Question about changing values of a total by selecting a check box.

OK, so what I did was create a form for my workplace that totals the value an employee's quality of work. what i want this form to do is: In one cell the total is a 100 point value. In one column i have a markable checkbox and in the column next to that there is a point value for that particular category. what i want is to be able to check a box next to category and have the corresponding point value deducted from the "100" total. for example if I check the box next a value of 40, then the 100 becomes a 60 automatically. I am new to numbers, and any spreadsheet app for that matter so any help would be greatly appreciated.

Tommyboy29 wrote:
Another question about my last post: numbers will only let me add 2 to 3 cells in the formula to change the "total" number of 100. is there a way to add more then 3 cells? i have 9 cells total that i want to have the ability to subtract from that same total?
There is no such limit in Numbers. I'm guessing that you ran out of room in the formula edit line in the Formula Bar.
Grab the double line and pull it down to expand the edit area.
Jerry

Similar Messages

Question about changing a Snow Leopard Server network settings

We have an Xserve running Mac OS X Server 10.6.8, the primary services running on it are afp, smb, dhcp, dns, jabber and the calendar sever.
Right now we have a router connecting two networks together, 192.168.0.0/24 and 192.168.1.0/24. The Xserve has a static IP address in the 192.168.0.0/24 range.
In order to combine two phone systems into one I am required to combine the above networks, this will involve removing the router and changing the subnet mask on every device from 255.255.255.0 to 255.255.254.0, any device that is currently part of the 192.168.1.0/24 network will also need to have it's router setting changed from 192.168.1.1 to 192.168.0.1. That part should all be easy.
However, this is my first experience expanding a network past a standard class C and am wondering if there is anything I need to watch for on my Snow Leopard Sever.
Specifically I wonder about dhcp settings, right now there are two dhcp servers, the Xserve which provides dhcp for 192.168.0.0/24 and the router that provides dhcp for 192.168.1.0/24. Once the router is removed the Xserve will need to provide dhcp for the entire network.
Looking at the Xserve dhcp configuration right now I have one subnet defined providing addresses 192.168.0.5 to 192.168.0.125.
Can I simply click the + to add another subnet and add for instance a range of 192.168.1.5 to 192.168.1.125?
Will it simply give out all of the ip addresses in the first range and then start with the 2nd? Or do I need to find a single range of ip addresses large enough to meet my needs? (e.g. 192.168.1.5 to 192.168.1.225 or something).
Is there anythign else to watch for after making this type of network setting change?
Thanks in advance.

Thank you for your very detailed reply.
I understand the problems that can arise using 192.168.0.x and 192.168.1.x and if this were a new project I would definitely switch to something else, however in this case we have been using these ip ranges for years (they were in use here long before I started) and I don't want to have to redo all of my dns settings at the same time I make these other changes so I'm going to stick with the same ip's we are using at least for now. Anyone here needing vpn access has already dealt with this issue but we have very few vpn users so it has not been a major problem for us to date.
My biggest question is about increasing the size of the dhcp pool. For instance, after I change all the network settings and set up a /23 network is it possible to have a single dhcp pool that includes some ip's in the 192.168.0.x range and others in the 192.168.1.x range? I guess what I am asking is when I am in Server Admin and click on DHCP one of the tabs across the top is "Subnets". Right now there is a single "subnet" configured that provides addresses from 192.168.0.5 to 192.168.0.125.
Ideally I would like one dhcp pool that provides ip's in the range of 192.168.0.5 to 192.168.0.125 and then if all of those are used up, moves to 192.168.1.5 to 192.168.1.125. Can I do that by simply adding another "Subnet" so there are two? Or do I have to find one larger single range? (e.g. 192.168.1.5 to 192.168.1.225?) You may have already answered this indicating I have to have a single larger range but I just want to be sure.
The parts about changing subnet masks, and routers and all that I think I have a pretty good understanding of.
Your last paragraph is something I have been worried about, I do have a feeling that after making this change there will probably be unforseen issues that will need to be resolved, I'm just hoping it is not too many. For the scope of this thread I will just focus on issues that may arise with the Snow Leopard Server however.
Again, thank you for your help.

