Question about Cisco Works LMS 3.2

Hi Mr Joe Clarke,
Can CiscoWorks 3.2 discover and monitor non-Cisco devices too? Non-cisco brands such as Hirschmann, 3com and HP.

RME and the Health and Utilization Monitor add-on can do some monitoring of non-Cisco devices, but LMS is designed for Cisco-only networks.  Managing non-Cisco devices will give you very limited functionality, and will count against your overall license.

Similar Messages

  • Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

    Hi All,
    We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
    Any help would be appriciated.
    Thanks in advance
    Samir

    Hi,
    *** Device Details for d0151-100 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> TFTP,SSH,HTTPS
    Execution Result:
    Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
    This is the error while doing syn archieve.
    I am not sure about Rtr7000 version but we have latest Rtr7000.
    Waiting for your kind reply.
    Samir

  • Cisco Works LMS R3.1 with ACS R5.1

    I search on internet about the AAA integration between LMS R3.1 y ACS R5.1, and all the information that I found it's related to ACS R4.1. It's possible to integrate with ACS R5.1.
    Regards and thanks in advanced
    Luis Martinez

    Nael,
    Sorry to batter you, but I was trying to migrate my Cisco Works LMS R3.1 to R3.2 and from the support page of CISCO I just can donwload the following version LMS R3.2.1 (LMS R3.2 service pack 1). I tried to install that version but i got an error that saids "LMS R3.2.1 needs LMS R3.2 installed on the server"
    Could you please tell me where can I download the complete and initial LMS R3.2.
    Thanks in advanced for your kindly help.
    Luis Martinez

  • Cisco Work (LMS 2.6) Device Configuration

    Hi,
    Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
    Thanks & Regds,
    Lalit

    if you enable the so called shadow directory feature under:  Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
    then the defaut location is \CSCOpx\files\rme\dcma
    Cheers,
    Michel

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.
    Samir

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • Cisco Works LMS 3.1 Integration with ACS v5.2

    Hello Experts,
    our customer has a working integration with the Cisco Works LMS 3.1 and an ACS v3.3 as it is described in this document:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
    Now we are changing the old ACS Servers to the new ACS v5.2 platform. Is it possible to integrate the LMS to the new ACS Server? We want to use a granular user access restriction for SuperAdmins, Hotline Users an so on...
    Thanks,
    Florian

    Hi Florian,
    actually the ACS 5.2 is not supported in CS 3.2
    here is a list of the supported ACS servers under LMS 3.1
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.2/user/guide/admin.html#wp865998

  • Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability

    Cisco works LMS 4.0 ,Apache HTTP Server CVE-2011-3192 Denial Of Service Vulnerability
    This vulnerability has been fixed in release apache 2.2.20 and further corrected
    in 2.2.21. You are advised to upgrade to version 2.2.21 (or newer) or the
    legacy 2.0.65 release,
    Can any one give the steps to upgrade the apache http server 2.2.10 to 2.2.21 in windows 2008 server?

    For the following PSIRT:
    http://www.cisco.com/en/US/products/csa/cisco-sa-20110830-apache.html
    Download the following patch "lms40-win-Oct2011-su1-0.zip" :
    http://www.cisco.com/cisco/software/release.html?mdfid=283434800&flowid=19062&softwareid=280775103&os=Windows&release=4.0&relind=AVAILABLE&rellifecycle=&reltype=latest
    The instructions should be in the zip file how to install the patch.
    This should cover all theses bugs that you can query in the bug tool kit:
    http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    CSCte45565
    CSCto12712
    CSCto23584
    CSCto23622
    CSCto35544
    CSCto35577
    CSCtq48990

  • Cisco Works LMS HUM issue

    Hi,
    I am using Cisco works LMS 3.1 with HUM 1.1.0. I am receiving thresold and job schedule mail alert from HUM.
    It is showing error in JOB history  “Not able to connect the mail server” while alerts from RME,IPM,CS,DFM are coming on mail.
    I have Configured HUM just 3 days back and all others application had been configure 4 months back.
    Please help.
    Regards,
    DJ

    Hi Clarke,
    Thanks for response. Please see the attached HUM smtp error. I have tried the HUM JOB with sniffer to filter smtp port 25 traffic but nothing is reflecting
    in sniffer when trying to send mail through HUM while DFM,RME IPM mail are showing in sniffer and we are getting mail as well.
    I have upgraded HUM version from 1.1.0 to 1.1.2 but the error is same.
    Regards,
    Dinesh Joshi

  • Need to do switches configuration archive using the cisco works LMS 3.2

    Hi folks,
            We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
    Guide me what are the things to be done in both switch side and RME side.

    Hi Mohammed,
    You can do this from here :
    RME > Admin > Config Mgmt > Archive Mgmt
    check the below linlk for more information:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/config.html#wp1070778
    Thanks-
    Afroz
    [Do rate the useful post]

  • Cisco Works LMS

    Can you monitor Mitel IP Tel on a Cisco router and switching environment? Customer has Mitel Voice but Cisco routers and switches. Will Cisco Works LMS provide functionality?

