Query with regards to installation of Infinity fol...

Following my home move my infinity installation differed from my previous address and I was generally disappointed with the engineer. The RJ11 (think thats the name of the cable) that runs from my openreach modem to the master socket is connected to the side of the master socket faceplate rather than the simply putting the cable into the front. This differed to my previous address where I simply plugged the RJ11 cable into the master socket.
Now the other end of the RJ11 runs into my bedroom upstairs as this is where I wanted my homehub to be. However I have a few gripes with what the engiineer did. Firstly he left me around 5 metres short and secondly didn't even bother to drill through any walls. So the cable is between the crack of the door which of course means I couldn't shut my bedroom door. Just to explain, the RJ11 cable from my master socket runs into a white small box which allows another RJ11 to be connected on the other end.
The other day I lost connection and knew the cause was this extended RJ11 cable as my connection was fine if I plugged the RJ11, Modem, Hub directly into the RJ11 port on the front of my master socket. The cause was the tiny blue cable had snapped off the small white box that extends into my bedroom. Thankfully it was easy to fix myself. However when I did so my speed went from 45mbps to 67mbps! This to me suggests the cable was incorrectly connected.
My last question is why if I connect the RJ11, Modem, Hub directly into the front of my master socket is the speed around 20-30mbps slower than if I use the RJ11 that is connected to the side of the master socket?
Sorry I have one more question. Im still using the Home Hub 4 and was expecting BT to send me a Home Hub 5. I thought following a home move my contract was renewed which mean't I automatically qualified for a new home hub?
If anyone is confused by my installation I can upload some pics.

Hi DJM,
It does sound like a bit of a strange set up. I can take a look at this for you. Please send me in your details using the "Contact The Mods" link found in my profile.
With regards to the Hub 4 a home move order would renew your current package for the further 12 months and would not include the Hub 5.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Similar Messages

Trusted.certs question with regards to Installation and Upgrading Java

Greetings,
Thank you to all who take the time to read this especially those who can provide some answers!
Question #1:
I read that trusted.certs was not backwards compatible for Java. By this I mean that a "Java Runtime 6 Update 11" generated trusted.certs could not be read / used by "Java Runtime 6 Update 26". Is this correct?
Question #2:
Part A: Does a fresh install of Java create the trusted.certs file upon installation or at the time Java is first run after install?
Part B: When the trusted.certs is created does it do a file check to see if trusted.certs file already exists? If so does it delete and generate a fresh trusted.certs or does it leave the existing file?
Reason I ask this is that we are getting a java.io.FileNotfoundException for the trusted.certs file. This I believe to be caused by a failed upgrade of Java. When uninstalling "Java Runtime 6 Update 26" it displays "Java Runtime 6 Update 11". This leads me to believe that the trusted.certs is still for Update 11 and not Update 26 which would cause this error even after a fresh install of Java.
I would love your input and knowledge! Thank you again for your time!

I am not aware of any trusted.certs file being distributed with Java. Are you referring to the cacerts file?

Error executing a query with large result set

Dear all,
after executing a query which uses key figures with exception aggregation the BIA-server log (TrexIndexServerAlert_....trc) displays the following messages:
2009-09-29 10:59:00.433 e QMediator    QueryMediator.cpp(00324) : 6952; Error executing physical plan: AttributeEngine: not enough memory.;in executor::Executor in cube: bwp_v_tl_c02
2009-09-29 10:59:00.434 e SERVER_TRACE TRexApiSearch.cpp(05162) : IndexID: bwp_v_tl_c02, QueryMediator failed executing query, reason: Error executing physical plan: AttributeEngine: not enough memory.;in executor::Executor in cube: bwp_v_tl_c02
--> Does anyone know what this message exactly means? - I fear that the BIA-Installation is running out of physical memory, but I appreciate any other opinion.
- Package Wise Read (SAP Note 1157582) does not solve the problem as the error message is not: "AggregateCalculator returning out of memory with hash table size..."
- To get an impression of the data amount I had a look at table RSDDSTAT_OLAP of a query with less amount of data:
   Selected rows      : 50.000.000 (Event 9011)
   Transferred rows :   4.800.000 (Event 9010)
It is possible to calculate the number of cells retreived from one index by multiplying the number of records from table RSDDSTAT_OLAP by the number of key figures from the query. In my example it is only one key figure so 4.800.000 are passed to the analytical engine.
--> Is there a possibility to find this figure in some kind of statistic table? This would be helpful for complex queries.
I am looking forward to your replies,
Best regards
Bjoern

