Question about eth0 not showing up in my OEL Linux 6 install on VirtualBox
Hi folks,
I'm using the latest Virtual Box VM software. I've installed O Enterprise Linux 6. This is on m laptop. My laptop uses a wireless network connection. I want to make the wireless network card work in my OEL 6 virtual host when it boots up. In VirtualBox, I've configured the Network to be Bridged and selected the Wireless device. I then click the Advanced and select PCnet-FAST III (Am79C973) for Adapter type.
When I boot up the linux host, I only have an lo network adapter. There is no eth0. I don't have a lot of experience with this so I'm wondering if I am doing something wrong or if this is expected and I have to then setup an eth0 device once the OS is booted.
Any help is greatly appreciated
This seems to be at least your third recent post about working with an OS on Virtualbox.
I suggest you find the forums at the Virtualbox site and ask your question over there.
The users over there will be better prepared to discuss such topics.
There are no forums here at OTN for Virtualbox issues.
Similar Messages
-
Question about Aperture slide shows
Question about Aperture slide shows. How can I eliminate banding in a blue sky when photos are displayed in Aperture Slide shows?
What kind of banding? Do you have a screenshot?
It could be jpg compression related, I think the previews are all jpgs. -
Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?
I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.
-
First of all, let me say that I'm not very 'techie' so if this is a stupid or naive question...please bear with me.
My question is about iPod notes. It says you can only put plain text files in the notes folder, and yet it does not display the note in plain text (I believe the display's font is Helvetica). It also wraps earlier than at 80 characters like a .txt file should.
So basically...the note never looks the same on TextEdit (or whatever) as it does when you view it to your iPod.
I have been making a few eBooks to read on my iPod and -- just to make them look neater -- I would like to do a few things like centering titles, adding dividing lines, etc.
So I was hoping somebody could tell me how to set TextEdit (or whatever) so that a note will look the same on it as it does when viewed on the iPod so that I can edit the file. --Like, what is the exact font and size of the text on the iPod display and where does it wrap exactly (I figure it must wrap according to the size of the window, since a variable number of characters can go on a line w/ non-equal-spaced type).
Also...I figure that the file I edit would have to be a .rtf since the display is not in plain text, yet it says you can only put plain text files in the iPod notes folder. So...I suppose I would have to convert the file from .rtf to .txt before putting it into my notes folder...or can you put rtf. files in there after all?
Anyways...any help anybody out there can give me with this will be greatly appreciated. Thanks very much!It says you can only put plain text files in the notes folder, and yet it does not display the note in plain text (I believe the display's font is Helvetica).
Plain text means it does not have any special coding/characters in it such as Bold or Underscores or page breaks.
Plain text docs do not store anything except text. It does not specify a font. That is taken care of by whatever app you are using.
I suppose I would have to convert the file from .rtf to .txt before putting it into my notes folder...or can you put rtf. files in there after all?
You can put rtf in the Notes folder but the iPod will ignore any of the formatting.
You can use some html to format a bit as well as linking to other files/songs/photos.
Go here -> Guided by iPod and click on *iPod Notes Feature Guide* at teh bottom for a doc explaining the notes.
There are a few apps and web pages to put text docs into the correct size files.
Here's one -> http://www.ipod-notes.com/ (I haven't used it so no idea if it's any good or not). -
Another Question about the "Notes" Folder from Kevin_Ahab
Okay, thanks to [I forget my helper last time], for his help getting my TEXT (you can not use non-Microsoft Word Documents) Documents to the "Notes" Folder in the Extras Menu of my iPod Nano White 4GB English.
Is there a limit to the size of the notes? My documents were ~8 KILObytes each, and the whole did not show up. If there is some sort of limit, tell me, or maybe I just screwed something up. Because some people have text documents over the 1 megabyte mark (I believe I have some), and if that can not be stored by iPod Nano, that is un-good.
Unless, and tell me if this hunch is correct, it is only for a "to-do" list, not for long, drawn-out documents.
Anyways, any help is GREATLY appreciated, thank-you in advanced.
~Kevin_Ahabyou can not use non-Microsoft Word Documents
You HAVE to use non-Microsoft Word documents.
They cannot be a .DOC file. They must be plain text.
Is there a limit to the size of the notes?
Yes. 4K file size. Anything over will not be displayed.
if that can not be stored by iPod Nano, that is un-good.
It can be stored on the Nano but it cannot be displayed on the Nano. -
In web console Attestation menu item not showing,after OIM 9.1.0.1 install
In web console Attestationmenu item not showing,after OIM 9.1.0.1 installation
Version: 9.1.0.1860.16
Build 1860.16
thanks.Choose option Oracle Identity Manager with Audit and Compliance Module during installation.
INIYA. -
Dynamic Images not showing on BOXIR3 with SP2 (Linux redhat installation)
Hi Guys,
We recently upgraded our BOXI R2 installation to BOXIR3 with SP2 (Linux redhat platform), and we noticed that all our reports icons/logos have just disappeared.
What we are trying to do is just to load an image in an OLE Object, the image is referenced by an URL (that is passed through as a parameter).
We built a very simple testReport.rpt with an OLE Object that has an image URL in it, still it doen't work.
Notes:
1 The CrystalReport 2008 where the simple test report is built shows the icon/iamge correctly. However.
2- CMC and InfoVIew do not show the image.
