Question About Broken Link
How do I determine the cause of an item being placed in the broken link list after doing a site check?
Rick and Ben:
You have been very patient with me
Guess at 81 I am starting to lose it - the code and screen shots I put in my email apparently did not make the trip
I will study how to use the forum tools and get back to you if I grasp the procedures required
Thanks again
Tom
Date: Thu, 19 Dec 2013 07:49:50 -0800
From: [email protected]
To: [email protected]
Subject: Question About Broken Link
Re: Question About Broken Link
created by Rick Gerard in Dreamweaver support forum - View the full discussion
You are trying to post code from an e-mail, that won't work. You ahve to be on the forum and use the tools there to post code.
Copy and post the suspect code and we can help. Otherwise we are completely guessing.
From what Ben says you have a typo or some missing files on your server.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5944607#5944607
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5944607#5944607
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5944607#5944607. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
Similar Messages
-
What do I do about broken links?
iTunes is all of a sudden telling me that the "original file cannot be located" on my entire library of nearly 700 tracks. is there a way to fix this without relocating each track individually? If not, is there a way to clear all the broken links out of the iTune window and start out fresh? I have tried uninstalling and re-downloading iTunes, but that did not fix my problem. Thank you for your help!!
Wait until it shuts off due to low battery, then charge it back up.
-
Question about the links that include parameters...
Hello,
I use this:
<a href="inserer_devis.jsp?firstparameter=<%= rs.getString(1)%>&secondparameter=<%= rs.getString(2)%>">to have a link that gives parameters to the other JSP.
My question is:
On the other JSP, when I use request.getParameter("firstparameter"), what is the thing that I get: is it a string, a char, ...??
And how can I convert it to a float or an int?
I have problems with integer.parseint() and float.parsefloat(), it tells me "NumberFormatException: null". The compiler thinks that my parameter is not a good int (or float).
Thank you.
Romain.</a>Request.getParameter always returns a String (see the javadocs).
To convert a String to an int use Integer.parseInt(StringToParse);
To convert a String to a Float usse Float.parseFloat(StringToParse);
just see the javadocs for more information -
Questions about updating linked .ai files
I have two questions regarding linked images.
(1) Sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save the changes in Illustrator. In other words, I do not need to update the link in the ID links panel. Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links panel to see the changes. Is there a reason why this happens, and is there an easier way to update images than the links panel. In Quark, I could just double-click on the image and a dialog box would ask if I wanted to update the image. This isn't a big deal to me, but I thought I'd ask.
(2) Whenever I make a change to an .ai file, the linked image in InDesign always re-scales, and I can't figure out why it does so or how to make it stop doing this. For example, I placed a bar chart made in Illustrator in a frame and adjusted its +x and +y values. It came in at 100% scale and I did not change that. Then, I had to make a change to a text label on the chart, which made the graph slightly smaller. When I updated the link in InDesign, it was re-scaled to 118.12%. I had to go into the +x field in the control bar and type in 100% to get it back to the scale it was before. Is there a default setting I need to uncheck to turn this feature off? If not, is there by chance a simple keystroke that will let me re-scale the image quickly?
Thanks in advance for your help!1. It sounds like you sometimes select the art or thename of the link and choose "edit original" and sometimes you just open the art and make changes. If you tell ID to edit original it updates at the save.
2. There are two options, depending on version, for the relink behavior and scaling. In CS5 (and CS4 if I remember correctly), you have a choice between them inthe prefs, in earlier versions it's one or the other, depending onthe version. One option is to preserve the dimensions, which is wha'ts happening to you. The other is to preserve the scale. Exactly how preserving dimensions behaves depends, too on the cropping options you used when placing the .ai file. If you cropped to aret or bounding box, for example, changing the size of the art or removing a stray point affects the art or bounding box, but cropping to media would not change. -
Question about Illustrator links in Indesign
Hello all,
I recently had a job from a customer that contained many links of company logos in which the fonts weren't outlined.
