Question about camera raw. Need to edit Canon 60D Raw files in CS5.

I downloaded the program camera raw. folder could not find the installer program. I do not know how to install the camera raw.in the past with these programs had no problems. what version of the program is suitable for Photoshop cs5 and camera canon 60d?

canon eos 60D needs cr 6.2 or better.
ps cs5 can be updated to 6.7 so you should be ok.
the best way to update is to click help>update in photoshop.

Similar Messages

  • I can not open canon 60d raw images on photoshop CS5.1? can not go to updates either- error?

    I can not open canon 60d raw images on photoshop CS5.1? the same program on stationary mac can open the same raw files, whereas new lap top can not? Why?  can not go to updates either- error, why?

    Which version of mac os x does your new mac have?
    What error do you get when going to Help>Updates in photoshop cs5.1?
    You might try downloading and installing the 6.7 camera raw update from here:
    Adobe - Photoshop : For Macintosh : Camera Raw 6.7 Update
    If you need any other updates, you can find most of them here:
    http://www.adobe.com/downloads/updates.html

  • Canon 60D RAW files and Apperture 3.0

    I have OS X 10.5.8 and Aperture 3.0. My new Canon 60D RAW files can not be seen either in Aperture or Finder. Is there newer version for Aperture or is it the OS X that is too old?

    Here is a list of raw formats supported by the current Aperture version:
    Raw Support for Leading Cameras: http://www.apple.com/aperture/specs/raw.html
    The current Aperture Version is AP 3.2.2., and to use the most recent raw support, you need to be running AP 3.2.2. and MacOS 10.6.8 or later.
    If you find your camera in the list of supported cameras, you might consider to update your OS, if your hardware does support the newer systems.
    Regards
    Léonie

  • Canon 60D RAW Photo Granulation in LR3 normal? Or is this a BUG?

    Hello, in most Photos from Canon 60D RAW is the Photo Granulation very high in LR3.
    Is this normal or is this a bug?
    This photo grain occurs immediately after the load on the RAW file without any aftertreatment.
    It looks as if the LR3 sharpens automatically.

    The noise granularity is normal when working with RAW files because this is how the data comes off the sensor.
    It can help to change your LR defaults to use a sharpen mask that is quite high.  I use 75.  The higher the sharpen mask the more distinct the edge needs to be before the capture-sharpening is applied.  Hold down the Alt-key while you adjust the Mask slider to see what is being sharpened and make it high enough that the general areas are not sharpened, only the edges.
    For lower ISOs, this noise isn't necessarily a big problem for ink-jet printing that already consists of little dots, and actually helps the export sharpening have something to bite on if you are resizing significantly smaller, but it can be a problem is you are cropping down instead of resizing and displaying images close to full-resolution.  In this case you'll want to adjust the Luminance slider up a bit more than normal. Don't go overboard with it, though.
    Having worked with RAW files for many years, I actually prefer my images to be a little grainy and don't like in-camera JPGs where things are smoothed out too much.

  • How do you get Raw images form a Canon 60D to open up on Photoshop Elements 9!

    How do you get Raw images form a Canon 60D to open up on Photoshop Elements 9! I tried downloading the Adobe Camera Raw 6.2 update and Elements is not recognizing the file to install!

    Go to Help>Updates in the editor and do it that way instead.

  • New Canon 60D RAW in Aperture

    In case anyone is still having probelms in working in RAW prior to Ap3 camera list being updated here is how i get around it. Download Adobe dng free converter. Load the Canon camera software that comes with the 60D.
    Import raw files from camera into the Canon software. Move those files to a folder on your desktop. Then open the Adobe dng converter and select the folder on your desk top conatining the camera RAW files. Convert the files in the Adobe converter. Then back in the Canon software drag all the converted files straight into the Ap3 icon. You now have a folder containing RAW files in Ap almost as good as original but not quiet. A long process so hopefully Ap3 will be updated soon with the 60D JohnT

    Answering myself:
    RAW compatibility support is not Aperture independent, it is a OS wide issue. To get support for Canon 60D RAW you must upgrade to Snow Leopard 10.6.5 as described here http://support.apple.com/kb/HT3825.
    I've just completed such upgrade and I can now see my RAW images in the finder (with quick preview). However, upgrading rendered my Aperture useless as launching it reports "Aperture can not be opened because of a Problem". Off to the forums... Feel like I'm setting up Linux here... Apple!

  • Adobe Lightroom 5.7 does not recognize Canon 60D raw files. I have Camera Raw plugin 8.7 installed. Is there solution?

    Neither Bridge CS6 or Lightroom 5.7 can recognize Canon's raw file (Canon Camera 60D).
    This only started a few months ago without any change that I made to the system
    Any clues?

