Question about changing xml tags in your RSS feed

If I were to change the "author" of my podcast (namewise) - would that mess up the feed for anyone subscribed? I'm not sure what end users see or experience.
<itunes:name>element
So I I switch this to a different name - does that mess up existing subscribers in any way?
Thanks!

No: subscribers identify the feed by its URL and any changes you make to tags will simply appear for them. Changes will appear in the iTunes Store after a delay of a couple of days or so, but immediately for subscribers.

Similar Messages

Question about sony NFC tags

Hi every body,
I have a little question about the NT1 smart tags of sony.
I installed other app from google play to NFC tags in my phone.
I installed it, because the smart tag app of sony, don't have the action to turn on or turn off the GPS by NFC tag.
When I used with other app, and I written on the blue smart tag, I mark to became the blue smart tag to read only.
So, now I can't to write on him, and the phone is not recognazied the blue smart tag ( all other smarts tags is OK, because I didn't used them ).
When I scan the blue smart tag, the phone show a message: "unknown type tag".
Am I can cancelled it and became it back? that's mean that the phone is recognaized it and I can to write on it?
Or, is it one way, and I can't used with the blue smart tag again?
Thank you.

you can do a factory reset or repair your phone with SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Question about changing a Snow Leopard Server network settings

We have an Xserve running Mac OS X Server 10.6.8, the primary services running on it are afp, smb, dhcp, dns, jabber and the calendar sever.
Right now we have a router connecting two networks together, 192.168.0.0/24 and 192.168.1.0/24. The Xserve has a static IP address in the 192.168.0.0/24 range.
In order to combine two phone systems into one I am required to combine the above networks, this will involve removing the router and changing the subnet mask on every device from 255.255.255.0 to 255.255.254.0, any device that is currently part of the 192.168.1.0/24 network will also need to have it's router setting changed from 192.168.1.1 to 192.168.0.1. That part should all be easy.
However, this is my first experience expanding a network past a standard class C and am wondering if there is anything I need to watch for on my Snow Leopard Sever.
Specifically I wonder about dhcp settings, right now there are two dhcp servers, the Xserve which provides dhcp for 192.168.0.0/24 and the router that provides dhcp for 192.168.1.0/24. Once the router is removed the Xserve will need to provide dhcp for the entire network.
Looking at the Xserve dhcp configuration right now I have one subnet defined providing addresses 192.168.0.5 to 192.168.0.125.
Can I simply click the + to add another subnet and add for instance a range of 192.168.1.5 to 192.168.1.125?
Will it simply give out all of the ip addresses in the first range and then start with the 2nd? Or do I need to find a single range of ip addresses large enough to meet my needs? (e.g. 192.168.1.5 to 192.168.1.225 or something).
Is there anythign else to watch for after making this type of network setting change?
Thanks in advance.

Thank you for your very detailed reply.
I understand the problems that can arise using 192.168.0.x and 192.168.1.x and if this were a new project I would definitely switch to something else, however in this case we have been using these ip ranges for years (they were in use here long before I started) and I don't want to have to redo all of my dns settings at the same time I make these other changes so I'm going to stick with the same ip's we are using at least for now. Anyone here needing vpn access has already dealt with this issue but we have very few vpn users so it has not been a major problem for us to date.
My biggest question is about increasing the size of the dhcp pool. For instance, after I change all the network settings and set up a /23 network is it possible to have a single dhcp pool that includes some ip's in the 192.168.0.x range and others in the 192.168.1.x range? I guess what I am asking is when I am in Server Admin and click on DHCP one of the tabs across the top is "Subnets". Right now there is a single "subnet" configured that provides addresses from 192.168.0.5 to 192.168.0.125.
Ideally I would like one dhcp pool that provides ip's in the range of 192.168.0.5 to 192.168.0.125 and then if all of those are used up, moves to 192.168.1.5 to 192.168.1.125. Can I do that by simply adding another "Subnet" so there are two? Or do I have to find one larger single range? (e.g. 192.168.1.5 to 192.168.1.225?) You may have already answered this indicating I have to have a single larger range but I just want to be sure.
The parts about changing subnet masks, and routers and all that I think I have a pretty good understanding of.
Your last paragraph is something I have been worried about, I do have a feeling that after making this change there will probably be unforseen issues that will need to be resolved, I'm just hoping it is not too many. For the scope of this thread I will just focus on issues that may arise with the Snow Leopard Server however.
Again, thank you for your help.

