Question about Director Flash Components's TextInput
Hello,everybody! I used the Flash Components's TextInput in Director 11.5,but there was a problem that when the TextInput in edit status the cursor is missing. And the TextInput still can be edited ! I want when the TextInput in edit status the cursor shows. Please give me a hand, how to solve the problem. Thank you very much.
Yeah, this is the new 10.3. It installs a Preference Pane in Other in Sys Prefs. You can select a number of settings there. I basically allow it to do as little as possible, except for the update notification.
In storage, I would select "Block all sites from storing...." (That's the option to disable "Local Shared Objects," Adobe's cute euphemism for cookies. Until now, they have been hidden away in the Macromedia folder in your home folder>Library>Preferences where I've locked everything up, after trashing the Macromedia folder and getting a new one after visiting http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_man ager07.html)
I can give you instructions for doing that. Post back if you want them. Not sure how effective the new Pref Pane is, especially now that I see it reset the default of "Allow sites to save...." and all the defaults. Maybe it only sticks from an admin account and I recently started running from a standard account, while using an admin account solely for authentication. I will have to look into that.
Definitely turn off Camera and Mic. In Playback check "Block all sites...."
Similar Messages
-
A question about my flash builder
Hi, i have a question about flash builder. I'm new on this and i want to learned more. The question is, i have four color picker and a shirt, i want when i change the color on the colorpicker it paints a part of the shirt. One color picker will change the color only of the body, another the color of the sleeves and so on. Can someone help and explain how i can do that???
Hi there
Click the link below and read the line presented in bright red. Then click the link provided and follow the steps.
Click here to view
Best of luck to you in finding your solution! Rick -
A few questions about Adobe Flash
questions:
1.Can adobe flash use web services?
2.How does adobe flash handle the back button or bookmarks?
3.Can adobe flash interact with javascript on a page? Like
call a javascript function and pass it XML as a
parameter?
4.How does adobe flash handle asychronous post backs?
5.Can flash interact with cookies or store information on the
users computer which the flash file can interact
with?
6.Can a adobe flash file be created dynamicaly on the server,
so the flash file the user receives will be more
tailored to them? Or is the Flash file just a static compiled
file thats imported into the html? By this I
mean can the information and images and menus the flash file
will display be pulled from a database and
dynamically generated per user?
7.I've read somewhere a while back that google was trying to
make flash files serchabe so that they can be
listed on googles search engine. Is this an easy
implementation or can only professional flash programmers
accomplish this?
8.Whats the learning curve for learning adobe flash, if I
have many years experience in programming web
applications using html, css, vb.net, and javascript? Not
just learning actionscript but also learning how to
use Adobe flash to create full flash websites?
Okay, so thats more than a few questions :) Once I started
writing my first few I just couldn't stop. But please anyone who
can answer these would be of great help to me in deciding if I
should invest any time into adobe flash.
Thanks for your time,
Evan>>1.Can adobe flash use web services?
Yes
2.How does adobe flash handle the back button or bookmarks?
It doesn't, but you can use SWFAddress to do just that. Works
great.
3.Can adobe flash interact with javascript on a page? Like
call a
javascript
function and pass it XML as a parameter?
Yes.
4.How does adobe flash handle asychronous post backs?
All net calls are asynchronous - you can use
LoadVars.sendAndLoad or
remoting... I like AMFPHP for remoting.
5.Can flash interact with cookies or store information on
the users
computer
which the flash file can interact with?
Yes - you can use a server-side language like PHP to set
cookies directly,
or use Flash's built in cookie like feature: The Shared
Object
6.Can a adobe flash file be created dynamicaly on the
server, so the flash
file the user receives will be more tailored to them? Or is
the Flash file
just a static compiled file thats imported into the html? By
this I mean
can the information and images and menus the flash file will
display be
pulled from a database and dynamically generated per user?
Entire flash sites can be dynamic - it's what I do... I use
PHP / AMFPHP and
MySQL to build dynamic flash content.
7.I've read somewhere a while back that google was trying to
make flash
files serchabe so that they can be listed on googles search
engine. Is
this an easy implementation or can only professional flash
programmers
accomplish this?
Easy is a relative term... the best way right now is to use
SWFObject
(Google for swfobject seo) - essentially you build an html
site inside the
Flash's <div> so the spiders will see the alternate
content.
