Question about crop

Hello. When i use my crop tool to extend my canvas a bit - I got new areas in white colour. Sadly, but I can't find a way to make all new areas to be black or other colours. Can you please advice me how to manage crop "default" colour?
Thank you for help.

Paolo means the background of the "Tools Palette", you can change it's backgroundcolor also without a picture opened.

Similar Messages

HT201670 Question about cropping in negative space on Aperture

I have a question about cropping on aperture. I would like to print a photo that is 6 x 10 inches. No photo company prints this size, so I was going to print 8 x 10 and physical cut out the extra space. Unfortunately my photo is already zoomed in and i can't figure out a way to crop and include negative space. Is there a way to do it on aperture. Should I use a different software program. And when i print to Wallgreens or shutterfly, they just strech or crop the image even further. Sould I be using a better printing company?
Thanks!

You can add blank areas to your image by printing the image to a new image:
Select the image in Aperture and use "File > Print".
Then set up a 10x8 paper size and disable the "Crop to fill" option.
Set the margins to zero inches.
Select to print to PDF.
In the "Print" dialog select to save the PDF as an image file (jpeg, tiff)
Or use an external editor to add borders to your image.

Probably a stupid question about cropping a video..

OK, so I shot an interview with a black background and once I went to edit it, I noticed a red object in the far right corner. Is there a way I can add black over this object or crop it out? I know this is a stupid question, but I'm new to video and editing in general so I thought it wouldn't hurt to ask.

There are several ways to accomplish what you want.
KGCW has talked about the Crop Effect.
Depending on exactly where the object is, and whether the camera was locked down, it might be possible to duplicate your Clip, place it above your initial Clip, then offset it a bit (Motion>Position), with the Fixed Effect>Motion>Position, and then apply the Garbage Matte to that offset duplicate, effectively Cropping out everything, but a small "patch" from the existing background. Note: if the edges of that Garbage Matte are too hard for you, you could create a soft-edged Track Matte, and use that to hold out the rest of the offset duplicate.
Another method, and depending on where, and how large the offending item is, would be to go to the Fixed Effect>Motion, and use Motion>Scale to increase the size of the Clip (do not do too much Scale, or quality will suffer). You might also need to do a bit of Motion>Position, to get that red object behind the Video's Frame Size. This will effectively Crop the object.
Good luck,
Hunt

Question about cropping multiple tracks at the same time

Ok, here is the situation. My band jams reguarly, and I am recording 8 tracks concurrently.... each instrument gets their own mic/input.... typical band fare.
The recording will last a solid 45-60 minutes before we break. In the meantime, there is plenty of downtime, and multiple songs.
After the jam, I like to cut out the crap, bad takes, etc....
I do this by editing the waveform of each track individually, selecting the 'good region'.... copying the section ... and pasting into a new track... I repeat this 8 times... once for each track....
I then mute the original 8 tracks, move all the clips to timecode 0 and export to disk....
Needless to say, this is very, very time consuming, and I would like some input about a better way to do this.
Is it possible to select the same region across multiple tracks and copy/paste them into several new tracks? Or is it possible to define the 'playable region' of a larger region so that when I export, I am only exporting the region I am interested in?
Ultimately, I want to produce an exported .m4a for each 'good take' which is nothing more than a subset of the larger 60 minute take....

Have you tried selecting all tracks, then split at the beginning and ending of the "good take" then copy and paste it into a new GB file?

