Question about book chapter

Hi,
I know this is probably a long shot but here is the scenario:
I design book interiors and each chapter opening page has a specific master page applied to it, the trouble is when a page shifts the master page doesn't follow which means I have to go through the entire book (if the change was at the beginning) and re-apply the master page.
Does anyone know of any way I could streamline this process, possibly by being able to "link" a master page to a specific text frame?
Any help/advice/ideas would be greatly appreciated...again I know this is a long shot.
Thanks in advance,
Jack

This is not normal behavior. Let me ramble this through my head.
If you have a threaded story, editting copy can cause content to change position away from an applied master. (It is permissable and desireable to have one threaded story for an entire document) There is no Section Break character, add that to wish list.
Yep, I've chased that dog.
Break the Chapters into a Book file.

Similar Messages

Question about book printing size

Hello,
I am working on a book design. But I haven't decided on the book size yet. For now, there are two sizes that I may choose from. So I need to ask some one's opinion who has knowledge about offset printing.
One size is 295 x 250 mm Portrait size. This is a little bigger than the other.
The smaller size is 230 x 260 mm Landscape size.
We use ISO A-0 printing sheets.
The book will be about anywhere from 250 to 300 pages.
My main question is, will there be any price differences on these two sizes?
Some people say that anything a little bigger than A4 size is automatically calculated for A3 size, which is the double A4. These two sizes both are a little bigger than A4 and fits within A3 size.
If there is enough difference, I want to go for the smaller size. If I can set my mind on one size, it will save me a lot of work and confusion.
Thanks.

I would think the size would be dependent on a few issues: genre, type of content, and the publisher to name a few. You could minimize costs going with the smaller size obviously, but I, for one, cannot make a recommendation without getting more specific on the details. Have you discussed the size with the publisher?

[Programmer Certification] Question about books

Hi there,
is this book helpful for the 1Z0-141 exam ?
Title: OCP Developer PL/SQL Program Units Exam Guide
ISBN: 0072193360
This book is said to prepare for exam 1Z0-101. Is it still good for the 1Z0-141 exam ?
I really like these exam preparation books but could not find any for the 1Z0-141
Any advice is welcome.
Francois.

The ones most recommended in the forum (my impression) are:
LabVIEW for Everyone
And for the more advanced
The LabVIEW Style Book
I have both, and would say they are worth the money. But certainly your knownledge of LabVIEW will make one of these your favorite (for Everyone came to late in my career, but newcomers won't get the ideas of the Style Book).
Over all, there is only a limited choice of books on LabVIEW. There was a funny statistc that placed LV among the most exotic insignificant languages by using the number of books available...
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Questions about books

i downloaded a few free books from the itunes store and i then i saw an app called stanza. I was wondering. Does each book suppose to take up an icon or if i have stanza it adds all books there and i just have one icon for all my books?

stanza isn't every book but there are a ton of public domain books that are contained within it. Most of the free books on the iTunes store are also public domain (as well as many of the paid ones)
Each application only takes one icon so when you tap on stanza you can search for a list of books to use within that application.

Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

Question: about to purchase ipad air - how do I migrate contacts,bookmarks,and address books from either an iMac or old macbook?

Set up iCloud on both devices
How to set up iCloud on all your devices
http://www.apple.com/icloud/setup/

HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how. It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !
Thank you !!

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Start up in Safe Mode
    http://support.apple.com/kb/PH11212
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
If this does not help, you have to buy an external HD and move your movies photos.etc to
the external HD.