As I understand it, fonts from IL links are not collected when using the package function in Indesign....is this correct?
I didn't have most of the fonts for the Illustrator links, so they were substituted when I open them in Illustrator, however when I open the Indesign document and link the Illustrator links, they appear correctly.
When I open the links panel in Indesign, it shows the format of these .ai files as adobe PDF not .ai(or .eps as several of the links are).
What is happening here?
Is it safe to ignore all the font warnings and just link them in indesign?
Thanks, Billimarcr2 wrote:
I am going to do some testing on some trial files on my end.
Part of the problem stems from my client not using Suitcase or equivalent for font management. She has all the fonts needed in font book.
I don’t see how that is relevant. Font Book can install and activate/deactivate fonts as well as any other program. It’s just not built with an interface that is suitable for large libraries or frequent installation/activation/deactivation.
This job has about 15 company logos in it, most of which contain several fonts. When the client packages the job, she probably isn't even aware that the fonts from the illustrator files are not being collected.
Most logos have no fonts, and I suggest you do the same with yours. Convert the text in the logo to outlines and use that. Keep a master file with the text for further editing. I have worked at large design agencies where we keep a library of hundreds of fonts for clients and event sponsors. All type is outlined.
For this job, I was searching for the logos online from the individual company websites to assure the logos appeared correct
That is a good idea in theory, but finding the companys’ official approved logo files online is usually a wild goose chase. You can also try to contact someone at the company to see it they will provide you with a logo file, but that works about as often as Bullwinkle pulling a rabbit out of a hat.
My trick: search the website for PDF files. For abcd.com, I would google +site:abdc.com +filetype:pdf and look for vector logos in brochures, product sheets, or documentation. For larger companies, look for Investor Relations and download annual reports or quarterly reports. You may get the logo, possibly in black only or RGB instead of CMYK, so the colour might be off. You also won’t get a GSM (graphic standards manual), which explains guidelines for sizing, positioning, background colours, and spacing requirements. -
Hi --
I have a client who is quite proactive in updating the site
-- on average
once per month. When the changes are fairly extensive I
upload the entire
site to a test directory on their server so they can review
the changes at
their leisure. Here's my problem...
I'm using a number of includes on the site's pages --
secondary nav, list of
services on each page, footer. (Here's an example:
http://www.catenion.com/about/about_catenion.shtml).
When I upload the site
to that test directory the links in the includes don't
reflect the new
location on the server. They continue to point to the pages
for the live
site. How do I get the links in the various includes to
reflect this
change??
Below are the steps I took in loading the site to the test
directory. Can
someone let me know if I've overlooked something?
All links in the includes are relative to the site's root.
In the site's definition dialog...
changed the HTTP Address to reflect the change:
from:
http://www.catenion.com
to:
http://www.catenion.com/catenion_test
Also changed the host directory to point to the directory
"catenion_test".
When I click "OK" the site's cache is recreated. The I upload
the site.
What am I missing?
Thanks,
JohnI would use document relative links instead of site-root
relative links
here. I use includes with php and coldfusion all the time,
and when using
document relative links, as long as the relative location of
the files does
not change the includes will work. So if you create a folder
"test" on the
remote server and upload the everything relevant into this
folder
maintaining the relative location of those files, the links
should work
within this folder and the includes picked up will be those
that are within
this folder. The link of course would not have an absolute
path such as
http://www..... Instead it'll be a
relative path <?php
require("navmenu/nav.php")?> rather than <?php
require("
http://www.mysite.com/navmenu/nav.php")?>
There are pros and cons of using document relative links but
thats another
discussion.
Hope this helps.
You cannot lose until you give up !!!
"Tarvardian" <[email protected]> wrote in
message
news:[email protected]...
> Hi --
>
> I have a client who is quite proactive in updating the
site -- on average
> once per month. When the changes are fairly extensive I
upload the entire
> site to a test directory on their server so they can
review the changes at
> their leisure. Here's my problem...
