Question about Custom Shape Files from newbie to PS

My husband bought me PS CS4 Extended. That said, I have never used PS at all. I have always used PSP. Please don't hate me!
I have figured out that one loads actions and presets. OK, got that. The question I have is if I can have my Custom Shapes and Actions on a completely different partition? I ask this because there is not enough room on the partition for me to continue adding shapes and such to PS in the program itself. I am figuring that I can since I have tio load them into the program anyway, but am asking to be sure so that I don't screw anything up.
Another question I have is if I am able to point PS to where all of my plugins are that I already have installed in PSP, which also happen to be on a different partition. In PSP all one has to do is to point the program to where they are and all is good and they can be used within said program. Does PS allow for this also? If not, do I have to re-install all of the plugins into the PS program itself? I just don't have that much room on the partition that my PS resides on because of all of the other pregrams that I have. Also, does everything I load into PS just stay loaded or do I have to reload each time I want to use that particular preset?
I do hope that ya'll can understand my questions and thank you for any help in advance.

the benefit of having the presets in the proper folders is that you can select them from the fly-out menus instead of having to search for them using the Load command so yes, you can have them wherever you want. I doubt though that you don't have enough disk space for them, for instance, all the actions that come with Photoshop take up about 200kb, the custom shapes are about 700kb but that's because they come in duplicates. And yes, all that you load up stays in Photoshop until you remove them, no need to reload them at program start. For plug-ins you have the option to set an additional plug-in folder by going to Edit->Preferences->Plug-ins, don't know about needing to install them though as i don't use any

Similar Messages

Please help..question about sending pdf file from my ipad to another

I have a pdf file in Kindle that shows up under documents. I am wanting to locate it and send it from my ipad to another..whether through email or even share through kindle. I contacted kindle and they said I have to contact apple with instructions to retreiving the pdf before I can send it. Anyone know how to do it. It shows up in docs on my kindle app but doesnt show up in itunes or on amazon. Help appreciated!!!!

I copied this from another discussion - that ironically enough - James and I both participated in. The OP never responded to what I suggested, but I think that this may work.
I think that the Kindle app uses file sharing so see if you can transfer the files to the computer via iTunes with file sharing.
iOS: About File Sharing
Then drag the pdf file from the file sharing window (or use the save to button) onto your desktop. Email it from there and you can even email it to yourself on the iPad and store it any other other PDF app that you may have.

HT2470 how would i go about taking multiple files from documents and make them part of 1 master file

how would i go about taking multiple files from documents and make them into 1 master file? I want to put all documents associated with this project together for easier access.

From the finder window, click File, click new folder, you can drag all documents into that Folder making it the master folder. You can ajso drag folders into the Master folder, and have them as sub-folders if you wish to do that. Either way they will all be in one master folder.

Basic question about importing wma files

Hi, I have a basic question about importing wma files. I ripped some cd's on a Mindows computer using Media Player, but now want to copy them to my Mac and use them in iTunes on my Mac. when I use Import in iTunes, nothing happens and I cant even seem to copy them one by one using the Music folder.
Can someone help me?
thanks
eMac Mac OS X (10.4.4)

iTunes for Mac doesn't support .wma files.
If you can use a PC to convert them, you can use one of many freeware applications. Google for 'wma to mp3'.
For the Mac there's the shareware program EasyWMA that can convert them.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Some questions about importing HTML files

Hi, folks
Let's suppose we want to import a pack of HTML files formatted in HTML5 wit's it's CSS into a double-oriented folio. A couple or three questions about that, please:
1. Is there a limit for a reasonable quantity of HTML files I can import into a folio? I mean.. 100 would be way too much, for instance?
2. These HTML files could be navigated and referenced from inside TOC-pages made in InDesign,right? (navto://..., I gues?)
2. Will it be possible, by means of HTML adaptative design techniques, to treat both orientations (vertical and horizontal) as different viewports or screen sizes so that the design adapts for instance the column width with its CSS?
3. That said, will the InDesign final app. respect that adaptative CSS rules?
I am asking this because we are looking for a way to inject big quantities of content with a very similar design into our application in a really fast and automatizable way and I have the suspicion* that importing HTML5 preformated CSS files could be the a very good and simple alternative to importing XML into InDesign templates as we start out content as tagged almost-html files.
Thanks a lot
Gustavo Sánchez (Posting from Madrid)

I assume you are asking about using HTML articles.
1. There is no limit beyond simply keeping things reasonable.
2. Yes. Just use navto://articlename
3. Yes. I've used min-width of 768 and max width of 1024 to control it.
4. InDesign does not enter into any of this with the exception of using the folio builder panel. Everything else is done in Dreamweaver or whatever program you decide to use for the article.
If you want to restrict the HTML articles to one orientation or the other, use the _h and _v suffixes.
Bob

