Question about DVD to iPod transfer

Hello,
I used these programs and these steps....
http://www.videora.com/en-us/Converter/guides.html#1000
to rip a DVD and then start to convert it. I am using the Videora Converter and it says the job is 100 percent done.
However, it hasn't saved the DVD into the output section yet and the thing such as filesize and frame and processed etc... are still going up.
Is something wrong? Or is this normal and I should just let it go until it stops?

That's probably information you should look for on the Videora site, rather than here. I'm not too sure myself, and I have used this software before. I don't remember anything like that happening, but bear in mind, you are dealing with a fairly decent sized file, and sometimes things seem to take longer than they should. If it feels like an unreasonable amount of time, try running the conversion again, from the original rip... or seeing if you can find any info on the Videora site.
CG

Similar Messages

Question about using multiple iPods on the same PC

I've read the FAQs on this subject but I still have a couple of questions about multiple users with separate iPods using the same PC.
I want to use my family's desktop (A new Gateway with Vista, if it matters) for my new iPod Classic, but my father already has an iTunes account on there for his iPod. I know I can create a new user account on the PC and move iTunes to a shared folder so that we can share music, but will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases and then move new songs into my separate iTunes account via the shared folder? Will it be its own separate iTunes account (separate user name, separate credit card used, etc.) or will it just be a second library that's dependant on the first?
I want to be able to have my own iTunes account, make my own purchases in it, and maybe occasionally share tv shows or something with my father.
If this can't be done, would I be better off just creating new playlists for our two iPods from the same library, or creating a second library on my Father's account?
Also, if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
I hope that made sense.
Sorry if these seem like silly questions. This will be my first iPod as I'm really excited about the 160gig and want to know if these things are possible.
Thanks in advance for any help

Hi, Wes.
Congratulations on your new iPod Classic and Welcome to the Apple Discussions.
For no particular reason, let's answer your last question first ...
... if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
The iTunes Store operates on a one download per purchase policy so you will have to copy the purchases from one computer to the other and make sure that you authorize the laptop to play the songs.
As to your first question ...
... will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases ...
Whatever XP User Account you are logged in to doesn't really matter. What's important is which Apple Account you sign in to ... yours or your Dad's or - if you had my Apple ID and password - The Mimico Kid's for that matter. You can sign in to any Apple Account on any XP User Account. Or any computer for that matter.
Where the XP User Account comes into play is that it will determine where on your computer the purchases are downloaded. Files will be sent to the iTunes Music folder as specified in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab. Default settings will have a different location for each User Account - C:\Documents and Settings\ user name \My Documents\My Music\iTunes - but if you've read this article in the Apple Knowledge Base, you will know you can change the location of the iTunes Music folder in each XP Account to a common location such as C:\Documents and Settings\All Users\Documents\My Music\iTunes.
Post back if all this hasn't been as clear as mud and you need anything clarified.

Question about the 5g ipod

I was thinking about getting the new ipod and wondered whether i could put DVDs that i already have onto it..like, download them.. if anyone knows, please inform me.. thanks

Taylor, welcome to discussions.
Please use the search bar towards the top part of your screen in Apple Discussions.
This topic has been covered in great detail and there's 100's of posts which will answer your question whether you are a Mac user, or a Windows user.

Really easy question about DVDs

I am about to get a new 5g iPod, and I am excited about being able to watch videos on it. But I have a quick question, is it possible to rip DVDs(like you can with CDs) from iTunes?
Thanks

This article addresses your question:
http://docs.info.apple.com/article.html?artnum=302758

Question about syncing multiple ipods to one iTunes library

I have an iPod touch (2nd gen Ver 3.1.3) that I sync to my computer. My daughter recently got an iPod touch (2nd gen Ver 4.0) that was under her father's account. I reset her iPod in order to put it under my iTunes store account. Next I synced her iPod with my computer adding only the items she wanted (games mostly and a few songs).
iTunes didn't seem to have a problem with our devices being different versions. So far so good. I have only synced her device once and haven't synced mine since. We have both purchased apps straight to our iPods and they aren't backed up.
My questions are:
1. Before syncing, will I have to go check everything I want every time in iTunes?
2. We use some of the same apps and games. Will the game data and/or app data be written by another players data? Can you tell I'm really just concerned about my TapFish score?
I'm holding off on syncing until I know the answers.

