Question about displaying data

Based on the search criteria I need to show some info. with check box on each item, but it might retrun upto fifty items (between 1 to 50 items). Should I create checkbox/output text dynamically or how do I handle this scenario? In the jspx how do I loop it and display? Thank you.

hi user13094256
See my reply in your other forum thread with the same question
at Question about displaying data
regards
Jan Vervecken

Similar Messages

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Sql developer: question about exporting data

Hi,
we're recently working with sql-developer. i've got a question about how we can export query results to txt/csv files for use in other applications.
First a problem: if we start a query that looks like this:
select * from
select * from A where start_date = &date
) a,
select * from B where start_date = &date
) b
where a.name = b.name
Sql-developer asks twice to input a value for the variable 'date', although it's the same variable and it's supposed to have the same value.
We solve this by making a script:
first we define the variable, then we put the query.
When we start the script, the query runs ok and sql developer asks to input the value for the variable once.
But now the result of the query is shown in the script output. The script output seems to be limited in number of lines and difficult to export.
So my question is: what's the best way to export query results to txt/csv files, avoiding the problem mentioned above?
i hope there is a solution where we can use a single query or script.
Thanks in advance!

Using bind variables like ":date" should solve the problem of being asked twice for the same thing.
Executing the query normally (F9), gives you the export options you require through the context menu inside the Results grid.
Regards,
K.

Question about inputting data to a pivot table

Hi,
I have 2 questions about using the ADF pivot table component (I would like it for data input).
1. Is it possible to paste into multiple cells (i.e. using cut in Excel for example, and then pasting the cells into the pivot table) ?
2. What is the recommended approach for the case where there is no data values (no rows on the database table)? For example, if I have regions, products, measures and time periods and then want to be able to select some regions and some products to enter new sales figures - and then create the rows on the database with save button, is there a recommended way to do this?
(Jdeveloper version: 11.1.2.0.0)

Anybody able to help with this?

A simple question about DAQ data sampling

Hi all:
Now I meet a very basic question about DAQ sampling. I am using NI PCI-6040E DAQ card, SCXI-1001 chasis, SCXI-1102, SCXI1300 terminal block, and SCXI1160 relay module.
I am not sure , is it possible if I want to test a voltage (1 volt) on a resistor. Now I am connecting the Ch0+ to resistor+ (24 volt), and connecting Ch0- to resistor-(23 volt). So the voltage between resistor+ and resistor- should be 1volt. Actually, It is working at the first, but after I want to test 9 channels based on this connection. The Measurement & Automation can't read data from the DAQ card. (when I test it by multimeter, I can get the voltage data on the Ch0+ and Ch0- of SCXI1300 terminal block).
That's strange, does anybody know what' s wrong about it?/
Thanks a lot

Hi hanwei,
According to the specifications of the PCI 6040E (page 3), the input signal and common mode voltage should never exceed 11V from ground. I believe this is the reason you are able to measure the potential of a battery but not the 24V signal (even though the differential value is only 1V).
Best Regards
Hani R.
Applications Engineer
National Instruments

Verizon iPhone - mobile hotspot and other questions about the data options

I just ordered the Verizon iPhone. Can anyone explain the options here:
1) Unlimited corporate email & Web (business and personal email) vs. Unlimited email and web for smartphones (personal email) - what's the difference?
2) "3G Mobile Hotspot 2GB" - does this mean that there's no way I can share my 3G connection via wifi without paying the extra $20/month?? How about tethering to a single computer (USB, BT, or WiFi) - does that also require this extra option?
3) equipment protection - what's the difference between Extended Warranty, Asurion Wireless Phone Protection, and Total Equipment Coverage?
thanks in advance,
Mike

