Question about DBMS_PREDICTIVE_ANALYTICS and non-linear data

Hi,
I am executing DBMS_PREDICTIVE_ANALYTICS against some data, but it's not giving me good predictions for my null data. Should I be using different data mining techniques ?
The data has the following fields 1) Position, 2) Odds, 3) Selection & 4) Event.
Position and Odds and linear, since the smaller the number the higher the likelihood of winning, but Selection is a lookup based on a Name, so therefore non-linear, but can be used to look at previous form in the same data set. Event is a way to group Selection's into an Event.
What's the best way to tackle this ?

Sorry for delay, been on vacation.
I'm trying to improve odds for predicting winners, given the form, odds, previous history, and form of other runners in the race.
Take a look at data.betfair.com for a list of data elements available to me.
I'm currently using the data where the latest_taken column has the highest value. i.e. the odds and ranking just before the race starts.

Similar Messages

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

Retrieving spatial and non spatial data in one query

Hello. I am having slight difficulties using JDBC to retrieve both spatial and non spatial data in the same query. The following is code from a sample program of mine that retrives spatial data from spatial tables.
(In spatialquery geom is a geometry column and city is simply the name of the city):
try
Geometry geom = null;
String database = "jdbc:oracle:thin:@" + m_host + ":" + m_port + ":" + m_sid;
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = (OracleConnection)DriverManager.getConnection(database, sUsername, sPassword);
GeometryAdapter sdoAdapter =
OraSpatialManager.getGeometryAdapter("SDO", "8.1.7", STRUCT.class, null, null, con);
String spatialquery = "SELECT a1.geom, a1.city \n" +
"FROM cities a1";
Statement stmt = con.createStatement();
OracleResultSet rs = (OracleResultSet) stmt.executeQuery(spatialquery);
int i = 0;
int noOfFeatures = 2;
while (rs.next())
for(i = 1; i <= noOfFeatures; i++)
STRUCT dbObject = (STRUCT)rs.getObject(i);
try
geom = sdoAdapter.importGeometry(dbObject);
catch(GeometryInputTypeNotSupportedException e)
System.out.println("Input Type not supported");
catch(InvalidGeometryException e)
System.out.println("Invalid geometry");
System.out.println(geom);
}//end while loop
This retrieves the sptial data fine, however when I attempt to retreive the non-spatial data I keep getting a "ClassCastException" error. I understand it is something to do with "STRUCT dbObject = (STRUCT)rs.getObject(i);" line. Can anyone tell me how to retrieve both spatial and non-spatial data in the one query using JDBC. I have tried nearly everything at this stage. Cheers joe

Theresa A Radke
Posts: 20
OTN Member Since: Jul, 2001
retrieving spatial and non spatial in same query. May 23, 2003 12:02 AM
retrieving spatial and non spatial in same query.

SAP and Non-SAP data to Xcelsius

Hi Experts,
I m new to Xcelsius and i a m currently working on Xcelsius project, i need help on approach to bring both SAP and Non-SAP data to Xcelsius. Here the scenario goes on....
Total 6 plants are there, out of 6, 4 plants are on SAP and other 2 plants are on Non-SAP (Excel)
The requirement is to develop a dashboard to see all the plants details (both SAP and Non-SAP)
The approach i suggested for SAP: ECC --> BW --> InfoProvider --> Query --> QaaWS --> Xcelsius
For non-sap, data is available in excel, so we can bring that data directly to xcelsius, but problem is how to make it dynamaic because data in excel changes daily.
So my doubt is, if i develop a universe on excel files, then how to combine both SAP and Non-SAP universes. Is Data Federator is required for this or is there any approach to bring both SAP and Non-SAP data to Xcelsius.
Can any one help me on this
Thanks & Regards
Ramakrishna Kamurthy

hi
Another approach which i have used in the past is to have data in XML format, placed on a web server. When my data changes daily, i just export my data from excel or whatever source into the XML format..
Use the XML data connector to bring into xcelsius.
thanks.. hope this helps
regards
Jeff.

