Question about configuration (ATI 5770) w/ 3 monitors

Ok I already know how to get three monitors running on the ATI 5770. I have one native mini DisplayPort, one mini DisplyPort to VGA and one native DVI or DVI to HDMI. What I need to know (before I buy another native mini DisplayPort monitor) is if the 5770 can run two native mini displayPort monitors and a native DVI? Has anyone done this?

i am currently running 3 displays on my macpro 1,1 with a 5770 card. here is my setup
mini display port to dvi (dual link active from monoprice) to an Acer 24" monitor
mini display port to dvi (sme as about) to and dvi to hdmi adapter to 65" 1080i television
dvi port to Acer 24" monitor.
i have to set it up this way because if i set both monitors to mini display port adapters and the tv to the dvi to hdmi adapter one of the monitors will not come on. setting it this way all three monitors are working. the only problem that i have is that my tv monitor flickers like the computer is refinding it all the time. i haven't really had a chance to look into it too much, but i can tell you that without the active link adapters only two of the three connections will work at one time.
hope this helps

Similar Messages

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Question about using iMac 2011 as a monitor

hi ,, i have imac 2011 21'5
can i use as a monitor to play xbox 360 on it using mini displayport to hdmi cable ??
if no then is there way else i can play xbox on my imac screen

Frank:
Thanks so much for responding! One question about your post. When you say that the Mac Mini cannot boot in OS 9, does that mean that if I wanted it to hold Filemaker Pro 4 files (which runs on OS 9), that it cannot do this? We would not be running Filemaker on the Mini, just storing the files. We would run Filemaker off of our desktop computers. Sorry, I don't know a ton about computers, so sometimes I need clarification about the terms that people use.-Rob

I have a question about Configuration of Post with Clearing

I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.

Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks

Question about Network In/Out in the Monitor of the Cloud Service

Hi there
My question is that what kind of data is the monitor monitoring? The monitor is in the cloud service.
And what are network in/out in the monitor stand for? The network in/out are in the monitor.
The monitor had monitored a huge amount of data in my cloud, but I have no ides what are they.
Thanks a lot!

hi Tianchi,
Thanks for your posting!
>>what kind of data is the monitor monitoring? The monitor is in the cloud service
From the concepts side, By default, minimal monitoring is provided for a new cloud service using performance counters gathered from the host operating system for the roles instances (virtual machines). The minimal metrics are limited to
CPU Percentage, Data In, Data Out, Disk Read Throughput, and Disk Write Throughput.
If you want to monitor other metrics, you could use the azure Diagnostic to custom
performance counter in your cloud service or set
Verbose setting on the azure portal. For this issue, I suggest you could refer to the concepts part of this page (http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
>>And what are network in/out in the monitor stand for? The network in/out are in the monitor.
Base on my understanding, Network in/out include the
performance counter "Bytes receive" and "Bytes send". Maybe it seems that your data size of network in/out is huge amount. But only your outbound data
can be charged. Of course, if you have some doubt about data or data billing, you could contact Azure Billing support for more details.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Question about configurations in Old Server

Dear All,,
I have a Question !
How will you find what are the configuration are in a server.. for example..
Is the DB configured RAC or DATA guard ?
Is RMAN configured or not ?
because at any time we have to face this request for Client who they don't have details regarding their Server,, (in Old Support Projects).
if i have a plan for a upgradation of database what are the documents i have to prepare and what are the steps i have to take at initial stage !
Regards
HAMEED

Hameed,
This should be documented and those documents should be provided by the clients.
You could do some investigation but again this will not be correct or complete without the documentation. For example, for RAC you could query the dynamic views (gv$instance, v$instance on each node) but this assume you already know what servers are configured. Or, you could refer to the RAC/DataGuard/RMAN configuration MOS docs for Oracle E-Business Suite and go through the steps to verify if those configurations are presented or not.
Thanks,
Hussein