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

Some questions about building a plug in

Hello,
1.I'm trying to build a plug in ( for EM12c release 2 ) for my standalone java application - which exposes mbeans whom i want to collect some metrics with.
It's been a while since i started to build it - and I asked quite a lot of quesions about it - because the documnets supplied with the EDK and
the books ( ProgrammersGuide, ProgrammersReferece and the README file ) are not very clear to me ( I'm a newbie with EM in general .. )
So far some of the questions got answered and were very halpfull with this long process. BUT, there are some questions that nobody answered yet.
I'm quite "stuck" with it. I'm talking about the questions in : Re: A question about updating metadata files in plug in
I have a deadline for this plug in ( which is very close ..) so this the reason I post this new message.
I will appriciate any help about those questions .
2. Regarding the above, ( hoping to have an answered soon ..) I'm trying another way to buils this plug in:
In the README file there is this section( 3.6 : using MPCUI ) . I read the programmersReference ( chapter 8 ) and followed the instructions both in the README file and the ProgrammersReference .
For a begining, I just wanted to modify a small thing in the example supplied ( Demo Host System ) just to get started with something .
So i modify the file which contains the label ' Select member ... ' ( i don't remember the name of the file since the project is in my office , and I can't copy/paste ..- I think the the file icontians the name ' ConfirmationTarget .xml - it's one of the pages seen while adding a target ) .
I i changed it , i build the project ( using FlexBuilder) but did not use ANT as it's says in the README - the eclipse IDE build this file automatically
( HostSystem.swf in bin-debug dir as it says in the README ) . I copied this file to stage_dir/oms/metadata/mpcui .
i build a new plug in ( i incremented the version of it ) - no errors, everty thing was fine .I also copied this file to the oms server ( it wasn't there before )
and than run the commad ' emctl register oms ...' as it says in section 3.6 - and o got 'Success' eventually .
Now, when i opened the EM console , hoping to see tge change i made ( again , it's just a change of the title of the step while adding the target , and adding another menuitem to the 3 item that were alreay there ( CPU, FS, etc ) .
I believe wad i did is right- i mean changing in the right file and place ( there is no title like like this in any oter source file in the whole project )
but still, I didn't see any change! it seems execatly as it was befoer the change ..
Any idea?
Thanks.

Regarding your question #2. Please read my response here carefully as it covers a number of different issues.
1. Ant is not required to build the SWF file in your plug-in. It is an OPTION. Section 8.27 describes the different development options using either Ant or FlexBuilder.
2. You do NOT need to ever copy a SWF file to any location under the OMS runtime. You need to include it in the stage area and then either build an OPAR or use emctl to incrementally update the deployed plug-in. It has to either be deployed as part of the plug-in deployment or updated incrementally using emctl register oms metadata. Section 8.27.2.6 describes the specific steps to do this incremental update.
Steps to update the SWF associated with demo_hostsample. These are covered in the README and in chapter 8.
1. deploy the demo_hostsample plug-in as described in the README
2. create an instance of the Host Sample target type through manually discovery (Add Targets->Add Non-Host Target Specifying Properties)
3. using the demo_hostsample.zip project in Flex Builder, modify some part of the code, for example, modify the line containing label="Current Status" to label="My New Label"
4. rebuild the SWF, to be sure you can to a Clean build of the demo_hostsample project
5. ensure there is an updated copy of the HostSample.swf under demo_hostsample\mpcui\bin-debug (NOT bin-release, unless you Exported A Release Build)
6. copy that updated HostSample.swf file to the location on the OMS machine where you unzipped and built the OPAR for the demo_hostsample plug-in
7. cd to the stage/oms/metadata/mpcui directory and replace the current HostSample.swf with the one you just built (BE SURE ITS THE UPDATED FILE)
8. execute the command "emctl register oms metadata -sysman_pwd sysman -pluginId oracle.sysman.ohs -service mpcui -file demo_hostsample_uimd_swf.xml (BE SURE TO USE THE CORRECT sysman_pwd)
At this point you should be able to go to the homepage for the Host Sample target you created and see the changes.

Questions about editing with io HD or Kona 3 cards

My production company is switching from Avid to Final Cut Pro. I have a few editing system questions (not ingesting and outputting, just questions about systems for the actual editors - we will have mac pros with either kona 3 or io HD for ingest and outputs)
1) Our editors work from home so they most likely will be using MacBook Pros - Intel Core 2 Duo 2.6GHz 4GB computers with eSata drives to work on uncompressed HD, will they be able to work more quickly in FCP if they are using the new Mac Pro 8-Core (2 Quad-Core 2.8GHz Intel Xeon) or will the mac book pro's be able to hold their own with editing hour long documentaries, uncompressed HD
2) Will having an AJA Kona 3 (if we get the editors mac pros) or io HD (for the mac book pros) connected be a significant help to the editor's and their process, will it speed up their work, will it allow them to edit sequences without having to render clips of different formats? Or will they be just as well off without editing with the io HD?
I'm just trying to get a better understanding of the necessity of the AJA hardware in terms of working with the editors to help them do what they have to do with projects that have been shot on many formats- DVCPro tapes, Aiptek cameras that create QTs and P2 footage.
Thanks

