Question about adding an index to a column and finding it back

Hi, How do I see in phpMyAdmin that an index is added to a column.(I'm talking about adding an index by clicking on the lightning bolt!) I know how to add an index and see a warning that it's added (only after I add it).
But where do I find it or a sign that it is added later on?!
Thanks!

You also may find better exposure for this question on the Dreamweaver Applications Development forum -
http://forums.adobe.com/community/dreamweaver/dreamweaver_development

Similar Messages

  • Question About Adding Ram from other laptop to T-series Thinkpad

    Hi,
    I have a question about adding additional RAM. Right now I have a 4gb ram stick in the t510. I have an acer laptop which I do not need and there is a 4GB ram stick onboard (maybe two 2gb ram sticks) there in that older laptop. Would it be possible to add one stick of 2gb ram (or 4gb i need to check if it is 2 or 1) from the acer to the lenovo thinkpad making the total ram in the thinkpad over 4gb????
    Thanks in advance

    Hi Richk,
    Yes, I am using a 64-bit operating system. I am running on windows 7. And as for reported incompatibilities....technically taking a RAM from another laptop and placing it in the laptop should be the same as purchasing a RAM card from ebay or something and putting into the laptop right?

  • Some question about fade in // fade out by hideEffect and showEffect in Actionscript

    Some question about fade in // fade out by hideEffect and
    showEffect in Actionscript
    Please kindly take a look at the following page:
    http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
    (can view source)
    I tried to make an image preloaded and scale the image to
    it's preferred size.
    When I came to consolidate the stuff into a component, I
    found the application goes weird as I implementation the show/hide
    effect.
    The third trial which just hide and show the images directly,
    instead of using viewstack, fail to bring the second image onto
    screen.
    It just used fadeOut instead of fadeIn(you see there is a
    flash of the second image)
    After some study of showEffect and hideEffect behaviour,
    seems the mechanism of hide/show a component works in this way:
    this._fadeIn:Fade = new Fade();
    this._fadeIn.alphaFrom = 0;
    this._fadeIn.alphaTo = 1;
    this._fadeIn.duration = 1000;
    this._fadeOut:Fade = new Fade();
    this._fadeOut.alphaFrom = 1;
    this._fadeOut.alphaTo = 0;
    this._fadeOut.duration = 1000;
    Component_A.visible = true;
    Component_A.setStyle("showEffect", this._fadeIn);
    Component_A.setStyle("hideEffect", this._fadeOut);
    then when I set Component_A.visible = false, the sequence
    works like following:
    Component_A.visible = true
    Component_A.visible = true, alpha = 100;
    Component_A.visible = true, alpha = 50;
    Component_A.visible = true, alpha = 0;
    Component_A.visible = false;
    The above sequence works visa versa as:
    Component_A.visible = false;
    Component_A.visible = true, alpha = 0;
    Component_A.visible = true, alpha = 50;
    Component_A.visible = true, alpha = 100;
    Component_A.visible = true;
    (Correct me if i am wrong)
    ========================================================================================== ====
    From what I observe from the application, I have two
    question.
    1) When more than one component using the this._fadeIn,
    this_fadeOut as the hide/show effects, the component in instance of
    this._fadeIn? will it mess out if more than one component using the
    fadeIn instance in the same time?
    2) from the third component, i.e. PictureHolder3, when I load
    other the picture , it fade out the new image instead of fading
    in... Seems there is problem if I hide show too frequent. I think
    when I hide then show right the way, the component only do the hide
    part...
    Can someone pls look into it and tell me what I did wrong?
    Cuz in normal practice I don't think appropriate to use ViewStack
    in Actionscript...