How to change XML Tag sequence in XML Publisher Reports

Hi Experts,
I am working on XML Publisher reports, EBS 11I and Database 9i. I have standard report 'PO Printed Purchase Order Report (XML)', it's output type is XML. I want to change the sequence of groups in XML file.
I am getting XML tags like below at present:
LIST_G_HEADERS \ G_HEADERS \ LIST_G_HEADER_NOTES
I want to change the sequence of groups like below.
LIST_G_HEADERS \ G_HEADERS \ LIST_G_LINES \
Could somebody help me how to change the sequence of XML Groups.
Thanks in advance.

Paul,
This works. Thanks!
I am still working through the implications of having a data connection defined. I notice that every time I submit, it creates two records in my database, one with all the fields blank, and one with the data and attachment.
I will have to do some more digging into the double submission, but at least it is uploading the file.
Thanks again,
Ed

Miscellanous questions about BDB XML

Hi !
I'm in search for a storage solution for a Matlab app that manipulates big volumes of datas (several Gb), and so can't load them fully in memory without crashing. I also can't load / unload them each time I need a bit of these data, since it is rather long to load a file in memory (about 0.12s). So I was thinking about using a DMB like BDB XML, and I have a few questions about it :
<ul><li>What about performances to create a 3-5Gb database in a single batch ?</li>
<li>What about performances to excecute a XQuery request on a db this large ? Longer or shorter than loadin directly the file in memory ? With an index or without ?
</li>
<li> No matlab integration is provided, so I have to way : use Matlab C integration to make an interface to use BDB XML, or using the shell via an exec like command to interact with BDB ? Is the shell trick performant ? Or does it spend a lot of time parsing the input ?</li>
</ul>
Thanks for those who will take a bit of their precious time to answer my questions !

Hello,
I'm in search for a storage solution for a Matlab app that manipulates big volumes of datas (several Gb), and so can't load them fully in memory without crashing. I also can't load / unload them each time I need a bit of these data, since it is rather long to load a file in memory (about 0.12s). So I was thinking about using a DMB like BDB XML, and I have a few questions about it :
<ul><li>What about performances to create a 3-5Gb database in a single batch ?</li>It will take a while. If you bulk load you should avoid using transactions and sync/exit the environment when you are done. Note that you should determine what indexes you might want/need before doing the load and create them. Reindexing 5GB of data will take another really large chunk of time. I recommend experimentation with indexes, queries and a small representative subset of the data.
Be sure to create a node storage container with nodes indexed.
Is this one document or many? Many is better. One 5Gb document is less than ideal but will work.
<li>What about performances to excecute a XQuery request on a db this large ? Longer or shorter than loadin directly the file in memory ? With an index or without ?You really need indexes. The query will likely succeed without indexes but depending on the query and the data could take a very long time. See above on experimentation first.
</li>
<li> No matlab integration is provided, so I have to way : use Matlab C integration to make an interface to use BDB XML, or using the shell via an exec like command to interact with BDB ? Is the shell trick performant ? Or does it spend a lot of time parsing the input ?</li>There is no C interface, just C++. I would not recommend using the dbxml shell for this although you could if you really need to.
Let the group know how this turns out.
Regards,
George

Question about changing values of a total by selecting a check box.

OK, so what I did was create a form for my workplace that totals the value an employee's quality of work. what i want this form to do is: In one cell the total is a 100 point value. In one column i have a markable checkbox and in the column next to that there is a point value for that particular category. what i want is to be able to check a box next to category and have the corresponding point value deducted from the "100" total. for example if I check the box next a value of 40, then the 100 becomes a 60 automatically. I am new to numbers, and any spreadsheet app for that matter so any help would be greatly appreciated.

Tommyboy29 wrote:
Another question about my last post: numbers will only let me add 2 to 3 cells in the formula to change the "total" number of 100. is there a way to add more then 3 cells? i have 9 cells total that i want to have the ability to subtract from that same total?
There is no such limit in Numbers. I'm guessing that you ran out of room in the formula edit line in the Formula Bar.
Grab the double line and pull it down to expand the edit area.
Jerry

Change xml tags?

