Question about C-panel & Spiceworks

Hi geeks. Any info on runnung or how to install Spiceworx on a cpanel server or domain?
Basically I would like my .co.za domain to host my Spiceworks and not my local pc
This topic first appeared in the Spiceworks Community

Similar Messages

A question about control panel.

Click the up arrow on the control panel,then,pop up the subpanel.I want to create a password dialog before pop up the subpanel,only you put the right password,the subpanel was popped up.
what shuold I do?thank you.

Hello, I'm interested by your question JSL because I meet quite the same problem with my HP HDX 16 1050 EF with Vista Home Premium SP2 64-bit.
With the first audio drivers that came with the computer, I couldn't disable SRS settings because Windows sounds were totally distorded...
And when I left default parameters, many musics were saturate because of the SRS...
I've updated IDT Audio to v1.0.6225.0 (july 2009) via Windows Update. There are no more SRS but Dolby Natural Bass. Now I can disable it without any sound problem but each time I plug headphones or restart computer the dolby natural bass option light on...
How can I disable it definitely ?
Please help us !

Question about openbox panels

Right now I'm using openbox with XFCE applications (I was running just XFCE, but I didn't need all of the extra things, like xfdesktop, etc, and this dropped my memory usage almost 200MBs!), but I'm still running xfce4-panel because of 1 thing. Clipboard Manager. I was using fbpanel until recently, but I've grown too attached to the clipboard manager, that I can't really do without it. Is there either a separate program, or another bar that using a clipboard manager?

heleos wrote:(I was running just XFCE, but I didn't need all of the extra things, like xfdesktop, etc, and this dropped my memory usage almost 200MBs!)
Well that's pretty bizarre, because I'm sat here in XFCE now, with firefox open and only 80 MB of my memory is being used in total. Let's go one better... no desktop environment, 20-30 MB, XFCE with no firefox, 60 - 70 MB and now 80 with firefox. I can't see how you've saved almost 200MBs by not using XFCE, when XFCE doesn't take even half of that amount. I don't even think KDE and Gnome would take up that much of your memory, but who knows?
Anyway, just wanted to point that out, so you don't mislead others into thinking XFCE's some bloated gnome/kde type DE.
Last edited by steven (2007-07-20 15:08:51)

Question about the custom panel language

I have a question about the custom panel language...
The document you provide seems to lack details on some features. Namely the icon and picture widgets. I see from looking at the examples and other vendor's web pages that these features exist, but I don't find any detailed descriptions of them in the documentation. Is there a more complete document describing these and other features...
http://www.adobe.com/products/xmp/custompanel.html
Alternatively, can someone fill me in on the syntax and options for at least the icon and picture widget. For instance, how do you load external icons or pictures...
Tom

Gunar,
It could be interesting to have something like
icon(url: 'http://www.adobe.com/Images/logo.gif', width: 20, height: 20);
or better
picture(url: 'http://www.adobe.com/Images/logo.gif', width: 20, height: 20);
for the pictures and
include(url: 'http://www.adobe.com/xml/custompanel/camera1.txt');
for include the cusmtom panel's dynamic portions
Juan Pablo

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

A few questions about Patone colors

I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.

You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+)

Few questions about difference between Satellite P70 , L70, S70

Hello, i have many questions about the series P70 , L70, S70 that come with a 1920x1080 panel.
1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it ?
3) Do all three (P70, L70, S70 series) come with the same TFT Panels ?
4) Which of the above series supports mSata ?
5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
6) All of the above, come with a S-ATA II or S-ATA III interface ?
7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
Thank you in advance.

>1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
What Sat L70 and S70 models do you mean exactly? There are different L70-xxx and S70-xxx models on the market which supports different hardware specifications.
>2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it?
As you can see in this [Sat P70 HDD replacement document,|http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports 2nd HDD bay BUT even if there is an 2nd HDD bay this does not mean that you could use 2nd HDD. In case the 2nd HDD bay would be equipped with HDD connector, you could use the 2nd HDD
I found also the [Sat L70/S70 HDD replacement |http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] document on Toshiba page and there I can see that 2nd HDD bay is not available
> 3) Do all three (P70, L70, S70 series) come with the same TFT Panels?
See point 1). Different P70, L70, S70 models were equipped with different hardware parts.
> 4) Which of the above series supports mSata?
As far as I know only some P70 models are equipped with an 256GB mSATA-SSD.
> 5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
See point 4) not all models supports the same hardware specifications
> 6) All of the above, come with a S-ATA II or S-ATA III interface ?
I dont think that SATA III is supported. I guess it would be SATA II
> 7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
Not easy to answer because there are too many models released in Europea.
And not all models are available in each country. So I guess you will need to look for models which were released in your country.