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Three questions about Java and Ftp

Hello, i've the following questions about Java and Ftp:
1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");
2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
Thanks in advanced!!!
Kike

1- .netrc file is in $HOME directory but i can't
access to this directory from java code. The
following line producesan Exception (directory
doesn't exists)
FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
think you can use it as part of a legal path.
Instead, use System.getProperty("user.home");
Ok, thanks
2- .netrc file must have the followingpermissions:
-rw- --- --- but when i create the .netrc file the
following permissions are on default: -rw- r--r--,
how can i change this permissions? (In java code,i
can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
I need to use estrictly the .netrc with -rw- --- --- permissions
Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
3- Are there any way to pass parameters to a.netrc
file? If i get to do this i needn't change the
permissions because i can't modify orcreate/destroy
this file.I don't think so. Why do you need the .netrc file in
Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
- modify .netrc (for me is the complex option)
- destroy and create a new .netrc (is easier but i have permissions problem)
- use .netrc with parameters but i haven't found any help about it
Thanks for your prompt reply!!!!
Kike

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Question about RAC and ASM

Hi,
We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
I'm a newbie to RAC and ASM..
Thanks,

user4866039 wrote:
1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
Bjoern

A question about UDA and Data-Forms

Hi all,
I have a couple of questions about UDA. I am using Hyperion Planning 11.1.1.3m, and when I desing a Data-Form I would need to use the UDA I asigned for the Entity dimension: is that posiible?
The other question is, when creating a Substiution Variable in Essbase I use the function @UDA (+dimension+, "MemberA"), but when using this variable in the Data-Form, it does nothing at all(in fact, it is been detected as an error). Why is that happening?
Thanks a lot

Use an attribute dimension to achieve what you are trying to do with UDA's in a data form. An attribute dimension will allow you to filter on members in the base dimension by a specific attribute the same way a UDA will. You can create the attribute dimension in the dimension editor in Planning by selecting the base dimension (Entity) and then select the custom attributes' button. Check the dba guide for a step-by-step approach.
With regards to the subvar, are you trying to add the function as a value of the subvar when you create it in EAS? If so, this is not allowed. What are you trying to do with the subvar on the form? Subvars are supported in data forms as part of the member selection for a dimension. For instance, you can set up a subvar called CurYear and set the value equal to FY11 for the Fiscal Year dimension. In the data form you can set the member selection for the Fiscal Year dimension to CurYear. When the user opens the form, the member FY11 is returned.