    Hello Jack,
    Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
    Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
    1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
    2. http://www.youtube.com/watch?v=5in4swnIFsw
    3. http://www.youtube.com/watch?v=KnBFLQheOk4
    Hope this helps.
    Cheers
    Parikshit

  • Question about the partition index

    Hi, all, I have some questions about partitioned index.
    And I get from oracle documents that oracle's partition index can be clarified as local partition index and global partition index.
    And local partition index can be clarified as prefix local partition index and non-prefix local partition index. And I also the word "global prefix partition index".
    But, I can not get what the exact meaning after I consulted many documents and notes from website.
    Can anyone give me one example to cover these topic?
    You help is very thankful!
    Thanks and best regards!

    Hi,
    Local index search by partition.
    Local Indexes: A local index is an index on a partitioned table which is partitioned in the exact same manner as the underlying partitioned table. Each partition of a local index corresponds to one and only one partition of the underlying table.
    Global Partitioned Indexes: A global partitioned index is an index on a partitioned or non-partitioned table which is partitioned using a different partitioning-key from the table. Global-partitioned indexes can only be partitioned using range partitioning. For example, a table could be range-partitioned by month and have twelve partitions, while an index on that table could be range-partitioned using a different partitioning key and have a different number of partitions.
    Global Non-Partitioned Indexes: A global non-partitioned index is essentially identical to an index on a non-partitioned table. The index structure is not partitioned.
    Maybe this links help you:
    http://www.oracle.com/technology/products/oracle9i/datasheets/partitioning.html
    http://asktom.oracle.com/pls/ask/f?p=4950:8:12026637104196321871::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:678824574412
    http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:1612281449571
    Cheers

  • Questions about adding files in LR3

    I've been a happy LR user for years. I used the LR3 beta and liked it (especially the 2nd version) and generally I'm very happy with the release version of LR3. But I have some questions about the import process.
    In LR2 I could edit off my Compact Flash cards (I know that's not smart, but sometimes on deadline fast is better than not smart) by adding the photos my library without moving them. That option is grayed out in LR3. Is there a way to turn it on or is this is a "new feature." If it's a permanent thing, maybe for 3.1 or the next incremental upgrade Adobe could make this possible with a popup (like we get when adding captions to multiple files) warning that editing photos on a CF (or SD) card is a bad idea. But let us make the decision.
    jack

    It's a deliberate change - time to adjust the workflow!
    John

  • Another question about adding music to iPhone

    Apologies for yet another question regarding adding music to an iPhone but I am completely stuck.
    I bought a new laptop in January (it runs windows 8). I've authorised it and synced my phone to it before. I've used it to add music before.
    Lately I've just been buying music directly from itunes on my phone but I wanted to add some music from my older collection that is on an external harddrive.
    I've gone through the process of syncing the phone again, which has wiped whatever was on there. I made sure I'd ticked on the "manually manage music" box. 
    It's put all my purchased music back but it still will not let me drag and drop music from my external harddrive. When I hover over with the file it has "link" but it won't actually send the music to the phone.
    Is there a way for me to do this without putting music on to my itunes library? I don't like itunes and I definitely don't want to add the music to my laptop as it defeats the purpose of having an external harddrive! Sorry for such a long-winded explanation.

    Just to add... I've now tried adding music to the library (getting desperate here) and it's not letting me do that either. Just says 'link'.
    This is the most frustrating thing ever. Why are the simplest of tasks made so difficult? It seems like it only works if you buy the music from the iTunes store.