Few questions about cs6

Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheers

mantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel

Some questions about importing HTML files

Hi, folks
Let's suppose we want to import a pack of HTML files formatted in HTML5 wit's it's CSS into a double-oriented folio. A couple or three questions about that, please:
1. Is there a limit for a reasonable quantity of HTML files I can import into a folio? I mean.. 100 would be way too much, for instance?
2. These HTML files could be navigated and referenced from inside TOC-pages made in InDesign,right? (navto://..., I gues?)
2. Will it be possible, by means of HTML adaptative design techniques, to treat both orientations (vertical and horizontal) as different viewports or screen sizes so that the design adapts for instance the column width with its CSS?
3. That said, will the InDesign final app. respect that adaptative CSS rules?
I am asking this because we are looking for a way to inject big quantities of content with a very similar design into our application in a really fast and automatizable way and I have the suspicion* that importing HTML5 preformated CSS files could be the a very good and simple alternative to importing XML into InDesign templates as we start out content as tagged almost-html files.
Thanks a lot
Gustavo Sánchez (Posting from Madrid)

I assume you are asking about using HTML articles.
1. There is no limit beyond simply keeping things reasonable.
2. Yes. Just use navto://articlename
3. Yes. I've used min-width of 768 and max width of 1024 to control it.
4. InDesign does not enter into any of this with the exception of using the folio builder panel. Everything else is done in Dreamweaver or whatever program you decide to use for the article.
If you want to restrict the HTML articles to one orientation or the other, use the _h and _v suffixes.
Bob

Questions about Audigy 2 ZS connecti

Hello,
New to these forums, so bear with me. I'm considering purchasing an Audigy 2 ZS gamer card, and have some questions about the card and speaker setup. I've read the FAQ's in the forum, and they have been a big help, but I still have questions related specifically to my setup. Here's the system specs:
AMD Athlon 64 3000+
Asus K8V SE Deluxe
VisionTek Radeon X800 XT PE
Seagate 250 gig SATA HDD
gig Crucial ram
Antec P80 case
Antec TruePower 430 ps
Altec Lansing ADA885 digital speakers (awesome sound)
Altec Lansing headset (cheap but works for voice and gaming)
ADI AD980 onboard sound
Windows XP Home
. I currently am able to run both the speakers and headset at the same time by using the front panel audio outlets on the case (helps with the immersion in IL2 946). I would like to continue doing this(using front panel audio) with the new card. I've found several places that have an adapter cable for sale, http://www.x-tap.com/
http://www.performance-pcs.com/catal...oducts_id=2700
http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english_add,U={B8F6030-DA4F-D3-94F4-00500463020E},Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},d=3025443648,VARSET=ws:http://us.creative.com,case=5764
The plug that I have has only 3 separators, not 4. Will this work with the Audigy 2? I don't have a link for this plug, unfortunately.
4. I had been considering purchasing? a set of USB headphones, but I've been told that when you plug them in, the sound is cut off for the speakers. If there was a workaround for this, I might consider getting them. Then I wouldn't have to use the front panel audio or the connections on the card.
5. I've heard of an issue with this particular set of speakers and the Audigy 2 card, particularly that the speakers were originally designed for a Dell system, and the wiring was phased differently than in other systems. Is this something to be concerned with, and if so, is there a workaround?
I like to research a particular product before I buy it, in order to make an informed decision and avoid problems if possible. Sometimes it works, sometimes it don't
Thanks in advance for the help.
Message Edited by mrj_455 on 03-05-2008 05:28 PMMessage Edited by mrj_455 on 03-05-2008 05:32 PM

The inputs are easy to find and select:?
Right-click the Mixer icon on the taskbar and select "Playback Devices".<
There should open a new Window with the options of "Speakers" and "SPDIF"<
With Speakers highlighted click the?"Properties" button on the lower?right corner<
Go to the 4th tab (I believe it is "volume" in english, "Pegel" in german)<
There you have your inputs!<
Unmute Line-In and set its volume according to your desires.<
Also remember that software designed for XP, that should control the Line-IN settings, (ie. Hauppauge WinTV or Dscaler) will be unable to do so in Vista, do to the architecture change. You can however enable "Compatibility Mode for Windows XP SP2" for these applications (right-click on their executable) and restore control of the inputs directly from the program. (You should however unmute it first as explained above). PS:? All Creative Software that came on the CD is incompatible to Vista. Only the included Audio Console should work as expected.Message Edited by alexs3d2 on 05-07-200707:3 PM

Some question about communicating the usb RAW device

I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data                       Info           Time   Cmd.Phase.Ofs
15 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc        56.1.0
14 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR   11us        57.1.0
14 USTS   00 00 01 c0                canceled       2.0sc        57.2.0
15 USTS   00 00 01 c0                canceled         5us        56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!

逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time   Cmd.Phase.Ofs     ---
----- ------------------ 15
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0        14
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR   11us
57.1.0        14
USTS   00 00 01
c0
canceled
2.0sc
57.2.0        15
USTS   00 00 01
c0
canceled
5us        56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

A question about comments

Hi, all,
I have a question about the comments:
Program function comments should be included on the block diagram or Front panel, or both. Thanks.