Question about changing frame rate from PAL to NTSC

Hi,
Usually, I would use JES Deinterlacer for changing the 25 fps of PAL into 29.97 NTSC.
Recently I've started shooting with Sony's EX-3, full HD (in PAL mode)
If I'm using JES Deinterlacer, the resolution would drop from 1920x1080 to 720x480 (adding 2 black rectangles to keep the 16:9 ratio)
With the 720x480 res I would need to choose 4:3 aspect in iDVD.
I'm somewhat confused here...Can I keep the original resolution of 1920x1080 and just use another software for changing the frame rate...then burn it with iDVD in widescreen 16:9? Is there anything like JES for that? Or does NTSC DVD means always 720x480?
Thanks a lot!
ymotion

You could try doing it in compressor>advanced format conversions. Personally I like taking it to a terranex, but I also have had GREAT success with Graeme Nattress's standards converter. You can google it, or search this forum for a link. It's cheap, only a hundred bucks or so.
1. Convert the footage pal to ntsc, no frame size change
2. Open compressor and select the appropriate setting for the length of your video. And also add the dolby audio setting. Don't forget the anamorphic settings noted above.
3. I don't remember anything at all about idvd, haven't used it since DVDSP came out. DVDSP allows you a whole host of display parameters and infinite customization for your projects. It'll only take you a couple of hours to figure it out, and those are hours well spent.

How to Select each check box values in a group of records

Hi,
I have a requirement in forms 10g. In that form there are 10 records are displaying each record has one check box is there if i click the check box on record number one and record number three and do some changes in the text field(adjustment field is number data type) then finally I want to see the total on one field called total amount.
In this my question is how to select particular records in a group of records? and finally these selected records are inserted into one table.
Because I am not able to fetch these records at a time.
Is there any Array to define a record group to fetch each of them individually for example Rec[1],Rec[2]...like that if yes please suggest me the steps how to do this.
Thanks in advance
Prasanna
Edited by: user10315107 on Dec 17, 2008 11:44 PM

I'm sorry, but i didn't get your requirement in detail.
Do you want to do the summing of the selected records in forms ? Or do you just want to know which records are selected and then process them?
If you want to process the selected records in sql you could use an object-type to store the list of id's (of whatever primary key you use), loop over the block to fill it, and then afterwards process them.
For this approach, first create an object-type in the database:
CREATE OR REPLACE TYPE ID_LIST AS TABLE OF NUMBER;
/Then, in forms you could do something like this to fill a list of id's:
DECLARE
lIds ID_LIST:=ID_LIST();
BEGIN
GO_BLOCK('MYBLOCK');
FIRST_RECORD;
LOOP
    EXIT WHEN :SYSTEM.RECORD_STATUS='NEW';
    IF :BLOCK.CHECKBOXITEM="CHECKEDVALUE" THEN
      lIds.EXTEND(1);
      lIds(lIds.COUNT):=:BLOCK.PRIMARYKEYITEM;
    END IF;
    EXIT WHEN :SYSTEM.LAST_RECORD='TRUE';
    NEXT_RECORD;
END LOOP;
-- Now you can use the object-list in SQL like :
INSERT INTO MYNEWTABLE (cols..)
SELECT (cols..)
    FROM MYOLDTABLE
   WHERE ID IN (SELECT COLUMN_VALUE FROM TABLE(lIds));
END;Edited by: Andreas Weiden on 18.12.2008 18:17

Populate the values to list item based on a check box

Hi,
How can i populate the values from a field on the form to one list item based on a check box,
the pseudo code is like,
if checkbox = checked then
populate the particular field value to the list item;
checkbox = unchecked;
next_record;
end if;
Thanks
Bcj

To populate a Tlist item, do the following:
1. Create a TLIST item in the EMP block. and give it a height to accommodate several names.
2. Using the TLIST property pallete:
a. Set the Column Name property to EMPNO
b. Click on the Elements in List property. Delete each List Element and delete each List Item Value. If you don't do this you will get an error when you compile.
3. Create a record group using this query:
select ename, to_char(empno) from emp
4. Create a WHEN-NEW-FORM-INSTANCE trigger, and place this code inside the trigger:
Declare
err_num number;
Begin
clear_list('YOUR_TLIST');
err_num := populate_group('YOUR_RECORD_GROUP');
If err_num = 0 Then
populate_list('YOUR_TLIST', 'YOUR_RECORD_GROUP');
Else
message('Error populating Tlist');
message('Error populating Tlist');
End If;
End;
5. Compile and run the form. The ENAMEs will appear in the TList, and each ENAME will have a value equal to its EMPNO.

Question about changes in currentRow

Dear Community,
In Creator 2004Q4 data tables you can use the "currentRow" in value binding expressions as currentRow['column']. Now with Creator 2, one must use currentRow.value['column']. I would like to know what else has changed about this. Can any of you explain or point me to the appropiate tutorial/article about the currentRow concept?
Thank you in advance.
Antonio.

