Question about different behaviour from Jinitator and JRE

Hi,
In the formsweb.cfg, if I set to to use JRE, it works fine.
However, if I change to use Jinitator, it shows the following error in the browser.
error:java.lang.VerifyError :(class:Try1/TryHint$1, method: <init> signature :(LTry1/TryHint;)V) Expecting to......
The sample it works
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
After setting the below, it shows the above error.
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljini.htm
Anyone can help ?
Thanks.
Ivan

Every config uses the Java Runtime Environment (JRE) -- the difference is which JRE. JInitiator ships with a v1.3 JRE, and the Java Plug-In (JPI) uses whichever JRE corresponds to the given JPI version.
You have given no information regarding which browser/version you are running, and it appears that you have not pasted the entire stacktrace, so it will be very difficult for anyone to help you. Reposting provides no additional information.
Please review the following information -- it will hopefully help you sort things out:
   http://fdegrelle.over-blog.com/article-4135746.html
Eric Adamson
Lansing, Michigan

Similar Messages

  • Question about tranferring data from iPhone 3gs to iPhone 4

    I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
    First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
    Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
    Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
    ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
    MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
    Thank you in advance, sorry for the long post.

    If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
    Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
    iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
    I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

  • Question about receiving mesage from those not on ...

    I have a question about recieving message from those who are not on my contacts
    I enable anyone to contact me through IM and call. a  friend who I did not yet add as a friend (not in contact)call me by mistake.  he sent message of apology to me, say "sorry for mistakeing call,"
    but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
    i try to send him mesage to test. He also did not see my mesage show up  ,, on his screen it only show that he call by mistake and that he sent mesage ((which,  i never recieve).
    i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
    does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
    thx for info.....

    I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

  • Here's a very basic question about 2 TB external drives and Time Machine.

    Here's a very basic question about 2 TB external drives and Time Machine.
    Ihave a Mac Pro with a .75 TB and 1 TB drive.  It also has a 1 TB 2ndinternal drive.  My current external drive is too small so I'll begetting a 1.5 TB or 2 TB drive.
    Obviouslythe new larger 2 TB drive will backup everything on the Mac Prointernal drive with Time Machine.  But there will be 1 TB of space leftover going to waste.
    ShouldI partition the external drive so that the TM portion will be 1 TB andthe use the remaining extra partition for additional file backups withCarbon Copy?
    Thanks for any insights.
    I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

    The problem with terabyte drives is that that a 3 TB is about as big as you can get without going into RAID territory. Ideally, a Time Machine drive should be 3 times as large as all the drives you are backing up. So, if you have 2.75 TB of internal storage, you should have 8 TB of Time Machine space.
    Of course, that is "should". If your TB drives are mostly empty, then you can get away with something 3 times the size of your used disk space. Just remember that you are pushing it. Linc is right about Time Machine needing space to work.
    It is unlikely that you have regular churn on 2.75 TB of disk. I suggest identifying which drives and folders have the most activity and excluding those drives and directories that don't change much. It would be better to archive the data that doesn't change often and keep it out of Time Machine. Then you may be able to get away with a 2 TB Time Machine drive.

  • Question about 2 TB external drives and Time Machine.

    Here's a very basic question about 2 TB external drives and Time Machine.
    I have a Mac Pro with a .75 TB and 1 TB drive.  It also has a 1 TB 2nd internal drive.  My current external drive is too small so I'll be getting a 1.5 TB or 2 TB drive.
    Obviously the new larger 2 TB drive will backup everything on the Mac Pro internal drive with Time Machine.  But there will be 1 TB of space left over going to waste.
    Should I partition the external drive so that the TM portion will be 1 TB and the use the remaining extra partition for additional file backups with Carbon Copy?
    Thanks for any insights.
    I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

    John,
    I'm not sure why you posted in the iMac forum so I'm going to attempt to get you to the correct spot. I would recommend reposting in the Time Machine Forum, this is part of the OS X forums (Leopard or Snow Leopard) because you are using Snow Leopard (your profile indicates you are) please click Apple Support Communities and type Snow Leopard. Then you can narrow the search down by clicking Refine this List.
    Roger

  • Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center ??

    Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center or can i call the normal support for my country ???

