Question about drivers

I installed the vesa drivers for my ATI Radeon 9250, but it looked horrible, although I read vesa is just as a failsafe, which I can understand since my card doesn't work right away with other distributions.
I was wondering which driver would be the best for me, I don't game a whole lot, but it wouldn't be anything intensive seeing as what graphics card I have. I run in 1280x1024 resolution too.

If it helps, i use fglrx in a system w/ an X800GT. I think..been a long time since i meddled with it. No gaming? xf86-video-ati would suit you best i would think.

Similar Messages

General question about drivers.

What are the opinion about new drivers coming out from the hw vendor.
Do you update your driver package each time a new driver comes out for the hw model, or do you update your driver packages when experiencing problems ?
Thx.
Rgds
Thomas

Well, usually during large projects or migrating, when you have 10-30 models to do, I try to gather entire driver packages from vendors, so every components will be in placed, and I don´t have to download single drivers. I just check, that all devices are
installed. Dell has cabs, HP has driver packages, Lenovo also has somekind of OS deployment utility to gather drivers.
Another way would be to get most newest drivers directly from chipset vendors, like Intel Chipsets, Broadcom Network driver packs and to spread them to any model possible. But you cannot trust automation too much (auto apply drivers).
Lets say, that if you have unlimited time to play around with hardware and drivers, I probably would go perhiperal by perhiperal to select the best possible newer driver for every device possible and put them to its unique driver package, but unfortunately
(or luckly) it isn´t possible because of the timeline.

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Question about download file in OAS4

Question about download file in OAS4:
I use Oracle Application Server 4.0.7 on my Windows NT 4.0 SP6;
I use PL/Sql Cartridge developer a document system; It's use the
upload/download in PL/Sql Cartridge;
I read the document , the Upload/download in Pl/Sql Base on the
Oracle Application Server's Content Service. the Problem is when I
download a document, If I upload a Html or MsWord file, It will store in a LongRaw column, when me download ; It's tell me can't
find a application to open this file; I will select a application
from list to open the download file;
As normal, It will open MsWord Automatic when download a "doc" file ; also It will open a new window of Browser to view a Html file;
I check the download process on client Browser; when download
file, The content-type always return "application/octet-stream";
Also the download File will lost the postfix of the file,
So Browser don't open the File Automatic;
I think If I set the correct Content-Type , Browser can know how open the file; So I use owa_content.set_content_type procedure
set the Doc file to "application/msword" , but the WEb Server always
return "application/octet-stream";
I didn't know how to do this problem, Plese help me.
null

I have a Tecra M2 and rely on your email update to ensure I have the latest drivers on my machine.
When I received a Toshiba support email on 14 April 2005 giving reference to a QFE from Microsoft I assumed it would be necessary for my Tecra.
I was very confused when I found that this QFE and subsequent ones posted on the 16 April 2005 relate to Pre SP2 critical updates no9t required if one has already taken earlier advice of updating to Service Pack, at the very least your narrative should make mention of this. I find it very difficult to believe that your updates are two+ years out of date.

####a question about jdbc driver

A question about jdbc driver: for Oracle JDBC drivers which will not allow O/R
tools to access columns over 4 kb. This affects some of the functionality of my
application.A workaround is to use the my JDBC driver that acts as a wrapper to
ensure that columns over 4 kb read and persist properly. my JDBC driver determines
which actual driver to load based on the connection URL. If you pass in a URL
that contains the string jdbc:oracle:thin, it will know to load oracle.jdbc.driver.OracleDriver.
If the URL contains the string jdbc:db2, it will know to load COM.ibm.db2.jdbc.net.DB2Driver,
and so on.
now i have set CLASSPATH for my jdbc wapper,when I Creating and Configuring a
JDBC Connection Pool,i have to input my driver name such com.lawrence.driver.....then
i did,all
is well,then i restart my WLS,when load config.xml,some errors such as "No registered
driver accept URL:jdbc:oracle:thin:@localhost:1521:lawrence",if i set driver name
is oracle.jdbc.driver.OracleDriver,all is good,no any errors.
I find some questions like:
1.for WLS8.1 ,it is only find some registed driver?
2.why it cannot load my driver wapper when it is loading jdbc Connection Pool,but
when the WLS start is finished, i Creating and Configuring a JDBC Connection Pool
then it is right?

