Question about Energy Menagenment settings

I cannot change any energy settings. When i try to run : Power Settings (opcje zasilania) it says: that i must close the power setting program from ms windows xp, and run power saver from toshiba. But.... when i try to run the power saver from toshiba it didnt turn on. What can i do to repair that cuz i realy need notebook to work more than 30m on battery.

Hi
I completely agree with Nicky. If the Toshiba power saver is installed on the unit so you cannot change any settings in the Windows own power options.
The fact is that Toshiba power saver controls the power and battery options. There you can change the different power modes
If the power saver doesnt run correctly or its not possible to open this application so you should reinstall this program.
Try firstly to remove it form ADD & remove programs and after new reboot try to install it again.
I dont know how long you use the battery but if after the new configuration the unit doesnt run more then 30min with battery so I assume the battery performance goes to the end.
PS: The battery working time depends from the notebook usage.

Similar Messages

  • Question about IDT and settings

    Hello, it's me again. 
    My notebook is dv6-6c53er with two earphones outs and one microphone. So, I want to ask you a question. Can I set my earphones outs for different tasks or can I set them as independed outs. My English isn't so good, but that isn't so good, when i'm listening my music and when i get a message in skype - my music in earphones out is lost, but I hear Skype (soung of message), and music is playing on beats speakers, and past 2 seconds - again (in earphones - music, on speakers - nothing).
    So, the problems are: 
    1) How I can set settings for each earphone out (to do it independed or to play different sounds)?
    2) What Can I do with problem with Skype and outs?
    3) Help me, please with settings in Traktor, because at Native Instruments forum I didn't receive resolve of my problem...
    And problem with Traktor is:
    I can't to set each earphone out for playing each deck in Traktor.
    Help me, please with this problems!
    Yours, Xardas007

    I'm really need help!

  • Question about default wallpaper settings on new iPhone

    The default wallpaper for the iPhone 3GS is planet Earth. I was wondering if the option for "camera roll" (to use as wallpaper) is there by default...or is it added there after you take your first photo or only after you use a photo as wallpaper the first time.
    Strange question, I know.
    Thanks

    Page 142 of the user manual:
    Wallpaper
    You see a wallpaper background picture when you unlock iPhone. You can select one of the images that came with iPhone, or use a photo you’ve synced to iPhone from your computer.
    Set wallpaper: Choose Wallpaper and choose a picture.
    Settings>Wallpaper

  • Qosmio G40-10Z: Question about energy use in sleepmode

    When I turn my new Qosmio G40-10Z in sleeping mode, with full battery (and off the AC power), I can't start the computer next day. I can only start it up after connecting it to AC power. I get a message windows Vista wasn't closed properly and I am asked to start in normal way or safe mode.
    After starting the battery indicates only 2% power. So, what is using power in sleeping mode? Why isn't the sleep mode not transferred to hibernation state when the battery is almost empty?
    (New notebook, only vista and office installed and only television antenna is connected)

    Hello guys
    At first I just want to write a little bit about theory. Microsoft has implemented standby/Hibernation mode to offer PC users comfortable OS usage and make switch ON/OFF time much shorter.
    According to the definition standby mode should be used for short time (launch, meeting and if you must leave the notebook for few hours). Hibernation mode should be used if you leave the notebook over the night or maybe day or two. In standby mode all data will be written in RAM and to keep them notebook needs power. In Hibernation mode all data will be saved on to HDD and notebook can be switched OFF. In hibernation mode the notebook does not need permanent power supply.
    For me it is really strange that you use standby mode with battery and almost 20 hours. With this I do not want to say that described battery issue is normal but for 20 hours it is logic to use hibernation mode.
    Back to battery issue: only 20 hours under standby mode is really to short. I have tested it with my Tecra and after 5 days I was able to switch ON notebook as usual (only battery power supply.
    In your case I see only two explanations:
    1. Somehow notebook can not switch into standby mode properly and stays running (I do not believe this because you can see if something like this happen)
    2. The battery is defective
    What you should do is to contact Authorized service partner in your country. Make a call and explain the situation. Maybe you will get new battery or they should test it using your battery.
    Sorry for this long posting. I wish you luck and hope you will clarify this issue very soon.
    Bye and good luck!