    For liscensing of iOS related hardware? You'd need to contact the Made For iPod Program.
    <http://developer.apple.com/ipod/>
    Their contact address is <[email protected]>

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

  • Question about Removing Permissions from the System Folder with chmod

    Hi
    I have a question about the removal of permissions from the System folder (and sub directories and files).
    Background
    Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
    I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
    The Problem
    The issue that remains is a permissions check using Disk Utility keeps reporting
    ACL found but not expected on "System".
    followed by an extensive list of sub directories and all.
    Attempts to repair take hours and the same errors are reported.
    Found Solutions
    I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
    sudo chmod -R -N ./System/* ( to remove all ACLs)
    or
    sudo chmod -R -E ./System/* ( to replace all ACLs )
    My Question is ( to the UNIX gurus):
    What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
    Many thanks!!

    OK
    So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
    You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
    Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

  • Question about transferring files from a Mac

    Hi there!
    I want to ask about the new iPad mini (and or the iPad 3) especially with transferring files from a Mac.
    I normally just do the "normal" way of transferring files (.doc files, .mp3 files or .mp4 video files) i.e. via the USB port of my Mac. But is there a faster, easier and a wireless way to do it?
    Please advice.
    Thanks.

    onslaught wrote:
    I couldn't find Dropbox on the Mac App Store but i could find Dropcopy in there.
    Stupid question: will i need to also install Dropcopy on my iPad 3/iPad mini in order for my files to be transferred?
    Yes, it will need to,install it on any machine you wish to use it on.
    also, you should spend some time on the Drobbox website to see how it works. You won't find it in the Mac App Store, but can still easily using it on a Mac.

  • Questions about CIN tax procedure choice and pricing schemas

    Hi all,
    I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
    I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
    a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
         I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I  would  to understand better which are on behalf of one choice or another.
    b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport,  etc.).
    Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
    Thanks in advance
    Gianpaolo

    hi,
    this is to inform you that,
    a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
    a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
    CIN - TAXINN and TAXINJ
    b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
    write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
    b.b. you can create your own pricing procedure for this and go ahead.
    hope this clears your issue.
    balajia

  • Few questions about OWB migration 10g---- 11g and UIODs

    I am curretly migrating OWB repository from 10g to 11g.
    Both repositories are on the same database.
    We just have one single Project in our Repository. It is actually(preinstalled) MY_PROJECT renamed into something else. So it has the UOID of the "default" MY_PROJECT but of course, physical and business names are different.
    Because we renamed MY_PROJECT, complications occured when we first tried to do the repository upgrade the recommended way, with repository assistant. During the upgrade processes , the error came that the objects with same UOIDs but different names exist.
    Obviously, MY_PROJECT from the 10g repository collided with the new, preinstalled, MY_PROJECT in the (almost) empty 11g repository/workspace.
    Also, MY_PROJECT in 11g workspace has exactly the same UOID as the one created in 10g repository.
    I was told by Oracle support that this was a bug-but they do not see it as high priority, so we had to do workaround --the migration of the repository on 11g.
    Now my first Question: Was it completely insane to use MY_PROJECT for your actual ongoing Project? We never had any other problem with this constallation.I also noticed in forums that people indeed use MY_PROJECT for their work.
    The second question: Has anybody , ever, seen the same problem, when trying to upgrade to 11g ?
    The migration procedure is as follows:
    -install 11g Workspace with Repository Assistant
    -Export locations and data from 10g repository
    -Import locations and data in 11g repository- thé update option -matching on UOID..so we do not get problem with MY_PROJECT
    -register locations in11g repository
    -deploy all mappings and workflows
    Now, this all works fine..and our new 11g repository runs without problem..
    I am still puzzled by few things :
    New 11g repository is almost empty apart from MY_PROJECT and DEFAULT_CONFIGURATION. Now, MY_PROJECT in 11g has the same UOID as in oracle 10. But DAFAULT_CONFIGURATION in 11g has different UOID from DAFAULT_CONFIGURATION in 10g. It is always the same UIOD for every new 11g installation (I've upgraded repository on many databases).
    Now 3rd question: Is there any particular reason why DEFAULT_CONFIGURATION  has different UOID in 11g and MY_PROJECT hast the same UOID ? Is there any logic behind it -that I fail to grasp ?
    Another thing. I said that I am importing complete Project in the new repository with update option with matching on UIOD. I should get a problem with DAFAULT_CONFIGURATION, I thought, since it is in the full export of the Project and DEFAULT_CONFIGURATION has different UOID than in 11g repository.
    But I did not get the problem at all.Default Configuration was simply skipped during the import - visible from the import log.
    Therefore 4th question : Why didnät OWB try to import DEAFULT_CONFIG? Is it "internal" object and as such cant't be changed ?
    The reason I am so obsessed with UOIDs is that we have automated release procedure (between development, test and production repositores) which is based on comparing UOIDs.
    Therefore a s slight trace of concearn on my side, because the DEAFULT CONFIG now has different UOIDs than before. But on the other side, we just propagate mappings and workflows between repositories - I do not see why the default config should matter here .
    Thank very much in advance for any answers/suggestions/ideas and comments!
    Edited by: Reggy on 27.01.2012 07:12
    Edited by: Reggy on 27.01.2012 07:12

