Question about audio in and xbox360 audio on the x-fi audio c

I am having an extremely difficult time getting my audio to go from my 360 through the card. I have updated everything and still can't get any audio. I actually had audio for a day or two and then it stopped and I have no clue why it started or stopped.
I have my 360 hooked up to my monitor through the vga adapter and the audio is plugged into an adapter that goes to a single cord that plugs into the back of the card.
I had this previous settup under windows xp on another motherboard and the audio worked fine. I installed vista on a new mb and the audio wouldn't work with onboard so I bought the card. I get the same issue with the card although it did work for a few days as I said. Then it just stopped working and I hadn't touched any audio setting directly.
I've gone through all the audio setting I can find and have tried switch things on and off under sound which lists speakers and digital audio interface under playback. The audio from winamp goes through the digital audio interface (I can see the sound bar going up and down on it.
There's another tab that says recording and includes s/pdif-in, line-in auxiliary and microphone. All of those are unavailable except for the microphone. I've tried switching to the other devices and none of them have made the 360 audio come out.
I've also checked the hardware configuration under hardware manager and the device is working fine. I'm sure it has something to do with vista because everything worked under xp before.
Anyone else have this issue before? It kind of sucks that I can't play audio from my 360 to my speakers. I'm looking at installing linux on my other partition and see if it works through there....

Yep. I have the latest audio drivers for the card for vista and it was working. I was pissed because I couldn't get the audio working, then all of a sudden it worked and I have no clue what I might have done to fix that. I was playing bioshock for a few days and then I went one day to play it again, turn on my 360, and no audio at all.
It has to be either some audio setting, a driver issue, or some sort of incompatability in the software. Vista says the device is working and I do get audio out to my speaks from the computer so it has to be an issue specifically with the settings for the I/O jack, I think.
Like I said I had the same issue with my onboard sound so I bought the card. So i'm guessing it's some sort of vista setting. I'm just wondering what to check in the vista sound menu's. I have only just started using vista so I am not completely up to date on vista. The sound menu seems far more robust in terms of devices displayed and such.

Similar Messages

Question about Audigy 4 and bug report regarding the THX-cons

Will there be a non-pro version of the Audigy 4 and when?
The THX-console doesn't remember its settings when I switch from one speaker config to another. This is pretty annoying since I use both a hi-fi system and headphones.
Could you fix this please?
Thanks!

thanks for info. Sorry I didn't post this earlier but the slider has corrected itself. Also the is probably being used by the os

Help!! 3tracks of audio playing and it keeps on given m "core audio

ola my name is fedro.
i just bought an imac 2.16Gz i run logic pro 7 nothing else.
when i 1st install logic in my "1st imac" the logic crash a lot and the mute tool on the arranje window take about 5sec to mute. also the system performance runs realy high with only 5 audio track playing!! not normal after 300 calls to apple support they told m the mac must had a hardwear problem,after 2 visits to apple enggineers and a replaced the harddrive the mac still run logic very poorly.
They gave a replacement,but it does just the same.
i have only 3tracks of audio playing and it keeps on given m "core audio or hardisk to slow"messages iam shure i have enough memory!?

i run logic pro 7.2.0(954)imac 2.16Ghz 1Gb ram duo
core
Well geeze... that shoots my theory all to ****.
they just replace my first imac because of similar
problems:(((
do u guys get an 5sec delay on the mute tool"in the
arranje window)? when playing back audio??
No! Right now I'm mixing 10, 24-bit tracks from a location recording. Using 5 channel eqs, 2 Sonalksis eqs, 2 Sonalksis compressors and a wizoo convolution reverb (this is on a G4) and everything is pretty much instantaneous, about 45% processor usage.
Your computer is several times more powerful than what I'm using.
You're using internal audio?
Try updating Logic to the most recent version.
I find it hard to believe it's RAM or Disc related, but maybe so. I don't have any experience setting up the intel machines.
Fedro, are you running a bunch of plugins on the audio tracks? If so what are they.
pancenter-

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

HT201303 i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

ITunes dosent recognize my audio DVD and is stuck in the computer

iTunes dosent recognize my audio DVD and is stuck in the computer.

Is your computer Windows or Mac? Since you only posted the software for your iphone

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?

Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

I have a question about extracting pages. When I do the function, adobe saves the individual files as " file name space page number ", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I a

I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?

No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

Anna...
Could be the graphics card.
Run the Apple Hardware Test

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

Question about audio in and xbox360 audio on the x-fi audio c

Similar Messages

Maybe you are looking for