Question about configuring REST web service in EBS instance

I am from EBS SCM team. From one wiki page, it says OA Framework provides REST framework to expose OAF BC4J objects as web services. Can you provide more details about how to configure REST web service for one EBS instance? Any related information is also helpful.
Edited by: 936859 on Sep 7, 2012 5:45 PM

IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

The question about configuration Organization Unit on spro

Dear all.
I want to configuration Organization Unit on spro so I have created O.Units, Jobs and positions on Personnel Administration->Organizational Assignment->Organizational Plan but I can't see these values about O.Unit, job and position on SAP Access Easy .
How to see these values on SAP Access Easy ?
Can I input these values about O.Units, Jobs and positions on spro ?
Thanks so much.
Huyen Nguyen

instead of that
Define the Number ranges
in OOCR
for all the objects
Make a Template for Objects and Object Id
and upload the same thru PP01
than all the enties will sit in the SPRO
>note it is not mandatory to create thru SRPO wht in case if u have 4000 to 5000 Employees
So the best way is upload the Data thru LSMW thru Proper objects and Relatioships

Question about using FaceTime with an external monitor!

Greetings!
Is it possible to use a third party webcam for FaceTime chat when connected to an external monitor?
I am currently using a mid-2012 macbook pro.
Thank you!

ThatKid26 wrote:...Is it possible to use a third party webcam for FaceTime chat when connected to an external monitor?...
Yes if the camera is Mac compatible. It will work with an Apple external monitor with camera.
As shown in this image using my old Mac Pro and LED Cinema Display:
when your Mac recognizes more than one connected camera, you can select the camera you want by clicking the appropriate item in the FaceTime > Video menu item.
Your choices will be different. In your case of using a MPB, you may also see its built-in FaceTime HD camera. However, you will be able to choose from compatible cameras that your Mac recognizes.
If you haven't yet bought, take your MBP along when you shop so you can try before you buy. That way you will KNOW the answer to your compatibility questions.
Message was edited by: EZ Jim
Mac OSX 10.9

Questions about configuring sshd

I checked the server admin manual and didn't find much detail on this topic. I took a look at the man page for sshd, but didn't really understand everything I read. Hoping someone here can help me understand how to configure sshd in OSX. I'm pretty new to OSX, but I have some experience working with Linux hosts. Working with sshd seems a little different on OSX.
I need to adjust the system wide setting to timeout inactive SSH sessions. Currently a stale session will hang open for ever. I need to set the timeout to 15 minutes. Where/How is this done? Is this done in /etc/ssh_config by setting a value for "ConnectTimeout?" Is this seconds or minutes?
How do you restart sshd after making changes to the config?
What is the difference between /etc/ssh_config and /etc/sshd_config?

First off, there are two config files of interest here:
/etc/ssh_config - configuration file for the ssh client
/etc/sshd_config - configuration file for the ssh server
If you make a change to sshd_config then the change will apply to all connections made to this server. Making changes to ssh_config affect outgoing connections initiated by this machine.
So the first question is which file to edit.
If you want to control this at the server side (so idle connections are terminated by the server) then edit /etc/sshd_config.
All the options are covered in the sshd_config man page:
# man sshd_config
Specifically, I think you're looking for a combination of ClientAliveInterval and ClientAliveCountMax.
ClientAliveInterval sets how frequently SSHD checks the client connection. If ClientAliveCountMax tests are performed without any response the connection is closed.
So, for your 15 minute disconnect you could set the ClientAliveInterval to 300 (5 minutes = 300 seconds), with a ClientAliveCountMax set to 3 (you don't want to set it to 15 minutes/1 Max since any temporary network delay could cause the connection to drop).
To control this from the client side, the corresponding parameters to add to /etc/ssh_config are ServerAliveInterval and ServerAliveCountMax.
How do you restart sshd after making changes to the config?
Changes are dynamic, and applied to each new connection (i.e. the next time you log in it will use the current sshconfig/sshdconfig settings).