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

New to Arch(64), with a few questions about Xorg and more

Hello and Happy New Year everyone,
I'm a user that has just recently decided to try and switch to Linux as the main OS for all things that don't concern gaming. I've been using the "server side" of Linux at work for a couple years now, but when it comes to its desktop part I consider myself not fully competent yet. Under recommendation of a friend I decided to give Arch a shot, and I can say that it really suits my philosophy on how an OS should be like.
I have a few issues I'm currently struggling with that I couldn't seem to solve by looking on my own: as they are mostly minor and shortly described, I thought about packing them up in one single thread to avoid making too many. I've used i686 as testing grounds and am now using x86_64, but most of my problems apply to both.
Here's my hardware, for reference:
- Intel E8400 CPU (3GHz, dual core)
- Asus P5Q-E motherboard
- 2 GB DDR2 800 RAM.
- nVidia 8800GT video card with 512MB memory
- Samsung SyncMaster 713BM flat panel, connected via DVI cable
- Creative SBLive! 5.1 OEM card (dug up for the occasion since it has hardware mixing)
I'm using the latest Xorg from the repos, nvidia proprietary drivers, ALSA, Xfce4 + compiz-fusion, and SLIM as my login manager.
And here are my headaches:
- (32/64) A similar issue to the one I just mentioned: compiz-fusion doesn't seem to stick around as my window manager, even though I manually set it as per Method 2 from this wiki page. Although it did work for a while, after some time (perhaps after installing some package? but I didn't really install anything X related) it simply stopped working. To get my windows, I have to manually run fusion-icon after login.
- (32/64) I'm using MPlayer with libass to watch my favourite anime, but sometimes MPlayer freezes up, forcing me to xkill it. Disabling ASS embedded subs yields error message 11, something about unsufficient resources. Disabling subs entirely prevents MPlayer from crashing. Oh, the errors only happen on specific points of certain videos, and all the videos work just fine under WinXP with MPC or VLC.
- (32/64) Why do anti-aliased fonts under Linux still look so bad, even though I installed the appropriate packages suggested in the wiki? I don't mind disabling anti-aliasing entirely and just using Verdana, but is there some trick to it besides setting sub-pixel hinting under rclick->settings->user interface?
- (32/64) My SBLive might be 5.1, but I'm only using the front connector as I use either two stereo speakers or headphones all the time. But the volume setting in applications (such as MPlayer) seems to affect the PCM meter of ALSA's mixer, putting it over 0 dB gain and generating sound distortion.
- (64/don't know if 32 too) Why does Compiz's framerate drop so badly when I push alt-tab? I'm using the default application shifter, hardware acceleration, and there should be no reason why the framerate should drop like that (expecially considering that wobbly windows or cube rotating don't affect my performance at all). I've read around the net about very similar occourances with the task switcher, but I've found no real solution.
- [SOLVED] (32/64) The first obstacle I came across was that I couldn't set my screen refresh any higher than 60Hz when I actually wanted 75Hz: I solved this by setting the vertical refresh to 76.0-76.0 in xorg.conf. However, for some reason this setting doesn't stick on reboot: I have to log in and manually run rclick->System->NVIDIA X Server Settings for it to apply.
- [SOLVED] (64 only) The 32 version of Xorg was fine, but for some reason I'm not getting the correct keyset (Italian) under X, while everything works in vc. I think I read something about disabling a module called "keydev", but is this really the way to go?
- [SOLVED] (64 only) Although I can hear sound in just about every application, the 64 bit version of Pidgin doesn't "ring" on received messages even though the associated option is enabled.
I kindly thank you in advance for your assistance: I will provide any configuration files that might be needed to help me out
Last edited by Akaraxle (2009-01-03 21:25:43)

xisal wrote:
Take a look into /etc/hal/fdi/policy/10-keymap.fdi. This works with portuguese layout:
<snip>
The file did not exist, so I created it and changed "pt" to "it". Thanks a bunch, that fixed it!
Try SMPlayer.
Ah, I'd rather not involve Qt. Besides, isn't SMPlayer simply a frontend to Mplayer (who already has GMplayer integrated into it, IIRC)?
Mikko777 wrote:
Why would you want to use 75Hz with lcd display?
Does it make a difference?
On my monitor, from my point of view, it appears to make a difference. It's that simple
azleifel wrote:In gmplayer Preferences -> Audio -> (assuming alsa selected) -> Configure driver and change the mixer channel to something other than PCM, e.g. Master.
For all the three combos, I have "driver default" selected. The other option is "default"; I tried to manually type "Master" into the mixer channel field, but then gmplayer's windows and my Xfce taskbar started blinking, so I knew I had just "crossed streams".
Regarding NVIDIA X Server Settings, running "usr/bin/nvidia-settings --load-config-only" at login is the only way to apply the settings "automatically".
I've slapped that on my ~/.xinitrc before "exec startxfce4". Thanks in advance, going to test it now!
About the refresh and non-decorated windows issues (which *appears* to be solved after I've wiped the xfce-session cache), I've been thinking: could they somehow be related the login manager I've chosen, SLIM?
P.S. New question: is there any way to enable the ALT+num126 for ~ keyboard behaviour I'm used to under M$ environments?
Last edited by Akaraxle (2009-01-03 09:43:02)

Follow-up question about forms and SharePoint Online

I asked a question about life after InfoPath earlier, and got a good answer:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
pages and workflow.
Neither of those are available in SharePoint Online, so what would you do?

Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
is hosted by another server.
By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out. XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
Mike G.

Question about DBMS_PREDICTIVE_ANALYTICS and non-linear data

Similar Messages

Maybe you are looking for