Nerdgirl98 wrote:
1. Before syncing, will I have to go check everything I want every time in iTunes?
well, it would be better to keep everything checked in your library and instead create separate playlists for each mobile device.
click here for more information.
2. We use some of the same apps and games. Will the game data and/or app data be written by another players data? Can you tell I'm really just concerned about my TapFish score?
you can use as many mobile devices as you want with a single iTunes library. iTunes treats each device separately.
i have two Nano's, an iPod Touch, and an iPad syncing with the same library.
JGG

I Have a Question About My Apple iPod Touch 64GB 5th Generation

ok I Do have a 5th Generation Apple iPod Touch 64GB & I Need Help or just needed to ask a Question ok, when I Turn on My Apple iPod Touch 64GB or when I Turn on The iBlason iPod Touch Battery Charger I Have on it to Turn on The Apple iPod Touch 64GB Well when I 1st Turn it on it's Taking 1 or 2 Secounds Longer to Turn on & I Wanted to know if that Normal??? or is it mean that My Apple iPod Touch 64GB is going to Die??? that was a Question i needed to ask
also a Few Day's ago when I Wanted to Turn on My Apple iPod Touch 64GB it did not even want to Turn on or do anything & I Never Shut it Down or Turned it off???
I Was reading on the internet about this problem & it said that I Had to Restart My Apple iPod Touch 64GB & I Did & Everything went back on again so just needed to get info about this problem if anyone knows about this???

Things like that happen and is normal.
If you can't turn it on:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Question about DVD quality from iDVD.....

I've just created my first DVD using iDVD (7.0.4), and I'm not happy with the quality of the photos. They look great in Aperture. They look great in iDVD when I play the project directly on my Mac. The problem is that I burned some DVD's of the project, and when I play the DVD on my Mac (or TV, for that matter) the quality of the photos aren't anywhere near what they are in Aperture or when I play the project directly on the computer. It's useable, but is it normal to have the photo quality fall off pretty noticeably when burning it to a DVD?
(FYI - I'm using the DVD burner that's built-in on my iMac, using Sony DVD+R DVD's, and I don't see any "quality" settings that I'd be able to change before burning.)
ANy help would be greatly appreciated, as - after burning about 20 DVD's - I'm unhappy enough with the quality that I don't even feel like giving them out now.)
Thanks,
Tim

Ah - That makes sense. Thanks.
As I said, I've never done anything with iDVD before. In fact, I've never done anything "digital" with photos before. I process them in Aperture, and then make prints and that's it. Which leads me to another question then.....
What I'm trying to do is get the 150 or so photos I've taken of my son's high school baseball games onto some type of media so that I can give one to each of the players. Not knowing anything about the degradation of the photo when turning them into a DVD, I put together a "project" in iDVD where I split the photos into two groups, added two songs, and made a presentation out of it. It sounds like if I want to do something like that Blue-Ray would be the only option to maintain the quality of the photos?
If that's the case, are there any other options? Can I just drag the photos onto a CD, or does a CD compress the photos as well? As I said, I've got about 150 photos that average between 9 - 13 MB's each. Will they fit onto one or two CD's? (I'm not sure how much a CD will hold.)
Any other options/ideas for getting these photos to the players?
Thanks in advance for any more help anyone could provide.....
Tim

A dumb question about DVD Capacity.

I want to create as high as quality DVD as possible from my iMove (5.02) project using iDVD (5.01). I've started off using DVD+R disks and I'm now considering using Dual Layer DVD's.
The actual iMovie file size of my project is 12Gig at about 60 minutes. It's the same size when I SHARE as a full quality QT file. However when I create an iDVD Project from either the QT file or directly out of iMovie, my DVD Capacity reading is approx. 2.1 of 8Gig.
Now my question is this: What exactly am I reading here? I was under the impression that the DVD Capacity indicated the size of the movie. Obviously a 12Gig movie isn't going to fit onto a DVD, so I assumed that this reading related to the compressed size, but am I wrong? I can't understand why a 12Gig movie would need to be compressed so much. If this is the compressed size, then how can I get iDVD to not compress it so much? I've tried using Best Performance as the encoded setting, but would expect something up in the 6-7Gig range.
If I use a dual layer disk, am I only going to be writing a 2Gig file to it?

