Question about changing the IP of a Windows DC, that is also acting as a DNS server?
I have two subnets (network A, network B) located within the same single Windows domain site.
Each site has two DCs, which each are running AD-integrated DNS.
I need to move one server from network B, into network A. If I change the IP address, subnet mask, and gateway and DNS entries on this server, shut it down, and then bring it back up on network A, should the server automatically register itself
in DNS under its new IP address, and behaving like a normal domain controller in the new subnet? Or will I need to perform an ipconfig /registerdns on the domain controller once it comes back up in network A, in order for it to be seen as a domain controller/DNS
server under its new IP address?
If you change the IP of the DC, the command isn't going to be a IPCconfig/RegisterDNS.
DC's register their essential records when the NETLOGON service starts, so restart that.
**Are your clients using DHCP? Are you sure you've eliminated the dependancies on that IP address for all your clients?
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**
Similar Messages
-
Questions about changing the graphic card
Greetings I need to change the graphic card that came with my computer Pavilion 500-308nrit's GeForce GTX 745 4Gb with GeForce GTX 960now i have couble questions the graghic card that i'm going to buy has a bigger cooling system so is't going to fit inside the case?the GTX 960 require a minimum power supply with 400W so is't gonna be a problem if i changed the power supply?. and is there is a specific power supply that will work better with my PC? and thank you
Hi, The specifications for 500-308nr indicate an external 180 watt power supply supply. Is that true? If the specifications are correct then you will not be able to install an internal power supply.
-
Question about changing a Snow Leopard Server network settings
We have an Xserve running Mac OS X Server 10.6.8, the primary services running on it are afp, smb, dhcp, dns, jabber and the calendar sever.
Right now we have a router connecting two networks together, 192.168.0.0/24 and 192.168.1.0/24. The Xserve has a static IP address in the 192.168.0.0/24 range.
In order to combine two phone systems into one I am required to combine the above networks, this will involve removing the router and changing the subnet mask on every device from 255.255.255.0 to 255.255.254.0, any device that is currently part of the 192.168.1.0/24 network will also need to have it's router setting changed from 192.168.1.1 to 192.168.0.1. That part should all be easy.
However, this is my first experience expanding a network past a standard class C and am wondering if there is anything I need to watch for on my Snow Leopard Sever.
Specifically I wonder about dhcp settings, right now there are two dhcp servers, the Xserve which provides dhcp for 192.168.0.0/24 and the router that provides dhcp for 192.168.1.0/24. Once the router is removed the Xserve will need to provide dhcp for the entire network.
Looking at the Xserve dhcp configuration right now I have one subnet defined providing addresses 192.168.0.5 to 192.168.0.125.
Can I simply click the + to add another subnet and add for instance a range of 192.168.1.5 to 192.168.1.125?
Will it simply give out all of the ip addresses in the first range and then start with the 2nd? Or do I need to find a single range of ip addresses large enough to meet my needs? (e.g. 192.168.1.5 to 192.168.1.225 or something).
Is there anythign else to watch for after making this type of network setting change?
Thanks in advance.Thank you for your very detailed reply.
I understand the problems that can arise using 192.168.0.x and 192.168.1.x and if this were a new project I would definitely switch to something else, however in this case we have been using these ip ranges for years (they were in use here long before I started) and I don't want to have to redo all of my dns settings at the same time I make these other changes so I'm going to stick with the same ip's we are using at least for now. Anyone here needing vpn access has already dealt with this issue but we have very few vpn users so it has not been a major problem for us to date.
My biggest question is about increasing the size of the dhcp pool. For instance, after I change all the network settings and set up a /23 network is it possible to have a single dhcp pool that includes some ip's in the 192.168.0.x range and others in the 192.168.1.x range? I guess what I am asking is when I am in Server Admin and click on DHCP one of the tabs across the top is "Subnets". Right now there is a single "subnet" configured that provides addresses from 192.168.0.5 to 192.168.0.125.
Ideally I would like one dhcp pool that provides ip's in the range of 192.168.0.5 to 192.168.0.125 and then if all of those are used up, moves to 192.168.1.5 to 192.168.1.125. Can I do that by simply adding another "Subnet" so there are two? Or do I have to find one larger single range? (e.g. 192.168.1.5 to 192.168.1.225?) You may have already answered this indicating I have to have a single larger range but I just want to be sure.
The parts about changing subnet masks, and routers and all that I think I have a pretty good understanding of.
Your last paragraph is something I have been worried about, I do have a feeling that after making this change there will probably be unforseen issues that will need to be resolved, I'm just hoping it is not too many. For the scope of this thread I will just focus on issues that may arise with the Snow Leopard Server however.
Again, thank you for your help. -
What is the real ip address to the apple server? Someone changed the host file in windows/system32/drivers/ect, and now I can't do a restore on my iPhone 3gs
"You have to change your router's IP address to be able to access it. It will not give you the internet."
I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
"Log on to your router and change two settings.
Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
Click on Advance Routing and change the setting from Gateway to Router then click on save."
I did this and still same results as far as I can tell. Can't get online through the router.
"Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
If getting IP in public range .... try going online ...."
I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
Here's what my basic setup looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
Here's what the advanced tab looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
Modem setup looks the same
Message Edited by Writersbloc on 09-25-2008 07:05 PM -
How do I change the size of a windows partition on my MacBook?
How do I change the size of a windows partition on my MacBook?
