Question about 865PE Platinium board?

hey guys,
can anybody help me in good operation of 865PE Platinium board, i first started it, i heard large amount of noise from CPU fan i thought it would be finished soon but no progress then i installed MSI Corecenter and the sound died, that does mean MSI Core center works good right and one more question i installed latest MSI Live Update 3.6 version it came with live monitor what does live monitor do ? i mean live update not live monitor ?
any way the main question is i found that my CPU temperature is 51 C and system is 41 C is this temperate ok i mean if i turn on the Air Conditioner no affect neither room fan although there is no direct sunlight or anything and the other fact that i am living in a city which is very hot like 45-49 C usually . so what do i do i got two fans in the system one is power fand and the other is additional heat deciptation fan but the CPU is hot why? i have the following system
2.40 Prescott CPU
865PE Platiunium board
256 Kingston 400 Mhz single chip
MSI Geforce FX 5200 T128 (64bit) cause that was only available
i got a stabimatic stabilizer 500 V ok and i got monitor of Philips 14 inch with direct power cable to the CPU not seperate power only from CPU.
i proceed by turning the stabilizer on then monitor and then CPU cause big burden on the power of the monitor
help me out guys

I'll say, prove your uncle wrong then . I have my MSI 865PE Neo2 and MSI FX5950Ultra(see my signature below) running for 1 yr 6 months w/o any problems.
First of all, I just want to tell you that your NB chipset only comes with a NB heatsink w/o fan, so corecenter will report N/A on NB fan. Next corecenter will only detect the fan speeds from the CPU Fan and NB Fan(if any) that's connected to the 3 pin SFAN connector.
SpeedFan is definately a better alternative if you decide to switched detection utilities but the same goes for speedfan utility, where it'll report N/A if nothing is detected. It doesn't matters how many fans you have in a system, when it comes to detection of Fans and Fan Speeds, it totally depends on what is actually connected to the correct connectors.
Next, if you want a stable airflow within the system, you've got to try placing the inlet fans near to the bottom of the chassis and the exhuast fans near the top rear of the chassis. Too many fans isn't good, a 3 fans system will do just nice to maintain good airflow in and out.
You may want to refer to the Mobo Burnt Prevention Guide under my signature to get some ideas on what are the areas that could burnt a mobo/hardware/system down.

Similar Messages

Question about the logic board and video

Hi, i own a macbook pro 17 in. @ 2.4 ghz, and have the nvida 8600 gt card. I'm pretty sure that the card has failed since no video has shown up during start up 2 weeks ago (i asked a friend of mine, and he had the same problem with a macbook pro 15 in., he was pretty positive on a card failure). I brought it to the local genius bar, and they fixed some firmware or whatnot, and it worked fine for a week. A week later, the same problem of no video showed up during start up.
My question is if this is a video card issue, is it possible that the logic board could have been damaged from the faulty video card? The tech. told me that it might be the board, and im afraid of paying the hefty repair fee, although i personally feel that the card is all to blame.

Here is the article on the NVIDIA 8600 chip:
http://support.apple.com/kb/TS2377
Note that Apple will do the repair free of charge if the chip fails within the first two years of ownership. The repair will be to replace the logic board, as Apple does not work on boards at the component level. Your machine should be new enough to qualify for the free repair.
Good luck!

Question about MSI Z87 boards and NVMe PCI-E SSDs

With the release of the Intel SSD 750 PCI-E SSD and more NVMe SSDs no doubt to follow, will the older motherboards like the Z87 series get updates so that they can boot with NVMe SSDs?
All of the Z97 and X99 boards already have compatibility:
http://www.msi.com/news/1949.html
What about older chipsets like Z87, Z77? Z87 in particular is very similar to Z97, so I'd imagine it'd be the most likely candidate.

