Question about bone tool

Hi!
I am new at Flash and I have a problem. I've looked around in many resources, but cannot find any solution.
I’ve made a running man (you can see it in attached FLA file or in my homepage http://www.idealex.lv/prewiew/) using BoneTool. I would like to know is it possible to avoid man’s legs going below the ground line? Is it possible to make movement of the lower part of the leg fairly horizontal?
Thank you very mush for any answer and sorry for my poor English.

>...is it possible to avoid man’s legs going below the ground line?
Well you could either move the man up a bit until his legs barely touch the ground. Or move the ground line down to achieve the same effect.
>Is it possible to make movement of the lower part of the leg fairly horizontal?
In the animation the lower leg is a little quirky at times so, in those specific frames, just SHIFT-drag to position it in the correct pose without affecting the rest of the man.

Similar Messages

Question about Pencil Tool properties

hi,
i need to know this option in pencil tool properties &
difference about them :
Scale ( Normal - Horizontal - Vertical & None )
Cap ( None & Square )
thanks inadvance

AlMostabed wrote:
> up :)
open flash - Help - search "Stroke Hinting"
with the ""
read technote
Using the Stroke Color and Fill Color controls in the
Property inspector
To see difference you will need to adjust the size to larger,
like 8 to 10 pixels.
Than you will see differences in setting
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Question about missing tool panel

I accidently x'ed out the left tool panel, and I don't know how to restore it... I have closed and reopened. I even unistalled and reinstalled and still nothing. I am looking for a link around the corners to maybe bring it back but nothing.

thank you for your help. it worked

Simple question about pen tool in Flash vs Photoshop

Hi,
After years of fumbling with the pen tool, I devoted my holiday weekend to mastering the pen tool in Photoshop. Though not necessarily a grand master of the pen tool, I'm happy to report that I've turned a corner and have transformed my pen tool feelings from fear/anger/hate into love/happiness/accomplishment. At long last, it all makes sense.
I think.
Today, I zipped into Flash to experiment with a tracing assignment I'm giving to my students in an upcoming Flash class. As I started to trace the path with the pen tool, I realized that it was behaving differently than it does in Photoshop. My specific problem is this:
I place an anchor point and draw a line. Then I draw another line. Then I draw another line. Then, I decide to adjust one of the handles and try to draw another line. But it won't let me just go back to adding things to the path with the pen tool if any part of the process is disrupted.
This seems like pretty basic functionality! What am I doing wrong?
To make sure that I wasn't crazy, I went back to Photoshop and tried to do the same thing. It works just fine in Photoshop. At any time, I can hop away from the pen path and then back over to the pen tool. All I need to do to extend the path with the pen tool in Photoshop is to click on the last anchor point in the path. Surely, this must also be possible in Flash.
I would be grateful for any advice!
Aaron

both in flash authoring tool not flash player.

Question about Paint Tool

Is there any way you can control how fast the light streak preset for the paint stroke tool to move? Adjusting the layer's time length doesn't do anything and I don't see any speed options available. I want to slow down the stroke's travel across the screen. The Write-On option also doesn't seem to work when the trail I make lasts for more than 3ish seconds....it ends up not displaying anything.

If you look closely, the light streak presets use keyframes in the Color Over Stroke parameter in the Stroke section of the Shape tab. Go to that section and watch how the Opacity changes over time as well as the overall color.
Unfortunately, I was unable to trick it into going slower by using a behavior. It seems as if you can't add retiming behaviors to paint strokes. This means that if you want to slow it down, you'll have to do it the hard way.
Go to the Stroke section in the Shape tab of the inspector. Click on the keyframe button to the right of the presets (looks like a dash or a diamond) and select Show in Keyframe Editor from the menu. This will show you all the keyframes used in that parameter.
To lengthen, make sure the clip is as long as you want it and go to the end. Lasso all the end keyframes at the point they currently exist (frame 60 I think), and drag towards the end of the clip making sure to hold down the shift key so that their relative values don't change, only their positions.
Now do the same with the keyframes in the middle (at frame 30) and drag them to the current middle. In my case I made the 2 sec effect last for 3 secs. So I dragged the end keyframes to frame 90, and the middle keyframes to frame 45.
That will slow down the effect for you.
Andy

Question about pencil tool in Flash CS4

The thing that I am having difficulty with is the pencil tool.It does not render a line as I draw it but only after I release the mouse. How do I correct this?
thanks
Mango

AlMostabed wrote:
> up :)
open flash - Help - search "Stroke Hinting"
with the ""
read technote
Using the Stroke Color and Fill Color controls in the
Property inspector
To see difference you will need to adjust the size to larger,
like 8 to 10 pixels.
Than you will see differences in setting
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Question about Pen Tool

Why does the Pen tool have feedback (ie. the "+" and "x" icons when near a shape etc.) only when starting to draw a path, but not after that?
For example, I have 2 parallel lines at some distance apart. With the Pen tool, I want to draw a path that unites their middles.
I click on the first line to set an Anchor point; then I keep drawing and setting Anchor points. But when I get near the second line, there is no more "feedback" on the Pen tool. So I don't know if my next Anchor Point I set will end exactly on the line (as I want) or "overshoot".
Is there any way to know?

