Question about changing zonepath from one mount point to another

Hi all
A local zone is currently running with its zonepath, say /export/home/myzone, mounted on a Veritas volume. Is it possible to change the zonepath to a different mount point, say /zone/myzone, which is mounted on the same volume, without re-installing the entire zone?
Regards
Sunny

Yes..
U can use zonecfg to reconfigure the zone..
which is Sun's supported way..
I just usually edit /zones/zone-name.xml
There are several ways to move a zone, but this has
always worked for me..
- stop the zone
- tar the zone
- move the zone
- edit the /etc/zones/zone-name.xml (to reflect the new path)
- detach the zone
- attach the zone (so it regnerates the hash)
- boot the zone
hth

Similar Messages

  • Packet drop when clients moving from one Access point to another

    HI  All ,
    I am new to wireless . I am using  WS-SVC-WISM-1-K9  wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
    Kindly anyone suggest me what all configuration i need to verify on the controller  for Proper client roaming so that i can resolve my issues..
    Please let me know in case of any explanations requiered .
    Thanks  in Advance !!!
    Regards
    Angus

    For radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
    For pre-shared key, any WPA should be decent enough for roaming speed.
    If you're on WEP ... no comment.
    If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops.

  • Change object from one transport request to another

    Hi,
    I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
    one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
    contains some inactive object. I have also tried to delete that object from this transport request and put in another one
    but when i tried to do that i was only allowing me to create sub task within the same request .
    Kindly suggest me
    Thanks
    Parag

    Hi,
    you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
    Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
    In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
    Rgds.
    Roman

  • About changing photos from one album to another

    I have three album in my website and I want to make some changes, moving some photos from one album to another. I have tried it by dragging them but it´s impossible.
    Please how can I do it?
    Regards

    I have the same question - how do you move photos from one album on IWeb to a different album on Iweb. I can't see your response but it looks like you know how to do it. Can you send me your response? Thanks very much. Tina Schell

  • Question about data migration from one company to new without transactions

    Dear All,
    My company is using SAP B1 2005B. I would like to create new company which is based on existing one, including all configuration, chart of A/C and BP records and so on. May I know how to do it?
    From Samson

    I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
    When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
    The server is Win2003 with 4GB memory.
    From Samson
    Edited by: samson leung on Sep 21, 2009 6:40 PM

  • Changing device from one itunes account to another?

    I just got an iphone 5 and when my husband plugged it into the computer he accidently put my phone (device) under his itunes account rather than using my Apple ID.  Is there any way to move my phone to my own account?  Everytime he gets a new app and I sync to the laptop I get everything that he's downloaded or purchased.  Please help!
    In my efforts to "fix" the problem, I deleted the two iphones from his account in the hopes that I could just reconnect the phones and change the apple ID.  Now I can't get them back.  I'm so confused!!

    1) If you are talking about a different itunes store account, just log out of the old one and log into the new one by going to: Settings, Store, Sign out. Then sign in on the different account. Warning, you'll need to log into the original account to update any apps purchased and still loaded on the ipad. THis is done at the update screen in the apps store when updating.
    2) If you are trying to clean off all the data and re-sync it with a new itunes account with new apps and music, pohotos, etc, do the following:
    _Warning: This will reset the ipad to factory specs_:
    Go to Settings, General, Reset, Erase all content and settings.
    Then, just activate and sync the ipad to the new itunes account.

  • Changing ipad from one itunes account to another

    We first linked a new iPad to one family members iTunes acct, but now wish to change that to a different iTunes account. Can that be done and if so how?

    1) If you are talking about a different itunes store account, just log out of the old one and log into the new one by going to: Settings, Store, Sign out. Then sign in on the different account. Warning, you'll need to log into the original account to update any apps purchased and still loaded on the ipad. THis is done at the update screen in the apps store when updating.
    2) If you are trying to clean off all the data and re-sync it with a new itunes account with new apps and music, pohotos, etc, do the following:
    _Warning: This will reset the ipad to factory specs_:
    Go to Settings, General, Reset, Erase all content and settings.
    Then, just activate and sync the ipad to the new itunes account.

  • Changing user from one company code to another

    Dera all,
    we are currently using SRM 5.0.
    presently one user assigned to co.code X, we want to assign this user to co.code Y .he sholud get all the attributes of  co.code Y and should not carry any attributes of co.code X.
    Kindly help me out.
    This is very urgent...
    Thanks in advance
    Rgds
    GK

    Hi,
       You can then unassign the user from Co code X and assign  under the co.code Y  in the Org Structure i tracn PPOMA_BBP.
    BR,
    Disha.
    Pls reward points for useful answers.