my JDBC driver like this:
public class myDriver implements Driver {
     public static String DB2_DRIVER = "COM.ibm.db2.jdbc.net.DB2Driver";
     public static String DB2_URL = "jdbc:db2:";
     public static String HYPERSONIC_DRIVER = "org.hsqldb.jdbcDriver";
     public static String HYPERSONIC_URL = "jdbc:hsqldb:";
     public static String MYSQL_DRIVER = "com.mysql.jdbc.Driver";
     public static String MYSQL_URL = "jdbc:mysql:";
     public static String ORACLE_DRIVER = "oracle.jdbc.driver.OracleDriver";
     public static String ORACLE_URL = "jdbc:oracle:";
     public static String POSTGRESQL_DRIVER = "org.postgresql.Driver";
     public static String POSTGRESQL_URL = "jdbc:postgresql:";
     public static String SQLSERVER_DRIVER =
          "com.microsoft.jdbc.sqlserver.SQLServerDriver";
     public static String SQLSERVER_URL = "jdbc:microsoft:";
     public boolean acceptsURL(String url) throws SQLException {
          return true;
     public synchronized Connection connect(String url, Properties props)
          throws SQLException {
          if (_driver == null) {
               Class driverClass = null;
               try {
                    if (url.startsWith(DB2_URL)) {
                         driverClass = Class.forName(DB2_DRIVER);
                    else if (url.startsWith(HYPERSONIC_URL)) {
                         driverClass = Class.forName(HYPERSONIC_DRIVER);
                    else if (url.startsWith(MYSQL_URL)) {
                         driverClass = Class.forName(MYSQL_DRIVER);
                    else if (url.startsWith(ORACLE_URL)) {
                         driverClass = Class.forName(ORACLE_DRIVER);
                    else if (url.startsWith(POSTGRESQL_URL)) {
                         driverClass = Class.forName(POSTGRESQL_DRIVER);
                    else if (url.startsWith(SQLSERVER_URL)) {
                         driverClass = Class.forName(SQLSERVER_DRIVER);
                    _driver = (Driver)driverClass.newInstance();
               catch (Exception e) {
                    throw new SQLException(e.getMessage());
          Connection con = _driver.connect(url, props);
          return new myConnection(con);
     public int getMajorVersion() {
          return _driver.getMajorVersion();
     public int getMinorVersion() {
          return _driver.getMinorVersion();
     public DriverPropertyInfo[] getPropertyInfo(String url, Properties props)
          throws SQLException {
          return _driver.getPropertyInfo(url, props);
     public boolean jdbcCompliant() {
          return _driver.jdbcCompliant();
     private Driver _driver;

Some question about communicating the usb RAW device

I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data                       Info           Time   Cmd.Phase.Ofs
15 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc        56.1.0
14 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR   11us        57.1.0
14 USTS   00 00 01 c0                canceled       2.0sc        57.2.0
15 USTS   00 00 01 c0                canceled         5us        56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!

逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time   Cmd.Phase.Ofs     ---
----- ------------------ 15
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0        14
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR   11us
57.1.0        14
USTS   00 00 01
c0
canceled
2.0sc
57.2.0        15
USTS   00 00 01
c0
canceled
5us        56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Quick (and urgent) Question about Intel G5's

Just a quick question about the new intel G5's.
I currently have bunch of software for my PPC G5 which is a Dual 2ghz. Software includes Adobe CS2, Macromedia Studio, Quark 6, etc, etc.
If I purchase the new intel mac, would I be able to use the same software? or would I be forced to purchase a whole new set of everything I currently have?
If the software will work on the intel G5, would it perform at the same rate/better than how it performs now on my PPC g5?
Thanks in advance for any help.

Rosetta:
Most of the time you get a real 'hit' when a program first opens that is PPC. Very sluggish. They will require and use more memory than otherwise, too.
Tests from last August aren't as helpful, there have been improvements, letting the Mac Pro pull even further ahead.
http://www.barefeats.com/quad06.html
Comparison Mac Models shows scores of all models. So there is 2x as much or more processing power, bandwidth, better video, as well as disk drives. A 'base' configuration would be 4-6GB RAM.
And there are differences, more than between G4 and G5.
People with experience would be Mac Pro Discussions
Don't use Migration Assistant, and upgrade to CS3 etc. reinstall all your applications fresh.
There are some drivers and plug-ins, that can be problems, and known.
Mac Pro 2GHz 4GB 10K Raptor RAID Cinema HD Mac OS X (10.4.9) WD RE RAID Aaxeon FW800 PCIe MDD-G4 APC RS1500 Vista

Audigy 2 ZS: questions about TAD connect

The drivers for my motherboard?s onboard sound were causing problems, so I replaced the onboard sound with an Audigy 2 ZS card. It is fantastic! I am not having any problems, but there are some questions about its use the answers to which I have not been able to glean from the manual or the online knowledge base. Since my questions involve three different issues, I am making three different posts. I hope this doesn?t violate some kind of posting rule. If it does, I apologize. I certainly will appreciate any help anyone can give me.
I have a USR 2976 voice modem in a PCI slot next to my new Audigy 2 ZS card. The 2976 modem is very common; but since it is OEM, US Robotics? support consists essentially of acknowledging its existence. I would like to make a TAD connection between the sound card and modem in order to use the sound card in a speakerphone setup. The modem has only one side connector and it looks identical to the TAD connector on my Audigy 2ZS, but I don?t know its pinouts. (I found the Audigy card?s TAD pinouts online.) Since my optical dri'ves use digital audio extraction, I don?t need the CD audio cable that went from one optical dri've to the motherboard?s CD sound in connector; and I disconnected it. The CD audio cable fits only one way into both the sound card TAD connector and the modem?s similar 4-pin connector. Would I be safe in connecting the modem and sound card together using the CD audio cable even though I don?t know the modem?s pinouts for its connector? Are most modems consistent in this?
The CD cable is fairly long. I would need only a very sort cable to connect the two adjacent cards, but I have not been able to find a short one. Does anyone know a source or if there is a specific name for a short cable for this purpose? (I have had no luck googling ?TAD cable?.)

