Question about compatible Satellite C870-15Z internal display

Hi,
Last month, my laptop screen broke for no clear reason.
Since I know that this isn't covered by the warranty and constitutes fall damage, I've been searching for a replacement screen.
Now the problem I've run across is that I don't seem to find replacement screens for my laptop model itself (C870-15Z), but I do find screens for e.g. a C870-11H.
Is this screen compatible with my laptop or do I need to search for one that is specifically made for my C870-15Z?
Regards,
Vic
Message was edited by: Vic Vandeweyer

Both notebooks Satellite C870-15Z PSC8EE and Satellite C870-11H PSC8AE were equipped with the same kind of display: 17.3" (HD+) 1600 x 900 backlight LED
Therefore I think you can take the display for Satellite c870-11H too.
Greetings

Similar Messages

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A few questions about using PS3 with 27" iMac display...

Hey people, I had a few questions about how I could possibly get my ps3 connected to the iMac's 27" screen. First of all, could you guys list some adapters that would be able to convert the HDMI to Mini displayport? That would be great. The only one I know of is that Dr. Bott Digital Video link.
Okay secondly, I was wondering if I do get the the ps3 connected with the iMac's display with an adapter to convert HDMI to mini DisplayPort, would it be in HD? Would I be able to play ps3 games or watch blu-ray movies in 1080p HD format?
Thanks!

Welcome to the Apple Discussions!
This has been asked a number of times here since the intro of the 27" iMac. The answer is very expensive US$149 or more converters and sometimes even more expensive to maintain the resolutions that you seek.
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
Dah•veed

Question about XML mapping to ABAP internal table

Hi experts.
I'm trying to XML mapping. But it doesn't work well. Assume there are XML file as below.
<HEADER>
<ITEM>
    <FOO>123</FOO>
    <BAR>ABC</BAR>
</ITEM>
<ITEM>
    <FOO>456</FOO>
    <BAR>DEF</BAR>
</ITEM>
<HEADER>
and I want to trasformation it as below.
ITAB
FOO       |      BAR
123         | ABC
456         | DEF
How could I trasformation using "call transformation"?
Regards.