Hi Björn,
I recommend you to upgrade to rev 52 or 53. Rev. 49 is really stable but there are some bugs in it and if you use BW SP >= 17 you can use some features.
Please refer to this thread , you shouldn't´t use more than 50% (the other 50% are for reporting) of your memory, therefor I have stolen this quote from Vitaliy:
The idea is that data all together for all of your BIA Indexes does not consume more then 50% of total RAM of active blades (page memory cannot be counted!).
The simpliest test is during a period when no one is using the accelerator, remove all indexes (including temporary) from main memory of the BWA, and then load all indexes for all InfoCubes into ain memory. Then check your RAM utilization.
Regards,
-Vitaliy
Regards,
Jens

How to create an ABAP Query with OR logical expression in the select-where

Hi,
In trying to create an ABAP query with parameters. So it will select data where fields are equal to the parameters entered. The default logical expression is SELECT.. WHERE... AND.. However I want to have an OR logical expression instead of AND.. how can I attain this??
Please help me on this.. Points will be rewarded.
Thanks a lot.
Regards,
Question Man

Hi Bhupal, Shanthi, and Saipriya,
Thanks for your replies. But that didn't answer my question.
Bhupal,
You cannot just replace AND with OR in an ABAP QUERY. ABAP QUERY is a self generated SAP code. You'll just declare the tables, input parameters and output fields to be displayed and it will create a SAP standard code. If you'll try to change the code and replace the AND with OR in the SAP standard code, the system will require you to enter access key/object key for that particular query.
Shanthi,
Yes, that is exactly what need to have. I need to retireve DATA whenever one of the conditions was satisfied.
Saipriya,
Like what I have said, this is a standard SAP code so we can't do your suggestion.
I have already tried to insert a code in the ABAP query (there's a part there wherein you can have extra code) but that didn't work. Can anybody help me on this.
Thanks a lot.
Points will be rewarded.
Regards,
Question Man

Error while trying to Execute the Query with Customer Exit

Hi Experts,
I am having a Query with Customer Exit, it is working fine for all the Employess, except for one. When i try to remove the Customer Exit it is working for her too. Below is the error i am getting.
system error in program SAPLLRK0 and form RSRDR; CHECK_NAV_INIT_BACK
Thanks,
Kris.

Hello Kris,
Are you working with multiprovider? Please check if OSS notes 813454,840080 or 578948 are applicable in your case.
Regards,
Praveen

SQL query with Bind variable with slower execution plan

I have a 'normal' sql select-insert statement (not using bind variable) and it yields the following execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=7 Card=1 Bytes=148)
1 0 HASH JOIN (Cost=7 Card=1 Bytes=148)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=4 Card=1 Bytes=100)
3 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=3 Card=1)
4 1 INDEX (FAST FULL SCAN) OF 'TABLEB_IDX_003' (NON-UNIQUE)
(Cost=2 Card=135 Bytes=6480)
Statistics
0 recursive calls
18 db block gets
15558 consistent gets
47 physical reads
9896 redo size
423 bytes sent via SQL*Net to client
1095 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
I have the same query but instead running using bind variable (I test it with both oracle form and SQL*plus), it takes considerably longer with a different execution plan:-
Execution Plan
0 INSERT STATEMENT Optimizer=CHOOSE (Cost=407 Card=1 Bytes=148)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'TABLEA' (Cost=3 Card=1 Bytes=100)
2 1 NESTED LOOPS (Cost=407 Card=1 Bytes=148)
3 2 INDEX (FAST FULL SCAN) OF TABLEB_IDX_003' (NON-UNIQUE) (Cost=2 Card=135 Bytes=6480)
4 2 INDEX (RANGE SCAN) OF 'TABLEA_IDX_2' (NON-UNIQUE) (Cost=2 Card=1)
Statistics
0 recursive calls
12 db block gets
3003199 consistent gets
54 physical reads
9448 redo size
423 bytes sent via SQL*Net to client
1258 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
55 rows processed
TABLEA has around 3million record while TABLEB has 300 records. Is there anyway I can improve the speed of the sql query with bind variable? I have DBA Access to the database
Regards
Ivan

Many thanks for your reply.
I have run the statistic already for the both tableA and tableB as well all the indexes associated with both table (using dbms_stats, I am on 9i db ) but not the indexed columns.
for table I use:-
begin
dbms_stats.gather_table_stats(ownname=> 'IVAN', tabname=> 'TABLEA', partname=> NULL);
end;
for index I use:-
begin
dbms_stats.gather_index_stats(ownname=> 'IVAN', indname=> 'TABLEB_IDX_003', partname=> NULL);
end;
Is it possible to show me a sample of how to collect statisc for INDEX columns stats?
regards
Ivan