OSD: different pxe, question about different wim-files

Hi,
Please see this question, I'm somewhat confused about the different
wim files.
I can see the default winpe.wim and a different wim next to it which has name winpe then environment then number (winpe.sccm0022.wim), what is this file.
And, like in my post, why can't I use this image to import into a pxe and boot from that?
Please advise.
J.
Jan Hoedt

Hi,
What is your goal with this? boot to SCCM and do OS deployment or what is your purpose? when dowloading the boot .wim file from a DP parameters are passed along like MP and so on. So you cannot use that .WIM file and pxe-boot from another PXE solution and
do OSD from ConfigMgr.
That is why Johan's unsupported solution would be the way to try it.
http://www.deployvista.com/Blog/JohanArwidmark/tabid/78/EntryID/54/language/en-US/Default.aspx
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Few Questions About Backing Up Files

Okay, I'm pretty new to this, and have checked the support pages, but I do have some questions about backing up my files.
I'm running out of room on my computer's hard drive, and am wondering if burning the library to CDs will allow me to quickly restore my library on my computer when I sync my iPod.
I know that when an iPod syncs with a comp, it will lose any songs that aren't on the library list. (If I deleted some songs to free up room, I'd lose those songs on my iPod when I synced it up.) Is there a way to prevent that from happening? Some way to save a headache continuously restoring my iPod's library every time I want to add a new song or recharge it?
I'm on Windows XP, if that matters.

Best and easiest solution is to buy an external hard drive. Then simply drag and drop your iTunes folder from your internal onto the external and copy the entire library.
Patrick

A question about updating metadata files in plug in

Hello
I 'm trying to monitor my stand alone java app.
I read the chaper Target Types and Default Collections ( my app exposes jmx beans)
all seems to work ok ( i mean the part wherre it says ..
emctl register oms metadata -service targetType -file full
path/TargetTypeMetadata.xml -pluginId Plugin Id -sysman_pwd sysman
emctl register oms metadata -service storeTargetType -file full
path/TargetTypeMetadata.xml -pluginId Plugin Id -sysman_pwd sysman
emctl register oms metadata-service default_collection -file full
path/TargetTypeCollection.xml -pluginId Plugin Id -sysman_pwd sysman
but , the next line is not clear to me:
emctl register oms metadata-service systemStencil -file full
path/TargetTypeStencil.xml -pluginId Plugin Id -sysman_pwd sysman
My question is: what is TargetTypeStencil.xml file? where can i found it?
Do I realy need it?
and after restart the agent as it says , could i see my beans ? ( i used emcli jmccli tool and created the metadata / default_collection files) ?
Thanks.

So, I folowed the instructions in chapter 13.7.1 ( ProgrammersReference) - EM 12C release 2.
I created my own mbeans , used the emctl jmxcli etc ..
I created both files : for metadata, and default_collection ( The files which the emctli genertaed for me )
I did it on the agent machine. I copy the files under the PLUGIN dir in the agent machine too.
I registered the files using mrs service as it's written ( chapter 16 ) . ( after I copy the files from the agent to the mrs ( oms machine ) machine .
Every thing seems to be OK . I restarted the agent.
Now, when I open the EM console' I can't see the metrics which i defined in the generated files !
Am i missing something??
Please Help!

Question about replacing corrupted file in windows 7

hi,
I read in windows 7 bible that if a system file is corrupted , I can replace it with system recovery tool (at command prompt) if I have onother computer with windows 7 installed.
my question is here , if I replace any file with copy the file from computer to dvd and replac it on my computer , does the windows version must be the same for 64 bit or it doesn't a matter.
thanks
johan
h.david

Hi,
Yes, the version must be the same. You may be able to get a known good copy of the system file from another computer that is
running the same version of Windows with your computer. For different versions there may be different configuration settings in the files that you operating on which if replaced with the wrong version might cause new issues.
More information regarding How to manually replace a corrupted system file with a known good copy of the file, please check it in the link:Use
the System File Checker tool to repair missing or corrupted system files
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Custom RSS file from XMP metadata

I am attempting to create a custom RSS file (.mrss) that references XMP metadata from Premiere. The CDN that we use references that RSS file in order to publish all of our uploaded assets correctly, and if I could automate that process it would save me a lot of time. Any ideas?

m41miller42 wrote:
I am attempting to create a custom RSS file (.mrss) that references XMP metadata from Premiere.
I was basing the move on this statement. This was posted in the Adobe Connect forums.

Question about calling batch file by using the System Exec+.vi?

Hi
I have a problem about calling batch file. I know that the system exec is equivalent to "run" in Windows. I called the batch file c:\rtxdos\bs\ch0.bat successfully in the "run" but it didn't work in the LabVIEW program. The dos prompt had an error message "Bad command or file name" and it just happen when I call this batch file in LabVIEW. Why?
Bill.