Hi Guys!
I'm supposed to send a message to a web service as an XML.
The problem is that when I send the message, the tags are changed to <ns0:BuyerNumber>. Is it possible to change the tag to <BuyerNumber>???
Another problem that I have is that the XML file is going to be linked to a XLS file. Is there a way to add <?xml-stylesheet type='text/xsl' href='www.example.com/example.xsl'?> to the outgoing message?

I want to take this...
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Mottaxxxxx2 xmlns:ns0="http://www.example.com/XMLSchema">
<ns0:Interchange>
and change it to
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type='text/xsl' href='www.example.com/test.xls' ?>
<Mottaxxxxx2 xmlns:ns0="http://www.example.com/XMLSchema">
<Interchange>
As you can see, the ns0: is removed and
there is a stylesheet added to the xml.
Since I am quite new with this, can you please give a detailed solution. Not step by step guide, but close

Getting your RSS feed to work without .Mac

OK, so there have been a few people asking about this and I have figured out a way around it. I must warn you it is not a simple solution, but if you are comfortable using Text Edit to modify the code of your pages, it is a piece of cake - but still fairly tedious. If anyone has a quicker solution, please let us know! I would love to come up with an apple script to automate this process, but that takes time...
The reason Apple says you can only use the RSS subscribe feature by using a .Mac account is because iWeb creates an additional directory that those of us using 3rd party servers don't use. They do this to separate multiple iWeb sites on your .Mac account. When you publish to a file, that extra directory is the parent folder that you extract each page's file from to load to your public_html folder on your server, so you end up not using that iWeb site folder.
For example, in publishing to .Mac, I will find my Blog rss.xml file on my iDisk under Web/Sites/iWeb/BookEndMedia/Blog/rss.xml, creating the URL of http://web.mac.com/audiogeek/BookEndMedia/Blog/rss.xml. In publishing to my 3rd party server with domain www.bookendmedia.com, that file is found in public_html/Blog/rss.xml, creating the URL of http://www.bookendmedia.com/Blog/rss.xml.
The problem arises in iWeb's creation of the rss.xml file, blog-main.xml file, and blog-archive.xml file, which are all located in the Blog folder. Each of these files create links to the Entries files and jpegs, and in doing so adds the BookEndMedia directory, which is does not exist in our 3rd party server.
The way I found to fix this is after publishing and before uploading to open all 3 files mentioned above in Text Edit, hit Command F to find and replace all instances of "/BookEndMedia/" with "/", removing the extra directory from all links.
There is however one more glitch I found that has nothing to do with the extra directory. These .xml files that iWeb creates look for all jpegs from each entry in the Media folder. iWeb now stores these files in the same folder as the blog entry. Instead of changing each link in the .xml files, I simply copied each jpeg into the Media file.
After doing all this I now have a functioning RSS feed that any RSS reader can subscribe to and even see the pictures. The only problem is every time I post I have to go through all this again with each .xml file and copying the new entry's jpeg into the Media folder.
Hopefully Apple will come up with a way for iWeb to distinguish if you are publishing to a folder and write the appropriate code for creating these .xml files. Until then, we will have to do these extra steps to get what we want - or we can come up with an Apple Script to save us some time (anyone?).
In the mean time I will count my blessings in the fact that thanks to iWeb I only have to modify 3 .xml files and not write code for every single page of my site.
Hope this helps, and if anyone has any suggestions, please let us know!
And please feel free to give me feedback on my site.
Thanks!

Here is a sample of the beginning of the blog-main.xml file:
<?xml version="1.0"?>
<rss xmlns:iweb="http://www.apple.com/iweb" version="2.0">
<channel>
<title>Blog</title>
<link>http://www.bookendmedia.com/BookEndMedia/Blog</link>
<description>Here you will find press releases and coverage that BookEnd Media Publicity has produced for our clientele. Check back regularly for the latest information.</description>
<item>
<title>Andrew Peterson featured in The Tennessean</title>
<link>http://www.bookendmedia.com/BookEndMedia/Blog/Entries/2007/12/11Andrew_Peterson_featured_in_TheTennessean.html</link>
<guid isPermaLink="false">d6a00155-2e0a-4efe-bc24-97e5381f16ac</guid>
<pubDate>Tue, 11 Dec 2007 15:27:46 -0600</pubDate>
<description>The Tennessean interviews Andrew Peterson about his Christmas musical Behold The Lamb Of God: The True Tall Tale of the Coming of Christ.<br/><br/>Read the full article at: <a href="http://www.tennessean.com/apps/pbcs.dll/article%253FAID%253D2007712130301 ">http://www.tennessean.com/apps/pbcs.dll/article?AID=2007712130301</a></description>
<iweb:image href="Media/petersontennessean.jpg"></iweb:image>
<iweb:comment enabled="0" link="http://www.bookendmedia.com/BookEndMedia/Blog/Entries/2007/12/11Andrew_Peterson_featured_in_The_Tennessean.html#commentlayer" count="0"></iweb:comment>
</item>
I'm not crazy, I did see the Main folder issue above in the <iweb:image href="Media/petersontennessean.jpg"></iweb:image>
I guess it doesn't affect what I need though.

