimit = 15;
cqwp.WebUrl = currentWeb.ServerRelativeUrl;
cqwp.SortBy = "Modified";
cqwp.SortByDirection = ContentByQueryWebPart.SortDirection.Desc;
cqwp.BaseType = "101";
cqwp.UseCache = false;
cqwp.AsyncRefresh = true;
cqwp.AutoRefresh = true;
PublishingWeb pweb = PublishingWeb.GetPublishingWeb(web);
cqwp.Update(pweb);
webPartManager.AddWebPart(cqwp, "Left", 0);
webPartManager.SaveChanges(cqwp);
Regards,

Dynamic Web Template Override in an IView in the portal

We have successfully copied and changed the default web template for displaying queries in the portal and it works fine. We also use BI planning and would like to use a different template when a planning query is executed. Does anyone know if there is a way to override the default template for a query on a case by case basis? That is, when creating the web template IView, can an alternate web template somehow be specified in addition to the query or is there any exit that provides this type of control?

Hi,
sorry, this is no solution - but I can confirm the problem with anonymous service access. Maybe It is helping a little bit enclosing the problem.
It occurs regardless of authentication mode of the accessed service from iView. It happens with all system objects (web services and other PCD Systems). This problem is regardless of the Web Service or system authentication method. For auth services we tried user mapping - but doesn't work like with non-auth. services.
I can confirm that there are no problems running the same config with an authenticated portal user.
Technicaly the anonymous user is a authenticated user too, (J2EE_GUEST). He is logged in automatically during portal access with the browser. It seems there is a restriction in handling the anonymous group.
There is a other 4 week old thread on SDN, relating to the same problem (unsolved) "an XML element was malformed" error with anonymous user
I keep looking for a solution.
Regards
Michael

Problem With the Web Template in the QA when moved from DEV

Hi SAP gurus,
I am Working in BI 7.0 SP16 . Actually I had Designed and Published a web template which generates graphs in the Portal.
In WAD
In the chart options, for X-axis, for the text direction i have changed to Diagonal UP and font for the text is "Arial" and style is "bold".
when I execute the Web template in Development System all the queries , graph and font is working fyn.....but when I transported to the QA system
the problem is:
When I executed the Web template in QA , the graph is generating fyn and the queries r running fyn but the font changed to "Times New Roman " , the direction of the text is "Horizontal" and the style is "Normal"
and when i checked the chart options in QA i can see all the options are right i.e what i had given in the development system the text direction " Diagonal UP" and font for the text is "Arial" and style is "bold".
this was the frst graph that i was generated in the WAD in DEV moved to QA.......so wat could be the problem.....Is there any problem vith the configuration issue in the portal side in QA or any connection problem in the portal?
can any one help me to solve this issue?
Thanks ,
Aravind

Hi sriman,
when u want to edit the chart-> rgt click on the chart and select the edit option
-> it vill take to the other window
-> at the bottom of the chart there is a button refine.click that button.it vill take to the others options for the chart.
->click the category axis(X-axis) or to the right of the chart, u can c the chart options,go to the category axis ,expand the categoryaxis option.
-> under the category option, there vill be four options Line, Grid line,Title and Unit.
-> Select the Line option,at the bottom of that window, u can c the option for the Line.
-> go to the text properties, u can change the text wat u want.
regards,
Aravind.

Publishing Web Templates on Portal

Hi Guys,
I have to schedule the precaculated web templates and publish them on the portal. So far so good. I am not able to figure out how will I dynamically set the vairbles in order to schedule the Templates daily. E.g. I need to have a Key date as sy-datum - 1 (yesterday). How will I be able to set it up?
Thanks in advance. Would sure award points for this.
Cheers
Kirk

Thank you for your reply. I had already thought over it before posting this on SDN. It will make entire report rigid will lose the flexibility of running it for Key Date user wants.
I NEED TO HAVE CAKE AND EAT IT TOO
Hope you getting my point.
Cheers
Kirk

Currency Translation at the Web Template level (standard functionality)

Hi Experts ,
We are currently working in BI 7.0 env. with source system ECC 5.0.
We are working for a task where we need to make the BEx queries enabled for currency translation .
The requirement is :-
The user should be enable to give/opt/choose for the follwoing options:-
Currency type (target currency in which the translation is aimed)
Exchange Rate ( Standard(M) or other(P) or something else) and
Key date: The translation will be performed taking the exchange rate on that particular date.
We do have 2 option to perform the task...
1:- Either we do it thru currency translation type definition(RSCUR) and then attaching this currency translation for every amount key figure values at each query level. OR
2:- If we can go and find something at the Web Template level and add/modify the template in such a way so that it gives us the functionality to translate a source currency into a desired one with desired exchange rate type (currently either M or P) and for a specific date.
At this point of time when we do have numerous sub-areas holding hundreds of queries, we want something which should be available as the modification/addition to standard functionality at the web template level and not at the query level as changing each and every one of them and testing would be a cumbersome process and would be costly and risky at the same time. So we are just wondering if we can find something with option no. 2 and add/modify something in the standard functionality.
Please ask for any more information required.
Thanks very much.
regds.

Hi Amit,
You would still need to define the Currency Translation using RSCUR where you would specify
-the exchange rate type (either fixed or variable)
-the target currency (either fixed or variable)
-the reference date
You don't need to modify any of your queries. You can instead use 'Translate Currency'/[SET_CURRENCY_TRANSLATION] command in WAD & specify the Currency Translation as defined in RSCUR. If you want the target currency & exchange rate type to be driven by user input, you can define these as variables in RSCUR & invoke the variable screen using 'OPEN_VARIABLE_DIALOG' in WAD for user input just before calling 'SET_CURRENCY_TRANSLATION' command.
--Priya

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to show Descriptions of Query on a Web template(statistics)

hi I have created a custom Query which shows data for certain queries running, but the data keeps on showing me technical name of the queries, I want my report to show description so it makes sense to my manager as they donu2019t understand technical names of the queries. I have tried changing them to text, key etc they wont work.
Query is 7.0 web template is 7.0

Amer,
Actually, the way I read these notes, showing the technical name on the query selection screen is the problem (a.k.a., "symptom") that is being addressed, so I am assuming that the "fix" they are implementing is to show the description instead.
Just trying to help...
Bob

How to set default Web Template for BEx Query iViews in Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE

Hi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

Query/web template coming up blank in the portal

Similar Messages

Maybe you are looking for