    I am curretly migrating OWB repository from 10g to 11g.
    Both repositories are on the same database.
    We just have one single Project in our Repository. It is actually(preinstalled) MY_PROJECT renamed into something else. So it has the UOID of the "default" MY_PROJECT but of course, physical and business names are different.
    Because we renamed MY_PROJECT, complications occured when we first tried to do the repository upgrade the recommended way, with repository assistant. During the upgrade processes , the error came that the objects with same UOIDs but different names exist.
    Obviously, MY_PROJECT from the 10g repository collided with the new, preinstalled, MY_PROJECT in the (almost) empty 11g repository/workspace.
    Also, MY_PROJECT in 11g workspace has exactly the same UOID as the one created in 10g repository.
    I was told by Oracle support that this was a bug-but they do not see it as high priority, so we had to do workaround --the migration of the repository on 11g.
    Now my first Question: Was it completely insane to use MY_PROJECT for your actual ongoing Project? We never had any other problem with this constallation.I also noticed in forums that people indeed use MY_PROJECT for their work.
    The second question: Has anybody , ever, seen the same problem, when trying to upgrade to 11g ?
    The migration procedure is as follows:
    -install 11g Workspace with Repository Assistant
    -Export locations and data from 10g repository
    -Import locations and data in 11g repository- thé update option -matching on UOID..so we do not get problem with MY_PROJECT
    -register locations in11g repository
    -deploy all mappings and workflows
    Now, this all works fine..and our new 11g repository runs without problem..
    I am still puzzled by few things :
    New 11g repository is almost empty apart from MY_PROJECT and DEFAULT_CONFIGURATION. Now, MY_PROJECT in 11g has the same UOID as in oracle 10. But DAFAULT_CONFIGURATION in 11g has different UOID from DAFAULT_CONFIGURATION in 10g. It is always the same UIOD for every new 11g installation (I've upgraded repository on many databases).
    Now 3rd question: Is there any particular reason why DEFAULT_CONFIGURATION  has different UOID in 11g and MY_PROJECT hast the same UOID ? Is there any logic behind it -that I fail to grasp ?
    Another thing. I said that I am importing complete Project in the new repository with update option with matching on UIOD. I should get a problem with DAFAULT_CONFIGURATION, I thought, since it is in the full export of the Project and DEFAULT_CONFIGURATION has different UOID than in 11g repository.
    But I did not get the problem at all.Default Configuration was simply skipped during the import - visible from the import log.
    Therefore 4th question : Why didnät OWB try to import DEAFULT_CONFIG? Is it "internal" object and as such cant't be changed ?
    The reason I am so obsessed with UOIDs is that we have automated release procedure (between development, test and production repositores) which is based on comparing UOIDs.
    Therefore a s slight trace of concearn on my side, because the DEAFULT CONFIG now has different UOIDs than before. But on the other side, we just propagate mappings and workflows between repositories - I do not see why the default config should matter here .
    Thank very much in advance for any answers/suggestions/ideas and comments!
    Edited by: Reggy on 27.01.2012 07:12
    Edited by: Reggy on 27.01.2012 07:12

  • Question about the notification center (Mails and Reminders)

    Hello together,
    I just started using Mountain Lion and now I have some few questions about the notification center.
    1. Is it possible to show all reminds in the notification center? I have a lot of reminds without an date / time and they don't appear in the notification center.
    2. Is it possible to show the last five Mails in the notification center? I'm just seeing new incoming mails, but I would prefer it, if I could see the last five mails
         (no matter if readed or unreaded).
    Thank you very much for you help.
    Ratte1988       
    Hallo zusammen,
    ich habe gerade damit begonnen Mountain Lion zu verweden und habe einige Fragen zur Mitteilungszentrale.
    1. Ist es möglich alle Erinnerungen in der Zentrale anzuzeigen? Ich habe viele Erinnerungen, die ohne Datum / Uhrzeit sind und in der Mitteilungszentrale
         daher nicht auftauchen.
    2. Ist es möglich, sich die letzten fünf Mails in der Zentrale anzeigen zu lassen? Ich sehe nur neue ungelesene Mails, würde es aber vorziehen die letzten
         fünf Mails sehen zu können (egal ob gelesen oder ungelesen.)
    Danke für eure Hilfe.
    Ratte1988

    Only reminders with dates appear in the notification center - undated ones don't. Once an email has been read, it is removed from the notification center. Apple has a feedback center where you can offer suggestions.