Yeah I did.
Quote from: jkinneberg on 13-May-15, 07:04:11
Did anyone get an answer from MSI.
MSI is there going to be a BIOS release to support the ability to boot off of nvme PCIe cards for the M87 boards?
MSI Tech. 05/14/2015 We unfortunately do not have any information regarding any future support for these series boards and supporting NVMe, you , you may continue to visit our news section for updates as they become available. http://us.msi.com/news/
I think is possible though - that and it's likely these boards may support Broadwell as well.

Question about moving system board from domain C to domain B SF2000

Hello,
i would like to move the system board e this is my configuration:
Domain A with Domain B Solaris 10 Sun cluster 3.2
Domain C Solaris 10 no Sun Cluster.
I move the sytem board SB7 from domain C to domain B with the command from System Controller:
# moveboard -d B -r 2 -t 900 SB7
This command can be done during normal operation and it's totally transparent to Sun Cluster domain A-B.
Thankls

The subject line of your post mentions a "SF2000".
Could you actually mean you have a Sunfire E20K ?
[http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/SunFireE20K_R/SunFireE20K_R]
If yes, then I suggest you contact your local Sun Support Center and open a proper support case.
Get assistance from engineers specifically available for such expensive systems.
This is just an anonymous user-to-user discussion forum.

Newbie, Questions about 865PE and DDR500 ram

I just purchased an MSI 865 PE Neo2 LS board, Kingston khx4000k2/512 PC4000 DDR500mhz kit, and a Pentium 4 3.0ghz 800 mhz frontside bus cpu. How do u set it up for dual channel, and what would your recommended bios and D.O.T. settings be for the ram and cpu. Basically if you had this setup, how would u set up the bios and D.O.T. for it to run as kick *ss as possible but running stable?

First of all; I have that same mem. in 1GB. Secondly, EVERY MO-BO, CPU, AND MEM. MODUALS do not react the same. So that said, I would START by installing the MEM. in sockets 1-A and 3-B, That will enable DUAL DDR recognition. Next go into the BIOS and set MEM TIMMINGS TO SPD (Serial Presence Detect). Then go to FREQ. and VOLTAGE page and SET PERFORMANCE to FAST, AND MEM SPEED to AUTO. Then (on same page) you should up the V-DIMM VOLTAGE to 2.7V. SAVE AND EXIT.. Then if you DON'Thave any problem with the POST, you can go back in and start to play with the TIMMINGS, PERF. MODE, RATIO, and (If you choose, OVERCLOCKING)...MY sys. is running stable with (TIME 2-3-3-7-8),(PERF. MODE TURBO), (RATIO 1:1), (FSB 220, MEM. SPEED=440), (V-DIMM V=2.7)...Keep in mind that I MEAN STABLE, I am sure I could go more,BUT WHY?..And as you can see I have the i875 and the P-4 3.2...Sean REILLY875

Question about the on board connector Line In / Microphone In / *Digital

My computer case with the front 2 audio ports has 3 different type connectors 2 that are for the motherboard (which i really dont want to use) and the third is all the different connectors seperate there is a GROUND / RET-R / R-OUT / MIC-IN / L-OUT / RET-L / MIV-VVC
i know these fit the flat 8 pin on the sound card but i really dont know what order they go in i've looked alot of places to see if it tells me even some sort of color coding would be nice.... if any knows a short reply would be awsome.

Here is the article on the NVIDIA 8600 chip:
http://support.apple.com/kb/TS2377
Note that Apple will do the repair free of charge if the chip fails within the first two years of ownership. The repair will be to replace the logic board, as Apple does not work on boards at the component level. Your machine should be new enough to qualify for the free repair.
Good luck!

Question about the Discussions Board

How come the icon "post new topic" appears for certain programs (FCP ect) but when I want to post a question under "I-Web" I do not get this option?
I know this has NOTHING to do with FCP.... Sorry!
Thanks!
G

EXACTLY!!
Be careful of different forums. They tend to do this. Make sure there isn't a 'list' of the forums on the top of all the threads. Usually those type of threads are a combination of posts added to the individual threads within.
For example: http://discussions.apple.com/category.jspa?categoryID=123
If'n you had clicked on FINAL CUT STUDIO instead of FINAL CUT PRO you would have gotten that.
Good luck!!
CaptM

Problem with quality and usage of 865PE Platinium motherboard?

