Question about Audigy 4 and bug report regarding the THX-cons

Will there be a non-pro version of the Audigy 4 and when?
The THX-console doesn't remember its settings when I switch from one speaker config to another. This is pretty annoying since I use both a hi-fi system and headphones.
Could you fix this please?
Thanks!

thanks for info. Sorry I didn't post this earlier but the slider has corrected itself. Also the is probably being used by the os

Similar Messages

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

Question about MII and xMII UDS versions

Hi all,
just some quick questions on MII and MII UDS:
Has the final version 12.1 of MII already been released? I can't find it in my service marketplace (does it depend on my account configuration?)
What is the last MII UDS version? The 4.0 SP2? Is xMII UDS supported on Windows 2003 server 64 bit or only on 32bit?
Can I connect MII via UDC connector to an UDS different from xMII UDS?
Your help is appreciated...
Mauro

>
> * Has the final version 12.1 of MII already been released? I can't find it in my service marketplace (does it depend on my account configuration?)
Yes, it would depend upon your SMP credentials and licensed software purchases (if you have 12.0 then you're eligible for 12.1 too). But it is not GA yet, so only people in ramp-up currently have access to it. Don't both asking for a date because it has not been set. Some time this quarter hopefully
>
> * What is the last MII UDS version? The 4.0 SP2? Is xMII UDS supported on Windows 2003 server 64 bit or only on 32bit?
The 2.5 UDS's are still viable and necessary for some of the vendor API based connections, but 4.0 is available for OleDB, OPC-DA and OPC-HDA. They have only been validated on 32 bit, but in theory they should work in a 32 bit emulation mode on a Windows 64 bit environment. Supported vs. unsupported is a thin line as a result, but perhaps others using them could share any specific experiences using them on 64 bit.
>
> * Can I connect MII via UDC connector to an UDS different from xMII UDS?
Your MII version of 11.5, 12.0, or 12.1 will work the same way with the UDS's as they are not version specific to MII.
Regards,
Jeremy

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist

lawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

Question about RAC and ASM

Hi,
We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
I'm a newbie to RAC and ASM..
Thanks,

user4866039 wrote:
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
Bjoern

Ability log and track the time and expense reports of the sales employees

Hello Experts
Ability to log and track the time and expense reports of the sales employees.
Can we do this through WEB UI
Please revert.
Regards

Hello
Thanks for the reply
I thought of storing time zone in the time and use session variable to pick up user's log in info along with time zone that he is associated with.
However, if it has to be maintained by a table, then it should be manually updated right? I don't think that's what I want to do because a lot of our users travel a lot for short time, so they may not have their time zone info updated in the DB table when they are traveling somewhere else for a brief period while accessing OBIEE.
So my question is, how can I pick up user's locale time zone setting and make sure that the data, such as hour conversation are converted along with the displayed time stamp?
Thanks

Not a question. A comment actually. Regarding the persistent blue Autofill popup in Safari. My wife first shut down the Mac then unplugged it for a few minutes. On restart, the box was gone.

Not a question. A comment actually. Regarding the persistent blue autofill box that may appear in Safari, my wife shut down the iMac then unplugged it for a few minutes. On restarting, the box was gone.

Do you have a question?

Question about Audigy 4 and bug report regarding the THX-cons

Similar Messages

Maybe you are looking for