  • Question about Camera/Premiere Settings for Slow Motion Video

    I'm new to shooting video with cameras that have manual options, so I'm not exactly sure how I should set up the camera settings. It's a Canon 60D. Basically in the video I want to make, I'd like to have a lot of normal speed to slow motion transitions. Some of the video footage will be very fast paced, so I'd like to slow it down as much as possible without making the video appear jumpy. I assume I should change the frame rate on the camera to 60 fps. Is there anything else I should adjust within the settings?
    I will be editing with premiere elements if you know of any additional tips for that.
    Thank you in advance!

    The speed of your camcorder doesn't matter. You can apply Time Stretch to any video clip.
    There's a limit to how much  you can slow it, of course. With that camera and Premiere Elements, you're not going to be able to slow down a water spray so you an see the individual droplets or anything like that. But, if you combine TimeStretch and Frame Blend, you should get very good results slowing your footage down a certain amount.
    How much you can slow it and still be satisfied with the results is kind of a judgment call. So I encourage you to experiment and see what your tolerance is.

  • Quick question about Auto-lock settings

    Hello all,
    I recently was able to sync my office email account to my iPhone using Microsoft Exchance active sync. The problem as I understand from searching through different posts, is that I can no longer set my Auto-lock setting to "Never" because of this, only 5 minutes (sort of a security thing as far as I can tell).
    The reason I am trying to do this is that I like to use one or two of the GPS golf apps out there, and they stay dialed in if the phone doesn't "sleep" while I am playing a round, so I would like to keep it on the entire time.
    Does anyone have any ideas of how I might be able to work around this issue in any way?
    Responses are, as always, much appreciated!
    Cheers,
    Kev

    More than likely, you could not simply delete the account. The thing is that the people who came up with the security protocols already thought of that. As an employee using a company cell phone, I could delete my account, access features or information my company restricts and then readd the account, thus bypassing security protocols.
    In addition, I might have other sensitive company information (in the form of contacts, documents, notes, etc) that would still be on the phone even if I delete my exchange account. Without autolock, people would still have access to this data even if I delete the account.
    To prevent this type of abuse, when an exchange account is added, it installs a set of restrictions and protocols to the phone. Those protocols can, at the discretion of IT, be non alterable and non removable, even when the exchange account is deleted. This prevents people from abusing the loophole you are describing.
    Similarly, simply switching to another email account will not bypass them - these protocols are now part of how your phone acts and can not be changed without wiping it back to factory settings.

  • Newbie photographer, question about in-camera settings and RAW

    I have a Nikon D200, and I can make a wealth of in-camera settings that would greatly mitigate the amount of post-production processing that I would have to do. Nikon's own RAW Capture NX software reads these settings. I'm assuming that Aperture doesn't read (most) of them (with, perhaps, the exception of White Balance, and maybe Hue). Is there a reference somewhere of what in-camera settings are preserved by Aperture on a RAW import?
    Thanks in advance,
    Mark Taber

    It's a pretty safe assumption that no raw editor except the OEM version will remember the in-camera settings, aside from white balance.
    Why's that? Because those settings don't really do anything anyway - they are just advance instructions for the converter.

  • Simple Question about my display settings

    I have a Mac OS - Version 10.4.11
    I accidently hit some button on my keyboard and it "inverted" the colors on my display. It's kind of hard to describe, but the clarity on the colors on the display look horrible. It's as if it's limited to the basic 8 colors.
    I've tried everything I can think of - display settings, color calibration...... and I just can't figure it out.
    Does anyone know how to restore the display to the original settings?