8.Whats the learning curve for learning adobe flash, if I
have many years
experience in programming web applications using html, css,
vb.net, and
javascript? Not just learning actionscript but also learning
how to use
Adobe flash to create full flash websites?
If you have experience programming the curve will be
smaller... but there
are lots of elements to absorb. And no matter what, you
always have more to
learn.
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
I have a question about Adobe Flash Player 10.1 Beta for Mobile.
Hi everyone. I'm newbie at forum , if I opened this topic to the wrong place ; please , excuse me I'm an HTC HD2 user. And I noticed that ; Flash 10.1 support to the Android OS had come to HTC Google Nexus One , with "Froyo" update. I watched some videos at Youtube , about "Open Screen Project" (that Adobe leads) . And Adrian Ludwig(at Flash team) was using HTC HD2 and showing the Flash 10.1 at phone. I'm thinking that , if he used Flash at HTC HD2 , then there must be a release for phone too. I'm not sure , it's very important for me. Thank you , for your answers. Have a nice day.
Whoops, my bad. Didn't note that HD2 is WinMo.
As I understand it (and I am just a consumer, not official in any way) - the intention is to get 10.1 on every device possible, including the iPlatform if Apple ever decides to change their mind (HA!).
As for the status of WinMo currently, I am not sure about that. I know 10.1 is being tested on Blackberry, Palm, and Android for sure, but I don't know what Microsoft has been up to, considering they have their own competing tech at stake here too...
If I had to take a guess (and it would be a guess) I would say that the highest probability is 10.1 on WinMo7 devices, though I have no information to back that up, its just a guess. -
Quick question about my flash site and facebook
I have a XML Flash template that I bought and customized to my likings, I used coda html editor to customize it, my question is how do I add the like button from face book, I went to facebook and did the steps to get my code to plug into my website, do I use the iframe code or the XBML code they gave and is ther eanything special I need to do code wise? it is not working when I copy and paste it, thanks for anyone who can help.
hi Chris951,
For the PowerDVD, is the image below the same error that you're getting?
- Link to picture
If it is, can you try the following:
1. After running the Power DVD 10 BD installer, close the error message and navigate to the C:\Drivers\PowerDVD 10 BD folder
2. Right click on Custom.ini and choose Edit (this will open Notepad). From here, look for the LEGEND Dragon entry and change it to Lenovo then save. When finished, run the setup.exe and PowerDVD should now install successfully.
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Random question about the flash player
Hi, to make this question simple... I was wondering if the
flash player could somehow be hindered by windows vista?
I ask because I have a laptop running Vista, and a Linux box
right next to me, and I dual boot Ubuntu on my laptop. When I test
my application on the Linux boxes, they run exactly as I have
programmed them. The only machine where my application gets screwed
up is on the Vista OS. I started to think that maybe Vista screws
with the flash players ability to function, could that be possible
or even true? I mean, I think SilverLight is a competitor of the
Flash Player, so I guess that's where my conspiracy theory comes
from. Any thoughts or input? Yes there could be a bug in my code.
I'm iterating through the display list and applying "x" tweens to
them, moving them all to x = 5. some of the display objects don't
make it to coordinate 5, and so go beyond. I attached part of my
code that moves the thumbnails. you can view it here on the web:
kurtcom.com/actionscript3/PhotoProgram.swfThe camera is the object called camFrame in the FLA. It is
shaped like a rectangle. Simply copy the camFrame to any other FLA
and it will work. Note that it will base its measurements on the
Stage size in your new FLA. So the camFrame should be resized to
the Stage size (e.g. 550 x 400) to start with, and then resized
proportionally.
If you apply a tint to the camFrame, it will tint the entire
scene. Thus, you can do a neat fade-in by applying a black 100%
tint to the camFrame in frame 1, and then removing the tint in
frame 20 (for example) and applying a tween. -
Basic question about part-flash websites
Okay, so really basic stupid question:
If I'm making an html-based site with flash elements (like a
table of contents, header, etc), then how do I avoid having to
reload the movie every time I go to a new page? Ie, if I have a
flash contents bar, then won't the user have to click to restart
the movie in order to go to a new link every time it loads, which
would translate to every new page that the file is embedded into?
I know I must be missing something obvious, but I'm not sure
what it is :-) I'm working with a template that does this right
now, and it's really annoying-- how do well put together sites deal
with this question?
Thanks!have the buttons load the page into a frame, so the page
doesn't need to 'refresh'.