Firefox changes the url of my RSS feed. How do I fix this?

It changes the URL from http://www.vict-consultancy.co.uk/rss_feed.rss to feed://www.vict-consultancy.co.uk. The result is the xml code is shown as text on the web page http://www.vict-consultancy.co.uk/rss_feed.rss
The RSS feed seems to be working properly in other browsers (IE, Safari, Opera), it's only Firefox that is doing this.

This is only a problem if you open the feed link directly in the location bar.
If a feed is added via a link tag in the page code then it should work as you can via the above posted code.<br />
Firefox 13 doesn't have the "subscribe to this page" icon on the Navigation Toolbar by default, so you would have to add it yourself to easily discover live feeds.
<pre><nowiki><link rel="alternate" type="application/rss+xml" href="http://www.vict-consultancy.co.uk/rss_feed.rss" />
</nowiki></pre>

Naming your RSS feed?

I'm sorry if this is something obvious, but I've looked and looked and can't seem to find what I need...
I have a site with a blog created in iWeb 09 and published via MobileMe (although with my own domain name). The blog page uses the iWeb-created RSS feed link. When you follow that link online, the title of the page is simply "The Blog," rather than my site name. Similarly, if you subscribe to it, posts read in Apple Mail show "The Blog" as the title in that white-on-blue section across the top. (I'm subscribed to other RSS feeds in Mail, and they each display individualized titles.)
So how do I name the RSS feed?
Thanks!

My 2 cents,
When you publish your site I think IWeb ask you to enter your website name in a box and underneath that box they explain why (specialy for RSS feeds). Did you do that?
I had a hard time to figure that RSS feed button to work but I think entering the website path solved my problem.
Thierry

Question about changing a file type into another file type

Hello. This isnt a java question but you guys have been so helpful in the past I hope its ok if I ask this question for a friend.
How can I import a scriptware file into Screenwriter 2000, or change a .scw file into a .tag file?
Anyone who can help thanks.

I know nothing about scriptware or Screenwriter. But, my only advice is to see if Scriptware can export some other file type (not necessarily a .scw file) that Screenwriter can read. Sometimes, when I have two text editors whose native formats are incompatible (like opening a paper typed in a new version of Microsoft Word using an old version of WordPerfect or something), I save the file as an RTF file, rather than in the native format. Maybe something like that applies to your situation, too.
Hope that helps.
Jason

Question about changing ID3 images

Hey everyone. I recently changed my podcast artwork. I use Powerpress, so changing the MAIN artwork was quite easy. So for this question, I am referencing only the individual art that is displayed with each individual episode.
I know that for iTunes to recognize a change in episode artwork, that it cannot have the same name as the previous. The new artwork embedded does have a new name but is it the artwork that needs a different name, or the entire mp3 that needs a new name? Once artwork becomes embedded as ID3 I'm not sure if it loses its name altogether. So I need to know specifically what needs a new name for iTunes to update my episode art? Pic name or mp3 name?
Thanks for your time!

Thanks for the response Roger.
So just to be clear, I have changed the images embedded in my MP3s. I then re-uploaded them to Libsyn using the replace function. So I now have MP3s with the exact same name as before, but with a new image embedded. Are you saying iTunes will see the image change in each episode even though the name of my MP3 is exactly the same?
So far, iTunes has immediately updated my main podcast image but all my individual episodes still have the old image.
You can probably see what I'm talking about by searching iTunes for Netflix Junkies. You'll see that 'episodes' has different artwork than 'podcasts' in the search results. Do I just need to wait it out? Or rename my mp3s?
Keep in mind, there is another podcast with the same name no artwork. This is not my podcast but someone else's.
Thanks again!