:hypecrite:
hello everybody i just wanted to ask how to use The Core Center with my P4 865PE Platinium motherboard and wanted to ask about the fact of its quality as it does not have any warrenty as intel 865PE has of 3 years in Pakistan this motherboard was very expensive i need to know will this motherboard last 3 years with a stabilizer with daily power breakdowns if i might ask will it last longer then its intel competetor please help me out guys mail me at [email protected] ok
bye

Quote
Originally posted by midhat
hey guys,
i asked that what is the quality of 865PE Platinium board and will it stand power break downs with stabilizer , will it run 3 years or not i did not ask about overclocking my board i am not an overclocker, i just asked how do you control the corecell feature where do you control it ok
reply to me now and in a forward way read out my statement ok
mail me at [email protected]
Surely, you must understand that your question is impossible to answer, but anyway I can get you some opions about it.
MSI 865pe platinum are built of quality components and have passed several Q-controls before reaching the market for sale.
http://www.msi.com.tw/html/service/techexpress/mainboard/6728v20/page2.htm
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_detail.php?UID=556
Still there will never be a 100% guarantee, that some boards will have some faults
of some reasons and have to be RMA:ed.
Nearly all PC componenets are sensitive for elektromagnetic´s and electrical shocks, so be very careful when touching the motherboard and it´s components and see to it that you get yourself "statical unloaded" before touching anything.
and always unplug power cable when doing something inside the PC.
Second you have to get a high-quality PSU that has built-in power overload protection.
You can not protect yourself from power breakdowns, unless you get your own powerstation.
Anyway, my 865pe platinum have survived a couple of power breakdown´s.
But if it should be damaged because of heavy power overload / bad PSU I would not be too sure that it will be within the official guarantee anyway.

MSI 865PE Platinium edition board failure?

hello guys,
umm i recently upgraded my pc's powersupply unit and installed a new MSI NX6200 video card in my MSI 865PE Platinium edition board. well when we started the PC there was no signal display on the monitor and i failed to get the my pc started the power was on but nothing on screen, no beeps from the motherboard at all. The D brack on the back of the pc indicated memory failure so we took out the memory nothing no beeps i asked a computer seller guy to check it he said that the chips of the board are not getting hot but are cold so might be the board failure, i really don't know what to do, the warrenty is over as it was 1 year nearly and i don't get it the CPU did not fall or nothing only thing was i usually never cleaned my pc from inside so dust could be the reason or could voltage surge or something could have done some damage anyway my 130 $ board has failed from MSI gurentee tests or whatever . ;-((any suggestions ? guys

midhat, try go through this to find out what's wrong?
is there a buzzer/speaker on the board? If there is no, can you hook up one buzzer on your casing? After that, try this:
1. remove EVERYTHING, except CPU. No RAM, no display, no EVERYTHING ELSE. All OUT!
---> you should hear 3 long beeps. If no, you have pretty much a dead BIOS, or an unsupported CPU, or a dead CPU, or a dead board, or really bad PSU.
2. as (1), but add RAM.
--> you should hear 8 fast long-short beeps. If no, it could be half-defected RAM, bad chipset, bad board, or a bad PSU.
3. as (2), but add Display card,
--> you should see POST screen. If not, then bad display card, bad board or bad PSU.
4. as (3), but hook up the rests, one by one. Try to repeat power on again and see what's wrong.

