Question about adding a line/phone to a new plan

Hey everyone I have a concern I wanted to be clear about before I upgrade my plan. I am up for a device upgrade and plan on upgrading my smartphone and my current single line plan to one of of the new share everything family plans and a new smartphone. I can get the phone I want at a different store other then verizon for a better price so Im going to do that. After that is all said and done I plan on buying and adding another new smartphone/line to my share everything account through verizon(store or online). I just want to be sure that 1.) Adding another line after the fact isnt going to be a problem fee wise or the terms of my account wise since I just upgraded my account at a different vendor and 2.) Will that new line be still eligible for a upgrade discount through verizon just like a new plan would be even though Im not adding it at the same exact time I upgrade my main phone and plan?
Also I was wondering that if..say a few months from now I want to add another new phone/line to my share everything account. Will that also be like a new plan and eligible for a upgrade discount through verizon? My 2.) question will probably answer this but I want to be absolutely sure first before I do anything. Thanks alot guys. Appreciate any input.

scottm79 wrote:
Hey everyone I have a concern I wanted to be clear about before I upgrade my plan. I am up for a device upgrade and plan on upgrading my smartphone and my current single line plan to one of of the new share everything family plans and a new smartphone. I can get the phone I want at a different store other then verizon for a better price so Im going to do that. After that is all said and done I plan on buying and adding another new smartphone/line to my share everything account through verizon(store or online). I just want to be sure that 1.) Adding another line after the fact isnt going to be a problem fee wise or the terms of my account wise since I just upgraded my account at a different vendor and 2.) Will that new line be still eligible for a upgrade discount through verizon just like a new plan would be even though Im not adding it at the same exact time I upgrade my main phone and plan?
Also I was wondering that if..say a few months from now I want to add another new phone/line to my share everything account. Will that also be like a new plan and eligible for a upgrade discount through verizon? My 2.) question will probably answer this but I want to be absolutely sure first before I do anything. Thanks alot guys. Appreciate any input.
Every time you add a line, it is eligible for a subsidized phone. It does not matter when you do it. As far as question #1, your account is just what the terms of usage is, not the length of the contract(s). Those are determined by the individual lines. You can also change the account limits at any time (eg. increase shared data limit), but when you do, it is usually pro-rated for the remainder of your current billing month, plus 1 month in advance. It does not change any of the lengths of the lines contracts.
Does this help?

Similar Messages

Question About Adding Ram from other laptop to T-series Thinkpad

Hi,
I have a question about adding additional RAM. Right now I have a 4gb ram stick in the t510. I have an acer laptop which I do not need and there is a 4GB ram stick onboard (maybe two 2gb ram sticks) there in that older laptop. Would it be possible to add one stick of 2gb ram (or 4gb i need to check if it is 2 or 1) from the acer to the lenovo thinkpad making the total ram in the thinkpad over 4gb????
Thanks in advance

Hi Richk,
Yes, I am using a 64-bit operating system. I am running on windows 7. And as for reported incompatibilities....technically taking a RAM from another laptop and placing it in the laptop should be the same as purchasing a RAM card from ebay or something and putting into the laptop right?

Question about adding an index to a column and finding it back

Hi, How do I see in phpMyAdmin that an index is added to a column.(I'm talking about adding an index by clicking on the lightning bolt!) I know how to add an index and see a warning that it's added (only after I add it).
But where do I find it or a sign that it is added later on?!
Thanks!

You also may find better exposure for this question on the Dreamweaver Applications Development forum -
http://forums.adobe.com/community/dreamweaver/dreamweaver_development

Questions about adding files in LR3

I've been a happy LR user for years. I used the LR3 beta and liked it (especially the 2nd version) and generally I'm very happy with the release version of LR3. But I have some questions about the import process.
In LR2 I could edit off my Compact Flash cards (I know that's not smart, but sometimes on deadline fast is better than not smart) by adding the photos my library without moving them. That option is grayed out in LR3. Is there a way to turn it on or is this is a "new feature." If it's a permanent thing, maybe for 3.1 or the next incremental upgrade Adobe could make this possible with a popup (like we get when adding captions to multiple files) warning that editing photos on a CF (or SD) card is a bad idea. But let us make the decision.
jack