Question about changes in currentRow

Dear Community,
In Creator 2004Q4 data tables you can use the "currentRow" in value binding expressions as currentRow['column']. Now with Creator 2, one must use currentRow.value['column']. I would like to know what else has changed about this. Can any of you explain or point me to the appropiate tutorial/article about the currentRow concept?
Thank you in advance.
Antonio.

As far as I can recall, nothing besides the notation
has changed. Under the covers, currentRow is a
temporary request attribute used when iterating the
rows of a table. As such, it can be used in binding
expressions. We changed the notation when we
introduced data providers. The new notation ensures
when evaluating an expression that what you want is
the value for the current row and the specified field
key. (To get the value, the data provider's getValue
method will be called.)Thank you for your answer. I have a more specific question:
I'm using arrays of DTO (Data Transport Objects) with Tables. Everything wasf fine until I've had to deal with a DTO with a nested class, ie:
public class MyHelperDTO {
private String name;
public String getName() {
    return name;
public void setName(String name) {
    this.name = name;
public class MyDTO {
private Long id;
public Long getId() {
    return id;
public void setId(Long id) {
    this.id = id;
private MyHelperDTO helpDTO;
public MyHelperDTO getHelpDTO() {
    return this.helpDTO;
public void setHelpDTO(MyHelperDTO helpDTO) {
     this.helpDTO = helpDTO;
}It is possible to access the properties of the inner DTO from a currentRow, ie. currentRow.value['helpDTO'].value['name']? I've actually solved in another way, but I'm still curious about it.
Thank you in advance.
Antonio.

Question about flash,xml

I have a flash form, when people click submit, I want it be
saved as an xml file. can anyone please tell me how to do this? I
think I have to do this by php, isnt it?

1/ If I have a persons details stored in a mysql database... to get it
into xml so that flash can read it... do i use php to get the details
and then simply print it out the sql result into xml format. Is this
how you would get xml out of a database? or is there a better way?
Yes, typically. At least I don't know of another way. There are some php classes that can simplify the database access and manipulation. But if you access records you typically loop through them and output the data inside tags.
2/ Why would i ever use xml?... is it simply becuase the data is then
available in a structure that other aplications/sites can understiand?
You have a choice. XML in a way is quite easy to change in terms of the output on the server and (with e4x in actionscript) how it's read in flash. But it's also a 'generic' format that can be accessed and interpreted by many different clients in different languages.
Another way is to use amfphp or other amf support on the server to support sending your data in flash's native binary encoded format. Or you could send it as name value pairs (URLVariables in as3) if its a simple single level array.

Question about validating xml against schema

Hi,
I am new to JAXP. I try to validating a xml against a schema. I wrote following code:
SAXParserFactory spf = SAXParserFactory.newInstance();
spf.setNamespace(true);
spf.setValidating(true);
SAXParser sp = spf.newSAXParser();
sp.setProperty("http://java.sun.com/xml/properties/jaxp/schemaLanguage",
"http://www.w3.org/2001/XMLSchema");
sp.setProperty("http://java.sun.com/xml/properties/jaxp/schemaSource",
"mySchema.xsd") ;
sp.parse(<XML Document>, <ContentHandler);
but when compile, it has error: can't resolve ""http://java.sun.com/xml/properties/jaxp/schemaLanguage", and
"http://java.sun.com/xml/properties/jaxp/schemaSource".
It seems it didn't support above two property.
I saw some code in forum is:
fact.setFeature("http://xml.org/sax/features/validation", true);
fact.setFeature("http://apache.org/xml/features/validation/schema",true);
fact.setFeature("http://apache.org/xml/features/validation/schema-full-checking", true);
SAXParser sp = fact.newSAXParser();
sp.setProperty("http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation",schemas);
Why sun tutorial use property:http://java.sun.com/xml/properties/jaxp/schemaLanguage
and someone use:http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation
where to get information about setting properties for SAXParserFactory?
Thanks

In the past, ColdFusion's XML validation mechanism seems to have had issues with schemas that contain imports, e.g., http://forums.adobe.com/message/155906. Have these issues still not been resolved?
Do you not think that perhaps you're answering your own question here?
I don't see an issue about this on the bug tracker. It might be an idea if you can get a simple, stand-alone repro case together and raise an issue (and post the reference back here and against that other thread so people know to vote for it). If you post the repro case here too, it would be helpful.
Adam

Question about changing xml tags in your RSS feed

Similar Messages

Maybe you are looking for