Question about Acrobat free installation

I downloaded a free version of acrobat after having to reset my computer to factory settings, and I am getting a message that the Core DLL for the programs was not installed. Can you help me with this?
thanks much
Beckett

Usually this indicates a malware infection, which is strange since you just reset your computer...
Still: see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Similar Messages

Question about Windows repair installation

Hello,
I have searched through the forum, but am still a little confused as to the use of expert recovery mode on my Toshiba recovery CD.
I cannot boot Windows at all. I haven't backed up any of my data (foolish!).
I currently have a single partition.
Is it possible to create a second partition using expert recovery mode, and re-load Windows to that. Would this only format one partition, allowing me to subsequently retrieve files from the first partition?
Or will this format the whole drive, load Windows, and then create the partitions?
Any advice greatly appreciated.
Thanks,
Fitz.

Hello Fitz
Expert mode allows you to do two things:
1. Install OS on already persisting partition (if the HDD has already two of them)
2. Create own partition (in this case the whole content will be erased)
Please try to boot up using SAFE mode (press F60). If this doesnt help you can do the follow to save your data:
1. Connect the HDD to other PC as external device (using USB HDD box)
the HDD should be recognized automatically and you can copy all your data to other PC HDD
2. You can try to use Partition Magic tool. Start it using external FDD and create two partitions. After doing this start your notebook with start disk and try to copy all the data to second partition.
Detailed explanation about expert mode installation and how to create own partition you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518
If you have more question please write again!

Question about Photoshop Extended Installation

It seems that the Creative Cloud installer installs both the 32 and 64-bit versions of Photoshop. Can either one be installed singularly? Can one or the other be un-installed?

Hi RegalCreative,
I'm moving your question over to our installation forum.
For general Creative Cloud Membership questions, here is the FAQ link:
http://www.adobe.com/products/creativecloud/faq.html
-Dave

A few questions about Boot Camp: installation, performance, which Win OS?

Hello.
I am planning on getting a windows OS. My main motives for this are because I would like to get some PC only games (I've been eyeing that Fallout 3 Game of the Year Edition that is soon to come out) and because there is a good chance that I will need some PC only programs for my college work. I just had a few questions before I did anything. Note: I am running 10.5.8 now but getting 10.6 soon.
1. According to wikipedia: "Its functionality relies on BIOS emulation through EFI and a partition table information synchronization mechanism between GPT and MBR combined". The only word I understood of that sentence was "emulation." I know that emulation software significantly reduces performance. Is this true for boot camp? (say i were to get the exact same game for both mac and windows and set them to the exact same performance settings, when playing on windows, would there be more lag than on OS X?)
2. Which Windows OS should I get? Since I am just going to be using Boot Camp to run games and a few other programs, would XP be the best to get to optimize the application's performance (as opposed to Win 7)?
3. How complex is installation? I am a decent Mac techie, but this is my first time with boot camp, and I am a Windows noobie.
4. There seems to be a lot of talk about partitions. What exactly is a partition? I have some theories, but want to know for sure.
Message was edited by: Tomatoes&RadioWires

Hi,
check out the following link, excellent advice and performance tests on gaming.
cheers,
Dave
http://www.mactech.com/articles/mactech/Vol.25/25.04/VMBenchmarks/index.html

The question about the HA installation on ECC6.0

Hi Experts,
We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation.
In the guide document, I got the following steps to process for realizing the HA of ECC6.0:
1. Run SAPinst to install the central services instance (ASCS) using the virtual host name on the primary cluster node, host A.
2. Prepare the standby node, host B, making sure that it meets the hardware and software requirements and it has all the necessary file systems, mount points, and (if required) Network File System (NFS), as described in Preparing for Switchover .
3. Set up the user environment on the standby node, host B. For more information, see Creating Operating System Users and Groups Manually. Make sure thatyou use the same user and group IDs as on the primary node. Create the home directories of users and copy all files from the home directory of the primary node.
4. Configure the switchover software and test that switchover functions correctly.
5. Install the database instance on the primary node, host A.
6. Install the central instance with SAPinst on the primary node, host A.
7.If required, install additional dialog instances with SAPinst to replicate the SAP system services that are not a SPOF. These nodes do not need to be part of the cluster.
My Question is that does standby node(host B in above context) need to install the ASCS, database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when the primary cluster node (Host A in above context) totally crash, such as power failure.