As far as I can recall, nothing besides the notation
has changed. Under the covers, currentRow is a
temporary request attribute used when iterating the
rows of a table. As such, it can be used in binding
expressions. We changed the notation when we
introduced data providers. The new notation ensures
when evaluating an expression that what you want is
the value for the current row and the specified field
key. (To get the value, the data provider's getValue
method will be called.)Thank you for your answer. I have a more specific question:
I'm using arrays of DTO (Data Transport Objects) with Tables. Everything wasf fine until I've had to deal with a DTO with a nested class, ie:
public class MyHelperDTO {
private String name;
public String getName() {
    return name;
public void setName(String name) {
    this.name = name;
public class MyDTO {
private Long id;
public Long getId() {
    return id;
public void setId(Long id) {
    this.id = id;
private MyHelperDTO helpDTO;
public MyHelperDTO getHelpDTO() {
    return this.helpDTO;
public void setHelpDTO(MyHelperDTO helpDTO) {
     this.helpDTO = helpDTO;
}It is possible to access the properties of the inner DTO from a currentRow, ie. currentRow.value['helpDTO'].value['name']? I've actually solved in another way, but I'm still curious about it.
Thank you in advance.
Antonio.

Question about changing TimeCode of media clip

Hello,
The short I'm working on was shot in 35mm, 24fps. First of all, some info about the project:
- One-light transfer to BetaSP PAL (the dailies were sped up by 4% to match PAL's framerate), with burned in TC and keycodes
- Made a dupe of the dailies in DVCam PAL with slave codes so that the DVCam's address track matches the burned in TC
- Captured each lab reel as one long media clip into FCP (8 reels in total)
- Creat subclips for each scene and for sync'ing audio.
Everything worked out fine except for 1 lab reel. During the DVCam dupe, the TC jumped by 1 frame half way into the reel. So in the last half of this reel, the address track is 1 frame off (comparing to the burned in TC). Luckily, the TC jump didn't occur during any important scene.
Since making another DVCam dupe was not an option (long story about working in Asia), I thought of a way around this. I divided this reel into 2 sections at the point where the TC jump occured. I created an Auxiliary Code for the section with the 'bad' TC so that the Aux Code matches the burned in TC.
Now the rough cut is done. I need to export an EDL to re-telecine the neg for full grading.
My question: is it a bad idea to do an EDL with both regular TC and Aux Codes? Or should I just change the TC on the 'bad' reel ?
Sorry for the length explanation. Thanks in advance.
G5 2.3GHz Dual Core, 4.5GB RAM, 2 500GB drives Mac OS X (10.4.4) Powerbook G4 on OS 10.3.9
G5 2.3GHz Dual Core, 4.5GB RAM, 2 500GB drives Mac OS X (10.4.4) Powerbook G4 on OS 10.3.9
G5 2.3GHz Dual Core, 4.5GB RAM, 2 500GB drives Mac OS X (10.4.4) Powerbook G4 on OS 10.3.9

You're probably fine using the Aux TC in your EDL.
In that case, should I create Aux TC for the lab reels with the correct TC as well (with the Aux TC being the same as the address track? That way the EDL would only deal with just the Aux TC rather than a mixture of regular TC and Aux TC.
you could make a new DVCam PAL from your
captured footage (restoring the matching TC with the
burned in TC) and then recapture the media you used
from the fixed section.
I don't have access to a deck that allows preset TC. Would it be the same if I just change the TC on the bad section? I know that typically it's not advisable to change TC in media clips. But in this case, it's just the dailies, not the final media.
TD

Question about changing ID3 images

Hey everyone. I recently changed my podcast artwork. I use Powerpress, so changing the MAIN artwork was quite easy. So for this question, I am referencing only the individual art that is displayed with each individual episode.
I know that for iTunes to recognize a change in episode artwork, that it cannot have the same name as the previous. The new artwork embedded does have a new name but is it the artwork that needs a different name, or the entire mp3 that needs a new name? Once artwork becomes embedded as ID3 I'm not sure if it loses its name altogether. So I need to know specifically what needs a new name for iTunes to update my episode art? Pic name or mp3 name?
Thanks for your time!

Thanks for the response Roger.
So just to be clear, I have changed the images embedded in my MP3s. I then re-uploaded them to Libsyn using the replace function. So I now have MP3s with the exact same name as before, but with a new image embedded. Are you saying iTunes will see the image change in each episode even though the name of my MP3 is exactly the same?
So far, iTunes has immediately updated my main podcast image but all my individual episodes still have the old image.
You can probably see what I'm talking about by searching iTunes for Netflix Junkies. You'll see that 'episodes' has different artwork than 'podcasts' in the search results. Do I just need to wait it out? Or rename my mp3s?
Keep in mind, there is another podcast with the same name no artwork. This is not my podcast but someone else's.
Thanks again!