Question about configuration of NAT on ASA

Hi all,
I have ASA config with DHCP and its providing IP to users.
ASA is connected to 3550 switch it has direct connection or say default static route
From 3550 switch connection goes to Router and it does the NAT and has connection to outside world.
My question is do i need to configure the NAT inside and global (outside ) on the ASA or not?
As per my understanding NAT is done by router which has connection to ISP.
Thanks
Mahesh

Hi Jennifer,
Thanks for replied.
I tested like this config the NAT on ASA
then as per your reply run the command no nat-control as ASA ver is 8.4
But nat config is still there in ASA.
I did sh xlate it shows
ciscoasa# sh xlate
27 in use, 371 most used
PAT Global 192.168.11.2(33396) Local 192.168.1.5(57177)
PAT Global 192.168.11.2(61657) Local 192.168.1.5(57176)
PAT Global 192.168.11.2(52259) Local 192.168.1.5(57175)
PAT Global 192.168.11.2(30453) Local 192.168.1.5(57174)
I did clear xlate still there is output from the sh xlate
My question is how we test that ASA is nating or not ?
Which commands can tell us that ASA is doing NAT ?
Thanks
MAhesh

Question about configuring Etherchannel on Catlyst 3750

Hi, I have a stack witch catalyst 3750, I mean I have 3 switches ( 1 master, 2 slaves)
My question
Can I configure an etherchannel having 2 interfaces on each switch?
How can I do this?
Thanks
Regards

If you have a stack it should present itself as a single switch just put channel-group 1 desirable nonsilent if you are going to another cisco on each of the interfaces you want in the channel . this is for a layer 2 etherchannel . For a layer 3 etherchannel is somewhat more involved and too long to write here , just go to the cisco.com site and search on configuring etherchannels,3750 .

Questions about configuring passwords ...

RAS-ROUTER:(config)#enable secret ?
0
5
LINE
whats the difference between using the number '0' and then typing the password from just typing the acctual password?
Thanks

hi
AFAIK u can enter the unecrypted string as the password after keying in 0 which we does normally when configuring the password.
which it does enrypt using md5 algorithm and displays in the running config.
Router(config)# enable secret cisco
Router# show running-config
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname CE
logging rate-limit console 10 except errors
no logging console
enable secret 0 $1$53Ew$Dp8.E4JGpg7rKxQa49BF9/
when u use keyword 5 in conjuntion with the command then u need to enter the encrypted keystring followed by 5.
regds

[SOLVED] Question about configuring i3

I would like to use the "Tab" key instead of the "Shift" key in a default i3 configuration with the "Alt" key as modifier. I replaced "Shift" for "Tab" in ~/.i3/config, but it doesn't work as I expected. For example, by default $mod+Shift+1 moves the focused container to workspace 1. This doesn't work when changed to $mod+Tab+1, but works if set to $mod+Tab. The userguide (http://i3wm.org/docs/userguide.html#keybindings) states the available modifiers: Mod1 to 5, Shift and Control. It seems that Mod1 is "Alt", Mod4 is "Windows", but I don't know the others. Perhaps the reason is that the "Tab" key is not set as a modifier? Would you please assist me with this and thank you in advance.
Last edited by rayanamukami (2014-05-30 17:52:18)

rayanamukami wrote:Perhaps the reason is that the "Tab" key is not set as a modifier?
That's right. Modifier keys modify input, while the Tab key sends input; If you hold down the Tab key, it will repeatedly send tabs to stdin. You can use xmodmap or setxkbmap to change around the mappings of keys. A common one which I use is setting Ctrl to the CapsLk key since, come on, how often does anyone use CapsLk?

SOLVED: Question about configuration guide

I found configuration guide in:
http://www.oracle.com/technology/products/forms/pdf/B10170_01.pdf
Is there a more recent/up to date version?
Thanks,
USA
Message was edited by:
USA

Is there a more recent/up to date version?Sure, http://download.oracle.com/docs/cd/B19375_07/doc/frs/forms/B14032_03/toc.htm

Question about configuration (ATI 5770) w/ 3 monitors

Similar Messages

Maybe you are looking for