    See this page for a list of LMS white papers:
    http://www.cisco.com/en/US/products/sw/cscowork/ps2425/prod_white_papers_list.html
    You should fine some deployment guides for each of the various versions.  Those will help get you started.

  • System Requeriments Cisco Works LMS 2.5

    Hi
    I need to know if the Cisco Works LMS 2.5 can be instaled in a Windows 2003 Server whith Service Pack 2 or i need to work whithout the SP2
    Thank?s

    LMS 2.5.1 is supported with windows server 2003 SP1or later
    http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_upgrade_guides_chapter09186a00805af1dc.html#wp1032750

  • Cisco Works LMS 4.0 doesn´t start

    Hello All
    i have big trouble with me LMS 4.0 installation. I did an Upgrade from LMS 3.2 to LMS 4.0. After that the Works was running without any problems. After some days i´d tried to login on the LMS and it told me something like my lincens where corrupt or so. I´d tried to start the CiscoWorks Demon Manger but he didn´t start. OK after some investigation at the i-net i decided to perform a clean installation of the Server an Cisco Works.
    So after i do thes i´d perform a restore of my old Data from LMS 3.2. Now i investicated that my ANI Server Falied to start. OK than i tried to restart the Works Demon ... f... and what will happend ?!?!?! The demon doesn´t start. Can someone help me ?!?! Please i will not perform a new istallation again.
    C:\Windows\system32>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Thanks
    Mario
    Hi i have an update for this issues ... After i´d tried to start all Works- Services be hand ... all Services will start execpt the deamon ... When i loged in i get messages "License Server/Deamon Manager is down. Please  check license.log for more information."
    Thats the same situtaion befor the new installation.

    Hi Afroj
    i´d just have an update for you and maybe for Martin. I´d checked the services and investigate that the ANIDatabase Engine
    was not stoped. After i stoped the service "by Hand". I tried to reinalize the Database and see ... IT WORKS ...
    D:\CiscoWorks\CSCOpx\bin>perl.exe dbRestoreOrig.pl dsn=ani dmprefix=ANI
    WARNING: Existing contents of ani database will be lost.
    Do you want to continue [y/n]?y
    INFO: Starting the DataBase
        Starting database engine aniEng
    INFO: Process created
    INFO: Started the Database engine : aniEng Retry 0
    INFO: Started the Database engine : aniEng Retry 1
    INFO: Started the Database engine : aniEng Retry 2
    INFO: Started the Database engine : aniEng Retry 3
    INFO: Started the Database engine : aniEng Retry 4
    INFO: Started the Database engine : aniEng Retry 5
    INFO: Started the Database engine : aniEng Retry 6
    INFO: Started the Database engine : aniEng Retry 7
    INFO: Started the Database engine : aniEng Retry 8
    INFO: Started the Database engine : aniEng Retry 9
    INFO: Getting message
    INFO: Connect the database dsn=ani
    INFO: Connected the Database
    INFO: Command Executed
    INFO: Connecting the Database ani
    INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4f
    e3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
    INFO: Preparing AUTH cmd
    INFO: AUTH Executed
    INFO: AUTH cmd finished
    INFO: Stopping the Database engine ani
        Stopping database engine aniEng
    INFO: File not exists.SQL Anywhere Command File Hiding Utility Version 10.0.1.40
    51
    INFO: Database [ani] authenticated successfully.
    ani database initialization is completed.
    D:\CiscoWorks\CSCOpx\bin>
    D:\CiscoWorks\CSCOpx\bin>pdshow ANIServer
            Process= ANIServer
            State  = Running with busy flag set
            Pid    = 11136
            RC     = 0
            Signo  = 0
            Start  = 8/22/2011 1:01:29 PM
            Stop   = Not applicable
            Core   = Not applicable
            Info   = ANIServer started.
    Many Thanks for your help ...
    Regards
    Mario

  • Basic questions about CISCO IOS

    Hi everybody, Jack here,
    I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
    Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
    I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
    Thank you all so much for reading through the wall of text:)
    Jack

    Jack
    Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
    If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
    If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
    I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
    HTH
    Rick

  • Some question about Cisco Prime Infrastructure

    Dear all
    I have some question about using Cisco prime Infrastructure:
    - Can I show how many user access to one Access Point (AP) ?
    - If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
    - How many time do Cisco Prime Infrastructure refesh user  informantion .?
    Please help me and send picture about it if you can.
    Thank you so much.

    Hi,
    I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
    1- You can surely find how many clients associated to a specific AP.
    - Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
    3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Cisco ASA go Out of Sync through Cisco works LMS 2.6

    Cisco works startup/running Out of Sync on Cisco ASA.

    Hi,
    The problem description is a bit sparse.  However it is important to note that the last day for support on LMS 2.6 was June 30, 2011.
    Here is a link to the End of Life announcement.

Maybe you are looking for