Question about changing a file type into another file type

Hello. This isnt a java question but you guys have been so helpful in the past I hope its ok if I ask this question for a friend.
How can I import a scriptware file into Screenwriter 2000, or change a .scw file into a .tag file?
Anyone who can help thanks.

I know nothing about scriptware or Screenwriter. But, my only advice is to see if Scriptware can export some other file type (not necessarily a .scw file) that Screenwriter can read. Sometimes, when I have two text editors whose native formats are incompatible (like opening a paper typed in a new version of Microsoft Word using an old version of WordPerfect or something), I save the file as an RTF file, rather than in the native format. Maybe something like that applies to your situation, too.
Hope that helps.
Jason

Question about normalizing values

Hey guys,
I have this code here that reads in odometer reading from two vehicles and plots them.
Here is my question
since each vehicle has its own starting values such as 85K miles or 15K miles...
How would i normalize the initial odometer reading at 0 and loop through the other values with the same proportion?...
Here's the code I have :
public void plotDataset(String label, TimeSeriesCollection tsc,
                               dataSet ds) {
    String dsName = ds.majorDescriptor;
    dbg("processing " + dsName);
    TimeSeries ts = new TimeSeries(label, Day.class);
    int dsSize = ds.size();
    for (int i=0; i<dsSize; i++) {
      dataEl el   = ds.get(i);
      double val = el.getMainValue();
      Date   date = el.getDateJava();
      ts.addOrUpdate(new Day(date), val);
     tsc.addSeries(ts);
}

spoon_ wrote:
Jazman wrote:
This doesn't make sense to me. What it seems to be saying is create an object of type StringWriter and pass a copy of this object to an invoke method. Then pass a copy to the filter method and set the return value to a String call output. However before you pass a copy to the filter method convert it to a String.Objects are not values in Java. "stringWriter" is a reference to a StringWriter object. In your other example "i" is a reference to a String object. A reference is kind of like a pointer in C.
Edited by: spoon_ on Dec 27, 2007 5:44 PMOkay so i is a reference, but then if that reference is passed onto another method doesn't that method instantiate its own copy of that reference, i.e. create a new reference pointing to a new object. That is why the value of String i doesn't change when you pass it to the method.
However the value of stringWriter in the example given below does change;
public class test2 {
    public static void main(String[] args) {
        StringBuilder i = new StringBuilder("Hello");
        System.out.println("The value of i is "+i);
        addOne(i);
        System.out.println("The value of i is now "+i);
    public static void addOne(StringBuilder i){
        i.append("Goodbye");
}why is it that the value of stringWriter is changed when you pass it to a method and the value of String i isn't changed when you pass it through a method?

A question about input values inside PL/SQL block

Dear all,
I would appreciate if you could kindly help me with this question.
Consider the following code.
DECLARE
myvar1 NUMBER;
myvar2 NUMBER;
myvar3 NUMBER;
BEGIN
myvar1 := &1;
myvar2 := &2;
myvar3 := &3;
DBMS_OUTPUT.put_line('myvar1 = ' || myvar1);
DBMS_OUTPUT.put_line('myvar2 = ' || myvar2);
DBMS_OUTPUT.put_line('myvar3 = ' || myvar3);
END;
/This program reads three values as input and prints them. However, I noticed that if instead of writing
myvar1 := &1;
myvar2 := &2;
myvar3 := &3;I write
myvar1 := '&1';
myvar2 := '&2';
myvar3 := '&3';The program will have very same result. I would like to know whether there is a semantic difference between both syntax,
that is, is there any difference between for example &myvar1 and 'myvar1'?
Thanks in advance,
Dariyoosh

Try this
CREATE TABLE test_sem (x VARCHAR2(10), y NUMBER)
INSERT INTO test_sem VALUES ('A',1);
INSERT INTO test_sem VALUES ('B',1);
INSERT INTO test_sem VALUES ('C',1);
INSERT INTO test_sem VALUES ('D',1);
SELECT * FROM test_sem WHERE x='&1' --OK
SELECT * FROM test_sem WHERE x=&1 -- error not a valid number
SELECT * FROM test_sem WHERE y=&1 -- ok
SELECT * FROM test_sem WHERE y='&1' -- ok since numbers can be converted to strings'&1' is for characters &1 for numbers;
You can verify form above test case
Regards,
Bhushan

Questions about changing the graphic card

Greetings I need to change the graphic card that came with my computer Pavilion 500-308nrit's GeForce GTX 745 4Gb with GeForce GTX 960now i have couble questions the graghic card that i'm going to buy has a bigger cooling system so is't going to fit inside the case?the GTX 960 require a minimum power supply with 400W so is't gonna be a problem if i changed the power supply?. and is there is a specific power supply that will work better with my PC? and thank you

Hi, The specifications for 500-308nr indicate an external 180 watt power supply supply. Is that true? If the specifications are correct then you will not be able to install an internal power supply.