>
> I'm using a number of includes on the site's pages --
secondary nav, list
> of services on each page, footer. (Here's an example:
>
http://www.catenion.com/about/about_catenion.shtml).
When I upload the
> site to that test directory the links in the includes
don't reflect the
> new location on the server. They continue to point to
the pages for the
> live site. How do I get the links in the various
includes to reflect this
> change??
>
> Below are the steps I took in loading the site to the
test directory. Can
> someone let me know if I've overlooked something?
>
> All links in the includes are relative to the site's
root.
> In the site's definition dialog...
> changed the HTTP Address to reflect the change:
> from:
http://www.catenion.com
> to:
http://www.catenion.com/catenion_test
> Also changed the host directory to point to the
directory "catenion_test".
> When I click "OK" the site's cache is recreated. The I
upload the site.
>
> What am I missing?
>
> Thanks,
> John
>
>
>
>
>
> -
Question about Dynamic Linking from Premier Pro
I have a number of sequences created in Premier Pro CS5.5 that I have linked into a project in Encore CS 5.1 via the "Dynamic Link" feature. My question is - if I make any adjustments or changes to those sequences in Premier Pro, will those changes be automatically transferred to the corresponding timelines in Encore? If not, how do I make that happen?
Jeff's answer applies to each dynamic linked sequence you transcoded after in Encore. For any sequence not already transcoded, changes will be automatic.
The exception is markers. If you change markers, including markers that shifted on the Premiere timeline because you deleted or added clips, changed duration, etc, you must select the sequence's timeline and select Edit -> Update Markers From Source (replaces all markers). -
Portal Unstructured Template Question About Edit Links
Hi, I have an unstructured template that I'm making. If I want to use an image for my edit link instead of using this #PAGE.EDITPAGE.LABEL#
How would I block someone who is not allowed from editing a page from seeing the image?Hi Lorenzo,
you can create a new ivew based on the component com.sap.km.cm.navigation or just copy the iView <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e8/e1401acdfd11d5994200508b5d5211/frameset.htm">Link List</a> located under "Portal Content / Content Provided by SAP / End User Content / Standard Portal Users / iViews / com.sap.km.iviews" and add it to your portal page.
Here you find more information about <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/b6/29892e91601940bb7a2cd673a1dff5/content.htm">KM Navigation iViews</a> in general.
After that you go to "Organize Entries" and create some links via Links(Context menu) -> New -> External Link (Internal Links are lins to documents or folders inside KM).
The last thing you have to do is to set the correct permissions. For that you go to "Content Administration -> KM Content -> documents / Links" where you should see your created links and use the context menu to go "Details" -> "Settings" - "Permissions". Remove the group everyone and add the group of users who should be the only ones to see the link.
Do this proccess for every link and you should be done.
Hope this helps,
Robert
PS: Feel free to use the colored stars as another way of saying thanks. -
Question about lost linked files
I have an illustrator PDF with a linked photoshop PDF as the background, but have lost the linked file on my HD. The background image still appears when I open the illustrator PDF in acrobat and photoshop, but not in illustrator because it cannot find the linked document on the HD. Is there a way to extract the background from the illustrator pdf, so I can have a file of just the background that I can then re-place on the illustrador PDF?
When you open the PDF in Photoshop, the dialog should have two tabs. One should be Images. See if the image shows up there. If it does have Photoshop open that image and resave it anywhere you want and then relink it.
-
I'm working with a 3D PDF. I'm interested in having a link only appear/be active when I click on a button, is there a way to do this (possibly via java script)? I have a button that flys to a view which has a comment with arrow pointing to an object. I would like the comment box to be where the link is placed, I just don't want to have the link there all the time, only after the button is pressed. Any help would be great, thank you.
What are you using to work on that PDF file - Adobe Acrobat? If so, it would be better to ask in the Acrobat forum.