EX:
my_btn.onRelease = function(){
getURL("myContentPage.html", "myContentFrame");
my_btn2.onRelease = function(){
getURL("myHomePage.html", "myHomeFrame");
and so on... -
I am wanting to make an interactive photo album. I want a
main menu that will have each family member, then when you click on
it, it will take you to the pictures and you can scroll through
them, by page, and you can click on them to make them larger.
Can this be done with Director? If not, could you suggest a
program.
Thanks in advance for the help!Hi Nim,
You could very easily create an application in Director for a
photo album effect.
In fact, I've created many myself. However, with everything
in Director, you'll
need to design the look and feel yourself from scratch and
you'll have to program
all the interactive elements. Director does not come with
templates for 'typical'
applications.
For photoalbums, there is other software designed
specifically for this purpose
that simplifies the process. I'm sure if you search 'photo
album software' in
Google, you'll come up with a few. One web based photo album
program is JAlbum:
http://jalbum.net/
It's free and is quite a nifty application.Very easy to use.
You can choose a
template, point to a folder of JPGs, and in seconds, it
generates web-based
interactive slide show of the images based on the look and
feel in the chosen
template.
The advantage of a program like JAlbum is that it is much
faster to create your
application as you have a predefned structure to work with.
The disadvantage may be
any limitations of that structure.
So, your choice is to use Director with the advantages of
- total control of the design of the application and how the
inetractivity will
work
- can include complex interactivity with the only limitations
bases on your own
knowledge
- can create sophisticated multimedia applications beyond
photo-albums
- is extremely powerful
Disadvantages
- Because it can do so much, can be difficult to learn
everything quickly
- Is not cheap if you're just getting it for a one off
purpose
Anyway, hope that answers your question.
If you do go into Director, it is a great application, and
there are lots of web
resources to help you get started, including my own tutorials
at:
http://www.fbe.unsw.edu.au/learning/director/
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director/
http://www.multimediacreative.com.au -
I am about to use MIS Live Update to flash BIOS 1.4 to my motherboard. First, is this a bad idea, or are there safer ways of doing this procedure? (to use live update instead of other methods?)
Second, it says 2. Please Disable the item (BIOS Protection) In BIOS Setup first. (Depending on mainboard). Does the K8N Neo Plat. have this option? I can't find it in the manuel or bios setup.
If there are safer methods, anybody have and good sites I can read about it?@tscenter:
I partly agree with you about floppydisks enduring for nearly 2 decades: I can remember myself going up and down my friends house for at least 10 times when I was young, because floppy with .a02 .a07 .a12 .a13 .a17 and a24 of an ARJ file had CRC errors on it! So I think floppy endured only because there was no better alternative (and don't tell me ZIP-drive was a good alternative, because how many poeple do you know who actually use this for non-business data swapping?)
Anyhow...
I just booted with USB-FDD (Win98SE bootdisk) and copied the needed files for flashing to 1.55 beta onto my only FAT32 partition.
Flash procedure went okay, but I lost my nVidia NIC in Windows... Well at least I couldn't get it to receive an DHCP offer from my NAT/router. I got a strange looking 160.x.x.x somewhat IP with netmask 255.0.0.0 So I quickly flashed back to the official 1.40 (and NO commandline switches after AWFL833C.exe)
I used this guide by syar2003:
Quote
Remember :
Enter bios and load optimized default + save/exit , before flashing .
Do the flashing to 1.55 with AWFL833D W7030NMS.155 /py/sn/wb/cc/cd/cp/f/r
Enter bios and load optimized default , and save .Important .
Boot once again after this without any changes/editing in bios to floppy prompt and let the dmi pool build and update itself.
Then boot/edit bios set your individual bios preferences.
(see: https://forum-en.msi.com/index.php?threadid=59711&sid=)
Does the /wb switch that syar2003 adds to the commandline freak-up my nVidia NIC (or it's MAC for that matter?)? -
A question about the Flash intro for the Zen Mic
Message Edited by davidz on 09-0-2005 09:42 PM
davidz wrote:Hello: This is going to sound incredibly stupid, but I want to know where the music on the flash for the Zen Micro is from. The music is very soothing and I tried looking in the source code for a media file.. but to no avail. If anybody could tell me, I'd appreciate it. Thanks a lot. - David.
