Question about Contact Sheets and Version name.

When making a contact sheet, is it possible to just have the image number under each photo and NOT the words "Version Name" in front of each number?
Thanks for any help.

Hi John Cardamone;
When I saw your question I had thought I had seen it before and was wondering if there was an answer on the other posting. So I did a search which brought up your seven posting of the same question that is all.
Allan

Similar Messages

  • Contact sheets and version name

    When making a contact sheet, is it possible to just have the image number under each photo and NOT the words "Version Name"?
    Thanks.

    Hi John Cardamone;
    When I saw your question I had thought I had seen it before and was wondering if there was an answer on the other posting. So I did a search which brought up your seven posting of the same question that is all.
    Allan

  • Contact page and Version name question

    When making a contact sheet, is it possible to just have the image number under each photo and NOT the words "Version Name"?
    Thanks.

    I'm trying to find out whether this is possible as well. It's annoying having "Version Name" print out on something I'd like to show a client!

  • Question about Mail app and domain name please help

    Hi,
    I wasn't sure where to post this question so figured this would be the best area. I have a website which uses bluehost as it's web hoster. My email is set up through them, such as [email protected]
    In my Mail app, I have the POP thing set up so when ever someone emails me it goes right to the Mail app. It works great for my personal computer, but when I go to work and go on other computers is where the problem is.
    When I am on a random computer at work, I have to sign onto my webhosting site and then use squirrel mail. It is quite a hastle and is not the best. I would love to use gmail, but still keep my domain name I have.
    One co-worker mentioned just forwarding all my [email protected] emails to my new gmail email. There are issue's with doing this because if I'm at work and email someone with gmail it will use that email address. Also, I want to be able to read all my sent messages from any computer including the sent messages that were within my Mail app. Is this possible?
    Besides forwarding is there a better solution? It is sort of hard to explain. Basically I want my [email protected] address to be run through gmail, be able to access on any computer, have it be the only address in my mail app, and most importantly have the sent messages from mail app to be able to be read on all computers.
    I think gmail lets you make a domain name email, without gmail being included at the end. But I already have the email address made...am I able to just swap it? And keep all my mail inbox info?
    What's the best sollution for my problem?
    Thanks

    You would need to login to your web mail account to reply so that the email came from "[email protected]"
    I try to get a gmail address that is close to the domain name like - [email protected] - so that I don't have to bother opening web mail as it is a pain.
    I forward to Gmail and then Mac Mail because their spam blocker is the best.
    A lot of web mail addresses bounce mail because the capacity is limited and the owners don't go into their control panel to launch their web mail and clear out the old stuff. Lawyers, in particular, are famous for this. For this reason I don't set web mail to keep a copy of the forwarded mail. If my web mail gets full of spam and they start bouncing then its not my problem!

  • Question about Auto Save and Versions

    Hi. I'm running the latest version of Yosemite — 10.10.2
    My Mac seems to be auto-saving documents, but when I click the down arrow on a document's title, I don't see the options to "Revert to Last Saved Version" or "Browse All Versions."
    Since the documents are being auto-saved, I would like to have the option of reverting and browsing saved versions. Does anyone know why I'm not seeing those options?
    Thanks!

    Glad that helped!
    Yes, I believe the way you described indeed worked in previous versions of OS X.
    Enjoy your Apple gear.

  • Had to change my Apple ID because the original email address is no longer valid.  How do I change the iCloud user name on iMac?  I found instructions about signing out of iCloud and signing back end.  It asks questions about contact, etc.

    Had to change Apple ID due to email address no longer valid.  Trying to change id for icloud...saw direction online about signing out of icloud and signing back in...when it ask questions about contacts, photos, etc. being deleted how do I answer those?  That just sort of freaks me out.

    For the ones that give you an option, select the option you want (keep on the Mac or Delete). For the ones that are simply warning you, click on Delete from Mac.
    They will all come back when you sign back on, since all you did was change your existing Apple ID to a new email address. It's the same iCloud account, just with a different name.
    It's the only way to get your updated ID signed onto iCloud.
    Cheers,
    GB

  • Questions Re: (1) Creating Contact Sheets, and (2) Editing photos

    Hello,
    I have two questions about iPhoto '09:
    (1) Regarding the creation of a contact sheet, how do I select more than one photo at a time?!? I open up my photos, click on a photo to choose it. If I try to click the next photo I want on the contact sheet, the first one is un-chosen. I click File > Print > Contact Sheet, and sure enough, only the most-recently chosen photo is the only one on the sheet.
    (I have tried Edit > Select All > Print > Contact Sheet, but [as is implied in the "all" part of Select All], of course this results in a contact sheet full of photos I don't want.)
    (2) Sometimes when I pick a photo to edit, click the Edit icon at the bottom of the window, get the enlarged pic and start editing, none of my changes show up i in the enlarged image. But when I click "Done," the changes are there in the image in the album. This is annoying, since while editing, I have to click "Done" to see the effect of a change every time I make one, and then start all over with the "Edit" icon, make more changes, click "Done" to see them, etc.
    This does not happen with every photo. Weird.
    Thanks, anyone, for ideas and help.

