Question about creating a link in a photoshop cs4 banner

Does anyone know the answer to this question??:
Does anyone know how to make a link clickable in photoshop cs4, say in a banner created in photoshop cs4, like a link to a website or an E-mail, without doing image map, but directly inside of photoshop cs4?? I need to know this ASAP!
Thank you,
Jon

HI Trevor.Dennis:
Question 1. Do you mean opening an image that I saved in Adobe Photoshop
CS4 to a folder on my computer?? Because I tried that and it wouldn't let
me do that.
Question 2. OR, since I cannot do that, how do I move an image from a
folder on my computer to InDesign??
Question 3. And then once in InDesign, how do I make links clickable??
Question 4. I'm enclosing a banner I made in Photoshop CS4 this afternoon,
and want to know how I can make
the Website: http://promoterpower.com and Email:
[email protected] in InDesign??
Let me know ASAP!!!

Similar Messages

A question about creating packages as local objects in ABAP

Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
Dariyoosh

Thomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh

A question about CREATE PUBLIC DATABASE LINK and ORA-12154 error

Dear all,
I have a problem about public database link creation and I would appreciate if you could kindly give me a hand. I have the following connection parameters in my
tnsnames.ora file:
DGPAPROD.WORLD =
     (DESCRIPTION =
       (ADDRESS_LIST =
        (ADDRESS = (COMMUNITY=tcp.world)
          (PROTOCOL=TCP)(HOST=ORASR001)(PORT=1521)
       (CONNECT_DATA = (SID = DGPAPROD))
...Having the above mentioned parameters I can connect to this remote database directly in a SQL*Plus shell:
$ sqlplus username/[email protected] works pretty well and the connection is established without any problem.
Now, what I would like to do is to create a public database link to this remote database in order to avoid the user/connection switching for viewing the
content of this database. I proceeded according to the syntax indicated in the Oracle online documentation:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_5005.htm#SQLRF01205
Therefore I run the following in order to create a public database link
CREATE PUBLIC DATABASE LINK SR001_dblink CONNECT TO user IDENTIFIED BY password USING 'DGPAPROD.WORLD';Apparently there is no error and the link is created successfully. However it cannot resolve the remote host and whenever I run the following query
(myenterprise is the name of a table in that remote database)
SELECT *
FROM myenterprise@SR001_dblink
ERROR at line 1:
ORA-12154: TNS:could not resolve the connect identifier specifiedWhat causes this problem?
Thanks in advance,
Kind Regards,
Dariyoosh

spajdy wrote:
You must have defined DGPAPROD.WORLD in tnsnames.oar on server where you DB is runnig.Hello there,
Thanks a lot for this nice solution. In fact I had to add the connection parameters into the tnsnames.ora file of the server on which the link was created (not the tnsnames.ora of my oracle client stored on the localhost)
After a bit googling I found another solution that allows to create the database link:
CREATE PUBLIC DATABASE LINK SR001_dblink CONNECT TO user IDENTIFIED BY password USING '(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY=tcp.world)
(PROTOCOL=TCP)(HOST=ip_adresse)(PORT=1521)))(CONNECT_DATA = (SID = GPAPROD)))';Thanks a lot for your help!
Kind Regards,
Dariyoosh
Edited by: dariyoosh on 18 nov. 2009 07:15

Question about "Create Item" page

Im working on trying to Insert a new item into a Self-Service Web Applications page.
As part of my research, I have been looking at this doc:
Oracle® Application Framework
Personalization Guide
Release 11i
Part No. B25439-02
From:
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115fwkpg.pdf
The document does not seem to go into much detail about how to Insert an item on a page. I also checked the "OA Component Reference" document.
I checked the online help via "Create Item Page" - e.g.
http://oursite/pls/PSAT/fndgfm/fnd_help.get/US/FND/CUST_PERSADMIN_CREATEITEM.HTM
Again, that doesn't give a lot of information.
As part of my testing / research, I would like to add a new Item to a page, and have the value of the item to be taken from an existing SQL Query.
For example, in iProcurement, when viewing a Requisition Details, e.g. via this page:
http://oursite/OA_HTML/OA.jsp?page=/oracle/apps/icx/por/reqmgmt/webui/ReqDetailsPG&reqHeaderId={!!BX6R96mkQOcfNZ60BeTaJQ}&retainAM=Y&addBreadCrumb=Y&_ti=245778094&PersonalizationParam=PersonalizationParamAdmin&oapc=12&oas=mYF7zP1VI7xoAWcUQHTEkQ..
I would like to add in the "NOTE_TO_AUTHORIZER" field from the "po.po_requisition_headers_all" table.
From looking at the "About this Page" link, I can see there is a View Object called "oracle.apps.icx.por.reqmgmt.server.ReqHeaderVO".
This ViewObject contains an Attribute called "NoteToAuthorizer" with a Type of "java.lang.String".
When I go to the "Create Item" page, and choose and Item Style of "Message Styled Text" there seems to be no way to say which database field you want to include.
From looking at a previous customisation that a developer did, I can see you can pull in an Attribute via the "View Attribute" field, and link in the VO via the "View Instance" field.
When inserting database values into a Self-Service page, can we only insert Attributes, and not any of the other regular fields from View Objects?
Apologies for the rambling essay.
Any advice much appreciated.
Thanks