Hi,
REPORT zind_xml_to_sap NO STANDARD PAGE HEADING.
Data Declaration                                                    *
DATA: client      TYPE REF TO if_http_client, "Interface
      host        TYPE string,
      port        TYPE string,
      proxy_host TYPE string,
      proxy_port TYPE string,
      path        TYPE string,
      scheme      TYPE i,
      xml         TYPE xstring,
      response    TYPE string.
DATA: t_xml       TYPE smum_xmltb OCCURS 0 WITH HEADER LINE. "XML Table structure used
                                                              "for retreive and output XML doc
DATA: g_stream_factory TYPE REF TO if_ixml_stream_factory.    "Interface
DATA : return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.      "XML Table structure used for retreive
                                                              "and output XML doc
Parameters                                                          *
PARAMETER : p_add TYPE string LOWER CASE ,
            p_dfile   LIKE rlgrap-filename.
AT Selection-Screen on value-request for file                       *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dfile.
Get file
PERFORM 100_get_file.
Start-of-Selection                                                  *
START-OF-SELECTION.
Perform to upload xml data from URL to SAP internal table
PERFORM 200_xml_upload.
IF t_xml[] IS NOT INITIAL.
Perform to Download data from Internal Table to a text file in local drive
    PERFORM 300_download.
    write : / 'Data Uploaded to Internal Table Successfully'.
    write : / 'XML Data Downloaded to Local path', p_dfile.
else.
    write : / 'No Data for upload'.
ENDIF.
*if t_xml[] is INITIAL.
WRITE : address, 'Given URl cannot be Converted' .
else.
LOOP AT t_xml .
   WRITE: t_xml-cname, t_xml-cvalue.
ENDLOOP.
endif.
*&      Form get_file
      Get File
FORM 100_get_file .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
    PROGRAM_NAME        = SYST-CPROG
    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = ' '
   IMPORTING
     file_name           = p_dfile
ENDFORM.                    " 100_get_file
*&      Form 200_xml_upload
      form to upload xml data from URL to SAP internal table
FORM 200_xml_upload .
*Check HTTP:// and concatenate
IF p_add NS 'http://' OR p_add NS 'HTTP://'.
    CONCATENATE 'http://' p_add
                INTO p_add.
ENDIF.
Fetching the address of the URL
CALL METHOD cl_http_client=>create_by_url
    EXPORTING
      url    = p_add
    IMPORTING
      client = client.
*Structure of HTTP Connection and Dispatch of Data
client->send( ).
*Receipt of HTTP Response
CALL METHOD client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3
      OTHERS                     = 4.
IF sy-subrc <> 0.
    IF sy-subrc = 1.
      MESSAGE 'HTTP COMMUNICATION FAILURE' TYPE 'I' DISPLAY LIKE 'E'.
      EXIT.
    ELSEIF sy-subrc = 2.
      MESSAGE 'HTTP INVALID STATE' TYPE 'I' DISPLAY LIKE 'E'.
      EXIT.
    ELSEIF sy-subrc = 3.
      MESSAGE 'HTTP PROCESSING FAILED' TYPE 'I' DISPLAY LIKE 'E'.
      EXIT.
    ELSE.
      MESSAGE 'Problem in HTTP Request' TYPE 'I' DISPLAY LIKE 'E'.
      EXIT.
    ENDIF.
ENDIF.
Get data of the xml to Response
response = client->response->get_cdata( ).
*FM converting the XML format to abap
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      text   = response
    IMPORTING
      buffer = xml.
*FM converting XMl to readable format to a internal table.
CALL FUNCTION 'SMUM_XML_PARSE'
    EXPORTING
      xml_input = xml
    TABLES
      xml_table = t_xml
      return    = return.
ENDFORM.                    " 200_xml_upload
*&      Form 300_download
*form to Download data from Internal Table to a text file in local drive
FORM 300_download .
DATA filename TYPE string.
filename = p_dfile.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = filename
    WRITE_FIELD_SEPARATOR           = 'X'
TABLES
    data_tab                        = t_xml
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.

Question About Previous iMac vs New iMac Display

I just purchased a refurbished iMac 27" a few days ago. It arrived. I am having trouble visually adjusting to the screen. I've done extensive research on this topic already and have seen others with the same issue. I have heard numerous reasons for the blurry vision, headaches, etc, some attributing to a gap between the glass and the display, or the glare issue. I'm considering downsizing right now to a 21" to see if that will at all help, but I noticed with the new iMacs, they are advertising the following for the display:
"You won’t want anything to distract you from what you’re viewing on these big, beautiful 21.5- and 27-inch displays. And nothing will, thanks to a new display design that reduces reflection by 75 percent. In addition, because the LCD now sits right up against the glass, your content seems to leap off the screen."
75 percent less reflection.
Full lamination has a second major benefit: It eliminates the reflection of light off the LCD panel and off the back of the display’s cover glass. But we also figured out how to reduce reflection off the front of the glass without compromising color quality. Instead of applying an antireflective coating to the glass in a conventional way, we adapted a process used on smaller surfaces like camera lenses and fighter pilots’ helmets. It’s called plasma deposition, and it involves coating the glass with layers of silicon dioxide and niobium pentoxide so precise and so thin they’re measured in atoms. The result: an astounding 75 percent reduction in reflectivity — and vibrant, accurate colors.
Is this new design made to solve the problem I am facing? Thanks for the help!

I recently had an eye examination done, and it came back perfect. This is the previous monitor I used: http://www.walmart.com/ip/AOC-931SWL/13890785
I get that it's completely different, but it didn't cause me any eye strain at all. I also tried calibrating the color, right now it's really warm, with less blue LEDs, and it's easy on the eyes, but it's definitely, still a problem.
I know that some people don't have any problem with them at all, but some others are having the same issue, but I am just trying to figure out if what Apple has done with the change in the new iMac is their solution to the problem.