Hi Rong,
I would try to explain it in simple words...
My Question is that does standby node(host B in above context) need to install the ASCS,
database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when
the primary cluster node (Host A in above context) totally crash, such as power failure.
1. You don't need to install ASCS on Node B. You are installing it using a VIRTUAL HOSTNAME which represent cluster not individual node. VIRTUAL HOSTNAME is assigned to cluster package, so whichever Node is the owner of the package, will have the VIRTUAL HOSTNAME. (it will switch with cluster switchover)
2. It is actually a cluster package configuration magic. When Node A is active, cluster package owner is Node A. So all mount points (which is on SAN disk) is mounted on Node A. When you switchover the cluster, those packages will be mounted on Node B.
Some time single cluster package is used (which includes mount points for SAP instance + Database directories). You can also use 2 cluster package seperating SAP and Database directory structure.
Only OS related directories should be on servers local disk. All other application related mount points should be on SAN disk which is configured in "Cluster Package". (For example /sapmnt, /usr/sap, /oracle etc.)
You only need identical users and their enviornment settings on both Nodes.
In simple words, When primary node fails or crashed only users and thier enviornment setting will be lost. On second node, because of identical users and their profiles, same settings will be available to bring up the SAP system. Your all SAP and Database data is intact as it is on SAN Disk.
I hope, your confusion is cleared now...
Regards.
Rajesh Narkhede

Question about use Windows Installer SDK

Hi,
I want to Use C# code to read .MSP file and get inside file list. Such as: you can get a hotfix from here
https://support.microsoft.com/en-us/kb/3000847 and after extract the exe you can get a .MSP file. And 3 DLL files are including in the .MSP file.
What I want is Use C# code to read the .MSP file and get the 3 DLL file name. Here is how to read it with C++:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa816375%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
But I don't konw about C++, So I'm trying use C# code to call Windows SDK. And I import the Windows SDK code into C# like below:
[DllImport("msi",
CharSet = CharSet.Auto)]
internal
static
extern
uint MsiGetPatchFileList(string
szProductCode, string szPatchList,
out
uint cFiles,
out
IntPtr phFileRecords);
My question is that: How to get the parameter information, such as
szProductCode. How to read the file information from phFileRecords in C# code?
Best regards,
Glen Qu (Fareast\v-zuqu)

Hi,
I want to Use C# code to read .MSP file and get inside file list. Such as: you can get a hotfix from here
https://support.microsoft.com/en-us/kb/3000847 and after extract the exe you can get a .MSP file. And 3 DLL files are including in the .MSP file.
What I want is Use C# code to read the .MSP file and get the 3 DLL file name. Here is how to read it with C++:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa816375%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
But I don't konw about C++, So I'm trying use C# code to call Windows SDK. And I import the Windows SDK code into C# like below:
[DllImport("msi",
CharSet = CharSet.Auto)]
internal
static
extern
uint MsiGetPatchFileList(string
szProductCode, string szPatchList,
out
uint cFiles,
out
IntPtr phFileRecords);
My question is that: How to get the parameter information, such as
szProductCode. How to read the file information from phFileRecords in C# code?
Best regards,
Glen Qu (Fareast\v-zuqu)
Hello,
For MSI APIs, you could refer to
Installer Function Reference
It has helped us separate them to multiple parts. Like for getting product code, we could refer to
Product Query Functions part, like the
MsiGetProductProperty .
For getting file information, then refer to File Query Functions
part.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Question About SAP Trail Installation 7.02

I have a question. if some could assist please. I wanted to learn the process of SAP installation(basis) and assigning users, roles...etc. I downloaded the Trial "SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Developer Edition", and successfully installed it on Windows XP platform. I was able to successfully log in trial SAP using the SAP GUI.
The issue is that when I compare the trail SAP 7.02 with our previous installed SAP(purchased license). I see that many modules are missing in the trial SAP version. e.g using transaction code "/nspro" & SAP Reference IMG. I don't see Financial accounting, controlling, investment management, enterprise controlling...etc etc and many many more.
Is there something that needs to be done in the SAP trial 7.02 installation that will activate the missing modules or how can I see the other modules or the trial version does not have these. Do I need to download any other file....Can someone please guide or provide any tips.

Hi,
The Developer Edition allows individuals free of charge to test, evaluate, prototype and share add-on software code on code exchange This package comes with SAP's robust ABAP server. It also includes Web Dynpro for ABAP.
Therefore, you will not find the other functionalities in this edition. It is only for developers to practice ABAP.
Regards,
Shitij

Question about bootable USB installer for Yosemite

After having wi-fi issues last month, I reinstalled Yosemite (clean install). I only mention that so that it is understood that I have a pretty good understanding of how this process works.
But I am old school and I like physical media for various reasons......not least of which would be in the event I ever have future problems getting online to obtain the download from the app store. So this evening, I decided to create a USB bootable installer for Yosemite. I used the following web site, which is quite thorough in explaining the process:
http://osxdaily.com/2014/10/16/make-os-x-yosemite-boot-install-drive/
I followed the instructions and successfully created my bootable media using a USB drive. But because I wanted to put this newly created bootable media to the test (without actually reinstalling anything), I just restarted the computer (command R) to ensure I could boot to the USB installer. I then clicked on disk utilities and noticed the following folders (and subfolders):
Macintosh HD
---Macintosh HD
31.95 GB PNY USB
--Install OS X Yosemite
disk 3
--OS X Install ESD
disk 4
--OS X Base System
Now for my question, does anyone know why I have these multiple folders on the USB drive? I can understand the first set (Macintosh HD and its subfolder) being my current OS X setup. And the second setup of folders (31.95 GB PNY USB --Install OS X Yosemite) being the actual USB installer. But what's up with those last two sets of folders called disk 3--OS X install ESD and disk 4--OX X Base System? Does anyone know? Perhaps one of those folder sets under disk 3 or disk 4 would be a hidden partition? But why both disk 3 and disk 4 folders?
I just want to make sure everything is correct here; and that I am good to go with the USB bootable media! I carefully followed the instructions using the above link to create this USB drive.