  • A simple question about wrong sorting with multiple sort columns in Excel 2010

    Hi, everyone! I have encountered a problem that I don't know how to explain.
    So I post it here because I don't know if there is another more relevant forum...
    I have a data sheet with the students' scores for the course. 
    All the data were generated with the randbetween function,
    and pasted with the values.
    To rank the students by their performance,
    I did the sort with the column "total score" as the first sort-column
    and "final term" as the second.
    The weird thing to me is that the order of the data seems problematic.
    That is, all the rows are sorted correctly with the first sort-column.
    But for the rows with the same values of the first sort-column,
    there are some rows whose values of the second sort-column are out of order.
    (please look at the data file at
    www_dot_kuaipan_dot_cn/file/id_67204268108546068_dot_htm
    Please change the "_dot_" to the real literal dot.
    Especially the rows with 56.7 as the first sort-column value
    and some other values near the tail of the list.)
    I tried to manually input and sort the same values of both columns
    in a near-by region. The result was correct.
    When some friend copied all the data to paste in Notepad,
    and reload them in excel. The problem disappears.
    Some friend also tried to wrap a round function at the values of the 1st sort-column,
    the sorting order became correct!
    But they could not explain why either.
    How confusing! I even tried to swap the first and secod sort-column;
    the output was right.
    All the data were generated by randbetween function and pasted with values.
    Where could all the special characters, if any, come?
    Can anyone give me an explanation? I would be very grateful.
    Thanks in advance!

    Re:  Sort is not in proper order
    Sounds as if the data includes spaces or hidden characters that are affecting the sort.
    That is indicated by the fact that manually entering the data resolves the problem.
    Note:  You can use a public file storage website to hold your file and add the link to it in your post.
    Jim Cone
    Portland, Oregon USA
    Special Sort excel add-in (30+ ways to sort) - 3 week no obligation trial
    https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

  • When i changed the names of my books in iTunes, it did not changed in the iPad after i had synced it again with the changes. can anyone help? i had added authors to the author column and deleted their names from the book titles.

    i had added books to iBooks on iTunes and synced with my iPad mini. Then I realised that the titles sometimes had the author name, or a random number before it. I made changes to all the books in my iTunes library, edited the titles, added authors to the author columns, year in year column etc and synced my iPad again. but my iPad did not update these changes at all is still in the old way. can this be rectified?

    Have you tried closing the iTunes store app via the multitasking bar and seeing if it works when you re-open it
    Have you tried closing the app via the taskbar ? (I assume that your iPad is on iOS 6, though the version that your tagline shows, 6.1.6, is not a version for iPads) From the home screen (i.e. not with iTunes store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have index with 3 column and i want continued word at top of every column, if term not completed at the end

    I have 3 column index.
    Every column have main term, now i want if the main term of subterm not ending the last column then main term and continued word appear at top of every column.
    Please help me

    That // interesting question:
    How not to separate two consecutive paragraphs [2 different levels] in an index? Especially, at the bottom of a column. 

  • Question about MSN on my new DC G5 and about Burning on Itunes

    Hey guys I have a question about ripping music to itunes, I have a Dual Core 2.0 and was wondering if it was normal that my ripping speed is round 14.5 one some cd's and on other cds 27.5 lol i have ripping to maximum, but the weirdest thing is that if i burn data to a CD, it does it faster than ever, compared to my old comp, but my old comp use to rip I tunes some times faster.
    how cna i check if my super drive is working fine or is this pretty normal? like DVD's work fast on the comp, and stuff installs pretty fast? so i dont think its a reading problem, and ive done hardware tset and eveyrthing passed
    Secondly, my Gf also has a mac and i think she has the smae problem or at least she says she does, and that is when running MSN Messenger i get signed off alot, saying that my network connection has been lost when i run Safari all the time on it, and works perfectly and FAST. is it just that MSN messenger has bugs with mac ? ive heard bout some bugs just dont know if this is one of them

    Make sure you have your CPU speed set to highest. Ripping the CD will depend on CPU and condition of the originial disk. Old disks may take longer.
    As for MSN? If only you and your GF are the users of MSN you might be better switching to AIM or iChat. Here's a review of different IM applications...
    http://www.macworld.com/2005/04/reviews/imsoftware/index.php
    iMAC G5 1.8 GHz w/20 Display and PowerBook G4 1.67 15   Mac OS X (10.4)   Quad G5 w/7800GT on order

