Question about connection between cache engine and cat6k

Dear sir,
Here is the problem description, please give me some help, thank you so much:
catalyst 6509 is enable for wccp v2.CE 7320 also enable the wccp v2.Wccp service 91 is configured on 6509.Service-munber 91 and port-list 1(with port number 8080) are also configured on CE 7320.Wccp communicates well about service number 91.
but browsing web page with port number 8080 gets always failed.
1.6509 wccp configuration:
ip wccp web-cache redirect-list 30
ip wccp 91
interface Vlan10
ip address 211.162.224.2 255.255.255.240
ip wccp web-cache redirect out
ip wccp 91 redirect out
2.ce7320 wccp configuration:
wccp router-list 1 211.161.1.49
wccp port-list 1 8080
wccp web-cache router-list-num 1
wccp service-number 91 router-list-num 1 port-list-num 1 application cache
wccp version 2
3.show info. from 6509 and ce 7320:
gwbn7320#sh wccp content-engines
Content Engine List for Service: Web Cache
IP address = 211.161.1.50
Routers seeing this Content Engine(1)
211.162.224.2
Content Engine List for Service: WCCPv2 Service 91
IP address = 211.161.1.50
Routers seeing this Content Engine(1)
211.162.224.2
gwbn7320#sh statistics http savings
Statistics - Savings
Requests Bytes
Total: 90685 460066803
Hits: 936 162710
Miss: 89749 459904093
Savings: 1.0 % 0.0 %
6509-left#sh ip wccp
Global WCCP information:
Router information:
Router Identifier: 211.162.224.2
Protocol Version: 2.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 2525
Redirect access-list: 30
Total Packets Denied Redirect: 0
Total Packets Unassigned: 146
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Service Identifier: 91
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 0
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Regards,
Sha

Gilles,
Thank you!
Here is the result:
6509-left#sh ip wccp 91 detail
WCCP Cache-Engine information:
IP Address: 211.161.1.50
Protocol Version: 2.0
State: Usable
Redirection: GRE
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 180
Connect Time: 00:07:06
Regards,
Sha

Similar Messages

Question regarding connections between apple tv and receivers

All of my components run through a Yamaha receiver and then from the receiver directly to a Sharp Aquos tv. Does the apple tv also need to run through the receiver, or can it be connected using an HDMI directly into the tv. And if so, how do I get audio?

Hello W. Churchill, can you help me?
I my case my receiver does not have an HDMI connection, so I did what you said: HDMI connection from the Apple TV (3rd gen) goes directly to the TV and the receiver connected to the Apple TV via an optical audio cable. BUT, there is no sound 5.1 from my speakers! I´m sure it works perfectly because I did de same connection (por and cable) with a DVD Player...
Thanks

Question about sync between MacBook Air and iMac

I have MacBook Air and also considering getting iMac. wondering if i could manage my documents already in MBAir on iMac simultaneously. If yes, how to use it?
Thanks,
Sabahattin Bodur
[email protected]

NAS storage, or networked together, Airport Extreme
with Airport Extreme, you can have an attached HD on the back that any MAC on the network can read / write to
thats what I do, easy.
attach a HD on the back of your Airport Extreme, put files, etc etc on it for any Mac or network to use / read / write to.
Also I store movies on it that I can watch WIFI on my Macbook Air, or ipads
what fun.

Establishing a connection between SAP SRM and MM

Dear All,
I am working for a multi-national company and now we are thinking to implement SAP SRM but I have some questions about communication between SAP MM and SRM. Firstly I want so share with you our as-is status and then my doubts and question that I have.
In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this two sap system mostly codes are and descriptions are different for all materials and now we want gather all data and we want to have one global code system and (local code also will remain). I mean we want to call same materials with one global unique code instead of two different codes. We are thinking to implement something like coding center that will take local master data from local organization then will assign global code, update table then with somehow will update SAP SRM.
For example:
We have local master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
I am thinking to develeop a tool (excel,access etc.) that will take new item creation manually or auto from local organization then will assign a global code and category then will update SAP SRM automatically
Regarding to tool I have some questions:
1)     which are the standard communication channel between R/3 and SRM or How they can speak with each other ?
2)     Is there any standart batch file (BI or BAPI) to be able to perform this.Is it possible to develop tool using excel or access etc. which will manage coding task.
3)     When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
4)     how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
5)     standard program (transaction) for aligning available ?
6)     ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
7)     Where the translator (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
8)     How we can build the communication transaction?
Thank you very much
Any comments and answers will appreciated and rewarded
Regards,

Hi,
Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
Cheers
Rob

Difference between Integration Engine and Integration server.

can any 1 explained in detail about difference between Integration Engine and Integration server.
thanks in advance

