QUESTION ABOUT AN ERROR MESSAGE UPON STARTUP OF COMPUTER

I receive an error message at startup that says:
"an unexpected error occured while trying to load the microsolf framework library"
Is this causing damage to my computer? If so, what should I do?
I had my old info from my previous mac transfered to this new one.

Any help looking through these?
http://discussions.apple.com/search.jspa?objID=f808&search=Go&q=error+48

Similar Messages

I get an error message upon startup: "TypeError: Components.classes[cid] is undefined." Help!

In addition to the error message upon startup, the Enter key does nothing when I type a URL in the search bar; I have to click on the green arrow everytime to navigate to new pages. My about.home page is also empty when the program starts except a blank search bar in the center with no text anywhere around it. I installed 4.0 twice to see if that would fix the problems, but it didn't.

Usually caused by an incompatible extension.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

HT5634 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup

I have a 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup. Any way to fix it?

Windows 8 is not supported on your computer.
http://support.apple.com/kb/HT5634

[SOLVED] Question about GCC error messages.

I'm currently taking a course in C programming, and I have a question about the error messages returned by GCC.
When ever i try to compile a program containing syntax errors, i get cryptic and not very helpfull error messages.
If i try to compile:
#include <stdio.h>
int main(void)
int i;
i = 0
return 0;
I get following from GCC:
error.c: In function â:
error.c:8:2: error: expected â before â
But shouldn't the message be something like:
error.c: In function 'main':
error.c:8:2: error: expected ; before 'return'
or am I mistaken?
/AcId
Last edited by AcId (2010-10-13 17:48:19)

Woah. That is very strange. I've never seen that before.
I assume you're using Arch Linux. What text editor did you use to write the code? Which terminal application are you using?
...those questions are probably unrelated to the problem, but we might as well get them out of the way.

Getting error messages upon startup after installing Lab View 5.1.1.

I have recently purchased a DAQ system along with a computer, which uses a readout program written in Lab View. however, after installing Lab View 5.1.1 on this same system, I started getting some error messages and the readout program no longer works. Here are the error messages:
"The \SystemRoot\system32\drivers\nidmmk.dll device driver could not locate the entry point ?single PointWrite@mdsSimpleDIGPortPrimitive@@UAEXKKKAAJ@Z in driver Nidaq32K.sys"
as well as
"The ordinal 2011 could not be located in the dynamic link library nidaq32.dll. An error occurred while loading VT Digital buffer write.vi"
I would greatly appreciate any help I can get.

Hello,
Installing LabVIEW should not effect an installation of NI-DAQ. However, it seems to me that we may have installed a different version of NI-DAQ on top of the current version. This is very possible because the old LabVIEW CD�s contain NI-DAQ on them.
In this case, there is not an easy solution, we could try uninstalling and reinstalling combinations, but it will probably save the most time and effort to uninstall all National Instruments products and reinstall them. The best way to do so is from the ADD or REMOVE Programs utility from the Control Panel. Then we want to remove the following registry keys (BE SURE TO BACKUP YOUR REGISTRY!!)
HKEY_CURRENT_USER\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed. If you have Administrative rights, and you still cannot delete these keys, that is also OK. Continue with the remainder of the process.
Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp", "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a different location. If you are concerned about keeping old virtual channels and your SCXI setup intact, then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
Once these steps are taken care of, we should have clean system. You probably want to reboot and then reinstall the software. You should install development environments first, and then install drivers.
Just let us know if this does not take care of the problem, or if you have any questions on how to complete a step of the process.
Best regards,
Justin T.
National Instruments
NOTE: Turning off virus scan programs greatly increases the speed of uninstalling and reinstalling.

Question about dll. error message when loading - PSE 6

I have PSE 6 and suddenly get the following error message when I open PSE: Organizer-Photoshop Element PhotoshopElementsOrganizer exe- entry point fot found. CFBundle Copy File TypeForFileData could not be located in dynamic linc library core foundation.dll.
No idea what that means, what happened and how to fix this.
Is there anybody that can give advise to a non-computer literate person????
Help would be greatly appreciated.