Query with tables VEPVG, VBAK, VBAP AND KONV

hi all,
I have a requirement, that is Open Sale Orders which is having Special Discount. I am trying to write a Query, But KONV table is not coming into the joins. my execution plans is bellow
VEPVG --> VBAK vbak-knumv = konv-knumv and konv-kschl = Special Discount
VBAP
Please explain me, how to design the query with conditions.
Thanks & Regards,
Srinivas

Hi,
Have you referred this help document.
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Regards - Shree

Broadcast a BW 7.0 query with BW 3.5 broadcaster?

Hi Folks,
is there a trick that allows to broadcast a BW 7.0 query with the BW 3.5 broadcaster?
On the precal server BEX 3.5 / 7.0 is installed so in theory there shouldn't be an issue.
But in the BW 3.5 broadcaster I don't see BEX 7.0 queries as all (for html) nor BEX 7.0 workbooks.
As we don't have BI JAVA stack we don't have BW 7.0 broadcaster ...
Any ideas / workarounds / tricks?
Thanks,
Axel

Hi,
Pls check the links----
Issues with broadcasting 3.5 workbooks after migration to 7.1
Broadcaster not working from BEX Analyzer 7.0
Not able to broadcast query.
Regards,
Suman

Report and ready for input Query, with similar shadings are confusing

Some customers mix report and planning queries in their templates.
usually the shades for PLAN Queries are
o white - ready vor input
o blue- display data (e.g. LY, calc KPI)
In a Query with NO INPUT ready Cells the query has a zebra shading, blue and white, row by row.
That is confusion for users if they believe every Number on a white background can be changed.
Is it possible to change the shading for reporting queries to blue only?
Best Regards,
Georg

Hi.
You can cancel zebra by setting off for ALTERNATE_STYLES in properties if analysis item in WAD, BUT it sets all cells as WHITE and not blue.
I dont know how it will be usefull, but you may try ...
Regards.

Query with parameter as Array (UDT) very slow

Hi.
I have following Problem. I try to use Oracle Instant Client 11 and ODP.NET to pass Arrays in SELECT statements as Bind Parameters. I did it, but it runs very-very slow. Example:
- Inittial Query:
SELECT tbl1.field1, tbl1.field2, tbl2.field1, tbl2.field2 ... FROM tbl1
LEFT JOIN tbl2 ON tbl1.field11=tbl2.field0
LEFT JOIN tbl3 ON tbl2.field11=tbl3.field0 AND tbll1.field5=tbl3.field1
...and another LEFT JOINS
WHERE
tbl1.field0 IN ('id01', 'id02', 'id03'...)
this query with 100 elements in "IN" on my database takes 3 seconds.
- Query with Array bind:
in Oracle I did UDT: create or replace type myschema.mytype as table of varchar2(1000)
than, as described in Oracle Example I did few classes (Factory and implementing IOracleCustomType) and use it in Query,
instead of IN ('id01', 'id02', 'id03'...) I have tbl1.field0 IN (select column_value from table(:prmTable)), and :prmTable is bound array.
this query takes 190 seconds!!! Why? I works, but the HDD of Oracle server works very hard, and it takes too long.
Oracle server we habe 10g.
PS: I tried to use only 5 elements in array - the same result, it takes also 190 seconds...
Please help!

I did (some time ago and it was a packaged procedure) something like
Procedure p(p_one in datatype,p_two in datatype,p_dataset out sys_refcursor) is
the_sql varchar2(32000);
the_cursor sys_refcursor;
begin
the_sql = 'WITH NOTIFICACAO AS( ' ||
            '      SELECT ' ||
            '       t1.cd_consultora, ' ||
            '                               where       t1.dt_notificacao_cn >= to_date(''01/09/2006'',''dd/mm/yyyy'') ' || -- note the ''
            '           where rownum <= :W_TO_REC) ' ||   -- parameter 1
            '         where r_linha >= :W_FROM_REC ';     -- parameter 2
open the_cursor for the_sql using p_one,p_two; -- just by the book
end p;if I remember correctly
Regards
Etbin

How can I create a query with tables in INFOSET?