Question about changing xml tags in your RSS feed

If I were to change the "author" of my podcast (namewise) - would that mess up the feed for anyone subscribed? I'm not sure what end users see or experience.
<itunes:name>element
So I I switch this to a different name - does that mess up existing subscribers in any way?
Thanks!

No: subscribers identify the feed by its URL and any changes you make to tags will simply appear for them. Changes will appear in the iTunes Store after a delay of a couple of days or so, but immediately for subscribers.

Question about changing states

I have a component based on a skinnableContainer that is hidden in stateA and visible in stateB. The problem is when the container is hidden in stateB the components within the container are still visible. Is there a way to hide the container and all its components? FYI the states are defined at the component level.
thanks

Here is the sample code, I removed unrelated code.
Custom component cod
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
         xmlns:s="library://ns.adobe.com/flex/spark"
         xmlns:mx="library://ns.adobe.com/flex/mx"
         xmlns:components="components.*"
         width="100%" height="100%" creationComplete="group1_creationCompleteHandler(event)">
    <s:states>
        <s:State name="State1"/>
        <s:State name="viewSearch"/>
        <s:State name="viewCart"/>
    </s:states>
    <s:transitions>
        <s:Transition fromState="*" toState="viewCart">
            <s:Parallel>
                <s:Resize target="{productSearchContainer}" duration="500" />
                <s:Resize target="{cartContainer}" duration="500" />
            </s:Parallel>
        </s:Transition>
        <s:Transition fromState="*" toState="viewSearch">
            <s:Parallel>
                <s:Resize target="{productSearchContainer}" duration="500" />
                <s:Resize target="{cartContainer}" duration="500" />
            </s:Parallel>
        </s:Transition>
    </s:transitions>
    <fx:Declarations>
    </fx:Declarations>
    <s:layout>
        <s:HorizontalLayout paddingLeft="10" paddingTop="20" paddingRight="10" gap="5"/>
    </s:layout>
    <components:ProductSearchContainer id="productSearchContainer" width.viewCart="0" width.viewSearch="200"/>
    <components:CartContainer id="cartContainer" width.viewCart="200" width.viewSearch="0"
                              width.State1="0" alpha.viewSearch="0" alpha.viewCart="1"/>
</s:Group>
CartContainer code:
<?xml version="1.0" encoding="utf-8"?>
<s:SkinnableContainer xmlns:fx="http://ns.adobe.com/mxml/2009"
                      xmlns:s="library://ns.adobe.com/flex/spark"
                      xmlns:mx="library://ns.adobe.com/flex/mx"
                      xmlns:components="components.*"
                      width="{fixedWidth}" height="100%">
    <s:layout>
        <s:VerticalLayout paddingBottom="0" paddingLeft="5" paddingRight="10" paddingTop="10"/>
    </s:layout>
    <s:Label id="title" text="Your Shopping Cart" styleName="standardBoldText"/>
    <s:List id="cartList" width="100%" height="100%" dropEnabled="true"
            dataProvider="{acCart}" itemRenderer="renderers.CartRenderer"/>
    <mx:Spacer height="10"/>
    
    <s:HGroup horizontalAlign="right" width="100%">
        <s:Label text="Grand Total:" styleName="standardBoldText"/>
        <mx:Spacer width="10"/>
        <s:Label text="{usdFormatter.format(total)}" styleName="standardBoldText"/>
    </s:HGroup>
    <s:HGroup horizontalAlign="right" width="100%">
        <s:Button label="Submit Order"/>
    </s:HGroup>
</s:SkinnableContainer>

Question about changing zonepath from one mount point to another

Hi all
A local zone is currently running with its zonepath, say /export/home/myzone, mounted on a Veritas volume. Is it possible to change the zonepath to a different mount point, say /zone/myzone, which is mounted on the same volume, without re-installing the entire zone?
Regards
Sunny

Yes..
U can use zonecfg to reconfigure the zone..
which is Sun's supported way..
I just usually edit /zones/zone-name.xml
There are several ways to move a zone, but this has
always worked for me..
- stop the zone
- tar the zone
- move the zone
- edit the /etc/zones/zone-name.xml (to reflect the new path)
- detach the zone
- attach the zone (so it regnerates the hash)
- boot the zone
hth

Question about changing values of a total by selecting a check box.

Similar Messages

Maybe you are looking for