CampTune $19 from Paragon-Software is your best bet.
http://www.paragon-software.com/mac/ -
[ dwm ] How to change the wallpaper and make windows transparent ?
How do I change the wallpaper and make windows transparent ( ~ 20% ) ?
Have been Googl'ing for a while now but still have no clue on how to achieve itzowki wrote:
SemiBz wrote:Thank you! And how would I set terminals to be transparent by default ? xcompmgr can be started automatically but transset requires user input
What terminal do you use? urxvt can set transparency in the Xdefaults file.
revenant wrote:
> What terminal do you use? urxvt can set transparency in the Xdefaults file.
Or, if you don't like fiddling with Xdefaults file, you can simply make urxvt transparent by executing it like "urxvt -tr -sh 20", where the number represents the transparency level. However, this is only pseudo transparency, but I like it better than resource-consuming compositing.
Will give it a try. I'm not against .Xdefaults - just haven't used it that much and know only the basics ( color schemes ) -
I want to buy MacBook pro but I'm wandering for the keyboard could Mac's shop change the keyboard into Arabic keyboard. I want to buy 2 laptops . I have friends in USA and they visited Apple store and they asked about change the keyboard and they said Ok (the Apple store) so, I don't know about Australia store
I'm student and my une (university of New England ) give me 10% discount for each. Thanksalifromarmidale wrote:
I need the keyboard English with Arabic. Thanks
These are user to user technical assistance forums, and nobody here represents Apple or any store. In order to find out whether you can buy something at a particular store, you really need to find some way to contact the store directly. -
Changing the colour of frame window
How can I change the colour of frame window and set some other colours?
RonyYes I did. I got this code by Rodney.
JFrame.setDefaultLookAndFeelDecorated(true);
UIManager.put("activeCaption", Color.RED);
JFrame frame = new JFrame();It is a good one. But the extreme outer border still looks blue. Also, a window like icon is shown and some dots are shown near to minimize button. How to avoid these?
Rony -
[Solved] How does one go about changing the hostname in arch nowadays?
Everything I've seen on the subject references /etc/rc.conf, which I believe is no longer used.
I've updated /etc/hostname, but when hostname -f does not return the expected.
Last edited by mreiland (2013-07-14 21:09:07)mreiland wrote:How does one go about changing the hostname in arch nowadays?
Please see "man archlinux".
Also, I can never remember if hostname is one of those things you need to reboot for...
Last edited by drcouzelis (2013-07-13 16:24:10) -
How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?
DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Question about garageband: I have 3 short original songs that i wanted to merge ala "Bohemian Rhapsody". Is that possible in garageband? their tempos are all different from each other. Advance thanks.
First of all, GarageBand iOS allows for only one tempo and there is no Merge Song feature.
What you can do.
Switch between the songs and copy-paste the individual Tracks. You can also Merge Tracks if you run into the 8 Track limitation.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
How do you change the position of email sender so that it's on the left (sender[from], subject and date received)
In the Thread Pane where your messages are listed?
You see that bar with the labels "From", "Subject", "Date" and so on? Well, they are buttons. You can click on them to sort your messages. You can also drag them with the mouse left and right to reposition them, and you can drag their ends to change the column widths.
These are standard computer actions; you can do all of this in Windows Explorer ("My Computer") too.
In Thunderbird, a right-click on any of these buttons will reveal a pop-up menu where you can select and deselect the columns to control what is shown.
More here: http://www.ramsden.org.uk/8_How_to_sort.html -
How do I change the default apple id (email address) that is prompted on my iPhone? It prompts me with an id that I do not have and cannot access.
When do you get prompted for this ID? If you are asked for an AppleID
you do not know during Activation, contact the seller for assistance. Only
the person who set the Activation Lock can remove it. If the seller refuses
or does not know the requested AppleID and passcode, return the iPhone
for a full refund as it is useless. There is no work around for Activation Lock,
The person who set the lock needs to follow the actions in this link:
Prepare your device to sell or give away
You can check if Activation Lock is the problem here:
https://www.icloud.com/activationlock/
That link will only tell you if the iPhone is Activation Locked - it will not provide
any information about the source of the lock, nor can you get any information
from any source other than the original owner of the iPhone/person who set
the lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515 -
Someone changed the settings on my iPhone so that I can no longer update or add apps. The icon no longer appears. Can someone please tell me how to add that back?
I should have added that the iTunes app is not displayed on my phone in order for me to add the apps.
-
How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.
Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
-Messymeese
Maybe you are looking for
-
Hi , I am using Apex Version 4.1.1.00.23. I am running an Interactive report in Apex that is running about15- 20 seconds . I take the query out of the report and run the query in sqldeveloper and it runs in 4 seconds. Why does it run so much slower
-
Is Apple warranty valid if NOT buying from an authorized reseller?
If I buy a new, unregistered product that's NOT from an Apple-authorized reseller, is the 1 year warranty still valid? Can AppleCare still be purchased? Do I need some kind of receipt from the seller? I can't find anything on Apple's site that says I
-
How do i get my security question
how do i get my security question answer?
-
Why is Compressor freezing when compressing?
Hi, I would really appreciate help with this problem. Compressor has recently started freezing / getting stuck when compressing. This happened a couple of years ago and was resolved by using Compressor Repair 1.1.3. I've tried the Repair programme
-
Hi all, I understand that there are already many forums out there on this topic. I have also visited several youtube and forums, tried to follow instructions and all the suggested methods but at end of the day, it doesn't work for me. In short, I am