See post #6 in this thread for a likely solution:
http://www.elementsvillage.com/forums/showthread.php?t=50471

Error Message Upon Startup

Hello All,
I'm having this very annoying problem with iTunes 7.6. When I try to start the application, I get the standard Windows error message: "iTunes has encountered a problem and needs to close." Here is the only info I have on it, from the error report:
AppName: itunes.exe AppVer: 7.6.2.9 ModName: unknown
ModVer: 0.0.0.0 Offset: 000c0189
I've tried uninstalling and reinstalling, I've tried the Repair function on the installer, I've tried using a different installer download, and nothing is working.
It is worth pointing out to you tech-savvy people that when I first encountered I had an iTunes problem was when I tried to open it (it must've been 2 months since I'd last tried it on this computer, I don't recall any problems beforehand), it said I needed to update QuickTime. I did, and then this. Now neither iTunes nor QuickTime works. The same thing happens with QuickTime.
HELP!!!!!
Thanks!
Cheers,
Cameron

The QuickTime problem will be causing the iTunes problem. (iTunes needs a properly functioning QuickTime in order to work correctly.)
So let's try swapping out your existing QuickTime.
Head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
7. Restart your computer.
Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
Switch off antivirus and antispyware applications prior to the repair install.
Go into Add/Remove and select itunes. Click "Change" and then click "Repair".
If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?

GET MULTIPLE ERROR MESSAGES UPON BOOKUP

MY COMPUTER IS "IDEACENTRE B SERIES ALL-IN-ONE B305" RUNNING WIN 7 HOME PREMERE.
All of a sudden, after a Windows 7 automatic update or running CCLEANER (I am not sure which) the computer produces multiple error messages upon bootup. The message is basically the same but each (about 17 of them) are associaged with a program the computer is trying to load. i.e. goodledrivesync.exe, skype.exe, clistart.exe, etc. etc.
An example of the message is:
Skype.exe Bad Image
C:\Search Protect\Search Protect\bin\VC32loader.dll
It then goes on the say the program is likely not designed to operate with Win 7 or the Image is corrupted.
First, I can't determine if the problem is a Windows 7 problem or a Lenovo software problem.
I have tried Windows update, I have tried Lenovo updating drivers etc. and as a last resort I did a restore but none of that helps.
I need some specific ideas. What have you?
Thanks Pat

Neither product are Apple products, I'd suggest contacting the manufacturers of each product. Apple products normally do not need driver's downloaded like a Windows machine. You should see if the version of their products on your machine is the most-up-to-date for your configuration. If it is then the driver updates are not necessary however if they are not then you need to update the version of their software because any drivers will be incorporated in the latest version.

Resolving "Reg Svr32" Error message on startup

I keep getting the following Error Message on startup:
"RegSvr32"
The Module C:\ProgramData\qayspiig.dat failed to load.
Help

Hello @Sam-l,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you keep getting a RegSvr32 error on startup on your computer and want to get it fixed. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

Uninstall and run the Cleaner Tool
Uninstall Creative Suite 4 and point products (Mac OS X)
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

QuickTime Version 7.0d0 Error Message Upon Installation

Hi,
Once I have downloaded the latest iTunes and installed it, I get an error message upon trying to open it which reads as follows;
QuickTime version 7.0d0 is installed, iTunes requires QuickTime Version 7.1.3 or later. Please reinstall iTunes.
At first, I did as the error message said, and reinstalled iTunes. I still got the same error message after I did that. So I then downloaded QuickTime on it's own, but that still didn't work.
Could anyone help me?
Thanks,
Luke.

Luke:
I followed the steps in this article and it worked!
http://docs.info.apple.com/article.html?artnum=93976
-David

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

Question on an error message in Event Viewer.

Hi,
I had a question on a error message in event viewer for BO 3.0
Error Message:
Tried to allocate 20 windows desktop but only able to allocate 17 of them.The system may have reached its windows desktop limit.Please contact your system administrator.
Source:CR Processing server.
I have seen this error message before in BOEXIR2 for DeskI services but never for Crystal Reports.
What is the change in 3.0 architecture due to which we receive this error message for cr processing server.
Thanks in advance.

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

HT3275 Any ideas about this error message? (error -1)

Any ideas about this error message?
"The backup disk image “/Volumes/Data/ MacBook Pro.sparsebundle” could not be accessed (error -1)."

Standard Lion networking .. Reboot the TC or use the disconnect all users in the AU.. it has not closed the sparsebundle correctly from last time.. or has simply forgotten where the TC is.
It is reported at least once a day here.
See C17
http://pondini.org/TM/Troubleshooting.html

Resolve for 1606 Error message upon installation...

I experience this error message upon installing PalmDesktop 6.2 to Windows XP Professional w/ service pack 2.
Post relates to: Treo 680 (AT&T)

Hello!
These 1606 errors are no fun to deal it and can be very tricky to resolve. Go to this Microsoft KB article to get you started on this error:
http://support.microsoft.com/kb/315352

QUESTION ABOUT AN ERROR MESSAGE UPON STARTUP OF COMPUTER

Similar Messages

Maybe you are looking for