1. with the IoHD, laptops become OK working with ProRes and simply eSata setups. Without the Io, they can't view externally on a video monitor (a must in my book). It will not speed up rendering a ton, nor will it save renders of mixed formats. The idea is to get all source footage to ProRes with the Io, and then the Io also lifts the CPU from having to convert ProRes to something you can monitor externally on a video monitor, and record back to any tape format you want... all in real time.
2. Kona 3's on Towers would run circles around render times on a Laptop... no matter what the codec, but the Kona does not really speed renders up. That's a function of the CPU and just how fast is it. (lots of CPU's at faster speeds will speed up render times).
I'd recommend you capture to ProRes with Io's or the Kona 3 and don't work in uncompressed HD. You gain nothing doing it quality wise at all. And you only use up a ton of disk space (6 times the size in fact) capturing and working in uncompressed HD, which from your post, you're not shooting anyway. The lovely thing about ProRes is that it's visually lossless, efficient, and speeds up the editing process. Mixing formats can be done, but it's better to go to ProRes for all source footage, and edit that way.
With either the Kona or the Io, you then can output to uncompressed HD tape... that's what they do for you no matter what codec you've edited in. ProRes is designed to be the codec of choice for all HD projects when you're shooting different formats especially... Get them all singing the same tune in your editing stations, and you'll be a much happier camper. Only reason to buy laptops is portability... otherwise you're much better off with towers and the Kona 3 speed wise.
Jerry
Message was edited by: Jerry Hofmann

A few questions about Patone colors

I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.

You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+)

Question about swapping SIM cards on a Z10

Hi, everyone, I am a non-Blackberry user who works in IT support. One of my clients uses a Blackberry and has often asked me very complicated questions about how to do various unusual things with his device. At the present time, he is considering switching to a Z10, which would be set up using ActiveSync. He wants to know if he could swap the SIM card without having to go through the setup process again. My client travels a lot, and wants to use a local SIM card on an upcoming trip to a very remote area.
I've not been able to find an answer to this anywhere.
This is his exact question: "I just got it from a friend (ATT version) and I am trying to see if I like it enough to switch to it as my primary phone. Blackberry z10 asks you to sign in with your blackberry world ID when you first set up the phone. Question: Would you have to do it again if you put a different simm into it? With iPhone, it makes no difference so long as the device is unlocked—you can then exchange simm cards as often as you want. Would it be the same with an unlocked blackberry z10 (I know it's not possible with the bold 9900 as System 7 ties your ID to the simm card). In short, in blackberry z10, could you exchange the US simm for another country's simm without having to wipe the phone, etc. "
If anyone can shed some light on this for me, I'd be very grateful., Thanks!

Hi and Welcome to the Community!
The key issues are thus:
Ensuring that the device is truly carrier unlocked
Ensuring that the specific device model is compatible with the radio frequencies/technologies that the desired carrier uses. There are 4 different Z10 models:
http://www.bbin.in/en/2013/03/03/4-types-blackberry-z10-models-fits-better/?utm_campaign=4-types-of-...
If both of those are OK (separate research of the desired carriers would of course be necessary), then it is indeed a simple matter to change carriers. For example, I changed from ATT to TMO by simply changing the SIM...no need to WIPE or anything, and my same BBID came along just fine. You should, however, always obtain a properly-sized SIM card from the carrier -- there are plenty of reports of folks trying to use "cut" SIM cards and experiencing errors.
With BB10, it's actually simpler than with legacy BBs. Legacy BBs used the BIS service, which required receipt onto the device (from the carrier data network) of Service Books so as to activate the various services that the user subscribed to. When changing carriers, it often could be that a latent Service Book from the prior carrier causes issues when shifting to a different carrier...and that's where WIPING and such came into play, so as to cleanse the device so that the new carrier could deliver all of the proper Service Books to the device. With BB10, there is no BIS, and there are no Service Books...so all of that complication is eliminated.
But, as always, YMMV.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Questions About JSP?