Thanks.
But two questions.
My iDVD Capacity status bar reads this file as 2 of 8 Gig. Is it telling me that my imported iMovie will be compressed down to 2Gig, if so then why is it compressing the file down so much, OR if not what exactly is this information telling me? If I should expect a reasonable good compression from a 12Gig movie down to say 6 or 7Gig why isn’t it shown in the iDVD Capacity status bar?
Also, at what point does iDVD work out the compression? I don’t usually insert a blank DVD in until I go to burn the project and iDVD requests one, up until that point how does it know what size disk I’m using 4Gig Single or 8Gig Dual Layer.

I have a question about the new ipod touch

I just got a 32GB ipod touch a week and one day ago and now i hear that a new one with more features is coming out. This is'nt fair since the new one has more features but costs $100 less than when i bought mine. Since i bought it recently is there anyways i can return it and get the new one instead? My ipod is still brand new without any scratches at all since i put a case on it as soon as i took it out of the box.

I purchased a refurbished iPod touch 8g about 10 days ago. I am thinking of sending it back. The question is it really worth the hassle? In Canada the 8g is going to sell for $259. I think I will loose 10% restocking fee plus shipping it back. Thoughts ??
Is it worth it?
Should I just upgrade the software and call it a day? Or get the new one.
Ideas...thoughts...opions???
Tug

Just a few questions about DVD Ripping and Final Cut 6

Ok,
Here is my first major concern. I have a wedding that I cut on the Final Cut Studio. After I burnt it to a DVD, I erased the main footage. However, the groom wanted to add something so I went into my backup files to get the information but just so happens that my backup hard drive crashed and it will not recognize on any Mac. (Tried 3 different Macs including 2 PowerMac G5’S and a Power Mac G4) Anyway all I have no is the DVD. I was wondering if anyone knew any good ripping software that I can rip this DVD back to a QuickTime. I have tried a few programs but the quality is just horrible.
My next question is does anyone know when Final Cut Pro 6 is shipping?

Did you lose your autosave vault with the crash? You could open your autosave and grab the last cut and do a media manager capture so you wouldn't have to re-edit or capture all of the media again.
Also, there are people who can get the info off the drive for a modest fee. If this was a paying gig, consider it part of the cost of having done the project. If the groom was satisfied and the project was complete, I guess you could argue that an extra fee is in order if he wants a different version after the final version was already delivered and agreed upon. Otherwise you kind of owe it to him to do whatever it takes to give him a final output.
Make a backup tape as well next time. That way you can recapture and add, then re-backup and re-compress. Lots of re-ings.

Question about AVCHD & Log and Transfer

I will be recording videos in a remote location for five days next month. The recordings will be about 1.5 hr each, for a total of twenty two separate presentations. If I purchase a hard drive camcorder (Sony HDR-XR550V) for this event, will log & transfer dump the whole lot into FCE or will they be split up so I can select them in proper order.
I would rather use a camcorder that recorded to an external memory card, but twenty two gets very expensive.
David

Yes, to use AVCHD material you should upgrade your FCE to version 4.0.1. This is a free upgrade.
To do this:
The first thing you should do is buy or obtain an external hard disk of equal or greater size to the system disk you have now inside your computer and make a +clone copy+ of your system disk. This is to protect you if something should go wrong during the upgrade, or if your internal hard disk should ever fail, you will have a fully functioning copy of your hard disk to use to restore your work.
You can get Carbon Copy Cloner, a shareware software that is almost an industry standard, here:
http://www.bombich.com/
After you have made a clone of your system hard drive, (which may take several hours the first time you do it), then go to the Apple menu in the upper left corner of your screen and select Software Update.
This will look at all the Apple software that is on your computer and find any software that needs updating.
You will be presented by a list of all the software on your computer that can be updated, you should see Final Cut Express somewhere in that list.
If you do not see it, have you moved the application from where it was originally installed, or renamed it? It needs to be in it's original location in the application folder, with it's original name for Software Update to work.
You can deselect any software you don't want updated from the list, then start the software updater.
You may need to restart your machine to complete the installation.
I would expect no difficulties from upgrading your software, but you have your cloned backup just in case. Once you have made a clone back up, get in the habit of re-cloning your drive every other day or so to protect your work. After the initial cloning, the cloning will take much less time as it will only make the changes you have made to your system disk on your clone - not recopy the whole thing as it did the first time.
Hope this helps.
MtD