BigBen,
I'll answer your questions here point by point (for clarity).
) No, that won't be possible. A line input is only stereo, so all you'll receive signal-wise is just a stereo stream. You'll need a coaxial or optical input to get that signal to the card (only available on the Platinum dri'ves).
2) In theory that could work, yes, the connections are there. That isn't something we would have tested (or support), though.
Cat

Some question about Toshiab reocvery disk for Satellite P300-133

Hello guys ,
I got some questions about unpleasant recovery surprises :
*1)* I just made recovery DVD using Toshiba Recovery Disk Creator and it initially asked for 2 DVDs - but when the first one was done it didn`t require a second blanc DVD . Is it possible all system files of Windows Vista to be written on 1 DVD ?
*2)* Could I reinstall Windows Vista using the HDD Recovery option ( by pressing F8 ) without using recovery DVD ?
*3)* Which HDD partitions`ll be formatted ( just system C: or both C: and E: ) using HDD recovery ?
*4)* What is recovery DVD - Image of the hard drives or Vista installation files ?
Its pretty bad idea not to include OS on DVD when I have paid for it.
Thanks for all the problems to Toshiba :(

1. I think the recovery disk creator means 2 CDs. I have a Portege M700 with Windows Vista and one DVD too. I recovered it and after this I have a clean Vista installation with all drivers and tools from Toshiba. Nothing is missing.
2. Yes, you can reinstall Vista using the HDD Recovery option when you press F8 at startup. You dont need the recovery DVD but you should create one when your HDD get some errors or something else. If you need a new Recovery DVD, you have pay for one.
3. The complete HDD and partitions will be formatted, so backup your data first on a DVD, external HDD, USB stick or something else.
After the reinstallation you have the factory settings.
4. The recovery DVD is an image of the HDD about the factory settings. If you make a recovery, there are all drivers and tools already installed. Of course on the disk are the installations files of Vista, but you can only use this DVD on your Satellite P300. The disk can not be used on an other Satellite or on a PC.
When you have more questions, have a look in the user manual. There are a many in formations about the recovery. Its in chapter 3.

Questions about Nvidia Optimus

Hello guys,
I've planned to buy a new laptop and I'm hesitating between the Toshiba R830-118 ( i5-2410M, Intel HD 3000 ) and the Asus U36SD ( i5-2410M, GeForce GT520M 1GB GDDR3 with Optimus ).
My question about Optimus would be : is it possible to fully disable the discrete card to be sure that only the intel hd is used, in order to save the battery, which is a big thing for me ? Because I assume that on the Asus, the integrated card must be an Intel HD 3000, and so I would prefer to buy the Asus and only use the integrated card.
Also, if there is any user of Bumblebee around there, as far as I've understood, I would need to use the proprietary drivers from nvidia ? Is your battery time still ok with this solution ?
Please excuse my poor English!
Thanks,
r'm
Last edited by remeh (2011-08-18 09:02:08)

remeh wrote:If I disable the discrete card, will I be able to use the HDMI output ?
From what I know HDMI tends to be wired to the nvidia card on these machines. So I guess the answer is "no". No idea if HDMI works at all. Check http://linux-hybrid-graphics.blogspot.com/ maybe you'll find relevant info there.
If I were you, I'd get an Asus machine where you can turn Optimus off and switch between graphic cards. It's not only Asus that makes such machines, but with other manufacturers it's rare that they have this, while Asus has many such machines. Check that link, you'll find somewhere a list of such laptops.
A fun fact - when I was at the media store last week, only the Asus machine didn't have an Optimus sticker on it, despite also having nvidia graphics. It was a cool machine too (i5 Sandy Bridge processor, Geforce 540M I think), and cheap.

[Zen Micro]Questions about the Firmw

Hello,
I have some questions about the firmware of the Zen Micro
. Can I use the Zen Micro without any Software (MediaSource?) on my PC (winXP) when im using the Firmware Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 ? This means that i copy my Music only by drag&drop from the Explorer after my Computer has detected the Zen Micro as a Removable Disk!
2. I know that the Zen Micro has two parts with the Normal Firmware. The "Removable Disk" Part and the "Playable" Part which can only used by the Software! But what happens if my . question is right. How can i seperate this two parts?
Thanks for answers

I don't have the 2.x firmware, but I think I'm correct in saying this :
with the 2.x firmware, your Micro becomes an MTP compatible device, which can be recognized on PCs having an MTP compatible OS (operating system). For the moment, the only OS that fits the bill to my knowledge, is Win XP with Windows Media Player 0. In this combination of MTP device + MTP OS, you don't need to install other drivers, and you can do drag and drop
BUT ! The 2.x firmware doesn't make your device a "removable disc" in the traditional sense of the word. It doesn't become a file system, like a USB memory stick.
I hope I was clear enough to see the difference :-)Message Edited by fred_be9300 on 04-03-2005 02:52 AM

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Question about drivers

Similar Messages

Maybe you are looking for