Hi
Regarding your #2 question; yes, you must pay $20/mo to use the 3G Hotspot aspect of the iPhone, same as with any of Verizon's phones that offer this feature such as the Droid X, HTC phones, etc. And, there is NO additional charge to tether it to your computer; it's $20/mo regardless. You can still use the iPhone's WiFi feature to search the web which is part of the regular data plan. We're only talking about paying the $20/mo for the "up to 5 devices" jumping on your phone as a hot spot.
I'm an Apple fan, have my MacBook Pro, but my phone is a Droid X. I've been a Verizon member since a year before they became Verizon. Additionally, I am part of the Verizon & Motorola test forum; testing new software updates as they come along.
Something you should know about Verizon's 3G Hot Spot feature; it has issues. Those of us in the Motorola & HTC forums have experienced identical issues with regard to the 3G Hot Spot feature; it disconnects every 2 minutes, even when you are actively surfing the net. Verizon & Motorola Support have been very helpful to provide what they believe are fixes, including: changing the channel, hard resets, clearing cache, etc. It does not work. Most of us believe, this is NOT a Verizon issue, but a phone maker issue.
I also have Verizon's MiFi 2200. It costs $59/mo and is purely a hot spot device; again up to 5 devices. I use it at home, for my lap top and for those who need connectivity. It outperforms the 3G hot spot feature of the Motorola & HTC phones by leaps & bounds, and I suspect it will out perform the 3G hot spot feature on the iPhone. Additionally, you get 5GB of download with the MiFi which Verizon is planning on offering increases to 8GB & 10GB. There is NO plan to increase the 2GB download limitation on the 3G Hot spot of the iPhone & other phones, and anyone who does basic software downloads & pics, knows 2GBS is not a lot space.
So, I would recommend not paying the $20 until this is resolved. If you do, you could pay $39 more for a total of $59/mo for the MiFi, download the software to you home computer & notebook, and end up canceling your home internet service. I did this and have saved $70/mo in my total utilities.
One other important note: Verizon's VZManager Software for their phones & MiFi. If you did pay the $20/mo for the iPhone and decided to tether to your USB port (for power while using) and you were to use the 3G hot spot feature, it will NOT work on 64 Bit computers, regardless if you are using the WiFi feature or directly using VZManager. The MiFi has this same issue. It will only work on 32 Bit when tethered. So, you'd have to reboot your computer to 32 Bit, if you have that ability. On a Macbook Pro, simply restart holding down the "3" & "2" keys.
I have no idea why Verizon can't simply upgrade the firmware, even recent firmware upgrades have not resolved this. Most new computers are 64 Bit now.
Despite this, I use my MiFi 100% untethered and carry my charge cord in my bag as it also works on my Droid, and I presume they may do the same for the iPhone; reduces the need for multiple power cords.
I really looked forward to the 3G feature of the Motorola & HTC phones, but honestly, it's just not there yet; mine was slower than Dial Up, and I'm not kidding.

Question about transferring data from 3GS to iPhone 5

I upgraded from 3GS to iPhone 5. Before reading any articles on transferring data through iTunes, I configured my 3 email programs, contacts and calendar (Google). The Apple instuctions state that I should backup 3GS FIRST, then restore to iPhone 5. Question is, if I do the backup and restore AFTER having configured my mail programs, will that cause problems, such as creating duplicate accounts and contacts? I am especially concerned about creating duplicates in my contact list, which would be a semi-horror if I had to delete every other one of over 1,700 names. Perhaps I should delete my email accounts and contact list BEFORE restoring to my iPhone 5, basically start from scratch?

When restoring the device, whatever is currently setup on the device is irrelevant. Everything currently setup on the device will be erased.

Newbie question about livecycle data services es

Hi all.
i've downloaded the LiveCycle ES2 VMware virtual appliance, setup it up on a esxi server, workspace, content space, all are up and running, but here comes my question, how do i install livecycle data services in there?how do i set it up to start working with the rest?
i've read the documentation on how to install, but i'm a bit confused.
can anyone give me any pointers about this?
help would be appreciated
thanks in advance

1) In Workbench ES2 create a process to create a new user. If you need to create a group there is also a service to create group. Create a short-lived process using the Avoka service > Create User operation. The Create User operation has the inputs depicted below.
2) Create a process variable called 'newUserXml' of type 'xml' and declare the variable as input. Ideally, create a schema for the xml.
3) The Create User operation has a single output, a string containing the user ID. Create a process variable called 'userID' of type 'string' and declare the variable as output.
3) Save, check-in, and deploy the process.
4) To test the process, invoke the process from the Workbench. For the input variable, plug data into an xml structure such as this...
<NewUser>
<Login/>
<Password/>
<CommonName/>
<CanonicalName/>
<Description/>
<Email/>
<Initials/>
<OrgName/>
<Address/>
<Telephone/>
</NewUser>
5) If the test succeeds, you are ready to create the Flex application. If not, figure out why.
6) Build a Flex app. Once you deployed the process, the remoting endpoint is automatically created and can be accessed by Flex. Here is a stub.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="initChannelSet()">
<mx:Script>
<![CDATA[
import mx.messaging.channels.AMFChannel;
import mx.messaging.ChannelSet;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
private function initChannelSet():void {
var cs:ChannelSet= new ChannelSet();
cs.addChannel(new AMFChannel("my-amf","http://localhost:8080/remoting/messagebroker/amf"));
ro.channelSet = cs;
private function submitRequest():void {
var newUser:XML = new XML(getXmlData());
ro.setCredentials("administrator","password");
ro.invoke({newUserXml:newUser});
private function remotingResultHandler(event:ResultEvent):void {
var userID:String = event.result.userID;
private function remotingFaultHandler(event:FaultEvent):void {
Alert.show(event.fault.faultDetail.toString());
private function getXmlData():String {
var xmlStr:String = "<NewUser>"
+ "<Login>" + login.text + "</Login>"
+ "<Password>" + password.text + "</Password>"
+ "<CommonName>" + commonName.text + "</CommonName>"
+ "</NewUser>>";
return (xmlStr);
]]>
</mx:Script>
<mx:RemoteObject id="ro" destination="MyApplication/processes/CreateNewUser"
   result="remotingResultHandler(event)" fault="remotingFaultHandler(event)"/>
<mx:VBox>
   UI goes here...
   <mx:Button label="Submit" click="submitRequest()"/>
</mx:VBox>
</mx:Application>
Steve

