Question about AHCI and TRIM support in NF980a-GD65

Is it available through the chipset?  I have a 780i motherboard and it's not supported on there.  I'm deciding between NF980a-GD65 and 890FXA-GD65 for my Phenom II X6.  The only reason I ask is that I'm planning to use a SSD.  I would like to have the full ACHI and TRIM support.

TRIM is a feature of the operating system and the drive itself, not the chipset.
See:
http://en.wikipedia.org/wiki/TRIM
http://www.bit-tech.net/hardware/storage/2010/02/04/windows-7-ssd-performance-and-trim/1

Similar Messages

  • A question about grub and USB

    Hi All
    I have a quick question about grub and USB that I can't quite find the answer to by searching.   Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this.  I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife).  I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR.  So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick?  My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive. 
    Thanks
    Kev

    i cant say for hp's
    havent worked on any in a while
    recent machines have been coupleof dell's , vaio & emachine
    which dells do offer it at least the ones i tried , my laptop does(dell)
    all home pc's are built by me which do offer to boot individual drives
    what hp you getting it may tell in specs
    are both discs sata? if so it might not offer this option with 2 drives of same interface
    check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
    & will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
    i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
    i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
    if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
    i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
    for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
    i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
    you may want to consider this in your next venture for pc

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • A few questions about MacBooks and Parallels Desktop.

    I have a few questions about MacBooks and Parallels Desktop.
    1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
    2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
    3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
    Thanks
    Keith

    1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
    2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
    Remember to leave at least 2 or 3 Gb for virtual memory usage.
    3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
    Good Luck

  • One question about Pricing and Conditions puzzle me for a long time!

    One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
    1-First,my sale order use pricing procedure RVAA01.
    2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
    3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
    4-Next,the Access Sequences PR00 have some Condition tables,such as:
         table 118 : "Empties" Prices (Material-Dependent)
         table 5 : Customer/Material
         table 6 : Price List Type/Currency/Material
         table 4 : Material
    5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
    A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
    B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
    Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can  explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

    Hi,
    You said that you are using the T.codes VK31 or VK32.
    These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
    Pl check using T.code VK11 OR VK12 (change mode)
    Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
    After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
    You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
    You can give all the required values and save the conditon record.
    Hope this is clear.
    REWARD IF HELPFUL.
    Regards,
    praveen

  • 2 question about GPU and Lens correction ,cs5

    Hi
    i have 2 questions about Gpu and lens correction in Cs5
    1)Filter->lens correction->search online
    i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
    is it normal?
    2) question is about Gpu
    it run faster , but talking about ajustament layer
    like saturation or vibrance for example
    i found with the gpu on , a light slow refresh compared with gpu off
    i have set cache  levels 6 ,history 20
    i guess are the defaul
    well i add a saturation layer and move the saturation slide ,increase o decrease saturation
    with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
    with Gpu On it takes a few(very few) time more
    again is normal ?
    don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
    thanks

    For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay.  Second click turns up results immediately.  This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions.  Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
    I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key.  Strange.
    Windows 7 x64.
    -Noel

  • Three questions about Java and Ftp

    Hello, i've the following questions about Java and Ftp:
    1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");
    2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
    3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
    Thanks in advanced!!!
    Kike

    1- .netrc file is in $HOME directory but i can't
    access to this directory from java code. The
    following line producesan Exception (directory
    doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
    think you can use it as part of a legal path.
    Instead, use System.getProperty("user.home");
    Ok, thanks
    2- .netrc file must have the followingpermissions:
    -rw- --- --- but when i create the .netrc file the
    following permissions are on default: -rw- r--r--,
    how can i change this permissions? (In java code,i
    can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
    I need to use estrictly the .netrc with -rw- --- --- permissions
    Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
    3- Are there any way to pass parameters to a.netrc
    file? If i get to do this i needn't change the
    permissions because i can't modify orcreate/destroy
    this file.I don't think so. Why do you need the .netrc file in
    Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
    - modify .netrc (for me is the complex option)
    - destroy and create a new .netrc (is easier but i have permissions problem)
    - use .netrc with parameters but i haven't found any help about it
    Thanks for your prompt reply!!!!
    Kike

  • Basic question about storage and safety in iMovie '11

    A very basic question about storage and safety:
    I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
    1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
    2. Duplicate that footage/clips.
    3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
    4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
    5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
    6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
    I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
    QUESTION:
    Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
    *Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
    In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
    This time around with iMovie '11 I don't to make such novice, ignorant errors.
    Thanks so much for any comments to this question.
    -L

    Yes I'm sure it will work great for you.
    The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
    iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
    iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
    Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

  • Question about RAC and ASM

    Hi,
    We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
    1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
    2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
    3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
    4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
    5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
    I'm a newbie to RAC and ASM..
    Thanks,

    user4866039 wrote:
    1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
    2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
    3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
    4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
    5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
    Bjoern

  • MacBookPro3.1 SSD and TRIM support?