Many good things have already been mentioned.
For the Front panel, there should be a clear distinction between toplevel VIs (or any subVIs where the user must interact with the front panel), and subVIs where the front panel is only of interest to the programmer. The needs here are quite different:
User Interface VIs
The front panel should be clear and easy to use. All "help" elements, tip strips, etc are geared towards the end user. The icon is irrelevant, because it is typically not even shown. Everything of interest to code maintenance should be on the diagram.
subVIs
Here, the front panel can contain a description of what the subVI does, who created it, company and copyright information, version information, limitations (e.g. input A must be >0), URLs or literature references to the algorithm, etc. (Have a look at any of the openG tools!). The "VI properties...documentation" section should be populated. The icon should be descriptive. All controls and indicators should have intuitive names (not just "Numeric 4", or "Array" )
Comments specific to certain areas of the code should be placed where they apply, especially if the code uses some exotic algorithm that would make the code hard to interpret.
Use a programming style that is self-documenting. (e.g. Don't unbundle the error cluster check for "equal zero" to switch a case statement. Wire the error cluster directly to the case so you'll get a red/green error case structure. Much more obvious!)
If these are proprietary VIs with password protected diagrams You should split the comments: Anything of interest to the non-privileged user goes on the front panel, anything else on the diagram.
In the end, it does not really matters where you place the comments as long as they are easy to find later and still make sense to somebody else 10 years from now. Message Edited by altenbach on 05-30-2005 01:13 PM
LabVIEW Champion . Do more with less code and in less time .

A question about cluster

Hi all,
I have a question about the usage of cluster. I create a cluaster
which includes three indicators on the front panel, but I can't use
unbundle function on the diagram. If I change the indicator to control,
it works. I didn't find on the manual that the unbundle function only
accept cluster of control as input.
Thanks for your help!
Regards,
Tao

This is because of the way dataflow programming works. It probably didn't
explicitly mention.
Labview has data sources (controls, inputs) and data sinks (indicators,
outputs). Unbundling accepts cluster as input and outputs the individual
pieces of data. Similarly bundling accepts individual pieces of data as
input and ouputs a cluster. So logically your cluster must be a control
(input) for unbundling, and an indicator (output) for bundling.
If I'm misunderstanding the question or oversimplifying the problem email me
or post again.
-joey
"tsong" wrote in message news:b11154$qmq$[email protected]..
> Hi all,
>
> I have a question about the usage of cluster. I create a cluaster
> which includes three indicators on the front panel, but I can'
t use
> unbundle function on the diagram. If I change the indicator to control,
> it works. I didn't find on the manual that the unbundle function only
> accept cluster of control as input.
>
> Thanks for your help!
>
> Regards,
>
> Tao
>
>
>

A question about Accordion in Muse on positioning

A question about Accordion in Muse - e.g. I put an Accordion a web page with an anchor position and use a menu button to point to the location. However, when I resize the browser such that it is narrower than before, the Accordion actually moves towards the left side when I use the menu button to go to the Accordion. I don't want this, in fact, I would like the Accordion maintains a certain distance from the left of the browser's edge, instead of from the right. Could you please help?
Perhaps I am not decsribAn example is from the Site of the day: http://corlessmason.com/#portfolio, when I resize the browser narrower, the panel of pictures maintains its position and it's only being cropped off, instead of being pushed towards the left - that's pretty much I would like to achieve.
Thank you.

actually I found the solution:
Muse Vertical Website Shift
it works perfectly now!

Question about sample-freque

Hello,
I want to know what's the effect on the music of changing the sampling frequency, as my music collection is 'standard' 6-bit 4400/48000Hz sound. Does upping the sample frequency/bit-depth give me any advantages or maybe disadvantages for my music-quality?
I guess this is a pretty noob question for the experts, but I'm like not into sound hardware and stuff, I'm the type of guy that just wants good overall sound quality, while not spending too much money (just a nice soundscard + some decent speakers).
Below is a screenshot that shows the setting I'm talking about (control panel --> sound --> properties of Speakers (I've renamed it to amplifier, as my card is connected to my amplifier) --> Advanced Tab)
<img height="653" title="settings" alt="settings" width="882" src="http://img37.imageshack.us/img37/5527/xfisa2.jpg">
(excuse my amazing paint skills)
Thanks in advance,
iDont

RejZoR wrote:
It does. Try playing CS:S with ALchemy and that setting in Vista set to 24bit and anything above 48KHz...
how the hell you get alchemy to work with cs:s.
for as far i'm aware it does't work at all.
also would't that alter files if in any case would work.
causing to trigger vac.
or unable to play unless servers are sv_pure 0.

Question about C-panel & Spiceworks

Similar Messages

Maybe you are looking for