    Light
    Welcome to the Apple user to user assistance forums
    (1) Regarding the creation of a contact sheet, how do I select more than one photo at a time?!?
    The same as all Mac selections:
    - you can click on the first of a set of contiguous photos and then depress the shift key and click on the last of the set and select all photos from the first to the last
    - you can click and drag across a set of photo to select the set
    - you can click on a photo and then depress the command (apple) key and click on additional non-contiguous photos to select them
    - you can make an album of the photos you want and display the album and select all
    and on and on and on - there are many, many ways to select multiple photos
    (2) Sometimes when I pick a photo to edit, click the Edit icon at the bottom of the window, get the enlarged pic and start editing, none of my changes show up i in the enlarged image. But when I click "Done," the changes are there in the image in the album. This is annoying, since while editing, I have to click "Done" to see the effect of a change every time I make one, and then start all over with the "Edit" icon, make more changes, click "Done" to see them, etc.
    quit iPhoto and with the finder Delete your iPhoto preference file - "your username" ==> library ==> preferences ==> com.apple.iPhoto.plist - launch iPhoto and it will create a new default preference file, set any personal preferences you want and if you have moved the iPhoto library repoint to it
    LN

  • Contact sheets with file names. How?

    Looks like I can only print out contact sheets without file names. How come?

    Because you didn't look hard enough. Make sure you check "Photo Info" and the click on the popup next to it and select filename or setup a custom text in Edit..

  • How to print contact sheet with file names

    I want to print a photo contact sheet with file names. Is this possible with any standard Mac app?

    I'd like to print the Album name at the top of each contact sheet I produce from that album - is this possible within iphoto '08 or do I need to print to a pdf and then edit that pdf with acrobat pro for example.

  • Question About Color's and Gradients

    Hi all,
    I have a question about color swatches and gradients.
    I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
    The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
    I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

    If you double click your gradient swatch (after adding it to the swatches)
    Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
    And you can alter the percentages there. It's not much use for spot colours but it's a start.
    But making tint swatches would be a good start anyway.
    At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

  • Question about clear page and reset pagination

    Hi,
    I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
    I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
    The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
    Thanks for your input.
    Patrick
    *** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
    My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

    Enhancement request filed, thanks,
    Scott

  • The question about portlet customization and synchronization

    I have a question about portlet customization and synchronization.
    When I call
    NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
    portletRenderRequest.setPortletTitle(str);
    portletRenderRequest.putString(aKey, aValue);
    PortletRendererUtil.submitEditData(portletRenderRequest, data);
    Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

    HI Dimitry,
    I dont think you have to synchronize the block. i guess the code is synchronized internally.
    regards,
    Harsha

  • Can't forward e mail is say's contact error and no names show up

    since downloading the 9.0 firefox I have not been able to forward
    e mail, it say's contact error and no names show up, this is very
    upsetting since I e mail that is important to forward.

    Oops, our posts crossed. The two main changes in Safe Mode would be: (1) disabling Firefox's use of hardware graphics acceleration, and (2) disabling all extensions. You can try to implement those manually in regular mode.
    '''(1) Hardware Acceleration'''
    Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches with various display drivers.
    You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    orange Firefox button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    If you restart Firefox, are any issues improved? I suggest keeping it disabled even if you do not see an immediate benefit.
    '''(2) Extensions'''
    Disable ALL nonessential and/or unrecognized extensions. If in doubt, disable:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    Then restart Firefox and test again.

  • A question about item "type and release" of  source system creation

    Hello expert,
    I have a question about item "type and release" of  source system creation.
    As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
    About the item "type and release",when we push "F4" button,there will be three default selections as below:
    "ORA 115     Oracle Applications 11i
    TLF 205     Tealeaf 2.05B
    XPD 020     SAP xPD".
    Who can tell me when and how should I use the three selections.
    And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
    Thank you and Best Regards,
    Maggie

    Hello DMK,
    Thank you very much for your answer.It is very helpful for me.
    Can I ask you further about it?
    I got that it is a semantic description item.
    You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
    Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
    Thank you and Best Regards,
    Maggie
    Message was edited by: Maggie

  • A few questions about the ka790gx and dka790gx

    i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

    It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section.  There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
    As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
    The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
    """Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
    Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
    The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
    For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
    Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
    It's better than nothing, but only just."""

Maybe you are looking for