    Press the Option, Command, Control, and 8 keys simultaneously, or turn it off from the Seeing tab of the Universal Access pane of System Preferences.
    (30342)

  • Getting Started with CFBuilder - A Question About Project Settings

    Hello All,
    I'm just getting my feet wet with CFBuilder and giving it a spin after over a decade's worth of experience with Dreamweaver and I have a question about setting up my work environment.
    First of all, I have two computers that I mainly work from.  My home desktop computer, and a laptop for when I'm on the road.  I keep all of my web site project files syncronized between the two computers using Dropbox.
    I've noticed that when I create a new project in CFBuilder it stores a few files in my project root like ".project" and "settings.xml".  It looks like "settings.xml" stores information about which CFBuilder web server should be used for the project.  Unfortunately this messes things up for me a bit because on my desktop a web site project url might be:  http://desktop/myProject/ and on my laptop the project url could be http://laptop/myProject.
    The reason this isn't a problem in Dreamweaver is because dreamwevaer stores its configuration/preferences outside of my project folders so I can essentially define any testing server I want for both the desktop and laptop.
    Is there a way to configure CFBuilder to store project settings outside of the project folder?  Or does anyone have a suggestion for someone like me who syncronizes their project files from their laptop to their desktop?
    Thanks in advance for helping out a CFBuilder noob.

    I would recommend using a distributed version control system (DVCS) with a hosted service, such as using Git/Mercurial and Github/BitBucket/UnFuddle.  With Git, you can use a .ignore file to specify files/folders that you want to exclude from being stored in version control (I also exclude my CFBuilder project files from my repositories).  You would then sync your local Git repositories with your service of choice, and they would be accessible from any machine. 
    There are many advantages of using Git and a hosted service over just Dropbox:
    Each computer has a complete copy of the code repository, including all code changes over the history of your project.
    You store code modifications in "commits", or small entries in the DVCS.
    Commits can contain user-defined descriptions that help you identify what you did at each step of your development process
    You can roll back commits if you break something in your code.
    You can create "branches" of your code when you want to work on a specific feature of your application, and that branch is kept in isolation from other branches until you are ready to merge it back into the main production code branch.
    You can have public or private hosted repositories on the various services, enabling you to work with a team or participate in open-source development.
    There are Eclipse plugins available for CFBuilder that provide GUI tools for working with Git and hosted repositories (unless you are comfortable with using the command-line to do all your Git interactions).
    I don't think you can separate the project settings from the project in CFBuilder.

  • A question about the option Reset All Settings

    Hello, I have a question about the reset all settings function in the IPad. I need to keep all of the installed applications on the device yet I need to remove any log in information and contacts. Is this the correct option or would the Erase All Content and Settings be what I want?

    If you read the OP's request, they "need to keep all of the installed applications on the device".  Selecting "Erase All Content and Settings" will do just that, erase everything.
    Faroff, you can remove accounts in Settings/ Mail, Contacts, Calendar ... that would remove contacts only if the contacts were synced to such an account.  If contacts were synced from iTunes, you'd have to un-sync them from iTunes by changing the sync settings.  If the contacts were just manually entered and not synced with anything, you have to delete them one by one.  However, iOS will remember past usage of a contact, so even if you remove them they may be recalled by you initiating an email or iMessage to something close to what used to be in the Contacts app.  The only way to clear that I think is to do a full erase of the iPad.
    As for log-in information, go to Settings/ Safari/ Passwords & Autofill, where you can erase passwords and saved credit card info.  You can also clear cookies and data in this menu.
    You might be better off doing a full erase of the iPad.  Why do you not want to remove the apps?  You can re-sync them from iTunes or re-download them if necessary.  Or did you inherit this device from someone else and you're wanting to keep their apps installed but remove their private information?

  • Re: Satellite L350-170 - Question about webcam settings and microphone

    HI,
    I would like to know the webcam resolution of my laptop as it shows preety bad out put. Also where is the inbuilt mic locates? I would also like to know about screen brightness settings. How can I register my laptop? kindly help
    Since this is my secondhand computer, is there any software which can detect the settings and confirm everything? My product details are as below.
    Back to support homepage
    Switch models Satellite L350-170 Part Number : PSLD8E-00D008EN Key Features - Intel Pentium Dual-Core Processor
    - Genuine Windows Vista Home Premium Edition (pre-installed, Toshiba-HDD recovery)
    - DVD-RW SuperMulti drive (Double Layer)
    - 2048 MB (1024+ 1024) DDR RAM (800MHz)
    - 17" Widescreen TruBrite XGA (1440 x 900) High Brightness display
    please help.