Hmmm. I masked my actor. Hit the stopwatch on Mask Path, then went to the next frame. I added another keyframe and changed the mask to fit the new position but noticed it still changed the mask for the previous frames. I can't seem to figure out how to edit frames individually...

Hello I have a question about Converting 60 23.98 Cannon Mark III footage. In cinema tools, my footage stays grayed out. Both when I try my Compressor pro-res footage,

Hello I have a question about Converting 60>23.98 Cannon Mark III footage.
In cinema tools, my footage stays grayed out. Both when I try my Compressor pro-res footage, & original footage from cam.
When I convert from 60>23.98 in the Gopro app, it works fine.
Does anyone know if there is any quality loss in this app?
Also does anyone know another free software tht works great to convert markIII 60>23.98 footage?
Thank u thank u thank u !!!!

Questions about Cinema Tools should be asked in the Final Cut Studio forum.
Russ

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

Another one question about how to download applet (not using external tool)

Hi
i write tool for downloading applet on card. I use apdu trace from NXP eclipse plugin as source of information and i read also about cap-file format in Java Card Virtual Machine specification. And i have questions about data transferred by LOAD command.
As example - from apdu trace i see that transferred data are "C4820E33 DATA1 DATA2". Full length of transferred data is 0x2EE2.
C4 - OK, this is "Load File Data Block" tag as specified in Global Platform
820E33 - OK, this length of tag, =0x0E33
DATA1 - sequence of cap-file components: Header.cap, Directory.cap, Import.cap, Applet.cap, Class.cap, Method.cap, StaticField.cap, ConstantPool.cap, RefLocation.cap. Length of DATA1 is 0x0E33, i.e. DATA1 = 'C4'-tag value.
DATA2 - sequence of two cap-file components: Descriptor.cap and Debug.cap. These components are out of 'C4'-tag.
the questions mentioned above... here they are:
1. Global Platform does not define any data in LOAD command except 'E2' and 'C4' tag. Why DATA2 is transferred out of any tags?
2. Whether the sequence of cap-file components is important? i.e. Can i load Header.cap, Directory.cap etc. in other order than i see in DATA1 field from apdu-trace?
3. Debug.cap seems to be optional component. And what about Descriptor.cap component? Need i load it on card?

666 wrote:
1. Global Platform does not define any data in LOAD command except 'E2' and 'C4' tag. Why DATA2 is transferred out of any tags?Because the components are either optional or only required when communicating with a JCRE that has debugging capabilities. I assume you ran the project in JCOP Tools in debug mode against the simulator? If you did this against a real card it would fail as it does not have an instrumented JCRE capable of debugging code. You could try running the project as opposed to debugging to see the difference.
2. Whether the sequence of cap-file components is important? i.e. Can i load Header.cap, Directory.cap etc. in other order than i see in DATA1 field from apdu-trace?Yes it is. It is defined in the JCVM specification available from the Oracle website.
3. Debug.cap seems to be optional component. And what about Descriptor.cap component? Need i load it on card?No, it is optional and is not referenced by any other CAP file component.
Cheers,
Shane

Question about the animated Pen tool

Hi,
ive a question about the animated pen-tool.
i draw a word, but my hand isnt very calm, so the result is what you see on the screenshot.
Is there a possibility to reduce the points on the animated pen tool like in illustrator?
i know in illustrator its possible, but i didnt found anything in after effects to do it.
thanks for your help

If you are using the Paint tools those options don't exist in After Effects. The only work around is to set a keyframe for the brush path, copy the keyframe, then go to Illustrator and in a blank document the same size as your layer paste. Once in Illustrator you can simplify the path, select it, copy it, then go back to After Effects and select the same keyframe then paste. If you get a mask instead of a new path delete the mask path, make sure you have only the original brush path keyframe selected, then go to Edit>Paste from the menu.
It doesn't look like you're drawing a mask path. That might be a better way to go.

Follow-up question about forms and SharePoint Online

I asked a question about life after InfoPath earlier, and got a good answer:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
pages and workflow.
Neither of those are available in SharePoint Online, so what would you do?

Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
is hosted by another server.
By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out. XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
Mike G.

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Some questions about a Time Capsule

Hi!!
I just have a few questions about a Time Capsule, but first let me explain the backgroud to my questions.
I live in a 2 floor house(including a basement) and my bedroom is downstairs. My parents currently have a desktop PC connected to our wireless router and our printer. Me and my step-father both have 13 inch MacBook Pros, and he uses the Mac like a basic computer, so the equipment connected to our PC is good for him. I, on the other hand, use my Mac, iPad and iPhone to their fullest potential. I am a SUPER MEGA NERD when it comes to computers, so I plan on making my bedroom an amazing office at the same time. So I want an AirPrint Enabled printer in my bedroom (Under 100$$) along with a Time Capsule to back up my information, because everyday I look around in the backdoor of my Mac alot, and if I jack anything up (And I cant handle the problem) I would like to restore my Mac to a previous version. So here are my questions:
1) My bedroom is right underneath our router, so i get GREAT Wi-Fi in my room. If I get a Time Capsule, can I use it in my room to extend my Wi-Fi, and how would that work? Will it extend my wifi under the same name, because I would like my own Wi-Fi (Titled to what I want with my own password)
2) If I have to create a NEW Wi-Fi network, how would I do that?
3) Would I need to connect my new printer directly to my ROUTER, or could I connect it to the TIME CAPSULE?
If you don't understand what I'm trying to ask (Even though I feel like it's self-explanatory)
ONE question about the PRINTER: Do any of you have any recommendations for an AirPrint Enabled printer under 100$? Even under-150$ would be okay.
THANKS FOR ANY HELP!!!!

everyday I look around in the backdoor of my Mac alot, and if I jack anything up (And I cant handle the problem) I would like to restore my Mac to a previous version. So here are my questions:
Don't just depend on TM.. use a disk image type utility.. either one of the Mac tools, SuperDuper, CCC, Chronosync or even a linux boot cd (if you have a cd/dvd drive still or via usb can boot) a great tool is Clonezilla.. it will do basically any computer, Mac, Linux, Windows.. and since it boots into its own OS can restore a computer in a flash. Then you can add the incremental changes from TM.
1) My bedroom is right underneath our router, so i get GREAT Wi-Fi in my room. If I get a Time Capsule, can I use it in my room to extend my Wi-Fi, and how would that work? Will it extend my wifi under the same name, because I would like my own Wi-Fi (Titled to what I want with my own password)
Actually I am surprised you get good wireless as usually directly above or below a router is often the worst spot. Time Capsule cannot extend the wireless of any other router than Apple.. it is a special system and only Apple can join the club. It has bad effect though, if you set the TC to extend wireless it turns off ethernet ports.. which is hugely dumb.
The best arrangement is ethernet to the upstairs.. or EOP adapters. If not then a wireless router that matches the existing unit will generally be better than mixing apple and non-apple.
2) If I have to create a NEW Wi-Fi network, how would I do that?
3) Would I need to connect my new printer directly to my ROUTER, or could I connect it to the TIME CAPSULE?
You create a new wireless network by selecting manually the wireless channel and use different wireless name, ssid and security. There are 3 available channels on 2.4ghz.. your existing router will use one or two.. depending on if the setting is 20mhz or 40mhz.. so you need to manually set everything and not use auto.
TC is slow on 2.4ghz cf 5ghz and there are many more channels at 5ghz but not everything can use it.. iphone for instance is 2.4ghz only . whereas ipad can use 5ghz.. most full computers now can use 5ghz.
Buy a wireless network printer. Or alternatively an ethernet network would be also ok but now are more expensive than wireless ones. Network printers are not much more than straight USB and work much better.
I do not use airprint so have nothing to offer.. find the best HP model in your budget.. but others may have had more experience.. I use ethernet connected b/w laser business type HP.. they work great.. but airprint is too recent an innovation for me.

Question about sony NFC tags

Hi every body,
I have a little question about the NT1 smart tags of sony.
I installed other app from google play to NFC tags in my phone.
I installed it, because the smart tag app of sony, don't have the action to turn on or turn off the GPS by NFC tag.
When I used with other app, and I written on the blue smart tag, I mark to became the blue smart tag to read only.
So, now I can't to write on him, and the phone is not recognazied the blue smart tag ( all other smarts tags is OK, because I didn't used them ).
When I scan the blue smart tag, the phone show a message: "unknown type tag".
Am I can cancelled it and became it back? that's mean that the phone is recognaized it and I can to write on it?
Or, is it one way, and I can't used with the blue smart tag again?
Thank you.

you can do a factory reset or repair your phone with SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Question about bone tool

Similar Messages

Maybe you are looking for