    Sofia Pokrzywa wrote:
    Neither Bridge CS6 or Lightroom 5.7 can recognize Canon's raw file (Canon Camera 60D).
    This only started a few months ago without any change that I made to the system
    Any clues?
    Is this only when reading CR2 files on the camera memory card or also for CR2 files that were previously imported to your hard drive (i.e. ALL of your 60D CR2 files)?
    LR 5.7.1 is only at Camera Raw 8.7. so OK. What Bridge, PS, and OS versions are installed? In Bridge go to Help> About Bridge
    From inside Bridge launch any raw file and check the ACR version:
    From inside PS go to Help> System Info and check PS and OS version:

  • A question about Oracle 1g R2 Enterprise Edition license

    Dear all,
    I have a question about Oracle license and I would appreciate if you could kindly help me.
    I have installed an Oracle server (11g R2 Enterprise edition) on a linux virtual machine. The pc used for this purpose
    is my enterprise laptop (therefore a professional and not a personal Computer). However, I use the this Oracle Server
    only for learning purpose, that is, only for running the examples in my Oracle Press books (SQL, PL/SQL and some
    administration tasks) just for learning the stuff.
    There is absolutely no data related to my enterprise, stored or used on this server. Whenever I want to work with my
    enterprise data, I use the Oracle server of the enterprise which has of course the appropriate license. So as I said, I
    use this Enterprise server on the virtual machine only for running queries/programs in my Oracle Press books just for
    learning and I'm the sole person who uses this server (no remote connection for other users).
    The reason for which I needed to install this server on my PC was that our DBA couldn't provide a training environment
    for me with all required privileges and functionalities.
    Am I supposed to buy a license for this installed Enterprise server on my virtual machine?
    Thanks in advance,
    Dariyoosh

    drop.any wrote:
    From OTN license agreement:
    >
    LICENSE RIGHTS
    We grant you a nonexclusive, nontransferable limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application, and not for any other purpose. If you use the application you develop under this license for any internal data processing or for any commercial or production purposes, or you want to use the programs for any purpose other than as permitted under this agreement, you must obtain a production release version of the program by contacting us or an Oracle reseller to obtain the appropriate license. You acknowledge that we may not produce a production release version of the program and any development efforts undertaken by you are at your own risk. We may audit your use of the programs. Program documentation, if available, may accessed online at http://otn.oracle.com/docs.
    Ownership and Restrictions We retain all ownership and intellectual property rights in the programs. The programs may be installed on one computer only, and used by one person in the operating environment identified by us. You may make one copy of the programs for backup purposes.
    You may not:
    - use the programs for your own internal data processing or for any commercial or production purposes, or use the programs for any purpose except the development of your application;
    - use the application you develop with the programs for any internal data processing or commercial or production purposes without securing an appropriate license from us;
    - continue to develop your application after you have used it for any internal data processing, commercial or production purpose without securing an appropriate license from us, or an Oracle reseller;
    - remove or modify any program markings or any notice of our proprietary rights;
    - make the programs available in any manner to any third party;
    - use the programs to provide third party training;
    - assign this agreement or give or transfer the programs or an interest in them to another individual or entity; - cause or permit reverse engineering (unless required by law for interoperability), disassembly or decompilation of the programs;
    - disclose results of any program benchmark tests without our prior consent.
    >Hello again,
    Thank you both of you for your help. As it seems to me
    >
    We grant you a nonexclusive, nontransferable limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application, and not for any other purpose.
    >
    I think self training can be considered in this category, therefore I think there is no need to buy a license for that.
    Kind regards,
    Dariyoosh

  • I cant updated Camera Raw to accommodate my Canon 550D Raw images on CS4 - its saying "Could not complete your request because it is not the right kind of document" HELP!!!

    Ive tried downloading the latest version but then always brings up CS4 and says not the right kind of document...? ive tried going to Updstes in help and says all updated but I have version 5.0.0.178 of Camera Raw

    Adobe Camera Raw did not support the Canon 550D until version 6.1 for Photoshop CS5.
    The best way if you do not wish to upgrade is to download the 8.7 DNG converter and convert your Canon 550d raw files to dng so that Photoshop CS4 can open them in your version of Camera Raw.
    Where to get the DNG converter:
    Camera Raw 8.7 and DNG Converter 8.7 Now available
    How to:
    Camera Raw: How to use Adobe DNG Converter - YouTube
    Gene

  • Question about Camera/Premiere Settings for Slow Motion Video

    I'm new to shooting video with cameras that have manual options, so I'm not exactly sure how I should set up the camera settings. It's a Canon 60D. Basically in the video I want to make, I'd like to have a lot of normal speed to slow motion transitions. Some of the video footage will be very fast paced, so I'd like to slow it down as much as possible without making the video appear jumpy. I assume I should change the frame rate on the camera to 60 fps. Is there anything else I should adjust within the settings?
    I will be editing with premiere elements if you know of any additional tips for that.
    Thank you in advance!

    The speed of your camcorder doesn't matter. You can apply Time Stretch to any video clip.
    There's a limit to how much  you can slow it, of course. With that camera and Premiere Elements, you're not going to be able to slow down a water spray so you an see the individual droplets or anything like that. But, if you combine TimeStretch and Frame Blend, you should get very good results slowing your footage down a certain amount.
    How much you can slow it and still be satisfied with the results is kind of a judgment call. So I encourage you to experiment and see what your tolerance is.