Hi Jimr,
In OAF sql queries are represented by View Objects and columns of query will be represented by View Attribute.
For every column in query there will be corresponding view attribute name, so while adding any item on self service page which represents data from database you need to specify view instance name and view attribute name, which will specify which column and from which query it will show the data.
*"When I go to the "Create Item" page, I can't work out how to tell Oracle that the Item I want to create should be the "NoteToAuthorizer" field from the "ReqHeaderVO" ViewObject."* so ReqHeaderVO1 will be the instance(by default OAF generates instance like this) and "NoteToAuthorizer" can be mentioned in View Attribute name property.
Let me know if you need further clarification.
Regards,
Reetesh Sharma

Techie Question about iWeb, outbound links, and Google Analytics

Hi,
I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
1) My website's online, and GA is working properly.
2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
Anyway, hope you can help. Thanks in advance.

I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
The redirect page would be a simple plain text page titled redirect.html and would look like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="refresh"
content="0; Destination URL">
<title>Redirecting or whatever you'd like to appear at the top of the browser</title>
</head>
<body>
</body>
</html>
0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
OT

A question about creating READ ONLY users.

Dear all,
I have a question about read only user accounts and I would appreciate if you could kindly give me a hand. I have a schema named SCHEMA1. Whenever I want to connect by using sqlplus I run the following:
sqlplus user1/[email protected] SCHEMA1.WORLD is the entry in the tnsnames.ora referring to the schema SCHEMA1.
I need to create a read only user who is able to SELECT all tables and views created by user1 on SCHEMA1 (this user will not modifiy anything at all. The user is used only for a person using SQL queries to read data). for several tables I write the grants explicitly, for example:
CREATE USER user2 IDENTIFIED BY user2;
GRANT CREATE SESSION to user2;
GRANT SELECT ON S001_COR_ECLASS TO user2;
GRANT SELECT ON REF_ECLASS511 TO user2;Is there anyway to do the same thing but for all the tables (because there are a lot of tables and views)? Besides, even with these granted permissions when the user connects with SQL Developer to the database, he is not able to view the list of tables/views in SQL Developer GUI. What causes this problem?
Thanks in advance,
Dariyoosh

Hello Dariyoosh,
he is not able to view the list of tables/views in SQL Developer GUIyou can either go to "Other Users" - user1 - tables. There you see every table you have permission to select.
Or you can create a synonym in schema2 for each table in schema1 and set a filter on the tables node of user2 "Include synonyms".
Regards
Marcus

About 'create database link ...'

Dear all,
I just have forgotten to have the exact syntax for such statement. I even used this:
create database link te
connect to testdb identified by test using 'abc';
But it failed.
Thks & Rgds,
Edward

From the looks of your statement, I'm guessing that "testdb" is your instance name, and "test" is the user name. If that's right, then the statement is wrong.
It should be like this:
create database link te
connect to test identified by <tests_password> using 'abc'Of course, fill in <tests_password>.
Note that 'abc' needs to be in the local DB's tnsnames.ora file.
Tom Best

Creating a transparent GIF in Photoshop CS4

I am new to Photoshop CS4 and I'm finding it a bit of a 'challenge'.
I would like to create a transparent GIF of my signature, so that I can put it into various documents.
My signature is on a white background and is written using a blue ball point pen and is scanned in as a colored GIF file.
Despite having Googled how to do that I am completely stumped. They talk about using the lasso tool to draw around my signature (which I do) and then they say press the delete key. Well, on my iMac NOTHING happens!
Can anyone offer me a simple tutorial (for the Mac) that can walk me through creating a transparent GIF file of my signature?
Thanks,
Peter