hi;
I am php devloper and I am learning Java now.
I am using NB6.1 , Tomcat 6.0 , J2ee 5.
I have some questions about devleoping web application with jsp.
1.What are
/WEB-INF/web.xml
/META-INF/context.xml
/META-INF/MANIFEST.MF
files that generated with NB.are important or optional.are auto generated or may I edit.
2.can I distribute my web application in non text format.How?
3.if I want to add some files to my application that its running in tomcat.how can i do that with out rebuild all.
thank you
Add to mtz1406's Reputation

thank you all for helping.
I will write more information about my questions may this help others:
*{ /WEB-INF/web.xml* - The +Web Application Deployment
Descriptor+ for your application. This is an XML file describing
the servlets and other components that make up your application,
along with any initialization parameters and container-managed
security constraints that you want the server to enforce for you.
This file is discussed in more detail in the following subsection.
As mentioned above, the <code>/WEB-INF/web.xml</code> file contains the
Web Application Deployment Descriptor for your application. As the filename
extension implies, this file is an XML document, and defines everything about
your application that a server needs to know (except the context path,
which is assigned by the system administrator when the application is
deployed).
The complete syntax and semantics for the deployment descriptor is defined
in Chapter 13 of the Servlet API Specification, version 2.3. Over time, it
is expected that development tools will be provided that create and edit the
deployment descriptor for you. In the meantime, to provide a starting point,
a [basic web.xml file|http://localhost:8080/docs/appdev/web.xml.txt]
is provided. This file includes comments that describe the purpose of each
included element.
NOTE - The Servlet Specification includes a Document
Type Descriptor (DTD) for the web application deployment descriptor, and
Tomcat 6 enforces the rules defined here when processing your application's
<code>/WEB-INF/web.xml</code> file. In particular, you must
enter your descriptor elements (such as <code><filter></code>,
<code><servlet></code>, and <code><servlet-mapping></code> in
the order defined by the DTD (see Section 13.3).
h4. } from tomcat documentation
Tomcat Context Descriptor
bq. A /META-INF/context.xml file can be used to define Tomcat specific \\ configuration options, such as loggers, data sources, session manager \\ configuration and more. This XML file must contain one Context element, which \\ will be considered as if it was the child of the Host element corresponding \\ to the Host to which the The Tomcat configuration documentation contains \\ information on the Context element.
}from tomcat documentation
but I still want more information about this question:
Q3: I want to distribute (sell to another organaization) without give sorce code in jsp files.So I want to precompile it to be just class files or jar files.
I want to use ant that become with netbeans 6.1.can anyone give me information about how to do that.
thank you again

Question about size of ints in Xcode

Hello. I have a a few quick questions about declaring and defining variables and about their size and so forth. The book I'm reading at the moment, "Learn C on the Mac", says the following in reference to the difference between declaring and defining a variable:
A variable declaration is any statement that specifies a variables name and type. The line *int myInt;* certainly does that. A variable definition is a declaration that causes memory to be allocated for the variable. Since the previous statement does cause memory to be allocated for myInt, it does qualify as a definition.
I always thought a definition of a variable was a statement that assigned a value to a variable. If a basic declaration like "int myInt;" does allocate memory for the variable and therefore is a definition, can anyone give me an example of a declaration that does not allocate memory for the variable and therefore is not a definition?
The book goes on, a page or so late, to say this:
Since myInt was declared to be of type int, and since Xcode is currently set to use 4-byte ints, 4 bytes of memory were reserved for myInt. Since we haven't placed a value in those 4 bytes yet, they could contain any value at all. Some compilers place a value of 0 in a newly allocated variable, but others do not. The key is not to depend on a variable being preset to some specific value. If you want a variable to contain a specific value, assign the value to the variable yourself.
First, I know that an int can be different sizes (either 4 bytes or 8 bytes, I think), but what does this depend on? I thought it depended on the compiler, but the above quote makes it sound like it depends on the IDE, Xcode. Which is it?
Second, it said that Xcode is currently set to use 4-byte ints. Does this mean that there is a setting that the user can change to make ints a different size (like 8 bytes), or does it mean that the creators of Xcode currently have it set to use 4-byte ints?
Third, for the part about some compilers giving a newly allocated variable a value of 0, does this apply to Xcode or any of its compilers? I assume not, but I wanted to check.
Thanks for all the help, and have a great weekend!