Few questions about cs6

Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheers

mantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel

Several Questions about Aperture Problems

Having used Aperture for some time, and being a Mac user since 1985, I have a list of questions about Aperture that I need help with.
1. Periodically operating the sliders will make an image turn black. Sometimes this is early in a session, sometimes late. Various workarounds will bring the image back, but once this starts, quitting seems the only option. Can anyone help me with why this happens and how to stop it?
2. About 20% of the RAW files from my supported camera display the Unsupported Image Format error screen. These files operate perfectly in the manufacturers software and in other image management software that does not use the OS RAW libraries. Can someone help me with the cause of this and the solution (not a "workaround" but a way to make it stop happening).
3. ALL of my RAW files from my supported camera, when I try to lift metadata, return the error message that there is no metadata to lift. But in fact, the metadata inspector displays metadata. How can I stop this from happening and experience normal metadata lifting?
4. When I use the DNG format from my supported camera, a great many EXIF fields do not display, such as lens data. Can someone help me with DNG files, since these never generate the UIF error screen (cf. #2 above) as the manufacturer's RAW files do. I'm forced to use DNGs to have all my shots, but the EXIF data is not fully displayed.
5. Today I opened Aperture and no previews would display. Aperture froze while updating thumbnails. I'd not done any non-routine edits or imported any unusual files or formats. Aperture then would not quit. Is it safe to attempt to restart Aperture?
6. At times Aperture slows to the point of not working at all. Long pauses simply in trying to enlarge the selection circles for redeye removal, for example. What would cause Aperture to slow down without warning at any point in the workflow? How can I experience a more consistent operating speed from Aperture.
7. How do other image management programs like Lightroom compare on these points? Is Aperture typical or should I seek a change in my workflow, improvement in my hardware, or some adjustment in my installation?
Info: MacBook Pro, 4 GB RAM (apple), 320 GB drive, 45 GB free on drive; library of 3800 images. Fewer than 12 projects.
Thanks for your assistance.

n #3. It looks like you're absolutely right on this. I went back and checked on photos I'd edited and there was the altered metadata. +Many thanks for dispelling that concern!+ I love being a happy camper. Check that one off the list!
On 1, I've followed the black-screen issues and pretty much all we know is that a workaround exists--usually selecting the crop box restores the picture, but a lot of times it blacks out again. Having used Apple products over 25 years, all of which was in my adult professional life, I haven't seen Apple willing to just let users tolerate an irritating "workaround." I think this is something that needs fixing.
On 6--I don't understand how the rotational speed would produce erratic performance issues. I can go a month of reasonable performance, and then suddenly things bog down. Also, if that is the reason, this really ought to be part of the System Requirements, or at least, a recommendation. Maybe it is already--I should check to be sure. I confess this is one aspect I had not thought about.
Thanks so much for thinking about these. I love my Apple products and have owned almost every generation of Mac since the "Fat Mac" (512K RAM! 800Kb Floppies!) and hate to stare at the screen and think I've been given a truly poor product--not in my DNA--but these things break my heart.
Message was edited by: LawsonStone
Message was edited by: LawsonStone

Question about size adjuster

I have a question about the size adjuster located at the bottom right of iPhoto (the one that says "view at largest/smallest photo size" if you hover your mouse arrow over the two blue buttons). Is there a way to permanently adjust the photo once it's been resized by use of this option? I currently just highlight the entire photo and crop it, but it seems like there should be a magic button that changes the photo to the resized appearance. Does this make sense? Thanks

You would have to do the sliding in the Edit window and when you've got it where you want select the entire window with the cursor and click on the crop button. That will crop that portion of the photo into a separate file. It can, depending on how small that area is in relation to the original image, end up as a very small image file that would not be suitable for high resolution printing. That's because you'll be cutting out only those pixels that make up that portion of the image. Printed to the same relative size as it was in the original file it will print up OK. But if you want to print it as a 4x6 or whatever, it probably will appear pixelated.

A question about Accordion in Muse on positioning

A question about Accordion in Muse - e.g. I put an Accordion a web page with an anchor position and use a menu button to point to the location. However, when I resize the browser such that it is narrower than before, the Accordion actually moves towards the left side when I use the menu button to go to the Accordion. I don't want this, in fact, I would like the Accordion maintains a certain distance from the left of the browser's edge, instead of from the right. Could you please help?
Perhaps I am not decsribAn example is from the Site of the day: http://corlessmason.com/#portfolio, when I resize the browser narrower, the panel of pictures maintains its position and it's only being cropped off, instead of being pushed towards the left - that's pretty much I would like to achieve.
Thank you.

actually I found the solution:
Muse Vertical Website Shift
it works perfectly now!

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Question about crop

Similar Messages

Maybe you are looking for