Load luminance or the channel with the best contrast by command-clicking the appropriate channel in the Channels Panel
It seems hard to make it more clear …
Command-click (hold the command-key pressed while clicking) the composite Channel’s icon (or any of the other channels’ if you should deem them preferable) in the Channels Panel.
This should load a Selection.
I would like to create a transparent GIF of my signature, so that I can put it into various documents.
Where do you want to do that anyway (Photoshop, some layout-software, a browser …)?
Because depending on that using a file-format of fairly limited features like gif could seem inadvisable.
the problem I have with Photoshop CS4 is that when I enter the help system it goes to the web and give me help for Photoshop CS5!!!!
You should be able to download the Help as a pdf here:
http://kb2.adobe.com/cps/408/kb408379.html
If psd doen’t mean anything to you you should look it up.

How to creat a transparent psf in photoshop cs4

Creating a file which Background contents is transparent in Photoshop CS4,and save as this file in PDF or print this file in PDF,but i found the pdf file is un-transparent when opened in Acrobat, why ?
and how to create a transparent pdf file in Photoshop CS4?
and a transparent pdf file can be created easily in an early version Photoshop

The transparent pdf file created by Photoshop CS4 will be use to print over an underlying background image,nor for a web site,and can not be placed into a Indesign file
if Show transparency grid (Acrobat>preferences>page display>show transparency grid)is checked,the transparent background will be show

Question about creating a watermark in Photoshop Windows, but for use in iMovie 11 16:9 aspect ratio

I am looking to get this logo (the whole thing, not cut off on the top and bottom as is all I can currently manage to get working) to use as a semi-transparent watermark for a video I made to highlight the company the logo represents. Anyone have any ideas or might be able to edit it and send it back? No matter what I do the top and bottom are always cut off in iMovie 11. A link to the logo I need to use is here: http://en.wikipedia.org/wiki/File:AGC_Logo.png
Any help would be greatly appreciated. Please feel free to email me at [email protected] with any suggestions.
From all the research I did last night I found that iMovie 11 requires the watermarks themselves to be in either 4:3 or 16:9 aspect. I tried using GIMP on my wifes macbook to crop to these aspects but some part of the logo is always cut off, ie: the top and bottom or the left and right sides.
Thank you again in advance!

Thank you. I'll try it as soon as I get home from work. Unfortunately we
have a filter that blocks direct image links. However I forwarded this to
my personal email.
I tried stretching the canvas last night but no matter the size of the
canvas, GIMP still would only allow me to crop based off the size of the
logo itself. I could crop part of the canvas, as well as the logo, but I
could not crop a perfect square. When I did crop the square...(after two
hours of trying) iMovie 11 still viewed the logo as too large and cut off
the top and bottom of the circle.
Hopefully when I get home what you sent will work.
Jason
This message and any attachments are for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited.
- - - Huntington CAN-SPAM Opt-Out Auto-Disclosure - - -
If you prefer not to receive future e-mail offers for products or services from Huntington click or visit https://www.huntington.com/unsubscribe

Question about creating links

I'm working with a 3D PDF. I'm interested in having a link only appear/be active when I click on a button, is there a way to do this (possibly via java script)? I have a button that flys to a view which has a comment with arrow pointing to an object. I would like the comment box to be where the link is placed, I just don't want to have the link there all the time, only after the button is pressed. Any help would be great, thank you.

What are you using to work on that PDF file - Adobe Acrobat? If so, it would be better to ask in the Acrobat forum.

Very Nube Question About Creating a Very Basic Application Bundle / Package

I don't know anything about XCode or AppleScript, other than that they exist, so I'm coming at this with only conceptual knowledge of how applications on OS-X work. Nonetheless, I have a goal that I feel should be really easy to accomplish, I just don't know where to begin.
What I have is an html file with an embedded flash project that also references some outside files, such as pdfs for printing. This was designed to live on the web, but in reality it will be shipped out on a CD. Right now, if you insert the cd, you see the file contents (the above mentioned HTML file, as well as two folders containing the flash files and the pdfs that are embedded in or linked out from the html file).
This isn't very elegant, and doesn't accomplish the "app" feel I'm shooting for. What I'm wondering is: is there a way to create an application package that has the html file and content folders tucked inside of it, so that when a user clicks on the application package, the html file is automatically launched? What resources might you point me to in order to learn how to do this in a relatively short amount of time? (I'm not even positive if I'm using the correct terminology to search for solutions... is it an application package or an application bundle?)
Now for the limitations:
These files were generated on a Windows machine by an eLearning tool ("Articulate Presenter") and therefore really can't be fiddled with much. I can't open any of the flash files and change the directory paths for the resource files the main presentation needs. I'm fairly confident the presentation just refers to the folder the html file is in as its root, so if the file structure could stay relatively intact once all the files move inside this "bundle," I think everything will still work.
The Articulate Presenter folks aren't particularly helpful in solving Mac compatibility issues, so I thought I'd pose my question here. If I'm not being clear, I am happy to add additional details. Thanks very much for your patience with, and willingness to offer advice to, a complete newbie.
Cheers!