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Some question about International Travel

Ok so i know alot of people have question about international travel weather is USA to Canada, Canada to USA or where ever.
So i just got off the phone with someone from AT&T these are my questions for them. i hope it can help, im confuse myself.
*1. I travel recently travel to canada a few weeks ago, when i cross the boarder i switch the data roaming ON and it picks up Rogers Wireless, a few days ago i try i again it said NO SERVICE is something wrong with my iPad?*
NO, consider yourself lucky u didnt get charge for that roaming, your ipad well not work out of the US unless u buy one of our International plans that AT&T has provided. The reason for this is so you wont have any unwanted charge or high charge on your bill.
*2. If i was to buy a sim card from Canada and pop it in to my US ipad well it work?*
Honestly that's something you can try at your own risk, it's design for AT&T so by switching sim cards it may affect your ipad such as running slow, virus, crash. You can try it, i dont work for Rogers so i know nothing about them, i work for AT&T so i can only tell you about our plans and i wont lie to you.(I THINK U JUST DID) This ipad is not unlock just like the iphone so it well only work with AT&T.
*3. If i pop my sim card out and put in an international sim card well it affect my plan at all or in any way?*
Yes it can, right now your on the unlimited plan if you put in a different sim card and then re-put in ur AT&T one chances are you're going to loose your unlimited plan and have to settle for the newer plan. That's why AT&T has reduce it's international plans so people are more likely to use it. It's a contract we sign with Apple, if u want to use in canada you can always buy an Ipad in canada and use their plan. (***)
At the end of this conversion i was just more angry with them. All in all she told bottom line is dont do anything stick with AT&T and pay for international plans. So i have to pay over price data plan if i want to use it intertanional? or i have to buy an ipad for each international places i go to?
Has anyone try or done any of the 3 ive mention and did it affect ur plan or ipad in anyway?
Thanks
Andy

Ok so here's a little more info
I called AT&T again today asking them the same question the guy was more helpful then the one yesterday. Even though he kinda told me the same saying that the ipad need to be unlock. , Afterward he transfer me someone from Apple. The lady told me
1. The ipad is UNLOCK so dont bother trying to get it unlock.
2. she doesnt see why sticking in another sim card from one of the apple ipad carrier is a problem. U would just have to sign up activated it like u would when u first got it.
3. Contact phone company (my case Rogers) to see if they carry the mico sim cards.
4. She doesnt see why it would affect the current plan u have now.
So at the end of all that she told me, seem like AT&T is just telling you, you cant do this or u shouldnt do that is simple THEY WANT YOU TO USE THEIR PLANS.
so with that i said i just want to let everyone know. I'm gonna go pick my Micro sim cards from Canada in a bit and sign up for thier plan we'll keep everyone updated if anything change or how it work

Question about 890GXM-GD65 ? any help..? tq

Dear people..
I have a question about this board MSI 890GXM-GD65, maybe somebody could help me with the answer...Do the board have an unlock cpu core bios like 785GM-E51 ...? thanx in advance..

Have a look: http://eu.msi.com/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=2012

Where to post question about backing up new G580 laptop

I'm new to Lenovo products and this forum and would like to know where I am to post a question about backing up a new G580 laptop.
I would appreciate any help.
Solved!
Go to Solution.

Hi kec234, welcome to the forum,
the best place would probably be in the Lenovo 3000 & Essential notebooks board; it's the correct board for your system and who knows after searching through it you may find an existing thread on the same subject??
Regards
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Post your questions about #BlackBerry10 here!

Hey everyone,
What a week last week! I think I'm finally starting to settle down after all the excitement with our global launch events last week.
If you're getting a BlackBerry 10 device soon, take a look at these tips on the BlackBerry Help Blog to help you set up your email, contacts, calendar and social networks: http://helpblog.blackberry.com/2013/01/blackberry-10-add-email-contacts/
Have other questions about BlackBerry 10? Our community can answer pretty much anything, just post your question below!
Remember, if you have a BlackBerry 10 device and need support, check out the BlackBerry 10 Support boards on the main page of the community.
^Bo
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Likes for those who have helped you.Click Accept as Solution for posts that have solved your issue(s)!

sanjithb wrote:
Why is the bis being stopped and not unlimited in south africa. Especially on the Z10.
the BIS is not stopped. BIS is still required for OS7 and previous.
the Z10 does not need a specific BIS plan, which is generally considered a very good improvement.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Question about 865PE Platinium board?

Similar Messages

Maybe you are looking for