Tron55555 wrote:
I always thought a definition of a variable was a statement that assigned a value to a variable. If a basic declaration like "int myInt;" does allocate memory for the variable and therefore is a definition, can anyone give me an example of a declaration that does not allocate memory for the variable and therefore is not a definition?
I always like to think of a "declaration" to be something that makes no changes to the actual code, but just provides visibility so that compilation and/or linking will succeed. The "definition" allocates space.
You can declare a function to establish it in the namespace for the compiler to find but the linker needs an actual definition somewhere to link against. With a variable, you could also declare a variable as "extern int myvar;". The actual definition "int myvar;" would be somewhere else.
According to that book, both "extern int myvar;" and "int myvar;" are declarations, but only the latter is a definition. That is a valid way to look at it. Both statements 'delcare' something to the compiler, but on the second one 'define's some actual data.
First, I know that an int can be different sizes (either 4 bytes or 8 bytes, I think), but what does this depend on? I thought it depended on the compiler, but the above quote makes it sound like it depends on the IDE, Xcode. Which is it?
An "int" is supposed to be a processor's "native" size and the most efficient data type to use. A compiler may or may not be able to change that, depending on the target and the compiler. If a compiler supports that option and Xcode supports that compiler and that option, then Xcode can control it, via the compiler.
Second, it said that Xcode is currently set to use 4-byte ints. Does this mean that there is a setting that the user can change to make ints a different size (like 8 bytes), or does it mean that the creators of Xcode currently have it set to use 4-byte ints?
I think that "setting" is just not specifying any option to explicitly set the size. You can use "-m32" or "-m64" to control this, but I wouldn't recommend it. Let Xcode handle those low-level details.
Third, for the part about some compilers giving a newly allocated variable a value of 0, does this apply to Xcode or any of its compilers? I assume not, but I wanted to check.
I don't know for sure. Why would you ask? Are you thinking of including 45 lines of macro declarations 3 levels deep to initialize values based on whether or not a particular compiler/target supports automatic initialization? Xcode current supports GCC 3.3, GCC 4.0, GCC 4.2, LLVM GCC, CLang, and Intel's compiler for building PPC, i386, and x86_64 code in both debug and release, with a large number of optimization options. It doesn't matter what compiler you use or what it's behavior is - initialize your variables in C.

Question about PL/SQL Function in report

Hi all. I have a (basic) question about using a PL/SQL function in a report. In my report page I have an item (PL/SQL function) that has the following syntax:
return username from t1
where username like 'Le%'
I reference this item in an email process. Ideally this function would return all usernames that begin with 'Le' in the drafted email; however, its not looping so I'm only getting a return on the first name.
I have a few books on PL/SQL but I'm not exactly sure where to start - I imagine there is a loop process I need to integrate into the function but, like I said, I'm not sure.
I would have posted this to the PL/SQL forum but also wanted some feedback on whether or not using this method is the best way forward. Essentially I have a table with usernames and just want to send email messages based on some simple logic.
Thanks!
Len

Hi Sergio,
First, it's an honor to have you reply to my post. Thanks!
To be more specific,
T1 is a table containing the results from a user security scan. Username is a column in this table containing user names. What I have done is create a page in HTML DB with the following elements:
1. An 'Item' containing the PL/SQL function that is hidden. The purpose of this Item is to generate information from T1 that meets the simple logic parameters - in this case, the user names that begin with "Le". I have called this Item P145_TT
2. A 'Process' containing references to HTMLDB_MAIL. The 'Process' looks similar to this:
HTMLDB_MAIL.SEND(
P_TO => '[email protected]',
P_FROM => 'Anon Email Account',
P_BODY => 'Note: This message was automatically generated. Do not attempt to reply to this email.
These are the users that begin with Le: '||:P145_TT||' ',
P_SUBJ => 'Summary');
3. A 'Button' to submit the process and (hopefully) send the message containing all users that adhere to the logic in the function.
4. If I use 'return username from t1...' I will get a username generated, but like I said previously, it only gives me the first and does not loop.

I have a question about using adobe CS files in CS6 edition

I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

donrulz,
Are your Edit>Color Settings the same?
Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

Question about book chapter

Similar Messages

Maybe you are looking for