-
Approval in two days -- question about direct link to store
My first iBook was approved in two days, but I have what is probably a simple question but I can not find the answer anywhere.
I want to get a url to direct people to the book, how do I get this?I knew it would be simple, but very valuable info. Thanks KT.
Here is is
<a href="http://itunes.apple.com/us/book/beyond-ellis-d/id531625572?mt=11&uo=4" target="itunes_store">Beyond Ellis D - Donnell Alexander</a> -
Dbms_job: question about broken jobs
Hi.
I have defined the following job:
VARIABLE jobno NUMBER
BEGIN
DBMS_JOB.SUBMIT (:jobno,'test_proc;',SYSDATE,'SYSDATE + 5/86400');
COMMIT;
END;
When the procedure is invalid the job queue tries to start it 16 times and marks the job as broken.
Is there an option that dbms_job does an automatic recompile of the procedure after the job has the broken status?
Thanks
Markusyou could do a two-step job to compile the proc, then execute it.
VARIABLE jobno NUMBER
BEGIN
DBMS_JOB.SUBMIT (:jobno,'BEGIN
ALTER PROCEDURE test_proc COMPILE;
test_proc;
END',SYSDATE,'SYSDATE + 5/86400');
COMMIT;
END; -
Hi, all.
I have setup a quick link on a page by just modifying the property. The quick link does not work until I attach it to a workset. Is there a reason of this behaviour?
I thought as long as the user has access to the page and iview, he should be able to see the quick link.
Thx.Hi, Fabien.
I have already tried those options and still not getting it to work. Any other idea?
Thx. -
Hi all
If the target server's IP change, do I have to re-create DBlink in Host server?
or I just change IP on tnsnames.ora ?or I just change IP on tnsnames.ora ? Yes. And do tnsping to the server for cross check.
Regards,
Sabdar Syed. -
Question about D-Link DGS-3620-28SC
Can anyone recommend a program that will enable me to track Car expenditure and Mileage. I have an accounting program where I can record the costs and items purchased every year. What the program lacks is the ability to track when things are due for replacement such as car is now approaching 40 000 miles - possibly need to replace Brake Discs and front tyres. It also currently does not track mileage.
Requirements are as follows:Car is personally owned, so I need to track for personal use. However I do use the car for business mileage. It would be fantastic if I could input the miles between my home and my clients and between clients inot the program once so that all I have to do is say went to client a and client b today and it tracks the appropriate mileage. Mileage is a huge pain to track because I obviously use the car for personal...Zscaler raises $100 million
Business Standard
Zscaler Inc, a San Jose-based Internet security start-up, has raised $100 million in a new round of financing, led by private investment firm TPG, with participation from existing investors EMC and Lightspeed Ventures. As part of the new investment ...
Read More
Maybe you are looking for
-
Standard report for unit of measures
Is there any standard report to see the Fert material unit of measures and its alternate unit of measures.
-
Variable substitution in error message
I'm trying to create a document that contains generic error messages in a module used by different projects. I intended to share the messages by including them as a variable substitution within the error message e.g.: Error("%message_dob_in_future%")
-
Unable to create BI JDBC connection in JDeveloper
I'm trying to follow the steps in http://docs.oracle.com/cd/E28271_01/bi.1111/e10545/sql_bi_view_object.htm#BHAFJIHC to create JDBC connection. But when I click on Test, it shows Working.. and never returns with success or failure messages. username:
-
The orange light has been flashing for a couple days, and even if I unplug everything (Time Capsule & modem) and plug it all in again, still the flashing orange light. I'm sure it should be solid green. The internet connection seems to be working fin
-
Multiply effect and overprint both applied causing color increase on box underneath?
Recently had a file print that contained a black only gradient ranging from 0 to 25% it was set to multiply and also to overprint. Underneath thegradient was a box filled with C0, M79, Y100, K0). End result was the magenta was bumped up to