It's even easier than you think.
Open AppleScript Editor.
Type in the following code:
set htmlFile to (POSIX path of (path to me)) & "Contents/Resources/index.html"
set openCommand to "open " & quoted form of htmlFile
do shell script openCommand
Then do File > Save, and use 'Application' as the file format.
Then the "Bundle Contents" button on the toolbar will be enabled. Click it to open up the drawer.
Drag your HTML content and resources into the drawer.
Do File > Save again. Ta-da, you have your web-content packaged as an application.
This assumes that the top-level has a file named index.html. If not, modify to suit.

Question about creating libraries in Forte'

I'm looking into creating compiled libraries in Forte' to create a
"plug-and-play" interface among different implementation products. This
would allow us the ability to remove one library and upgrade it with
another assuming that the interfaces were the same. I'm using the
AddProjToLib to create a "super library" and am setting all of the
components as compiled. I am able to make the application distribution
with no problem. The problems that I am having are two-fold:
1) First auto-compile services cannot handle this "super project"
correctly. Don't get me wrong I HATE autocompile services but I decided to
give it a shot and see what happened. With that avenue gone, I went to
fcompile the individual libraries...these have to be done by supplier plan
order which is no big deal. The problem I ran into was that Forte' lower
cases all of the directory names, but the linker expected in some cases
that the directories would have some uppercase letters. The general rule
of thumb I found was that the directory name has to match the library name
generated. Forte' generated the library name with the proper letters
uppercase, but failed to do this to the directory structure. Obviously
this makes automating library creation a little more painful. This really
isn't a show stopper just a point I'd like to bring up in case and Forte'
people actually read these threads.
2) The major road block I ran into is the fact the Forte' statically
stores the full path of the libraries it is using during link/compilation
in the generated shared library. Forte's solution of just creating
symlinks (solution I found from their Technical Notes) is appalling at best
and does not support having multiple versions of libraries built from a
single installation running on the same machine (Unless you do simulated
environments to create a pseudo-new area...but I don't want to get into
that). Currently we are doing something extremely hoaky to solve this
problem with the few libraries that we have, but if we move to a more large
scale library solution this will not work.
I would love to hear any comments or suggestions about any of this. It is
sad that Forte' does not implement such a basic concept as SHLIB_PATH in
their shared libraries. By not doing this, it makes compiled libraries a
major hassle and potentially a waste of time.
Thanks for any comments that you might have in advance,
Scott Francis
Security First Technologies
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I'm looking into creating compiled libraries in Forte' to create a
"plug-and-play" interface among different implementation products. This
would allow us the ability to remove one library and upgrade it with
another assuming that the interfaces were the same. I'm using the
AddProjToLib to create a "super library" and am setting all of the
components as compiled. I am able to make the application distribution
with no problem. The problems that I am having are two-fold:
1) First auto-compile services cannot handle this "super project"
correctly. Don't get me wrong I HATE autocompile services but I decided to
give it a shot and see what happened. With that avenue gone, I went to
fcompile the individual libraries...these have to be done by supplier plan
order which is no big deal. The problem I ran into was that Forte' lower
cases all of the directory names, but the linker expected in some cases
that the directories would have some uppercase letters. The general rule
of thumb I found was that the directory name has to match the library name
generated. Forte' generated the library name with the proper letters
uppercase, but failed to do this to the directory structure. Obviously
this makes automating library creation a little more painful. This really
isn't a show stopper just a point I'd like to bring up in case and Forte'
people actually read these threads.
2) The major road block I ran into is the fact the Forte' statically
stores the full path of the libraries it is using during link/compilation
in the generated shared library. Forte's solution of just creating
symlinks (solution I found from their Technical Notes) is appalling at best
and does not support having multiple versions of libraries built from a
single installation running on the same machine (Unless you do simulated
environments to create a pseudo-new area...but I don't want to get into
that). Currently we are doing something extremely hoaky to solve this
problem with the few libraries that we have, but if we move to a more large
scale library solution this will not work.
I would love to hear any comments or suggestions about any of this. It is
sad that Forte' does not implement such a basic concept as SHLIB_PATH in
their shared libraries. By not doing this, it makes compiled libraries a
major hassle and potentially a waste of time.
Thanks for any comments that you might have in advance,
Scott Francis
Security First Technologies
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Questions about creating a foreign key on a large table