Dear Gurus,
How can I create a query with tables in INFOSET?
Just tables and fields INFOSET?
Kind Regards,

Hello
Check following SCN Article for your understanding/reference:
- [Using Infoset Query ,SAP Query and Quick Viewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5]
Regards
JP

Query with subquery should return value but doesn't

When I run this SQL, it returns no value:
SELECT vfn.cat
FROM vps_fishery_ner vfn, valid_fishery vf
WHERE vfn.plan = vf.plan
AND vfn.cat = vf.cat
AND vf.permit_year = 2010
AND vf.moratorium_fishery = 'T'
AND vfn.vp_num = 211652
AND vfn.ap_year = 2010
AND vfn.plan = 'MUL'
AND vfn.date_issued = (SELECT MAX(date_issued)
FROM vps_fishery_ner
WHERE vp_num = 211652
AND ap_year = 2010);
In order to test, I take out the subquery and run it separately:
SELECT MAX(date_issued)
FROM vps_fishery_ner
WHERE vp_num = 211652
AND ap_year = 2010;
Returns 02-APR-10
Then I paste this date into the original query (using the TRUNC function, of course, since I hardcode only the DDMMYY part of the date):
SELECT vfn.cat
FROM vps_fishery_ner vfn, valid_fishery vf
WHERE vfn.plan = vf.plan
AND vfn.cat = vf.cat
AND vf.permit_year = 2010
AND vf.moratorium_fishery = 'T'
AND vfn.vp_num = 211652
AND vfn.ap_year = 2010
AND vfn.plan = 'MUL'
AND TRUNC(date_issued) = TO_DATE('02-APR-10');
And this returns the required value, 'A'.
So why doesn't the full query with subquery work, if the value that is returned by the subquery is valid and works when you just paste it in?
Thanks.

Hi,
Not sure about your question.
But you say when you uss 01-apr-10 you get the expected results.
So why dont you try using trunc on botht sides
SELECT vfn.cat
FROM vps_fishery_ner vfn, valid_fishery vf
WHERE vfn.plan = vf.plan
   AND vfn.cat = vf.cat
   AND vf.permit_year = 2010
   AND vf.moratorium_fishery = 'T'
   AND vfn.vp_num = 211652
   AND vfn.ap_year = 2010
   AND vfn.plan = 'MUL'
   AND trunc(vfn.date_issued) = (SELECT MAX(trunc(date_issued))
                            FROM vps_fishery_ner
                           WHERE vp_num = 211652
                             AND ap_year = 2010);Rememeber if you are couting on some Index to be used you might want to recheck.
IN answer to your question why it does not return with subquery included, because the TIME PART is not the same.
You yourself proved it by using the supplying only the date part.
Regards,
Bhushan

Input query with dynamic actual & forecast values by month per year

Hello,
I am working on a Input ready query for a forecasting application which shows both actuals and forecast numbers and the user will revise the forecast numbers by month
Requirement: I want to build a Input query for monthly forecasting for the current year. It will be dynamic rolling of months with actuals & forecast data.
E.g. My report has 12 months for the current year
and if run the report in May, the months before May has to show the actuals and the months after May has to show the old forecast data so that the user will revise the numbers again in each month and save the data to the real time cube.
Jan.Feb.Mar.Apr.May.Jun.Jul.Aug.Sept.Nov.Dec
Act Act Act Act Act Old frcst for the remaining months
user will revise forecast for these months
So, i am able to create Input query with all restricted key figures( plan kf has change mode set to change, actual kf are not set change) and calculate key figures and all the logic is done on dynamically moving/rolling the data based on the input month of the year.
But the problem is that i am using cal kf to dynamically roll months, i was not able to set the change option for the cal kf.
So, how can i make sure that the dynamically changed plan months will open for entering forecast and the actuals months not to change?
Do you guys have any better solutions in implementing it?
I really appreciate it your input....:)
Thanks,
Srini