    Hi,
    I recently replaced my HDD with an Intel X25-M (G2) 160Gb SSD drive and the mac is now _really_ fast. What I can tell from searching the net, is that the OSX operating system I'm using (10.6.4) is not yet supporting the TRIM feature of the disc. Eventually, the SSD could become slower...
    Is there any information available to shed som light on this matter, such as:
    a) will it be supported by Apple OSX in near future?
    b) will I have to bother about it?
    c) what else do I need to do in order to keep my SSD happy and fast?
    Windows 7 do support TRIM and Intel provides the necessary (ToolBox) utility for Windows OS versions, but not for OSX.
    Anyone?
    Thanks in advance,
    /Peter

    I've done quite a bit of research on this subject and here's what I have come up with.
    Based on anandtech's knowledge and reports, all of the Apple sold SSDs are OEM drives from either Samsung or Toshiba, and they all run custom firmware
    source: http://www.anandtech.com/show/3991/apples-2010-macbook-air-11-13inch-reviewed/4
    I would say that this is what's going on:
    1.) Apple's SSDs run their own custom firmware and take care of drive degredation in a custom, non-industry standard way (aka TRIM) -- what a surprise, just like everything else Apple does.
    2.) Apple has done this on purpose so they can make money selling SSDs for more than a standard (non Apple OEM) SSD would cost you.
    3.) Apple will never implement TRIM; they want you to buy their drives with their firmware, which by all accounts, do not need TRIM and do not suffer from poor performance after extended usage.
    Consider the facts -- Windows 7, Linux, BSD, [insert every other os in the world here] has supported TRIM for over a year now. It's not hard to implement; maybe 20 lines of code at the most? All it does is pass an ATA command from the SATA controller to the disk at the right times.
    If you want to use a non Apple OEM SSD, I would say there's a more than likely chance it will become slower after 5-6 months of usage...Depending on the level of degredation, class of drive, how much free space is left on the drive, it could be noticeable.
    Some users have reported using non Apple OEM SSDs successfully on OS X, and some have run into problems.
    A few notes:
    1.) A degraded drive can be reset to factory condition by using a secure erase program. You would have to back your data up, secure erase the drive, then do a restore. Secure erase of an SSD takes about 1 minute, plus the time to backup and restore depends on what kind of storage you're backing it up to \ restoring it from. This is more or less a band-aid solution for using an SSD on an OS that has no TRIM support, and should really only be done if you are experiencing problems.
    2.) SLC drives are a LOT less susceptible to degredation than MLC drives. Intel still has not implemented TRIM support for the X25-e series drives...some people say that SLC drives still need TRIM, but in my experience (I've been using the SLC Intel x25-e drives for over a year and a half now), they don't. They're a lot more expensive though..by a huge margin.
    3.) The less free space an SSD has, the more chance it has at becoming degraded. The obvious solution here is to store media and larger files on a NAS, and then keep only important applications and the OS on the SSD.
    I hope this has helped answer some of your questions.
    One more thing, according to Anand, the Kingston’s SSDNow V+ Series and the SSDNow V Series work very well on OS's without TRIM support (OS X). If I were you, I'd go with that over the Intel drive. I've never used a Gen-2 X25-M, only the Gen-1 (abandoned and discontinued by Intel, replaced with Gen-2, never had TRIM implemented and never will); and on Windows XP, I experienced stutters and slowdowns after 6 months. I used the "band-aid" solution to get the drive back to health, and then I got rid of it and picked up the 64GB V series (http://www.newegg.com/Product/Product.aspx?Item=N82E16820139132) -- unfortunately, that was around the time I switched to Windows 7, and I've never used the drive on OS X, so I can't confirm what Anand is saying; but I would take his word for it.
    Since you already have the X25-M, I would keep an eye on things -- if it gets slow, back it up, do a secure erase (there's tons of programs out there, hdparm on linux is probably my favorite and the easiest to use), then a restore. Should give you another 5-6 months until you start experiencing problems again.