Question about reading csv file into internal table

Some one (thanks those nice guys!) in this forum have suggested me to use FM KCD_CSV_FILE_TO_INTERN_CONVERT to read csv file into internal table. However, it can be used to read a local file only.
I would like to ask how can I read a CSV file into internal table from files in application server?
I can't simply use SPLIT as there may be comma in the content. e.g.
"abc","aaa,ab",10,"bbc"
My expected output:
abc
aaa,ab
10
bbb
Thanks again for your help.

Hi Gundam,
Try this code. I have made a custom parser to read the details in the record and split them accordingly. I have also tested them with your provided test cases and it work fine.
OPEN DATASET dsn FOR input IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET dsn INTO record.
PERFORM parser USING record.
ENDDO.
*DATA str(32) VALUE '"abc",10,"aaa,ab","bbc"'.
*DATA str(32) VALUE '"abc","aaa,ab",10,"bbc"'.
*DATA str(32) VALUE '"a,bc","aaaab",10,"bbc"'.
*DATA str(32) VALUE '"abc","aaa,ab",10,"b,bc"'.
*DATA str(32) VALUE '"abc","aaaab",10,"bbc"'.
FORM parser USING str.
DATA field(12).
DATA field1(12).
DATA field2(12).
DATA field3(12).
DATA field4(12).
DATA cnt TYPE i.
DATA len TYPE i.
DATA temp TYPE i.
DATA start TYPE i.
DATA quote TYPE i.
DATA rec_cnt TYPE i.
len = strlen( str ).
cnt = 0.
temp = 0.
rec_cnt = 0.
DO.
* Start at the beginning
IF start EQ 0.
    "string just ENDED start new one.
    start = 1.
    quote = 0.
    CLEAR field.
ENDIF.
IF str+cnt(1) EQ '"'. "Check for qoutes
    "CHECK IF quotes is already set
    IF quote = 1.
      "Already quotes set
      "Start new field
      start = 0.
      quote = 0.
      CONCATENATE field '"' INTO field.
      IF field IS NOT INITIAL.
        rec_cnt = rec_cnt + 1.
        CONDENSE field.
        IF rec_cnt EQ 1.
          field1 = field.
        ELSEIF rec_cnt EQ 2.
          field2 = field.
        ELSEIF rec_cnt EQ 3.
          field3 = field.
        ELSEIF rec_cnt EQ 4.
          field4 = field.
        ENDIF.
      ENDIF.
*      WRITE field.
    ELSE.
      "This is the start of quotes
      quote = 1.
    ENDIF.
ENDIF.
IF str+cnt(1) EQ ','. "Check end of field
    IF quote EQ 0. "This is not inside quote end of field
      start = 0.
      quote = 0.
      CONDENSE field.
*      WRITE field.
      IF field IS NOT INITIAL.
        rec_cnt = rec_cnt + 1.
        IF rec_cnt EQ 1.
          field1 = field.
        ELSEIF rec_cnt EQ 2.
          field2 = field.
        ELSEIF rec_cnt EQ 3.
          field3 = field.
        ELSEIF rec_cnt EQ 4.
          field4 = field.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.
CONCATENATE field str+cnt(1) INTO field.
cnt = cnt + 1.
IF cnt GE len.
    EXIT.
ENDIF.
ENDDO.
WRITE: field1, field2, field3, field4.
ENDFORM.
Regards,
Wenceslaus.

Question about MMBE (stock overview) -- modifying the display layout (country of origin)

Dear everyone
I'm trying to change the layout of MMBE, so that it would display "country of origin" information.
Right now, this report displays the stock data for each batch. But, what I would like to display is the "country of origin" which is
specified for those batches (in the batch master data).
Would you possibly tell me how I can change MMBE for this purpose?
Kind regards,
Takashi

Hi,
Do refer the below OSS Note , which explains how you can manage the Layouts for MMBE through configuration in Point 4)..
982345 - FAQ: stock overview MMBE

Question about the new 27" LED Cinema Display and text size

Hi, I own the 24" Apple LED Cinema Display and text on the monitor is just large enough for me. Won't text on the new 27" Display be much smaller with its higher resolution?