I don't know but I bet this is what you are looking for: http://home.ripway.com/2005-4/282720/microflash.wav (on the flash its a 7second song that just repeats) well thats what you were looking for.~Derek -
Question about adding multiple components....
.....HI, i really hope someone can help out......
When I try to add mutilple components to the panel, it won't show the components that I have added before again.....
For example, I have a Icon Label and I want it to show two of the same Label again in the panel.... but it won't... it will just show one of them....
for example:
Label[] dice = new Label[6]
Icon bug[] = new Icon[6];
String dicePics[] = {"1.jpg", "2.jpg","3.jpg",
"4.jpg","5.jpg","6.jpg",};
for(int i=0; i<6; i++){
bug[i] = new ImageIcon(dicePics);
dice[i] = new JLabel();
dice[i].setIcon( bug[i] );
userPanel.add(dice[0]);
userPanel.add(dice[0]);
This will only show dice[0] once in panel........ how can I show the same things over again in a panel more then once.........?? I also try it on other things... when adding a component with same name, it will just show one of them.......... wondering if someone can help me out............HI, i really hope someone can help out......
When I try to add mutilple components to the panel,
it won't show the components that I have added before
again.....
For example, I have a Icon Label and I want it to
show two of the same Label again in the panel.... but
it won't... it will just show one of them....
for example:
Label[] dice = new Label[6]
Icon bug[] = new Icon[6];
String dicePics[] = {"1.jpg", "2.jpg","3.jpg",
"4.jpg","5.jpg","6.jpg",};
for(int i=0; i<6; i++){
bug[i] = new ImageIcon(dicePics);
dice[i] = new JLabel();
dice[i].setIcon( bug[i] );
l.add(dice[0]);
userPanel.add(dice[0]);
This will only show dice[0] once in panel........ how
can I show the same things over again in a panel more
then once.........?? I also try it on other
things... when adding a component with same name, it
will just show one of them.......... wondering if
someone can help me out.......
You can't add the same GUI object to a Container multiple times. The problem is with your design. Consider something like this:
import java.awt.BorderLayout;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.Random;
import javax.swing.Icon;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
public class DieLabelTest {
private Random rand = new Random();
private final JLabel[] dies = new JLabel[6];
DieLabelTest() {
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel diePanel = new JPanel(new GridLayout(3,0,5,5));
for (int i = 0; i < 6; i++) {
dies[i] = new JLabel();
dies.setIcon(DieIconProvider.getIcon(rand.nextInt(6) + 1));
diePanel.add(dies[i]);
f.add(diePanel, BorderLayout.CENTER);
JButton rollButton = new JButton("Roll");
rollButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
for (int i = 0; i < 6; i++) {
dies[i].setIcon(DieIconProvider.getIcon(rand.nextInt(6) + 1));
f.add(rollButton, BorderLayout.SOUTH);
f.pack();
f.setVisible(true);
public static void main(String[] args) {
new DieLabelTest();
class DieIconProvider {
private static Icon[] icons = new Icon[6];
public static synchronized Icon getIcon(int num) {
if (icons[num - 1] == null) {
icons[num - 1] = new ImageIcon(num + ".jpg");
return icons[num -1]; -
Newbie question about directories
Hi,
I've written an applet that will be built into a website. It will be used by multiple users that require different fuctionalities in this applet. However, many utilities are generic. The generic utilities (classes) are located in a separate directory (I never want to change those) and the specicfic classes are located in specific directories.
Now the applet (JApplet) itself is located in the specific directory. How do I access in the (applet) code the classes located in the generic directories?
Am I making any sense?I believe you can use the codebase attribute to the applet tag to say where the classes are. However, it may be easier just to make one or a few jar files containing all the relevant classes.
-
Question about running flash from a DVD
I'd like to create an install splash screen which is
developed using Adobe Flash or Flex because if the rich
capabilities in Flash. When a user inserts the DVD, I want my
splash screen to autorun. The only problem I see is that the user
is required to have the flash player installed. Is there a way to
carry runtime libraries on the DVD so that I can run the splash
screen without requiring the user to install Flash? Thanks.Thank you. Exactly what I needed. I'm new to Flash and Flex,
but am getting hooked fast!!!!! -
Questions About "Usable" Flashed GFX Cards vs "True" Mac Designed Ones
Hi guys I figured that this would be a good place to try and clarify my problem. I want to get a nice ATi card to upgrade my MMD G4. For the few games that I play the machine is showing its age and while yes I know a whole new computer would be the ideal choice it seems reasonable that going from the dinky stock 64MB card to a nice performance 256MB card would help a great deal.