Hi,
Try to set the "working directory" parameter of System exec.vi to the directory where the batch file is located. It may help.
Good luck.
Oleg Chutko.

Question about Custom Escalation Function

I want to use a Custom Escalation Function described on this document:
http://docs.tpu.ru/docs/oracle/en/owl/E14571_01/integration.1111/e10224/bp_workflow.htm#BACHEFDH
I want to execute a custom function on task EXPIRATION.
Main Question: The "Custom Escalation Function" is just for Escalation or i can use too for EXPIRATION ?
Thanks.
Victor Jabur

Okay Experts. The problem is solved. There was no problem with the custom key figure function. The problem was with the sales order data. The sales order details for the material in question were under the "make to order" segment and the other transaction data info was in the "make to stock" segment.
Once i found this out , i tried loading someother material and it worked perfectly.
Thanks
Aparna

(newbie) Question about replacing .class files and web.xml file

I'm new to servlets and I have two quick questions...
Do I absolutely need a web.xml file to define all my servlets, or can I simply place .class files into the WEB-INF directory and expect them to run?
If my application server (for example Tomcat) is running and I replace a servlet .class file, do I need to restart the server for the new .class file to take effect?
...or are both of these questions specific to the application server I'm using?

Hi,
From an article I read:
With Tomcat 3.x, by default servlet container was set up to allow invoking a servet through a common mapping under the /servlet/ directory.
A servlet could be accessed by simply using an url like this one:
http://[domain]:[port]/[context]/servlet/[servlet full qualified name].
The mapping was set inside the web application descriptor (web.xml), located under $TOMCAT_HOME/conf.
With Tomcat 4.x the Jakarta developers have decided to stop allowing this by default. The <servlet-mapping> tag that sets this mapping up, has been commented inside the default web application descriptor (web.xml), located under $CATALINA_HOME/conf:


A developer can simply map all the servlet inside the web application descriptor of its own web application (that is highly suggested), or simply uncomment that mapping (that is highly discouraged).
It is important to notice that the /servlet/ isn't part of Servlet 2.3 specifications so there are no guarantee that the container will support that. So, if the developer decides to uncomment that mapping, the application will loose portabiliy.
And declangallagher, I will use caution in future :-)

Question about insert date value from xml file

I want insert value into table from xml file. Every time I inserted value of date type into the table, I got the unpasable error message as following:
oracle.xml.sql.OracleXMLSQLException: Exception 'java.text.ParseException:Unpars
eable date: "2000-04-19 00:00:00.0"' encountered during processing ROW element
Thanks for anyone that can fix my problem or give me any suggestion.
email: [email protected]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by matmnwx:
I want insert value into table from xml file. Every time I inserted value of date type into the table, I got the unpasable error message as following:
oracle.xml.sql.OracleXMLSQLException: Exception 'java.text.ParseException:Unpars
eable date: "2000-04-19 00:00:00.0"' encountered during processing ROW element
Thanks for anyone that can fix my problem or give me any suggestion.
email: [email protected]<HR></BLOCKQUOTE>
Use:
OracleXMLSave sav = new OracleXMLSave(conn,tabName);
sav.setDateFormat(<hier the date format in the XML-File>);

Few questions about customizing jwm

Hello all,
Coming from KDE, I found jwm and it runs so much better on this circa 2008 laptop. KDE runs OK but this is a lot faster. I have familiarized myself with .jwmrc and how to make basic changes and I've come across a few questions.
1.) Is there any way to enable dragging and rearranging the open programs in the taskbar? I'm kind of OCD about the order of my running apps especially since restarting jwm after edits to the config file puts them in a random order.
2.) I think I see a way to get programs to start maximized and such using Groups but is there a way to start a program with a specific size? Specifically I am referring to nedit - it always starts too small and I size it so be larger but not overlapping my conky.
3.) Relating to #2, is there any way to get all programs to remember their window's size and position upon restarting? This has been a pet peeve of mine for years and KDE has the ability to remember this but most other Linux DEs and WMs don't.
4.) I've been using slock to lock the screen but I need to run it manually. Is there any way to get slock to run automatically, ie after say 5 minutes of inactivity? As of now I've been using xscreensaver to power off the monitor - should I just use the "Lock screen" option here? I've been trying to keep this install as minimal as possible - I don't need a screensaver, just ideally to turn off the monitor and lock the screen after some time.

1) I don't think you can - you can however disable the jwm taskbar and use xfce4-panel or similar.
2/3) Devilspie
4) xautolock

Question about Custom Shape Files from newbie to PS

Similar Messages

Maybe you are looking for