  • How to Move Music Library from one external HD to another

    I had about 60GB of music on an external hard drive, nicely organized and "linked to" from iTunes (just upgraded to version 5). I recently purchased a larger external hard drive and basically copied the contents of my older external drive to the new one, preserving all folder structures from the root of the drives down (but the name of the drive itself is different.) I was hoping I could just do a search/replace of the "iTunes Music Library.xml" file in my Music/iTunes folder, to replace the name of the old drive (volume) with the new one. I did, and iTunes launches fine, preserving my playlists, song ratings, etc... but whenever I try to play any of the songs, it says it can't find it (I can manually point iTunes to it, but I don't want to do that for 15,000 songs...) Strange thing, though, is that if I quit out of iTunes and re-open the Library XML file, all the paths have been reset to their original location!! What am I missing? Thanks in advance,
    Jesse

    I just want to add that the iTunes folder (with the library xml file and such) is on my local hard drive, in the typical Music/iTunes location. I don't want to simply re-import the songs 'cuz I'd lose playlist contents and ratings, and I don't want to "consolidate" the library because I want to keep my music folders and filenames as I currently have them. Basically, I just want iTunes to realize the songs have simply changed location from one external drive to another... thanks again.

  • Backing up from one USB Drive to Another

    I have two WD USB drinves that I use for my photos, one as the primsary drive,the other as the backup. When these were connected to my Windows PC I could use Western Digital's WD Anywhere Backup software to provide an "instantaneous" back up of any of the photo files that I hadd added / changed on my primary drive. This worked like a charm. Using the software with my USB drives connected to me MacBook Pro . Mavericks laptop the software thinks that it is working perfectly but is not backing up all the files. On a test I specified a folder with 40+K files and 240GB of data as the folder to be watched and backed up. The software reported a successful backup but only 11K files and 60GB of data had been transferred. I reported this to WD who indicated that the software is designed to back up from the coputer's hard drive to a back up frive, not from one external drive to another.
    My question is: Does anyone know of any software that will run as a daemon and automatically back up new / changed files from one USB drive to another? Obviously I could do this with any of a multitude of products if I scheduled hourly/daily backups. However, I would prefer the convenience of "instantaneous" backups as soon as a change is made within a watched follder. From what I have read Chronosync seems to be the best backup software for Macs but, as one reviewer noted (http://www.macworld.com/article/2011101/review-chronosync-4-3-5-a-multitalented- file-sync-and-backup-tool.html) "I would like to see ChronoSync go one step further and offer an option found in some other sync software: the ability to watch specified folders and synchronize changes as soon as they occur rather than waiting until the next scheduled run." Can anyone point me to the "other sync software" that offers this capability?
    Thanks in advance
    Brian Catterall

    SOLVED
    Once I got Time Machine to perform totally new backups it picked up the new external drive containing my images.
    John

  • Fetching data from one BI server to another

    Hi All,
    We have BCS environment on top of BI. We have a request from Client to refresh the BCS data in our quality box (copy of BCS production data). Data wasn't refreshed to our Quality system regularly from SAP Quality and hence we thought of complete BI Production copy to our Quality box.
    Since the above strategy is time consuming,we have been contemplating on other options and have stumbled upon SAP blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21489. [original link is broken] [original link is broken] [original link is broken]
    The blog talks about pulling data from one BI server to another. As BCS is such a fragile environment, wanted to take an opinion on whether you all see any concerns with the approach.
    Regards,
    Vivek Das Gupta

    Hi,
    W have done the system copy from production to QA system and only faced authorization issues  and also we follwed the same blog and as mentioned in the blog dont forget below points before going ahead for the system copy.
    switch the source Real Time Infocube (in MBP) if you want to copy all latest productive data, that is to say including those which were contained in the open request.
    For data consistency reasons and to avoid any risk of error, the loading process is executed in Full.
    If you planning to copy only a part of the source data records,  set filters in the infopackages.
    Hope it going help you
    Thanks

  • Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

    Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

    Check exception list of your Firefox password Manager and check if your site is there or not?
    * http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

  • Question about tranferring data from iPhone 3gs to iPhone 4

    I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
    First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
    Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
    Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
    ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
    MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
    Thank you in advance, sorry for the long post.

    If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
    Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
    iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
    I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

  • In finder cannot easily change files from one folder to another. Drag and drop does not work. There should a cut and paste feachure.

    In finder I cannto easily change files from one folder to another.  There should de a cut and paste for this.  Not drag and drop. thanks P.

    paulfromqueretaro wrote:
    In finder I cannto easily change files from one folder to another.  There should de a cut and paste for this.  Not drag and drop. thanks P.
    OS X is all about keyboard shortcuts.
    To cut       cmd+x
    To copy     cmd+c
    To paste    cmd+v
    With the Mouse, hold command and drag to your destination.

  • How can i change the data from one Time Capsule to another?

    How can i change the data from one Time Capsule to another?

    Do you mean copy it?  If so, see #18 in Time Machine - Frequently Asked Questions  You'll need section 2 there.
    If you mean something else, please clarify.

Maybe you are looking for