http://cgi.ebay.com/Mac-ATi-Radeon-9800-XT-256Mb-Video-Card-G4-4x-G5-AGPW0QQitemZ260267585968QQcmdZViewItem?hash=item260267585968&_trkparms=72%3A392%7C3 9%3A1%7C66%3A2%7C65%3A12&trksid=p3286.c0.m14.l1318
I see things on eBay like this often and several searches on this forum tell me only part of the story. It sounds like flashing these PC cards BOIS will give you a card that will function on the Mac system and give full support for the Core Image and Animation on the OS but it is not clear to me if a card like this would have full support in a game like World of Warcraft.
It something like this a safe buy to consider? Do any of you have one of these cards and could comment on it's performance? I would be ok dropping $150ish for a nice card but not one that just give me a boots to the graphics in the OS. It would need to work for the game as well.
Any direction is appreciated.
-Rich
Message was edited by: IbilishHi-
Welcome to Discussions!
A flashed card, especially the ATI cards, simply is removing the Windows ROM and replacing with a full Mac ROM.
Geforce cards often require a modified ROM, because the ROM for Mac version Geforce cards is larger than the ROM chip on PC version cards.
Even with the reduced ROM, and especially with ATI cards, the flashed version becomes a Mac version. All features and functions are available, and full OS compatibility is present.
Of course, one of the main reasons for graphics upgrades is gaming. With flashed cards that have a direct Mac edition cousin, with very few exceptions, there is no difference to the game or OS regarding a "true mac version" and a flashed version. Function is identical. With ATI, the only exception is the X800, which functions normally, but only via the VGA port. There are some Geforce exceptions, with the 6200 being the most notable, having limits on OS support.
The linked card is a good performance choice. The linked cards seller is very reliable, and does an excellent job of prepping the cards. They work. Highly recommended.
One caveat of using flashed cards, though not a problem, is PC cards are all pretty much 8x AGP compatible, backwards compatible to 4x AGP. However, Apple created the ADC capable G4's by using then unused pins to power the ADC port. If an 8x card is installed without modification, the machine appears dead. Nothing will happen. the easiest, and least destructive work around is to tape the #3 and #11 pins on the card. Once done, a 4x AGP G4 will enjoy the power and performance of the new card with no ill effect.
How and Why to Disable Pins 3 and 11 on AGP 8x cards in your Power Mac G4 -
Answering my own Question about installing flash player on an Ipad
I need to access certain sites for my job whilst out on location. I realised my Ipad couldn't get Adobe Flash Player, so I looked around for options.
For anyone else who needs a fix, here's how I can access all the web pages I need:
Install - and pay for - Splashtop. Then set it up (easy) with any "always on" laptop or desktop.
You can then remotely access that desktop from site and see any web pages on your Ipad. You can access any files on the desktop and, even better, you can type in web addresses from the Ipad and view them live.
There is a small monthly fee for roaming, but it's bugger all really and well worth it for me!
Hope this helps some of you.Apple also recommends SkyFire as a browser when you must view Flash content. https://itunes.apple.com/us/app/skyfire-web-browser-your-path/id384941497?mt=8
Maybe you are looking for
-
Every time I fire up my iMac a window pops up saying "Mount notification quit unexpectedly" and it gives me the option to either "Reopen" it or click OK, which gets rid of it. What is this please and how can i stop it?
-
How to change the colour of row in ALV depending on condition?
Hi All, I want to change the color(from green to red )of perticular row in ALV depending on certain conditions like if amount in some field in row is more than 5000. Can anybody please tell me how to do that? expecting early reply. Thanks in advance,
-
Automatic PO creation in T_code MIGO
Hi Gurus, I want system to create automatic PO in T_code MIGO , i.e. Goods Receipt document as well as PO No. for reference. What are the steps / customization is required. Thanks & Regards, Vikas
-
I recently downloaded Mlountain Lion on my Imac. It shows that I have an update for Evernote that should be downloaded, but I cannot find out how to complete this update. It asks for me to sign in with my email address, but does not show how to do th
-
Hi, I need English instructions for my Adobe Acrobat, I have a brandnew HP laptop with windows 8. Do I just need to simply unistall and reinstall the soft ware from Adobe site? Bapak Daud