It's a deliberate change - time to adjust the workflow!
John

Another question about adding music to iPhone

Apologies for yet another question regarding adding music to an iPhone but I am completely stuck.
I bought a new laptop in January (it runs windows 8). I've authorised it and synced my phone to it before. I've used it to add music before.
Lately I've just been buying music directly from itunes on my phone but I wanted to add some music from my older collection that is on an external harddrive.
I've gone through the process of syncing the phone again, which has wiped whatever was on there. I made sure I'd ticked on the "manually manage music" box.
It's put all my purchased music back but it still will not let me drag and drop music from my external harddrive. When I hover over with the file it has "link" but it won't actually send the music to the phone.
Is there a way for me to do this without putting music on to my itunes library? I don't like itunes and I definitely don't want to add the music to my laptop as it defeats the purpose of having an external harddrive! Sorry for such a long-winded explanation.

Just to add... I've now tried adding music to the library (getting desperate here) and it's not letting me do that either. Just says 'link'.
This is the most frustrating thing ever. Why are the simplest of tasks made so difficult? It seems like it only works if you buy the music from the iTunes store.

Question about adding an Extra Node to SOFS cluster

Hi, I have a fully functioning SOFS cluster, with two nodes, it uses SAN FC storage, Not SAS JBODS. its running about 100VM's in production at the moment.
Both my nodes currently sit on one blade chassis, but for resiliency, I want to add another node from a blade chassis in our secondary onsite smaller DC.
I've done plenty of cluster node upgrades before on SQL and Hyper-V , but never with a SOFS cluster.
I have the third node fully prepaired, it can see the Disks the FC Luns, on the SAN (using powerpath, disk manager) and all the roles are installed.
so in theory I can just add this node in the cluster manager and it should all be good, my question is has anyone else done this, and is there anything else I should be aware of, and what's the best way to check the new node will function , and be able
to migrate the File role over without issues. I know I can run a validation when adding the node, I presume this is the best option ?
cannot find much information on the web about expanding a SOFS cluster.
any advice or information would be greatfully received !!
cheers
Mark

Hi Mark,
Sorry for the delay in reply.
As you said there is no much information which related to add a node to a SOFS cluster.
The only ones I could find is related to System Center (VMM):
How to Add a Node to a Scale-Out File Server in VMM
http://technet.microsoft.com/en-us/library/dn466530.aspx
However adding a node to SOFS cluster should be simple as you just prepared. You can have a try and see the result.
If you have any feedback on our support, please send to [email protected]

Question about adding Windows 2012 R2 Domain Controller, into a native Windows 2008 R2 single forest domain

I current have a two server domain, both Windows 2008 R2 and fully updated. The two servers are on subnet 10.0.1.0 /24
- Windows 2008 R2 Server A: 10.0.1.1 (DC, GC, FSMO, DNS)
- Windows 2008 R2 Server B: 10.0.1.2 (DC, GC)
AD Domain: COMPANY.LOCAL
I have a second connected subnet, 192.168.1.0 /24) which is routed to the 10.0.1.0/24 subnet and I would like to install a Windows 2012 R2 server onto a server on that subnet and make it a domain controller with AD-Integrated DNS and DHCP for the 192.168.1.0
/24 subnet.
- Windows 2012 R2 Server C: 192.168.1.1
What are the proper progression steps, in order to bring up the Windows 2012 R2 server and then add it to my COMPANY.LOCAL domain and then promote it do a DC/GC/AD-Integrated DNS server? Are they anything like the following:
1. Install Windows 2012 R2 server (Server C)
2. Point Windows 2012 R2 server DNS servers at Server's A and B
3. Perform AD prep to extend AD schema to support Windows 2012 R2 domain controllers
4. Promote Windows 2012 R2 server to domain controller (install local DNS service on Server C, during this step)
* Question: Will Windows automatically create a DNS zone for the Windows 2012 R2 subnet (192.168.1.0/24) AND also include the DNS zone from the previous Windows 2008 R2 domain (10.0.1.0 /24)? Or will I need to add the 10.0.1.0 /24 zone to the DNS
server on Server C, even though the DNS from the Windows 2008 R2 domain is AD integrated?