  • Question about get web service result in actionscript and convert data format

    Hi, All
    I have question about how to get dataset from web services
    and put it in tree structure. I have 2 questions about this:
    1, How can I get data correctly in actionscript?
    I have no problem to get data by
    <mx:ArrayCollection id="acFolder"
    source="{mx.utils.ArrayUtil.toArray(MyGServices.getFolder.lastResult)}"
    />
    And display in datagrid.
    But when I try to use
    public function
    handleFolderContents(event:mx.rpc.events.ResultEvent):void{
    arData=mx.utils.ArrayUtil.toArray(event.result);
    acData=new ArrayCollection(arData);
    input.text=acData.getItemAt(0).id;
    Seems I can’t get data, it always say:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    2, how to convert data format
    I get data from web service and want to convert it to tree
    structure, as mention below:
    I get:
    <Array>
    <id>111</id>
    <Name>Production1</Name>
    </Array>
    <Array>
    <id>222</id>
    <Name>Production2</Name>
    </Array>
    Convert to:
    <mx:XMLList id="treeData">
    <node>
    <node label="Production1" data="111">
    <node label="Production2" data="222"/>
    </node>
    </node>
    </mx:XMLList>
    Please help me.
    Thanks.

    First, don't specify the package path in the argument
    declaration. Instead import the event object:
    import mx.rpc.events.ResultEvent;
    The docs state this emphatically.
    Second, try "lastResult", in place of "result":
    arData=mx.utils.ArrayUtil.toArray(event.lastResult); // I am
    not positive about this. I maybe recall reading that result was ok
    for the event object, but maybe not.
    Finally, why do you want to convert the xml? You certainly
    could, but it would be a manual process, recursively reading the
    existing xml nodes and building the new structure, but again, why?
    Just use a labelFunction if necessary to display the nodes as
    you wish.
    Tracy

  • 4 questions about the the top boxes - SD box and Home media DVR

    Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
    1) Do these boxes have timers on them to set so the box can turn off at a certain time?
    2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
    3) How many people can access the home media dvr at the same time to watch already recorded programs
    4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
    Thanks for any help.

    I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
    This has worked flawlessliy for the last year -- ON THE Standard STB's.
    I just ordered the Home Media DVR STB to replace one of my Standardt STB..
    On the Home Media DVR:
    I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when  tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
    Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
    If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
    I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
    Has anyone else had the same problem? Here's how to test your Home Media DVR:
    1. Menu-Settings-Parental Controls.
    2. You will be prompted to CREATE youre Parental Controls PIN
    3. Enter you PIN twice.
    4. Use the > button to scroll to Enable On/Off and set it on.
    5. scroll down to Control Channels
    6. Press > button to See Locked Channels
    7. Scroll down to Add/Remove Channels
    8. Scroll right to choose LOCK ALL
    9. Press OK and then scroll to YES to lock all channels
    10. Press EXIT to get out of settings.
    11. All channels are now locked.
    12. Go to any channel
    13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
    14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
    15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR,  but nothng happens.
    If you have a Home Media DVR, can you please try this and see if it works?
    Thanks,
    John

  • ANOTHER Question about my iMac G3. Mac OS X and RAM

    Hey, I have ANOTHER question about my iMac G3.
    I know that I'm supposed to have the latest firmware updates for my iMac G3 running OS 8.1, which I do, but I read some where these firmware updates could only be updated if you're running OS 9.2. Yet when I run the firmware updater, it says my firmware is up to date. I just wanted to make sure this was correct because I just ordered an OS X 10.2 CD today, and I don't want my mac to be "dead" when I install it.
    My next question is how much RAM can my mac hold. It's an iMac G3 with a 233 mhz processor, if that makes a differemce.
    Again, thanks to the people who have helped me with my first Mac.

    hi there--
    unfortunately you require system 9.1 or 9.2 for the required firmware update 1.2 for your computer http://docs.info.apple.com/article.html?artnum=86117. so you'll have to install that if you want to install 10.2. it may work for you for a little while, but then you could possibly lose all your information. so i wouldn't advise attempting installing 10.2 without the correct firmware. [ : ) ]

  • Some questions about creating web animations with lighter data and exporting to vector Flash format.