Question about some date

Hi there:
My sales order was created on 11/12,then I went to schedule line item and selecing shipping tab,I found that delivery date is 11/23,goods issue date is 11/22,loading date is 11/19,material available date is 11/18,transportation plan date is 11/18,my question is what kind of setting leads to that dates? Or how the system calculate these date by what logic? Thanks.

There are plenty of threads you can see if you search the forum/google using backward/forward scheduling.
For example check the link in the WIKI forum [Available to Promise (ATP)|http://wiki.sdn.sap.com/wiki/display/ERPLO/AvailabletoPromise+%28ATP%29]
[What is Forward and Backward Scheduling?|http://www.sap-basis-abap.com/sd/what-is-forward-and-backward-scheduling.htm]
The data are obtained from the following;
1) Replishment lead time from material master MRP 3 view (or MRP2 view depending on whether the material is procured externally or produced internally).
2) Transit time and transport lead time - you can find the details in the route definition (path - spro->logistics execution -> shipping -> basic shipping funtion -> routes -> define routes ->define routes and stages
3) Loading time and pick/pack time - they are defined in the shipping point configuration at SPRO -> Enterprise structure->definition -> logistics execution ->define,copy,check shipping point. The same can also be seen in logistics execution -> scheduling section.
Regards

Question about migrating data from mac pro to new macbook

Hello all,
I ordered a new macbook today and i'm very excited. It will be the first time i've had two apple machines simultaneously. My question is in regards to getting my new macbook all stocked up with the files and apps currently residing on my mac pro.
1. I don't know if by using migration assistant if the data is removed from the old machine and added to the new. I don't want that. I want everything currently on my mac pro to remain, unchanged.
2. I'd normally use target disk mode, but no firewire on the macbook, so, no dice there.
3. My startup disk and apps and such reside on one HDD in my mac pro, while my home folder, or user files, or whatever, reside on a separate HDD. will this cause a problem.
Your input is much appreciated.

It can be done with USB, but it is slower and less reliable.
Ethernet works great, IF you have two FUNCTIONAL machines. The great thing about Firewire Target Disk mode was that if the HD/OS was corrupted, or the computer was for some reason unbootable you could still get data off of it quickly, without tools or special equipment. Firewire Target disk mode has saved my rear several times on every machine I have owned.
The hard drive is fairly easy to remove on the aluminum Macbook. I would remove it and install it in an external Firewire enclosure temporarily to transfer your files quickly and reliably, then put the drive back in the Macbook.
Firewire allows two operating modes. One is asynchronous, like USB which suffers from latency, bus contention and collisions.
The other is isochronous mode, and it lets a device carve out a certain dedicated amount of bandwidth that other devices can't touch. It gets a certain number of time slices each second all its own. The advantages for audio/video should be obvious: that stream of data can just keep on flowing, and as long as there isn't more bandwidth demand than the wire can handle, nothing will interfere with it. No collisions, no glitches.