    Hi shahchin,
    I think you should check this Toshiba document:
    [How to change the settings for the integrated webcam if the image is very dark or black |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]
    Furthermore the microphone is located on near the microphone because its a part of the webcam.
    Regarding the picture quality of webcam you could also try reinstalling the webcam driver from Toshiba website.

  • A Few Basic Questions About Random Shut Downs (RSD)

    i think my month and a half old macbook has "RSD", its a white 13 inch which i bought refurbrished, Iv got a few questions about RSD and apple serice
    First, is there any way to avaoid rsd or is it soemthing you really have no influence over?
    secondly, if i send it in to get serviced, how long might it take (it has to ship from new england if that means anything)?
    has anyone got theres serviced recently and still had problems?
    Also will the RSD get worse, should i send it in sooner rather than later (right now i can deal with it, though if it does get worse itd be a pain)
    and last should i expect to lose everything on the harddrive ifg i send it in?

    First, is there any way to avaoid rsd or is it
    soemthing you really have no influence over?
    You can't avoid it. You can temporarily reduce it by:
    1. Holding down the power button at startup until it beeps.
    2. Setting your energy saver settings so it doesn't sleep.
    But over time, even those strategies will fail to help.
    secondly, if i send it in to get serviced, how long
    might it take (it has to ship from new england if
    that means anything)?
    I took mine to the Apple Store last Wednesday and it was overnighted to the repair center. It was delivered back to me the this Wednesday. So it took one week in my case. I know there are folks that sent theirs in before I did that had to wait longer, but I think that's because there was a parts shortage.
    has anyone got theres serviced recently and still had
    problems?
    The first time I sent mine in it worked fine for three weeks and then the RSD returned, but that was because Apple really didn't know at the time what the problem was. By the time I sent it in the second time, they had just concluded that a heatsink replacement would fix the problem. Hopefully they were right - only time will tell, since the issue generally seems to take a few weeks or more to occur.
    Also will the RSD get worse, should i send it in
    sooner rather than later (right now i can deal with
    it, though if it does get worse itd be a pain)
    It will get worse over time. If it only happens rarely, they might not be able to replicate the problem if you take it in for service right away. (The first time I took it to the Apple Store they couldn't get it to shut down. By the time I took it in the second time, it was predictable enough that I knew it would shut done right after they turned it on - then they sent it in for service.) If it happens fairly regularly (like every time you start it after its been sitting for awhile, or any time you wake it from sleep), then definitely take it in. Supposedly they really do know how to fix it now.
    and last should i expect to lose everything on the
    harddrive ifg i send it in?
    Both times that I got mine back all of my data was intact. However, it is always good practice to do a full backup before you send it in -- just in case.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

  • Just installed iOS6, questions about "iMessage" and other things...

    I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
    First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
    In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
    Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
    I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
    Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
    Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
    Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
    Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
    Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
    Finally, what is the Notification Center used for?
    If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
    There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

    Hey Taantumus!
    Here is an article that will provide some guidance on this question:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Some questions about configuration in MAX.

    Hello,everyone!
    I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
    I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
    My question as following:
    1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
     If I select stepper,though motor can work but I can't test encoder in MAX.
    2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
    3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
     My English is poor,Pls pardon me!I come from China.
    Thank you for your help!
    EnquanLi
    Striving is without limit!

    Hi,Jochen,
    Thank you for your kindly help!
    The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
    And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
    Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
    1,Motor can't run.
    2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
    Except for the  two points mentioned above,"Following Error" is  occured frequently,I don't know why.
    I am still not clear why I must set the motor type be stepper in MAX .
    And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
    I am verry sorry I have too many questions!
    I am very appreciate for your kingly help!Thanks again!
    EnquanLi
    China
    Striving is without limit!

Maybe you are looking for