Hi,
Regarding the issue here, please take a look into below articles:
System Requirements and Installation Information for Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn303418.aspx
Release Notes: Important Issues in Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn387077.aspx
Install a Replica Windows Server 2012 Domain Controller in an Existing Domain (Level 200)
http://technet.microsoft.com/en-us/library/jj574134.aspx
Here is an example for promoting Windows Server 2012 to a DC, see:
Step-by-Step Guide for Setting Up A Windows Server 2012 Domain Controller
http://social.technet.microsoft.com/wiki/contents/articles/12370.step-by-step-guide-for-setting-up-a-windows-server-2012-domain-controller.aspx
As the server is promoted to a DC, DNS Zones will be replicated and synchronized to it automatically whenever the new one is added to an AD DS domain, bascially there is no special need to add zones, for more information, please see:
Understanding Active Directory Domain Services Integration
http://technet.microsoft.com/en-us/library/cc726034.aspx
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Question about DAQ PFI lines

Hi , I would like to use 6363 OEM PFI lines to countiously count the number of rising edges of a digital signal. My signal is connected to PFI2 line . I would also like to output a pulse to provide external clock for this signal
Here are the input output pins configuration. Could you please let me know which lines can I use for counter in and which lines for outputing a pulse. Can I also use PFI 2 for counter inpout?
thanks
CTR 0 SRC PFI 8
CTR 0 GATE PFI 9
CTR 0 AUX PFI 10
CTR 0 OUT PFI 12
CTR 0 A PFI 8
CTR 0 Z PFI 9
CTR 0 B PFI 10
CTR 1 SRC PFI 3
CTR 1 GATE PFI 4
CTR 1 AUX PFI 11
CTR 1 OUT PFI 13
CTR 1 A PFI 3
CTR 1 Z PFI 4
CTR 1 B PFI 11
CTR 2 SRC PFI 0
CTR 2 GATE PFI 1
CTR 2 AUX PFI 2
CTR 2 OUT PFI 14
CTR 2 A PFI 0
CTR 2 Z PFI 1
CTR 2 B PFI 2
CTR 3 SRC PFI 5
CTR 3 GATE PFI 6
CTR 3 AUX PFI 7
CTR 3 OUT PFI 15
CTR 3 A PFI 5
CTR 3 Z PFI 6
CTR 3 B PFI 7
FREQ OUT PFI 14

Hi,
the following information should answer your question:
X Series devices have up to 16 PFI lines. Each PFI can be individually configured as the following:
Static Digital Input
Static Digital Output
Timing Input Signal for AI, AO, DI, DO, or counter/timer functions
Timing Output Signal from AI, AO, DI, DO, or counter/timer functions
Each PFI can be individually configured as a static digital input or a static digital output. When a terminal is used as a static digital input or output, it is called P1.x or P2.x. On the I/O connector, each terminal is labeled PFI x/P1.x or PFI x/P2.x. The voltage input and output levels and the current drive levels of the PFI signals are listed in the specifications of your device.
Also, PFI can be configured to detect digital changes. The values on the PFI lines cannot be read in a hardware-timed task, but they can be used to fire the change detection event. For example, if you wanted to do change detection on eight timed DIO lines but wanted to ensure that the value of
the lines was updated every second independent of the eight lines changing you could set a PFI line up for change detection and connect a 1 Hz signal to it.
You can enable a programmable debouncing filter on each PFI, RTSI, PXI_STAR, or PXIe-DSTAR<A, B> signal. When the filters are enabled, your device samples the input on each rising edge of a filter clock. X Series devices use an onboard oscillator to generate the filter clock.
Regards,
Michael

Question about adding tags to images and music

Hi I have an artist page online and I have read that adding meta tags to your page does absolutely nothing to help search engines these days and then someone recommended adding tags to the images on my site using aperture (which I cant afford) so can anyone explain if I can do this in iphoto or photoshop? and also can I add tags to the mp3's available on my site to better perform in search engine searches? can i do this with itunes?
Thanks in advance

The search engines have to be lead to your music/photo page using an appropriate URL and having a text description with as many relevant "key" words as possible.
Also, you need as many links to this page as possible from other sites as well as your own pages.
When I enter one of my own song titles and name into Google, all the top listed links are sites that sell digital downloads and CDs. Have a look at the way these sites list your music to see the most effective way of doing it on your own website.
Obviously, you first have to add your URL to Google, Yahoo etc and get them to verify your sitemap.