  • A few question about iPhone OS in CS5 and CS5 in general.

    Hi,
    I'm an IT trainer and I am trying to introduce my students to programming for iPhone/iPod Touch. (They are Secondary 2 students. 14 years old) The school is using a windows computer and CS5 right now is the best for the class (Not a steep learning curve and a user-friendly program). I know about the problems over the iPhone OS in CS5 with Apple but I was told it is still available for use. Furthermore, we have no intention of bringing the apps created to the Apple Store. I've tried the trial version and before I make any purchase, I would actually like to ask a few questions.
    Is the iPhone OS in the trial version itself complete? Is there anything left out from the trial version because when I tried it, it seems fine however I did not try publishing to an iPhone due to the certificates. Is there a reason for the certificate? Is there any way around it because if there isn't do I need to get a certificate for every single student? (I'm looking at a class of 40 students.) Is the certificate available for windows platform?
    Lets say, I got myself a certificate, create a simple program and then publish it, can I immediately bring it over to iTunes and then sync? Will it work that way? I don't want it to be too tedious for the students to see the end result. I've done quite a few research and have come across people having problems bringing it into their devices. Those people mention about bringing it to Cydia and needing to jailbreak the device. The devices made available for the students are not jailbroken. Will iPhone OS with proper certification still need Cydia for use with their device? Will only jailbroken device allow a CS5 app? I hope you get what I'm trying to say. We as trainers do not support teaching students to jailbreak, so that's definitely a no-no.
    Another thing about CS5. Previously I have called customer support about the CS4 the school is using now and the problem with nested animation when publishing the animation as a video file, is this problem still in CS5? Does CS5 allow nested animation to be published as a video file? If it isn't, is there any way around it?
    Thank you for your time and patience in answering my questions.
    Regards,
    Shafuraa

    Dear Marco,
    Thanks for th links, its quite handy. One more help required from you as its related to Idsktune. I was just reruning the idsktune on Soalris 10 box where zfs file system used, and able to see the below warning
    WARNING: largefiles option is not present on mount of /, files may be limited to 2GB in size.
    Could you tell me this alert specific to zfs file system, I was searching the mount parameter options specific to file size, but not able to get anything. Below are the system parameters.
    bash-3.00$ ulimit -a
    core file size (blocks, -c) unlimited
    data seg size (kbytes, -d) unlimited
    file size (blocks, -f) unlimited
    open files (-n) 256
    pipe size (512 bytes, -p) 10
    stack size (kbytes, -s) 8192
    cpu time (seconds, -t) unlimited
    max user processes (-u) 29995
    virtual memory (kbytes, -v) unlimited
    In UFS file system I have noted, for such largefile option we are adding the "largefile" parameter in mount, below is such an example.
    /var/crash on /dev/md/dsk/d40 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1540028 on Thu Aug 19 14:54:11 2010
    Could you guide me on this file size warning specific to zfs file system.
    Many thanks in advance for your support,

  • Some questions about javacard 2.1.1 and smartcardio

    Hello i have some question about java card 2.1.1 and the smartcardio package.
    1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
    final static byte P1_CREATION_MODE = (byte) 0x01;
    final static byte INS_SIGN_MODE = (byte) 0x60;
    final static byte SmartCard_CLA = (byte) 0xB0;
    private void signMessage(APDU apdu) {
            byte[] buffer = apdu.getBuffer();
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            signature.init(privateKey, Signature.MODE_SIGN);
            short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
            apdu.setOutgoingLength((short) length);
            apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
            apdu.setOutgoing();
        }On the host side I use the following code to connect to the card and to send the sign apdu:
    if (TerminalFactory.getDefault().terminals().list().size() == 0) {
                LOGGER.log(Level.SEVERE, "No reader present");
                throw new NoSuchCardReader();
            /* Select the first terminal*/
            CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
            /* Is a card present? */
            if (!terminal.isCardPresent()) {
                LOGGER.log(Level.SEVERE, "No Card present!");
                throw new NoSuchCard();
            /* Set the card protocol */
         Card card = terminal.connect("*");
            ATR atr = card.getATR();
            LOGGER.fine(getHexString(atr.getBytes()));
            LOGGER.fine(getHexString(atr.getHistoricalBytes()));
            CardChannel channel = card.getBasicChannel();
            CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
         ResponseAPDU response = channel.transmit(cmd);
            card.disconnect(false);But this does not work and i got the following error
    javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
            at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
            at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
            at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
            at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
    Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
            at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
            at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
            ... 3 more2.) 3Des encryption
    I want to use the 3Des algorithm to encrypt my data. I use
    keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                        KeyBuilder.LENGTH_DES3_2KEY, false);
    cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
    3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
    new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
    // the method in the applet
    private void setServerKeyMod(APDU apdu) {
            byte[] buffer = apdu.getBuffer();
            try {
                byte byteRead = (byte) (apdu.setIncomingAndReceive());
                short off = ISO7816.OFFSET_CDATA;
                // strip of any integer padding
                if (buffer[off] == 0) {
                    off++;
                    byteRead--;
                publicKeyServer.setModulus(buffer, off, byteRead);
            } catch (APDUException ex) {
                ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
        }The error code is 6700
    4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
    CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
    java.lang.IllegalArgumentException: ne must not be negative
            at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
            at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
    If you need more code to help please let me know.
    Cheers
    Edited by: 858145 on 06.07.2011 08:23