FYI
my process just completed: here is what I see when it is done... (the first you saw in my earlier post. It took about 15-20 minutes.
To continue we need to erase the disk at /Volumes/Recovery.
If you wish to continue type (Y) then press return: y
Erasing Disk: 0%... 10%... 20%... 30%...100%...
Copying installer files to disk...
Copy complete.
Making disk bootable...
Copying boot files...
Copy complete.
Done.

Question about Acrobat Distiller 6.0 ...

Is Acrobat Distiller 6.0 needed to run Adobe Reader XI free version upgrade or can I remove it ?

No, it is not needed. It is however both very useful and was (in its day) fairly expensive, so be wary of removing it.

Questions about acrobat sdk plugins...

Can a plugin developed for adobe acrobat professional 9.0 extended with acrobat 9 sdk, run in adobe acrobat professional 8.0, 7.0 or previous versions?
I try to do that, and a error ocurs.
And the other one, is not about the plugin itself, but about an option of acrobat professional 9.0 extended . It's possible to edit a pdf, add annotations.. with acrobat professional 9.0 extended when the pdf is open in a browser view?
I try, but the options to do that were not available like "advanced editing".
Thks,
César

No. You must use the version of the SDK for the LOWEST version of Acrobat you wish to support.
A plugin is not limited between browser and stand-alone - you can do the same things in both.

Question about Client Push Installation configuration

Hello,
I am trying to configure client push installation. Can you please tell me what is needed for the field "Network Share"? I see sample examples listing <server name>\admin$ or server\share. My admin share on my server
is c:\windows. Is there a directory that is needed here such as the client software? If so, I see a directory under C:\program files\Microsoft configuration manager\client. Please advise on the next step. Thanks for any help.

Are you talking about this?
This is optional. You don't need to use this at all. It's just to verify that the account details you have entered are valid (ie test connection).
Note that your client push installation account has to be local administrator on all devices on which you want to install a client.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Question about blazeds turnkey installation and directory structure

hi. this question is pretty basic...been reading sujit reddy g's blog on installing/setting up blazeds.
in one article he creates a samplewebapps directory in C:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\samplewebapps and copies the blazeds WEB-INF/lib into that directory and the configuration files in the flex folder across as well...http://sujitreddyg.wordpress.com/2009/04/07/setting-up-blazeds/
in another article on invoking java methods from flex he configures the remote-config.xml file directly in the blazeds\WEB-INF\flex folder....http://sujitreddyg.wordpress.com/2008/01/14/invoking-java-methods-from-adobe-flex/
wasn't sure why in the first example he copied the files and folders to the samplewebapps directory while in the second example he just configured the files within the blazeds directory...thanx...(i'm a newbie at server side development)

There's really not much difference. In some cases, you might already have a web application you are using so you could just copy the contents of the blazeds web app into your existing web application.
Application servers can host more than one web application and a Flex application that uses BlazeDS can be deployed on a different web app than the one where BlazeDS is running or a different server entirely so it really just depends how you want to set things up.
Hope I'm not just making things more confusing for you. . .
-Alex

Question about acrobat js

i want to know if exist a method in js that show me a dialog that allow me select a file to obtain information about this file selected.

Not really. You can use the importDataObject() to select a file and import
it as a data object, but it will not be the original file when you access
it. Or you can use app.openDoc(), but you need to know the path before-hand.

Question about Flash Player Installer

I downloaded the Adobe Flash Player installer on my Mac -- OS Mavericks. The installer will not accept my password to install the update. Gives the message "changed password" I went to Adobe and changed my password, but the installer still will not accept the password or begin the installation.

Hi Jean,
The password being requested is not your AdobeID password. This is your computer's password, what you use to log into your account. Please see What userid & password do I need to install Flash Player? for more information.
Maria

Question about Acrobat 8 Distiller

I am using a third party program and printing to the System Printer (Adobe PDF).
When printing to the Adobe Printer the computer gets held up and the error message states that the Acrobat Distiller has encountered problems.
Is there a fix or has this issue been approached before? I have always used this system and since installing Acrobat 8, I have encountered this problem.
Any suggestions will help.
Thanks,
Rhythm~

Thanks for your response.
I am using AA8.1
System Error Message is below:
Faulting application Acrodist.exe, version 8.1.3.187, faulting module AcroDistDLL.dll, version 8.1.3.187, fault address 0x0024332a.
Let me know if there is more that you need to know.
Rhythm~

Question about Acrobat free installation

Similar Messages

Maybe you are looking for