I have a question about General Data Selection in Report Painter

Please help me out. Thi is the question....here it goes.
In a Report in ReportPainter, I have in the General Data Selection the following selected characteristics. They are:
Ledger = 0
Record Type = 0
Version = 1
Fiscal Year = Z-ANOACT
Period = (1CPERIV, 1CPERIB)
So that we have the next screen in the Reports execution.
Fiscal Year : 2006
From Period : 1
To Period : 12
Note:
*Z-ANOACT = Variable so that with a user-exit calculates the actual year. Right now is 2006.
*1CPERIV = This From-Period Variable is referenced to CCSS Table and PERBL Field Name. Its default value is 1.
*1CPERIB = This To-Period Variable is referenced to CCSS Table and PERBL Field Name.
Its default value is 12. Rigth now, we are in the fiscal month 5 (November).
Id like to filtrate information from January,2006,Period:07 to November,2007,Period:05.
I mean I work with the fiscal calendar because the information to get from the table is saved due to this calendar.
The Fiscal Calendar is from July to June:
Month          Period     Year
January          07     2006
February     08     2006
March          09     2006
April          10     2006
May          11     2006
June          12     2006
July          01     2007
Augost          02     2007
September     03     2007
October          04     2007
November     05     2007
December      06     2007
Right now, we are in November , 2006 (month=11) but according to the fiscal calendar we are in November, 2007 (month=5).
How I can accommodate my variables or what I am doing wrong so that I can select information from periods 7 to 12, 2006 ( January to June, 2006) and information from periods 1 to 5, 2007 (July to November, 2007) having the screen cited above so that report painter adds the 2 ranges.
I cannot do it with the criteria selection cited above because I only have a year and a range of periods and my end-user doesnt want to run my report twice:
One run with periods 7 to 12, 2006 and
Another run with periods 1 to 5, 2007 and then to add the 2 reports in excel to form a report.
Hed like something in my screen like this
Fiscal Year = 2006
From period = 7
To Period = 12
Fiscal Year = 2007
From period = 1
To Period = 5
And then report painter will add the 2 ranges.
Many Thanks if you know anything that can help me, please let me know.

Please help me out. Thi is the question....here it goes.
In a Report in ReportPainter, I have in the General Data Selection the following selected characteristics. They are:
Ledger = 0
Record Type = 0
Version = 1
Fiscal Year = Z-ANOACT
Period = (1CPERIV, 1CPERIB)
So that we have the next screen in the Reports execution.
Fiscal Year : 2006
From Period : 1
To Period : 12
Note:
*Z-ANOACT = Variable so that with a user-exit calculates the actual year. Right now is 2006.
*1CPERIV = This From-Period Variable is referenced to CCSS Table and PERBL Field Name. Its default value is 1.
*1CPERIB = This To-Period Variable is referenced to CCSS Table and PERBL Field Name.
Its default value is 12. Rigth now, we are in the fiscal month 5 (November).
Id like to filtrate information from January,2006,Period:07 to November,2007,Period:05.
I mean I work with the fiscal calendar because the information to get from the table is saved due to this calendar.
The Fiscal Calendar is from July to June:
Month          Period     Year
January          07     2006
February     08     2006
March          09     2006
April          10     2006
May          11     2006
June          12     2006
July          01     2007
Augost          02     2007
September     03     2007
October          04     2007
November     05     2007
December      06     2007
Right now, we are in November , 2006 (month=11) but according to the fiscal calendar we are in November, 2007 (month=5).
How I can accommodate my variables or what I am doing wrong so that I can select information from periods 7 to 12, 2006 ( January to June, 2006) and information from periods 1 to 5, 2007 (July to November, 2007) having the screen cited above so that report painter adds the 2 ranges.
I cannot do it with the criteria selection cited above because I only have a year and a range of periods and my end-user doesnt want to run my report twice:
One run with periods 7 to 12, 2006 and
Another run with periods 1 to 5, 2007 and then to add the 2 reports in excel to form a report.
Hed like something in my screen like this
Fiscal Year = 2006
From period = 7
To Period = 12
Fiscal Year = 2007
From period = 1
To Period = 5
And then report painter will add the 2 ranges.
Many Thanks if you know anything that can help me, please let me know.

A question about BPEL data formats

Hi everyone,
I am new to BPEL and have a question regarding the format of data "inside" BPEL variables. Perhaps someone can clear this up?
When defining a variable in BPEL, I can either give it an XML Schema simple or complex type - or a "WSDL message type". I am confused with regard to the last one. A WSDL message has parts, and the parts have types themselves. These types, however, can be from an arbitrary type language. XML Schema is one possibility, but there might be others. I have two questions with regard to this:
1) If I use some proprietary schema instead of XML Schema, can I handle data in this format in the BPEL process? I.e., can I assign "literal" data to the parts in my own format, and (if it is XML-based) manipulate it with XPath?
2) WSDL allows the definition of styles and encodings in the concrete part. How does the conversion happen between what's on the wire (in the SOAP body) and inside the BPEL variables? I.e. when using RPC/Encoded, does the Oracle BPEL engine automatically convert everything into plain-XML-Schema-validated-XML and back or does RPC/Encoded XML show up inside the variables? What if the BPEL engine doesn't understand the concrete format?
Thanks a lot!
Reto

Fabio,
I am not sure I understood you clearly. But ODI uses the underlying technology of the target database to perform the CDC. There are several KMs for each technology that let you achieve the same.
eg. For Oracle, a trigger based CDC is available which creates triggers on the underlying tables in the database to capture the changes.
Also for Oracle, a Logminer based CDC is available which reads the Oracle logs to capture the changes made over to tables.