Integration Server and Integration Engine are used synonymous with each other. But there is a sublte difference if you actually look into the XI architecture images provded by SAP.
The Integration Server contains,
1. Adapter Engine
2. Business Process Engine
3. Integration Engine.
So, taking this into picture I guess Integartion server is a collection of these 3 while integration engine is one of the runtime components of XI. All messages are processed in the Integration Engine.
regards
Bhavesh

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

I have a question about japan new depriciation engine using non-japanese chart of deprication

Hi, all
I have a question about link between new depriciation engine and chart of depriciation.
My client want to use US chart of depriciation as standard chart of depriciation becuase it has already standard setting like IAS deprication keys.
it means I have to create Japanese chart of depriciation by copying from US chart of depriciation(non-japanese sample(0JP))
I have a little doubt about it. In my previous project, I copyed chart of depriciation by copy from Japan sample Chart of depriciation(0JP) stored in SAP.
Is it possible to copy from non-japan sample charg of depriciation to using Japanese new depriciation engine? I worried some errors will occrues if I do not use sample chart of depriciation(0JP) .
If I need to use sample Japanese chart of depriciation, please give me the idea why I need to use Japanese sample chart of depriciation. I want to know the examples of non-Japanese asset accouting consultants who have working experience in the area.
Thank you.

Hi, Narasimhulu
Thank you for your support.
My client use one COA to all over the world. And not only Japan, other country aslo use the COD which is copied from that of US. Basic reporting line is for USGAP. I will customize 2 depriciation ares, one for US GAP and another is JGAP. No need to create TAX realted customize. It means it enought only adding Japanese new depriciation keys to Current US COD. No need to add more Japanese local requirements.
In this case, I want to know follwoing point.
I know COD controll depriciation keys, but I want to know more detail about COD, what kinds of controls COD do. What is Japanese local requirements. Why better to use COPY of JP COD.
Thank you.

Connectivity between Oracle database and client...

Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.

user11000521 wrote:
Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

Connection between data services and BWA

Hi,
I want to make a connection between Data Services 3.2 and BWA. Since we use RFC connection in between in order to have them talk with eachother but i wonder if there is any documentation that describes the RFC connection and configuration required particularly in this scenario. I have gone through the documentation that explains RFC connection between Data Services and BW and what configuration we have to do, so i wonder if there are any functions we have to export to BWA from Data Services like we do in case of BW connection to Data Services or some specific configuration we have to do. If someone help who has done connection between Data Services and BWA can help or if somebody can provide documentaton on it.

Hi,
You should ask this question over here: http://scn.sap.com/community/data-services
Regards,
H

Can't make a connection between my tv and laptop

I can make a connection between my laptop and tv as far as being able to view the picture I have as my wallpaper on the tv, but that is all. If I change the wallpaper picture on my laptop it will change on the tv also, but again that is all I can do. That is far as I can get. Just a picture, no icons, no nothing. I have connected using a 15 pin cable on both ends. I have windows xp. There must be a setting in control panel, display or somewhere but I cannot find it.
HELP

Thanks, but that didn't work. Nothing happened. This time however I completely turned off the tv and computer. When I booted up the tv screen showed my password sign in screen. I entered my pass word, The screen momentarily showed my complete desktop, both wallpaper and icons but after about a second or two it blinked and then showed only my wallpaper as before. Puzzling. There has to be an answer somewhere.
Thanks for your help.

Connection Between SAP GTS and Legacy systems

Hi GTS Experts,
Could you please let me know how to connect between SAP GTS and Legacy systems.
This is for transfer of Customers, Vendors,Materials(Products in GTS),Transaction Data.
Could you please provide any documentation on this and is it PI team will do or functional guy.
One more question:
Customer created a sales order with sold to and ship to(both contains same address) in legacy system.
Then it will be sent to SPL screening in GTS.
Now he will change ship to address and this should not be passed to SPL screening-- how to do this.
Regards,
Murali

Hi Murali,
Apart from what Dave mentioned as above, although there is no such document available apart from SAP Standard content document but its something that is very standard to other modules as well.
Actually, you need to have a middle ware like SAP PI or any non SAP Product between SAP and Non SAP Legacy system. Also, mapping should be defined well in advance in this. Then it will also involve the EDI at the SAP GTS system end and Web skills( or applicale connection skills) at the Legacy system end to ensure appropriate mapping and interchange of realistic data.
Here, I would like to know if your legacy system had already some SAP system connected to it?.
Regards,
Aman

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

I like ti known about compatibility between Windows 8 and iTunes

I like ti known about compatibility between Windows 8 and iTunes

It works for some and not for others.
At this time, there is no publicly available version of iTunes that is supported on Windows 8.
Only Apple knows when that will change.

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Question about connection between cache engine and cat6k

Similar Messages

Maybe you are looking for