    2) What is PKCS? what is the difference between
    PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
    PKCS #11: Cryptographic Token Interface Standard
    See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
    PKCS #15: Cryptographic Token Information Format Standard
    http://www.rsasecurity.com/rsalabs/node.asp?id=2141
    If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
    BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
    Jan

  • Some basic questions about rmi registry  context  "bind" and "lookup"

    We have more processing to do than can be accomplished with a single computer. To solve the problem I've implemented a distributed computing solution using RMI. (The first time I saw RMI was about 2 weeks ago, so please bear with me!)
    The implementation is a proof of concept not a fully fleshed out system. I have one "Workunit Distributor" computer and any number of "Data Processor" computers all on the same lan segment. "Workunit Distributor" and "Data Processor" computers are both RMI client and server to each other. The "Data Processor" computers are given the ip address and name of the "Data Distributor" on the commandline when they start. They communicate their willingness to receive and process a workunit to the ""Workunit Distributor" via a RMI call. Work units are sent to available "DataProcessors" and results are eventually returned to the "WorkunitDistributor" (minutes or hours later). The model program works quite well, and appears to be capable of doing the processing we need to get done.
    But now that it seems viable, I've been asked to make it a little more scalable, flexible and self configuring. In particular, instead of one "Workunit Distributor", any number of "Workunit Distributors" should be allowed to show up or disappear from the lan at any time and the system should continue to function. I've worked out a good scheme for how this can be done, but I have a couple of questions about the RMI registry (registries?). I'm trying to keep from implementing some functionality that may already be available as a library or subsystem.
    With my current model design, each computer binds to its own registry with a unique name. For instance:
    CRDataProcessorImpl crdpi = new CRDataProcessorImpl(svr);
    Context crDataProcessingContext = new InitialContext();
    crDataProcessingContext.bind("rmi:"+hostName, crdpi);
    Currently the "Data Processors" get the info they need for a Context lookup() of the one and only "Workunit Distributor" from the commandline. And the info the "Workunit Distributor" needs to do a Context lookup() of a "DataProcessor" is passed to it from each "DataProcessor" via a RMI call.
    But in the newer (yet to be implemented) scheme where any and all "Workunit Distributors" show up and disappear whenever they feel like, the naming bootstrapping scheme described above won't work.
    I can imagine a few ways of solving this problem. For instance, having "Workunit Distributors" multicast their contact information on the lan and have a worker thread on each "Data Processor" keep track of the naming information that was multicast. Another alternative (more organized, but more complex) might be to have a dedicated host with a "well known" address and port that "Workunit Distributors" and "Data Processors" could all go to, to register or look up at an application level. Sort of a "domain name service" for RMI. But both these schemes look like a lot of work to implement , debug and maintain.
    The BEST thing would be if there was one plain vanilla RMI registry that was usable by all RMI enabled computers instead of having each computer have its own local name registry. In volume 2 of the Core Java2 book it says that every registry must be local. I'm only hoping there's been progress since the book was published and now a central rmi registry is available.
    If you have any ideas about this I'd like to hear what you know.
    Thanks in advance for any advice.
    Lenny Wintfeld
    ps - I don't believe web services, as full featured as it is, is a useful alternative. I'm moving 100's (in the future possibly 1000's) of megabytes back an forth for processing.

    The local bind/rebind/unbind restriction is still there and it will always be there.
    I would look at
    (a) RMI/IIOP, where you use COSNaming as a registry, which doesn't have that registriction, and which also has location-independent object identifiers
    (b) Jini.

Maybe you are looking for