  • Just installed iOS6, questions about "iMessage" and other things...

    I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
    First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
    In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
    Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
    I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
    Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
    Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
    Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
    Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
    Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
    Finally, what is the Notification Center used for?
    If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
    There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

    Hey Taantumus!
    Here is an article that will provide some guidance on this question:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Follow-up question about forms and SharePoint Online

    I asked a question about life after InfoPath earlier, and got a good answer:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
    After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
    displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
    pages and workflow.
    Neither of those are available in SharePoint Online, so what would you do?

    Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
    that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
    and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
    is hosted by another server.
    By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
    on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out.  XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
    alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
    Mike G.

  • Questions about 3702i and WSM (WSSI)

    I have several questions about the 3702i AP and the WSM that do not seem to be answered in the data sheets/documentation.
    Any insight would be appreciated.
    1. Is the WSM officially supported on the 3702 AP? The documentation seems to conflict on this.
    For example, at the top of the WSM data sheet: "Flexible add-on third radio module for the Cisco Aironet 3600i or Cisco Aironet 3600e Series Access Points". Then later on in the page graphic shows the 3700 series radios too. I have found multiple pages that have similar conflicting information.
    2. Can the WSM be used WITHOUT MSE and Cisco Prime? If so, are there any limitations?
    3. How does the licensing work? Where is the license installed -- WLC, MSE, Prime? Do ANY of the features work without the license?
    3a. How do you order the license? The SKU listed on the data sheet (L-WIPS-MM-1AP) is not a valid part number in CCW.
    4. Is it possible to do sniffing with a WSM? (the idea being not having to dedicate an AP to sniffing, or taking down a client-serving AP to sniff)
    Thank you.

    Ok, so you are talking about off-channel scanning, which is actually a very short duration 50ms, that the AP is actually off-channel to scan.
    http://mrncciew.com/2013/03/16/configuring-rrm/
    Are you thinking of this bullet point?
     Access points with wireless security module: The Cisco Aironet® Access Point Module for Wireless Security aggressively scans all channels without affecting the data-serving radios in the 2.4- and 5-GHz bands.
    To me, that's just saying that the WSM is scanning and not interferring with the AP's normal radios.
    HTH,
    Steve

  • A question about UDA and Data-Forms

    Hi all,
    I have a couple of questions about UDA. I am using Hyperion Planning 11.1.1.3m, and when I desing a Data-Form I would need to use the UDA I asigned for the Entity dimension: is that posiible?
    The other question is, when creating a Substiution Variable in Essbase I use the function @UDA (+dimension+, "MemberA"), but when using this variable in the Data-Form, it does nothing at all(in fact, it is been detected as an error). Why is that happening?
    Thanks a lot

    Use an attribute dimension to achieve what you are trying to do with UDA's in a data form. An attribute dimension will allow you to filter on members in the base dimension by a specific attribute the same way a UDA will. You can create the attribute dimension in the dimension editor in Planning by selecting the base dimension (Entity) and then select the custom attributes' button. Check the dba guide for a step-by-step approach.
    With regards to the subvar, are you trying to add the function as a value of the subvar when you create it in EAS? If so, this is not allowed. What are you trying to do with the subvar on the form? Subvars are supported in data forms as part of the member selection for a dimension. For instance, you can set up a subvar called CurYear and set the value equal to FY11 for the Fiscal Year dimension. In the data form you can set the member selection for the Fiscal Year dimension to CurYear. When the user opens the form, the member FY11 is returned.

  • Question about java and batik

    i want to make a project using batik.. if i want to animate the svg, can batik do this? i am confused about batik. does it support animation? and how do i read the mouse coordinates in an svg using batik? please help..

    thanks for the reply! what i mean in the second question is does the canvas in batik support mouse coordinates?
    from what i understand is i can add interactivity to a svg by using batik and java and no javascript.. am i right? i am asking because i am doing a gis project and i want to do it in batik and java. after creating the svg file in the web, it will be downloaded from a phone fow viewing. in orer to do that i have to do a program for the phone, right?

Maybe you are looking for