Hi,
Please look at the following DOC which may be useful to you and if so please grant me point.
Regards,
SUbha'
Input-Ready Query
Use
You use input-ready queries to create applications for manual planning. These can range from simple data entry scenarios to complex planning applications.
Integration
You define a query that you want to use for manual planning in the BEx Query Designer (see Defining New Queries).
In the Web Application Designer or the BEx Analyzer, you can combine the input-ready queries with other queries and planning functions to create complex planning applications.
Prerequisites
You can define an input-ready query on any of the following InfoProviders:
●     Aggregation levels (see Aggregation Levels)
●     MultiProviders that include at least one simple aggregation level
The aggregation levels are created in the planning modeler; MultiProviders are defined in the modeling functional area of the Data Warehousing Workbench.
Features
Definition of an Input-Ready Query
Once you have defined a query on an InfoProvider, you see the Planning tab page under the Properties of structural components (for example, in key figures or restricted key figures). The options provided there allow you to determine which structural components of an input-ready query are to be input ready at runtime and which are not. With structural components that are not input ready, you can also determine whether these components are viewed as reference data or are just protected against manual entry.
For the structural components, you also have the following options:
Input readiness of structural components of a query
Option
Description
Not input ready (reference data)
If they are being used as reference data, the structural components are not protected by data locks to ensure exclusive access for one user because this data serves as a reference for many users.
This is the default setting.
Not input ready (no reference data)
If you want to protect structural components against manual entries but allow changes by planning functions, you can use locks to protect this data for one particular user. In this way you can ensure that the planning function works with the displayed data only and not with data that has been changed by other users.
Input ready
You can also determine whether an input ready query is to be started in change mode or in display mode. You find this property in the Query Properties on the Planning tab page. If there is at least one input-ready query component, the query (as long as it has not been determined otherwise) is started in display mode.
In BI applications that use input ready queries as data providers, you can enter data manually at runtime. For more information, see Performing Manual Planning and Creation of Planning Applications.
Example
You want to create an input-ready query for manual planning for a plan-actual comparison of revenues for a set of products. You want the plan data in a real-time-enabled InfoCube and the actual data in a standard InfoCube.
       1.      Create a MultiProvider that includes the InfoCubes for the plan and actual data.
       2.      Define an aggregation level on the MultiProvider which contains the characteristic Product and the key figure Revenue.
       3.      On the aggregation level, create two restricted key figures Plan Revenue and Actual Revenue. For restriction, choose the characteristic 0INFOPROV and restrict it to the plan or actual InfoCube.
       4.      Add the restricted key figures to the key figure structure. Insert Product into the rows. For Plan Revenue, choose Input Ready for the input-readiness option. For Actual Revenue, choose the option Not Input Ready (Reference Data).
       5.      In the query properties, set the indicator that determines whether the queries are started in display or change mode as required.
Example of an input-ready query
Product
Plan Revenue
Actual Revenue
P01
20
P02
30
If you want to keep actual and plan data in a real-time enabled InfoCube, you do not require a MultiProvider for the task described above. Create an aggregation level on the InfoCube and define the input-ready query for the aggregation level. In the example above, a version characteristic acts as the InfoProvider. Create restricted key figures with the plan or actual version and proceed as in the previous example.

Problem in query with the u0091Document numberu0092

Hi,
I got problem in query with the Document number
There are three columns in the cube 1) Document number 2) Country 3) Count
In the cube there are multiple entries for same document number as below.
      Document number           country          Count
     10000               US          1
     10001               US          1
     10002               US          1
     10002               US          1
     10002               US          1
     10003               UK          1
     10004               IN          1
     10004               IN          1
When I ran the query on this cube for country US it shows count as 5 but I want count as 3 (i.e. it has to take count only once for the same document nos)
Similarly for country IN I want count as 1

Hi,
You have to create a counter based on the document number (exception aggregation). There is a How-to paper available for this. It is called: How-to...count the occurences of a characteristic.
Regards,
P.

How to write XSJS Select Query with input parameters

Hello Experts,
I am creating a xsjs file and in that file I am trying to write a Select Query based on a Calculation View
I have tried it the following way:
var query = 'SELECT TOP 100 \"Name\", \"Address\", \"City\", \"Country\" FROM \"_SYS_BIC\".\"Test.HL/AddressView\"'
+ 'WITH PARAMETERS(\'PLACEHOLDER\' = (\'$$P_Name$$\', \' Akhil \'),'
+ '\'PLACEHOLDER\' = (\'$$P_City$$\', \' Lucknow \'))';
But it gives me the "Mixed spaces and tabs error".
How should I write XSJS Select Query with input parameters?
Regards,
Rohit

>But it gives me the "Mixed spaces and tabs error".
Mixed spaces and tabs has nothing to do with the syntax of the statement. You used both spaces and the tab in the content - which JSLint doesn't like. Remove the beginning spaces of each line and use only one or the other.
The actual syntax of your statement doesn't look right. The problem is that you are escaping the \ when you don't need to if you are using ' instead of " for your string. You escape with \" in the first line but then escape with \' in the 2nd and 3rd line. That is going to cause serious parsing problems with the command.

Query with regards to installation of Infinity fol...

Similar Messages

Maybe you are looking for