  • Unable to Open Canon 60D RAW files in PSE9

    Since I got my new camera Canon 60D, I have not been able to open the RAW (CR2) files in my Photoshop Elements 9.  The ones from my previous camera I could. I have installed the Solutions software that came with the camera and have gone to both the Canon and Adobe sites to see if there is something I am missing. Do you have any suggestions for me?
    Message was edited by: Brett N

      Can you check which version of Camera Raw is installed - it needs to be version 6.2 or later for the 60D
    Open Full edit on the menu bar click:
    Help >> About Plug-In >> Camera Raw
    Press Esc to close the pop-up.
     

  • Canon 60D RAW files

    PSE 8 does not accept the RAW files of a Canon 60D and there are no updates for PSE 8. How can I load the RAW files in PSE 8

    You need to update the camera raw plugin:
    windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4810
    mac:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4809
    note: on macs this only updates the pse 8 editor camera raw plugin,
    bridge will still not read the files.
    MTSTUNER

  • Do I HAVE to upgrade to version 3 to see my Canon 60d RAW files?

    I have the student edition of Lightroom 2 and have loved it for my Canon Rebel. I recently upgraded to a Canon 60d and am unable to access my raw files.
    I really do not have the extra cash to shell out for an upgrade to version 3 at this point. Is there any other way for me to use and edit my raw files?
    Thank you!

    Support for the Canon 60D was introduced with ACR 6.2 (LR3.2. The work around would be to use the Latest DNG Converter to convert the raw files from your camera to DNG files. Then import the DNG files into Lightroom 2. and you will be fine. When you do the conversion its a good practice to retain the original raw files for use with your camera manufactures software, which will not work with the DNG copies. Also if you have not done so you should update your version 2 to the latest 2.7.
    The link for the DNG converter is here.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807

  • Photoshop C5 Raw: how to edit Nikon D4s Raw files in CS5?

    Please help me update my Photoshop C5 so I may view my RAW files taken by my new Nikon D4s camera.  I'm not able to find location to update.

    I assume you mean Photoshop CS5?
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The D4s was first supported in Camera Raw 8.4 which is only compatible with CS6 and later versions.
    So there is no update available to open D4s Raw files in CS5.
    Why doesn’t my version of Photoshop or Lightroom support my camera?
    Choices:
    Upgrade to CS6
    Join the Cloud
    Download the free Adobe DNG converter, convert all D4s Raw files to DNG format then edit the DNGs in CS5
    Photoshop Help | Digital Negative (DNG)

  • Canon 60D - RAW files not opening

    I have recently taken pictures with a Canon 60D and i am unable to open the raw files in ACR.
    I am running PS CS5 and have ACR 6.7.
    I have read forums which say that the 60D require 6.2 and yet i am still unable to view the files.
    Other applications as the Digital Photo Professional open them fine when i have downloaded the drivers for that camera.
    Can any one help?

    The raw file you posted is not corrupt; however, it is from a 650D which wasn’t supported in ACR 6.7.  See screen capture, below.
    Do you have a 60D file that doesn’t work that you can post?
    You could convert the 650D raw files to DNGs to process them in CS5/ACR 6.7, or upgrade to CS6/ACR 8.1 for $200, or subscribe to the creative cloud single-app, or perhaps expierment with Lightroom, with the longest timeframe would be available with LR 5.2 RC that expires Sept 30.
    CC:  http://www.adobe.com/photoshop
    CS6: http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ
    DNGC: http://www.adobe.com/dngconverter
    LR: http://www.adobe.com/lightroom
    LR RC:  http://labs.adobe.com/technologies/lightroom5-2/

Maybe you are looking for

  • IPod was working fine, then suddenly it began stopping mid song, when the screen goes dark, the music pauses. Why and how do I fix it. I already did a full restore.

    I used to be able to leave the music playing and put the screen to sleep by tapping the power button. Now that same tap stops the music. If I dont push the button, the music plays for about a minute and then pauses. If I keep the screen active, the m

  • Excise values error in migo

    Dear Friends,                 this is chandra shekar , here i had one problem in migo transaction excise values are capturing in wrong way for example the  material price is 100 rs BED is 8 % that is 8 rs when doing goods receipt for this material in

  • Scaling the cwgraph axis

    Hi Everybody, i´m new in here and i have a problem! So i´m using the PCI6014 card for my measurement and Borland Delphi7. I´m using a CwGraph to plot the measured graph from my pressure sensor. Now i would like to scale the axis: x-axis= Time (second

  • Darwin and problem with gcc

    Hi, I'm trying to compile c-programs with gcc installed with the xtools from the tiger 1.4.8-cd on my system. For the first step I tried a "Hello World" program. When I compile it with 'gcc HelloWorld.cpp' on a linux system I get a a.out, and this is

  • Row Repeater

    Hi All, I am having a requirment, where in, on action of a button i am displaying  a pop up. In this pop up i am having search functionality & after retriving the data if click on OK button of pop up the data should be displayed on my first screen. I