MANY thanks for the tip.
Now then - all indications are that my Mini will NOT pass audio via the MDP Cable given the age as well as the lack of an HDMI port (I know there isn't one this rig). Unless I am missing something I don't believe there is any adapter out there that will allow the audio to now pass through the MDP Cable if the rig itself was never configured to do so.
Following links in your posting, someone recommended this:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=6331&seq=1&format=2#description
However it seems to be set up to deliver A/V to an HDMI display, and unless I am mistaken, the 27" LED ACD does not have an HDMI in. Although my MacMini does have a S/PDIF Optical Digital Audio Output I don't believe the 27" LED ACD has any kind of separate audio input (either TOS Link or even 1/8 smini stereo).
So I reckon I am SOL with regard to getting the audio onto the new monitor from the Mini and I would need to keep my present speakers set up using the 18/" mini stereo out - but the video should still work......yes?

Basic questions about macbook pro + external monitor

Hi,
I have some very basic questions about using a Macbook Pro + external display. I don't actually have them but need to know how things works.
So, here they are:
1) Can I use the external display as the main display?
2) Will the external display run with its resolution or with that of the mbook pro?
3) Somewhere I read that you cannot keep the macbook pro open and get the full resolution of the external display. Is that true ?
4) Is it dangerous to keep the mbook closed while using the external display?
5) Does the usage of the external display impact on mbook performance?
I know...a lot of questions , but would be nice if someone could help me.
Thanks.

Hi - I am presently using an external display.
To answer your questions in sequence:
1. Yes you can use the external display as your main display. The way to enable that mode is to put your MacBook Pro to sleep, attach the external display. Wake up your MBPro with the lid closed and you will see the external display as you main display. You can alternatively set the external to "Mirror" your notebook by using preferences/display.
2. The external display will run at its resolution although you can adjust and calibrate it using Preferences/Display.
3. Not true. You get max resolution on both displays. Of course you may have to tweak as mentioned above.
4. Not at all. I use this mode all the time. Just make sure you initially set up as mentioned above and your LCD on the MBPro will stay off.
5. I have not seen any performance degradation whatsoever.
Hope this helps.

Satellite A100-599 - question about display driver update

Hi,
I have a Satellite A100-599 with a NVIDIA 7600go graphic card and I have Bioshock like most of you the game crashes because of some problems with the graphic card drivers, no pb...in the meantime NVIDIA released some new patches to the Forceware and after I rechecked the Toshiba driver support database I saw a new release in the Display driver list for WinXp.
One of them seems to be from 13/09/2007. I downloaded the drivers, installed them and after I checked the driver details in the Device manager list and to my surprise the details said the drivers are from 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in the drivers archive and surprise ...the drivers are really the old ones from 2006. So my question is this: Do you have any Display Drivers for my model that work for Bioshock :D
Regards,Marian

I dont know if WE have. I think it would be took some long time to ask every single user: hey, do you have some drivers for blackmodjo? Ah, come on, please. Just a little bit of them... ;)
No, I have a better idea. Its like cooking a meal. The ingredients: DriverCleaner Pro and the website www.laptopvideo2go.com and .... ta ta ta TAAAA a lot of patience
To get some good "bio"shocked meal just follow this receipt:
Go to
http://www.laptopvideo2go.com/
read before you do anything (YES, even before you continue BREATHING) the FAQ-section on that site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
and then download the drivers. Do it, yes...
Then download drivercleaner by searching for it on www.google.com and THEN, read their Manual before doing anything else (Ok, you can continue breathing..)
After reading their manual you will something like:
1. Starting program, doing something, restarting machine
2. starting in safe mode, starting that program, removing..yadayadayada
3. Installing new driver
3. Playing Bioshock
4...
5..no..6. Thanking me and giving me your first born.. ;)
So, by cutting away around 40% of my humoristic stuff and following the constructive technical instructions from me you will be able to play bioshock.
Greets :)

Question about Wi-Fi connection speed on Satellite L30

Dear sirs,
I have purchase a Satellite L30 the WiFi card is working fine but the connection speed is 54.0 mbps, i required 100 plus mbps, can you tell me if this is possible to upgrade the internal WiFi card of this laptop and can you suggest at suitable replacement if this is possible.
Your faithfully,
Neil Quinney