    Hi, I will be creating animations in After Effects mostly using Illustrator vector files and will be exporting to SWF or XFL for using the animations on the web.
    One of the priorities is light data as possible to provide viewers with slower connections with better experience. However the animation should also impress and I need to find a balance between performance and possible imagery.  The animations may have sound and voice narrative.
    I need help with understanding which type of non-vector data is heavier than others. Non-vector image data or sound and voice? And from non-vector image data is some of it lighter or heavier than other - for example motion blur vs smooth gradient vs many colors?
    I would greatly appreciate any suggestions, tips, pointers, etc.,

    Hi, I will be creating animations in After Effects mostly using Illustrator vector files and will be exporting to SWF or XFL for using the animations on the web.
    One of the priorities is light data as possible to provide viewers with slower connections with better experience. However the animation should also impress and I need to find a balance between performance and possible imagery.  The animations may have sound and voice narrative.
    I need help with understanding which type of non-vector data is heavier than others. Non-vector image data or sound and voice? And from non-vector image data is some of it lighter or heavier than other - for example motion blur vs smooth gradient vs many colors?
    Let's do a little "Myth Busters" on that one, shall we?
    Vector data is per se not "lighter" than pixel data. You could have complex paths for which storing the information of the individual nodes takes up more space than a pixel image of the object.
    Dynamic rasterization of vector data costs CPU performance and may in effect make things more slow than just playing a series of pixel images. That would apply to anything from path strokes to gradients.
    All your pretty AI vectors don't mean anything if they are constructed in such a way that either AE or Flash need to rasterize them on import. Anything from converting Bezier paths to paths consisting of dense linear segments to converting fills, patterns, gradient meshes and so on to pixel data
    Pixels are pixels. It does not matter whether they are gradients, mothionblur or just non-antialiased shapes. Flash doesn't care and neither image format that may be used in Flash stores any more or less info. They only differ in their methods, but in the end it's for you to decide whether you use JPEG, PNG8 or PNG24. They all have their pros and cons.
    It makes a difference, if data is embedded in an SWF or if it is externally linked just as it makes a difference whether you enforce audio sync or not, playing every frame or not.
    So for all intends and purposes, it's still up to you to make up your own mind and find the best solution. And Rick has a point - if you're really that concerned about efficiency, then do it in Flash or Flash Catalyst and consider the options there that may help like GPU accelerated layer styles for drop shadows etc., dynamic text or your vector data remaining vector in teh first place.
    Mylenium

  • Question about adding an Extra Node to SOFS cluster

    Hi, I have a fully functioning SOFS cluster, with two nodes, it uses SAN FC storage, Not SAS JBODS. its running about 100VM's in production at the moment.
    Both my nodes currently sit on one blade chassis, but for resiliency, I want to add another node from a blade chassis in our secondary onsite smaller DC.
    I've done plenty of cluster node upgrades before on SQL and Hyper-V , but never with a SOFS cluster. 
    I have the third node fully prepaired, it can see the Disks the FC Luns, on the SAN (using powerpath, disk manager) and all the roles are installed.
    so in theory I can just add this node in the cluster manager and it should all be good, my question is has anyone else done this, and is there anything else I should be aware of, and what's the best way to check the new node will function , and be able
    to migrate the File role over without issues. I know I can run a validation when adding the node, I presume this is the best option ?
    cannot find much information on the web about expanding a SOFS cluster.
    any advice or information would be greatfully received !!
    cheers
    Mark

    Hi Mark,
    Sorry for the delay in reply.
    As you said there is no much information which related to add a node to a SOFS cluster.
    The only ones I could find is related to System Center (VMM):
    How to Add a Node to a Scale-Out File Server in VMM
    http://technet.microsoft.com/en-us/library/dn466530.aspx
    However adding a node to SOFS cluster should be simple as you just prepared. You can have a try and see the result. 
    If you have any feedback on our support, please send to [email protected]

Maybe you are looking for