Question about BC4J data tags, Oracle sessions and Locking!

Hi ,
I have seen numerous examples of JSPs using data tags and in all the examples the data tag for the application module has the "username" and "password" harcoded in it.
My questions are:
1) For a stateful application should we be including the username and password in every JSP page. I personally believe that we should not.
2) If we have a username and password in every JSP page will it not start a new ORACLE user session and if so will it not cause locking problems?
3) If we don't hard code the username and password in every JSP page, will it reuse the same ORACLE session ?
4) How do we avoid locking problems when we use data tags?
5)I can understand the inclusion of username and password in every JSP page if it is a stateless application but again Is there a way we can avoid hardcoding the username and password in every single page?
I would appreciate if some one can let me know if any of my assumptions are incorrect.
JDeveloper Team/Juan any advice?

The username and password are optional. They can be provided via the connections.properties file. The multple entries for username and password don't mean that separate connection are made. The first time the ApplicationModule tag is encountered, your application instance is created. If you are running in reserved mode (look at your releasePageResources tag) the application instance is kept until your Http session times out. If you are running in Stateful or Stateless mode, you application instance is returned to the application pool and retrieved the next time you need an instance. Please refer to the application pool documentation and to the source in oracle\jbo\common\ampool provided in jbohtmlsrc.zip.

Satellite A100-599 - question about display driver update

Hi,
I have a Satellite A100-599 with a NVIDIA 7600go graphic card and I have Bioshock like most of you the game crashes because of some problems with the graphic card drivers, no pb...in the meantime NVIDIA released some new patches to the Forceware and after I rechecked the Toshiba driver support database I saw a new release in the Display driver list for WinXp.
One of them seems to be from 13/09/2007. I downloaded the drivers, installed them and after I checked the driver details in the Device manager list and to my surprise the details said the drivers are from 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in the drivers archive and surprise ...the drivers are really the old ones from 2006. So my question is this: Do you have any Display Drivers for my model that work for Bioshock :D
Regards,Marian

I dont know if WE have. I think it would be took some long time to ask every single user: hey, do you have some drivers for blackmodjo? Ah, come on, please. Just a little bit of them... ;)
No, I have a better idea. Its like cooking a meal. The ingredients: DriverCleaner Pro and the website www.laptopvideo2go.com and .... ta ta ta TAAAA a lot of patience
To get some good "bio"shocked meal just follow this receipt:
Go to
http://www.laptopvideo2go.com/
read before you do anything (YES, even before you continue BREATHING) the FAQ-section on that site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
and then download the drivers. Do it, yes...
Then download drivercleaner by searching for it on www.google.com and THEN, read their Manual before doing anything else (Ok, you can continue breathing..)
After reading their manual you will something like:
1. Starting program, doing something, restarting machine
2. starting in safe mode, starting that program, removing..yadayadayada
3. Installing new driver
3. Playing Bioshock
4...
5..no..6. Thanking me and giving me your first born.. ;)
So, by cutting away around 40% of my humoristic stuff and following the constructive technical instructions from me you will be able to play bioshock.
Greets :)

Question about purchasing data of business partner in SRM 7.0

When we create vendor in ECC with transaction XK01, we can create pruchasing view and company code view of vendor.
But in SRM 7.0, I have not find any place abount company code and purchasing data about business partner?
Any one could provide some suggestions?
Tanks in advance!

Hi Justin,
As in previously releases, SRM 5.0 f.e., not all business partner data available in ECC is replicated in to the SRM procurement system (this can be enhanced via developments). The business partner structure in SAP SRM is different from the ECC business partner structure. SAP SRM business partner data only uses 1 view which holds all the data a vendor can have (BP function: vendor). There aren't any views/tabs in SRM.
Company code and purchasing data is determined via organisational schema (ppoma_bbp) and a company and purchasing organization have their own business partner master record in SAP SRM as well.
Note: Certain vendor business partner settings/parameters are better to maintain via the web transaction 'maintain business partner'.
Hope this helps.
Kind regards,
Tim
Edited by: T. Schuffelen on Mar 21, 2011 11:45 AM

Question about displaying data

Similar Messages

Maybe you are looking for