Hello Neil
I can not say for sure but I believe at the moment there is no info about compatible WLAN card. If you need precise info about this you must contact Authorized service partner in your country or your local dealer. They are responsible for the upgrade.
Anyway I do not believe you will find compatible card for this low budget notebook model. Simplest solution for you is to buy suitable USB WLAN card. The installation is very simply and I do not believe you will have compatibility problems.
Bye

MMacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster

Hi ,
My MacBook Pro (13-inch, Mid 2010) switches on but internal display remains off/black .There is no start-up sound and the fan starts off normal but after about Five minutes begins to run even faster as if the machine is running a heavy load.It displayed a question mark some time back then a friend borrwed it ,he flashed the system and put windows 7.Then a few days pasted and now it wont display as stated.I have tried to Reset SMC and the Command + P + R + Power but still no response.Please assist?
Regrads Josh

I think your "friend" caused a problem (or two).
I do not know what "flashed the system" means......
Based on what was done, I would probably erase the HD and restore the system from a backup before the software changes were made.
Barry

Questions about installing a large internal hard drive

Hello all,
I recently bought a Seagate 250GB internal hard drive for my Power Mac G4 (AGP graphics). I intend to install it alongside my old 20GB drive. I have a couple of questions about installing it:
• What kind of PCI card do I need in order to use the full capacity of the drive?
• I'm considering partitioning the drive and installing Debian Linux on one partition. Is it possible that Debian won't recognize the PCI card?
• Is it possible to connect (RAID?) the old and new drives together so that they appear as one big 270GB drive? Is this a good idea?
• What is the easiest way to copy the contents of my old drive onto the new one? I'd like an exact copy so that I don't have to reinstall the system and everything else; can Carbon Copy Cloner do that?
Thanks for any help and advice!
Power Mac G4 - AGP graphics Mac OS X (10.4.3) 768 MB RAM

• What kind of PCI card do I need in order to use the
full capacity of the drive?
If the drive is an SATA drive you need an SATA controller. If an IDE/ATA drive you need an IDE controller.
• I'm considering partitioning the drive and
installing Debian Linux on one partition. Is it
possible that Debian won't recognize the PCI card?
You should check the Hardware Compatibility List for Debian against your potential mac compatible purchases. You might also get some good information from Yellow Dog Linux compatibility lists.
• Is it possible to connect (RAID?) the old and new
drives together so that they appear as one big 270GB
drive? Is this a good idea?
If you want to stripe the 2 dives together your overall performance will be slowed down by the slower of the two drives. For example, If you have one 5400rpm drive and another 7200rpm drive, the RAID will be bogged down by the slower drive so you wont get the full benefit of the lower latencies of the 7200. You will still get some of the faster transfer times, just not the lower latencies.
Wether or not it's a good idea depends on your personal needs. Do you need a drive that can can move very large files to and from memory quickly (bandwidth) or a drive that can locate and serve up the files quickly (latency)?
• What is the easiest way to copy the contents of my
old drive onto the new one? I'd like an exact copy
so that I don't have to reinstall the system and
everything else; can Carbon Copy Cloner do that?
CCC should work fine for you. You could also use the command line asr utility.

Satellite U405D - Several questions about overheat/disassembly/upgrade etc.

Hi there,
I have several questions about my one year old Satellite U405D-S2910
1- When it works, after 2-3 hours (I usually run small programs like safari, msn messenger and bsplayer) CPU gets 85-90 C (178-188 F). When I play Age of Empires 2 (Come on, its an ancient game) like 2-3 hours it shuts down itself. What could be the possible reason?? By the way, let me inform you about the climate of the town I live, temp 30C - humidity 25-35% (nowadays).
ps. Cpu= AMD Turion 64 X2 Dual-Core Mobile Processor. Model, RM-74
2- I'm going to disassemble my laptop in order to clean its cooling units (I think reason of overheating is this). It doesnt seem like a desktop, so complicated. Ive seen a step-by-step disassembly(btw, its so hard to spell disassembly:) I think Im going to do this. What are your suggestions about it? any experiences could help me?
3- My laptops Ram memory consists of 2X2GB PC5300 DDR2 667 MHz SDRAM, I want to replace it to 2x2GB MACH XTREME DDR2 1333MHZ CL9 NOTEBOOK RAM. Should I do it? Does it fit my laptop, work stable? any suggestions?
ps. mainboard chipset AMD M780V
4- finally :) , Should I use 64 bit OS or 32 bit OS (win7)? what OS would you use if you were me?
Thank you.