Question about Adding External Storage/File Management

I am using LR5.2 on mid-2011 MBA. Before long I will run out of space on the HD. I have one catalog of about 16K photos. I would like to purchase external hard drive for additional storage. I use Time Machine for backup. What is the best way to manage the additional storage and keep the catalog intact?
1) I currently have photos organized by date? i.e., Pictures/2013/2013-10-10/ etc. Should I keep this file organization as it is and then when importing new photos, select 'copy' from SD card and select 'Location' as new external drive?
OR
2) Should I move all photos to new backup drive to keep all files stored together? Would this be better for long term file management?
Any recommendations for best practices? Or is there a better to organize photos for current and future use?
Also, does the catalog stay in the same location under either 1) or 2)
Thanks in advance

I would suggest creating a root folder on the EHD. You will need to keep your EHD connected when working with Lightroom. It will show up like your Mac HD with the green light in the left hand panel.
Leave everything where it is for the time being but you may want to drag older folders to the EHD over time, as importing new photos, generating previews and using the develop module will usually be faster on the main flash drive of the MBA.
Don’t use Finder to move files/folders around. Always use the Lightroom Library and the database of files and your develop settings (catalog) will not get corrupted.
See this video:
http://www.youtube.com/watch?v=4trWRAeOsuA

Question about adding keywords to a group of images in Aperture

Hi all,
Not sure what I am doing incorrectly, but I am unable to add a keyword to more than 1 image at a time, even though a group of images is selected. So, for example, in Browser view, with 4 images selected, using the keyword HUD, I drag a keyword to one of the selected images, and only the one dragged to gets that keyword, not the others in the group.
Any ideas?
Thanks
Aperture 3.1.1

Hi Pi,
Not quite sure what the purpose of that button is.
You'll laugh about this sometime not too long from now. Sometime, you will have a bunch of photos selected and *not want to change your selection*, but you'll notice that you need to add some metadata or adjust just 1 of those pictures. That's when you use the "primary only". When you find yourself in that situation, it'll be like a "eureka" since you're currently wondering what it's all about.
nathan

Question about adding multiple components....

.....HI, i really hope someone can help out......
When I try to add mutilple components to the panel, it won't show the components that I have added before again.....
For example, I have a Icon Label and I want it to show two of the same Label again in the panel.... but it won't... it will just show one of them....
for example:
Label[] dice = new Label[6]
Icon bug[] = new Icon[6];
String dicePics[] = {"1.jpg", "2.jpg","3.jpg",
"4.jpg","5.jpg","6.jpg",};
for(int i=0; i<6; i++){
bug[i] = new ImageIcon(dicePics);
dice[i] = new JLabel();
dice[i].setIcon( bug[i] );
userPanel.add(dice[0]);
userPanel.add(dice[0]);
This will only show dice[0] once in panel........ how can I show the same things over again in a panel more then once.........?? I also try it on other things... when adding a component with same name, it will just show one of them.......... wondering if someone can help me out.......

.....HI, i really hope someone can help out......
When I try to add mutilple components to the panel,
it won't show the components that I have added before
again.....
For example, I have a Icon Label and I want it to
show two of the same Label again in the panel.... but
it won't... it will just show one of them....
for example:
Label[] dice = new Label[6]
Icon bug[] = new Icon[6];
String dicePics[] = {"1.jpg", "2.jpg","3.jpg",
"4.jpg","5.jpg","6.jpg",};
for(int i=0; i<6; i++){
bug[i] = new ImageIcon(dicePics);
dice[i] = new JLabel();
dice[i].setIcon( bug[i] );
l.add(dice[0]);
userPanel.add(dice[0]);
This will only show dice[0] once in panel........ how
can I show the same things over again in a panel more
then once.........?? I also try it on other
things... when adding a component with same name, it
will just show one of them.......... wondering if
someone can help me out.......
You can't add the same GUI object to a Container multiple times. The problem is with your design. Consider something like this:
import java.awt.BorderLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.Random;
import javax.swing.Icon;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
public class DieLabelTest {
    private Random rand = new Random();
    private final JLabel[] dies = new JLabel[6];
    DieLabelTest() {
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel diePanel = new JPanel(new GridLayout(3,0,5,5));
        for (int i = 0; i < 6; i++) {
            dies[i] = new JLabel();
            dies.setIcon(DieIconProvider.getIcon(rand.nextInt(6) + 1));
diePanel.add(dies[i]);
f.add(diePanel, BorderLayout.CENTER);
JButton rollButton = new JButton("Roll");
rollButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
for (int i = 0; i < 6; i++) {
dies[i].setIcon(DieIconProvider.getIcon(rand.nextInt(6) + 1));
f.add(rollButton, BorderLayout.SOUTH);
f.pack();
f.setVisible(true);
public static void main(String[] args) {
new DieLabelTest();
class DieIconProvider {
private static Icon[] icons = new Icon[6];
public static synchronized Icon getIcon(int num) {
if (icons[num - 1] == null) {
icons[num - 1] = new ImageIcon(num + ".jpg");
return icons[num -1];