Really basic questions about dvd

I have figured out that if I slide a DVD into the slot on the right side of my iMAC, then after a pause an application called "DVD Player" will open and the DVD will play. I have also discovered that to get the disk OUT I can find an image of it on the desktop and drag it to the trash which changes to show an upward pointing arrow. Or I can right click on the icon and select "Eject".
Where do I go to get answers to the following questions:
Are there other choices for the application that plays my DVD?
Can ITunes play this DVD?

1. Only if you've installed any(or Apple's MPEG-2 playback component for unprotected DVDs).
2. No, not even if the playback component is installed. That codec enables the QuickTime Player and similar applications to play unprotected DVDs.
(60720)

I have a few questions about 5th gen ipod

My iPod has a very sluggish transfer rate for my music and I wanna connect it with the firewire cable I got with my old mini. When I do I get a message saying it's not supported on the ipod. Does anyone know if that is just me or if there is a firmware update.
Also I have both a iMac G4 flat panel and a Dell Inspiron 5100 laptop. I've had some video problems with my iMac(as you might have seen) and I am thinking of selling it on ebay, does anyone know how I can transfer the music from the mac to the windows laptop without networking or installing the ipod on the windows and transferring through that?
Help is greatly appreciated. Thanks!
Linda
iMac G4 17 inch screen Mac OS X (10.3.9) iPod Video black, iPod Mini grey, Dell Inspiron 5100 laptop/ Windows XP SP2

When I do I get a message saying it's not supported on the ipod. Does anyone know if that is just me or if there is a firmware update.
The 5th Gen iPods do not support Firewire for data transfer. You can only charge via Firewire. This is not a firmware issue. There's no firewire controller in the 5th Gen iPod.
does anyone know how I can transfer the music from the mac to the windows laptop without networking or installing the ipod on the windows and transferring through that?
Your iMac probably has a CD-RW drive. If so, just burn the tracks as a Data/MP3 CD, and then import that CD into your iTunes library on the Windows machine. You can fit hundreds of tracks on a DATA/MP3 CD.

A quick and easy question about my NEW Ipod Touch.

Okay, I broke down and replaced my old ipod. This new one came with earphones, a cord to connect it to my computer and a little plastic piece that obviously fits on one end of the ipod. Here's my question: WHAT IS IT FOR?
Thanks in advance!
Annie

It's a dock adaptor. There are some devices (eg. speaker systems) which have a slot that fits the 30-pin dock connector for iPods, but the slot is the same size as the iPod Classic, as it is the largest iPod that is compatible with such systems. The dock adaptor that came with your iPod is supposed to fit around the base of your iPod and prevent it from being bent forwards or backwards, as this can damage or even break the dock connector.

Switcher has question about DVD Label Printing

I recently switched from Windows to Mac Mini. I really have enjoyed the Mac experience. One thing I haven't found though is a way to print DVD labels via a Mac application or via Mac Office. Is there a way or must I get a third party app?

I use Discus. It is cheap (about $40), downloadable, and support just about every label printer and paper label available.
See it here:
http://www.magicmouse.com/hdiscusdetail.html
I advise against using paper labels on DVDs. Many have done it successfully, but there are enough horror stories, including destroyed DVD players (label comes loose, gums up the inside) to concern me. I've used the EZ CD Printer (an Epson C60 conversion), and the Epson R300, as well as the CD.DVD duplicator I use now, the Primera Bravo which works perfectly. I've made about 300 DVDs with that.
Ed

Question about DVD to iPod transfer

Similar Messages

Maybe you are looking for