Hi buddy,
1+2. I think everything is related to a higher internal temperature and you should clean your notebook using compressed air spray. Therefore its not necessary to disassemble it, just blow gently and shortly the air through the notebook. You can buy such compressed air spray from every computer store I think and it takes only 5 minutes.
You can find an useful article about this here:
3. In my opinion you should forget this update! The RAM speed is related to FSB of CPU and as far as I know on Satellite U405D its 667MHz so its already the fastest RAM that you can have. Save your money and buy a bigger HDD or in best case an SSD that can really improve the performance!
4. In my opinion the answer is clear: Windows 7 64bit.
Only a 64bit OS support full 4GB RAM. ;)

Some question about International Travel

Ok so i know alot of people have question about international travel weather is USA to Canada, Canada to USA or where ever.
So i just got off the phone with someone from AT&T these are my questions for them. i hope it can help, im confuse myself.
*1. I travel recently travel to canada a few weeks ago, when i cross the boarder i switch the data roaming ON and it picks up Rogers Wireless, a few days ago i try i again it said NO SERVICE is something wrong with my iPad?*
NO, consider yourself lucky u didnt get charge for that roaming, your ipad well not work out of the US unless u buy one of our International plans that AT&T has provided. The reason for this is so you wont have any unwanted charge or high charge on your bill.
*2. If i was to buy a sim card from Canada and pop it in to my US ipad well it work?*
Honestly that's something you can try at your own risk, it's design for AT&T so by switching sim cards it may affect your ipad such as running slow, virus, crash. You can try it, i dont work for Rogers so i know nothing about them, i work for AT&T so i can only tell you about our plans and i wont lie to you.(I THINK U JUST DID) This ipad is not unlock just like the iphone so it well only work with AT&T.
*3. If i pop my sim card out and put in an international sim card well it affect my plan at all or in any way?*
Yes it can, right now your on the unlimited plan if you put in a different sim card and then re-put in ur AT&T one chances are you're going to loose your unlimited plan and have to settle for the newer plan. That's why AT&T has reduce it's international plans so people are more likely to use it. It's a contract we sign with Apple, if u want to use in canada you can always buy an Ipad in canada and use their plan. (***)
At the end of this conversion i was just more angry with them. All in all she told bottom line is dont do anything stick with AT&T and pay for international plans. So i have to pay over price data plan if i want to use it intertanional? or i have to buy an ipad for each international places i go to?
Has anyone try or done any of the 3 ive mention and did it affect ur plan or ipad in anyway?
Thanks
Andy

Ok so here's a little more info
I called AT&T again today asking them the same question the guy was more helpful then the one yesterday. Even though he kinda told me the same saying that the ipad need to be unlock. , Afterward he transfer me someone from Apple. The lady told me
1. The ipad is UNLOCK so dont bother trying to get it unlock.
2. she doesnt see why sticking in another sim card from one of the apple ipad carrier is a problem. U would just have to sign up activated it like u would when u first got it.
3. Contact phone company (my case Rogers) to see if they carry the mico sim cards.
4. She doesnt see why it would affect the current plan u have now.
So at the end of all that she told me, seem like AT&T is just telling you, you cant do this or u shouldnt do that is simple THEY WANT YOU TO USE THEIR PLANS.
so with that i said i just want to let everyone know. I'm gonna go pick my Micro sim cards from Canada in a bit and sign up for thier plan we'll keep everyone updated if anything change or how it work

Question about compatible Satellite C870-15Z internal display

Similar Messages

Maybe you are looking for