Hello @ll,
during a database update I lost a foreign key between two tables. The tables are called werteart and werteartarchiv_pt. Because of its size, werteartarchiv_pt is a partitioned table. The missing foreign key was a constraint on table werteartarchiv_pt referencing werteart.
Some statistics about the sizes of the mentioned tables:
werteart 22 MB
werteartarchiv_pt 223 GB
werteartarchiv_pt (Index) 243 GB
I tried to create the foreign key again, but it failed with the following error (Excuses for the german error message):
sqlplus ORA-00604: Fehler auf rekursiver SQL-Ebene 1
sqlplus ORA-01652: Temp-Segment kann nicht um 128 in Tablespace TEMPS00 erweitert
The statement I used:
alter table werteartarchiv_pt
add constraint werteartarchiv_pt_fk1
foreign key (schiene, werteartadresse, merkmale)
references werteart (schiene, werteartadresse, merkmale)
on delete cascade
initially deferred deferrable;
So the problem seems to be, that Oracle needs a lot of temporary tablespace to generate the foreign key and I do not know how much and why.
My questions now are, and hopefully someone is here, who can answer all or a part of it:
1) Why does Oracle need temporary tablespace to create the foreign key? The foreign key uses the same columns like the primary key.
2a) Is it possible to tweak the statement without using the temporary tablespace?
2b) If it is not possible to avoid the usage of the temporary tablespace, is there a formula how to calculate the needed temporary tablespace?
3) Is it possible to modify data in the tables while the foreign key is created or is the whole table locked during the process?
Any help or hint is appreciated.
Regards,
Bjoern

RollinHand wrote:
My questions now are, and hopefully someone is here, who can answer all or a part of it:
1) Why does Oracle need temporary tablespace to create the foreign key? The foreign key uses the same columns like the primary key.Because it's validating the data to ensure the foreign key won't be violated. If you had specified ENABLE NOVALIDATE when creating it then the existing data in the table wouldn't need to be checked and the statement should complete instantly (future data added would be checked by the constraint).
http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/general005.htm
Search for "Enable Novalidate Constraint State"

Question about creating association between Sharepoint BDC entities using Visual Studio 2010

I am following this tutorial:
http://blogs.msdn.com/b/vssharepointtoolsblog/archive/2010/08/02/walkthrough-of-creating-association-between-sharepoint-bdc-entities-using-visual-studio-2010.aspx
I am getting the following error:
There is an error in the TypeDescriptors of Parameters on Method with Name 'CustomerToOrder' on Entity (External Content Type) with Name 'Customer' in Namespace 'BdcAssociationSample.BdcModel1'. The TypeDescriptors incompletely define where the Foreign
Identifiers of Entity 'Order' in Namespace 'BdcAssociationSample.BdcModel1' are to be read. That Entity expects exactly '1' Identifiers, but only '0' TypeDescriptors with the correct Association were found from which to read them.
I have viewed the following:
http://lightningtools.com/business_connectivity_services/the-typedescriptors-incompletely-define-where-the-identifiers-of-entity-x-are-to-be-readbcs-error/
after reading that article, I am still not sure what setting I am missing. Does anyone have the full working source code from the msdn article linked above?

Hi,
According to your post, my understanding is that you got the symbols not loaded error.
First try rebuilding your project by right mouse click the project > Rebuild If that doesn't work, try a clean of the project (right mouse click on the project > clean)
If that didn't work check this:
Right mouse click your project
select [Properties]
select the [Build] tab
make sure [Define DEBUG constant] and [Define TRACE constant] are checked
Click the [Advanced] button at the bottom of the Build tabpage
Make sure that [Debug Info:] is set to [full]
Click [OK] and rebuild the project ;
Hope that works for you! (step 6 generates the .pdb files, these are the debugging symbols)
What’s more, you can clean & re-compile the code, then install the respective dlls one more time to GAC (just remove them before adding to GAC again), do an IISReset to check whether it works.
More reference:
http://stackoverflow.com/questions/2155930/fixing-the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-fo
http://stackoverflow.com/questions/2301216/the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-for-this-d
http://geekswithblogs.net/dbutscher/archive/2007/06/26/113472.aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Question about creating a link in a photoshop cs4 banner

Similar Messages

Maybe you are looking for