X-Raid question about adding more drives

Hi Guys.
I am running an X Server (10.3.8 dual 2GHZ PPC G5)with an X-Raid attached. Right now it is only half full with a RAID5 volume that is my main file server.
My question is can i add three 500GB drives into the empty slots of my X-Raid and congiure them as another RAID5 volume without killing my current drives setup on the X-Raid?
Thanks for any help.

You can do it hot. The 3 drives you insert will not affect the exiting RAID set in any way whatsoever. The Xserve RAID supports up to 3 RAID sets per RAID controller (each controller handles one "half" of the array -- so 7 drives). What you're doing is very common.
The only thing I say is that you need to be sure you replace the 3 unused "blanks" and don't accidentally eject one of the drives that's already part of a RAID set. This should be pretty obvious as the "live" drives have blue and green lights, and the blanks have none, but other than that, it's a cakewalk.

A question about adding record to DB

I tried to add a record to the DB of MSSQL2000. Then I set up a project of FLASH BULDER4.The application of server is COLD FUSION, using COLDFUSION FLASH REMOTING. Then I pulled a FORM to workspace, binded the DB and called the create service. But when I tried to add the record, there is no answer.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:valueObjects="valueObjects.*" xmlns:productsservice="services.productsservice.*">
<fx:Script>
<![CDATA[
   import mx.controls.Alert;
   protected function button_clickHandler(event:MouseEvent):void
    var products2:Products = new Products();
    products2.item_name = item_nameTextInput.text;
    products2.carpet_type = carpet_typeTextInput.text;
    createproductsResult.token = productsService.createproducts(products2);
]]>
</fx:Script>
<fx:Declarations>
<valueObjects:Products id="products"/>
<productsservice:ProductsService id="productsService" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
<s:CallResponder id="createproductsResult"/>
</fx:Declarations>
<mx:Form x="128" y="138" defaultButton="{button}">
<mx:FormItem label="Id">
   <s:TextInput id="idTextInput" text="{products.id}"/>
</mx:FormItem>
<mx:FormItem label="Item_name">
   <s:TextInput id="item_nameTextInput" text="{products.item_name}"/>
</mx:FormItem>
<mx:FormItem label="Carpet_type">
   <s:TextInput id="carpet_typeTextInput" text="{products.carpet_type}"/>
</mx:FormItem>
<s:Button label="Createproducts" id="button" click="button_clickHandler(event)"/>
<mx:Form>
   <mx:FormItem label="Createproducts">
    <s:TextInput id="createproductsTextInput" text="{createproductsResult.lastResult as Number}"/>
   </mx:FormItem>
</mx:Form>
</mx:Form>
</s:Application>

The source code for JDK1.4 is found in the src.zip file where you installed the JDK. Unzip the file and look at the code.
I would think the second approach is better. It ultimately uses:
JViewport.setView(ta);
which I belive is the correct way to add a component to a viewport. This way listeners can be added/removed correctly.
The JViewport.add(ta) is just using the Component add(..) method. Therefore, no special processing regarding listeners is done.

Question about Orange branded N95 phones

Can someone please tell me if it's possible to upgrade the firmware on Orange N95 phones using the Nokia software updater?
Do the software updates get released as often as the generic ones? Which is the latest orange version?
Many thanks for your help.
Solved!
Go to Solution.

15-Sep-2008 11:21 AM
richcowell wrote:
Fair enough, I stand corrected... has this always been the case? My brother and various other people I know have had phones from there on Orange none of which have been locked :-s
Also bear in mind that unlocked and unbranded are two totally independent things...
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Question about adding a line/phone to a new plan

Similar Messages

Maybe you are looking for