3- What I just noticed today is that when I go to CMC/folders/folderxyz//testReport.rpt double click go to Default Settings/Thumbnail the image is there (if I tick Show report thumbnail).
Any help would be very appreciated (I am just stack).
Best Regards
Khalef Bessaihmoved to BOE forums
-
my iphone is not showing as a device in itunes so cannot sync i have un-installed and re-installed itunes but still not showing yhis problem has just suddenly happend so dont understand whats wrong i am currently running win 8
Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2 -
Follow up question about image not looking good in canvas-Shane?
I guess this is a follow up question for Shane....
You wrote this in response to someone a year ago which helped me out.
Shane's Stock Answer #49 - Why is the quality different between what I see in the Viewer and what I see in the Canvas?
Well... the viewer is just that-- a viewer. It will display anything that fcp will recognize as usable video or graphics. The canvas is a viewer too, but at the pixel dimension specified by the settings of your project and sequence.
For example, if your graphic or footage is much higher resolution than your 720x480 DV sequence, FCP is interpolating down your file to fit the settings of the sequence. Usually this makes it look not so hot. DV is a 5:1 compression working with a 4:1:1 color depth. Your pristine picture images and graphics are being crushed.
Same with picture files. HIgh res pics now adopt the sequence settings and will render to those specs, and most likely they are not as high quality.
So, based on your answer, I made an HDV sequence, dropped my DVCPro50-NTSC footage and my tiffs into the sequence and now the stills look great. Is this an okay workaround or do you have another suggestion? I'm worried about this HD sequence taking too long to make a compressed QT from in the end.
Thanks!Photo JPEG is a good option. But this all depends on what your final output will be. If you are going to make a DVD, then that is SD, so using an HD sequence setting makes no sense. Photo JPEG is good, but not realtime in FCP. DV50 or ProRes NTSC are good options.
Unless you are making an HD master...in which case ProRes 422 for HD is good -
Question about how not to insert the same row twice
hello everyone
i have two tables
table employee_list
employee_id
employee_name
employee_num
employee_date
and table employee_form
employee_id
employee_name
employee_num
employee_date
table employee_form should contain the exact data like employee_list .
if there are missing data i'm inserting it to table employee_form_miss(missing).
now i have a probelm cause the compair between the two table,take place
more then just one time.now if there are still missing data i don't want that to table employee_form_miss will insert the same data that already exist in this table.
i've been thinking about constraints table employee_form_miss(employee_id
employee_name
employee_num
employee_date).
but i think it will be a wird way to handle this because i will do an insert
and then what rollback? or delete?
please help me how to manage this
thanks in advance.hello everyone
i have two tables
table employee_list
employee_id
employee_name
employee_num
employee_date
and table employee_form
employee_id
employee_name
employee_num
employee_date
i'm using an embedded sql in cobol program
DECLARE AA CURSOR FOR
select a.employee_name ,a.employee_num,a.employee_date
from employee_list a
WHERE a.employee_date = :employee-date
and NOT EXISTS
(select null from employee_form
WHERE employee_name =a.employee_name and
employee_num = a.employee_num and
employee_date = a.employee_date )
i'm doing open and fetch to the cursor.
and loop over the sqlerrd(3) result in order to insert them to the employee_form_miss table
insert into employee_form_miss (employee_name,employee_num,employee_date)
values (:employee-name,:employee-num,:employee-date)
the employee_id in table employee_form_miss there is a trigger which
Increment the sequence by 1 for each row that we insert.
so my question was that if i'm doing a constraint, so still i have to do
an insert and then if there is a constraint to do rollback or delete
from duplicate row. is there a better way to manage this ?
thank you -
Question about LIVE slide show
Hi,
I use keynote for my live presentation slide to slide...sometimes i need to jump the slide to the other slide immediately by hit the number of slide that i wish to jump to (say from slide 2 i wish to jump to slide 26 for the next slide ,i just hit the number 26 and enter i'll be there on the spot)
Question,
when i hit the number of the next slide as the above example, keynote will show a slide bar on the top that will show on the screen that i projected as well...how do i avoid the "slide bar" when i hit the number26?
Sorry for the complicated description above...cause,i really don't know how to descript the situation that i facing...haaaa...hope you all can understand..and give me some tips to solve it!!!!
Thanks and appreciate!!!Question 1 - Yes, exactly.
Question 2 - Rehearse Slideshow mode shows you what the Presenter Display will look like when you are in Play Slideshow mode, but for situations when you only have one monitor. A good example use case is when you are on an airplane and you want to rehearse your slideshow (hopefully not out loud) and you obviously only have your laptop monitor to work with. This way you can get used to working with the Presenter Display. When you go to Play Slideshow mode, it will look exactly the same, only your audience will be seeing your finished slideshow without the notes, Slide Browser, etc. from the secondary display output. -
Questions about the notes folder
Hey everyone,
After asking questions here and after 3 months of having my iPod, I figured out how to use my notes file on my iPod. I know( rolling eyes across the nation), but seriously, I got it to hold and open a file, but when I opened a document in that file, the file holds i'ms for me- is it supposed to have a bunch of computer text next to it? Such as text><?:::: Is this because there i'ms or what?you can not use non-Microsoft Word Documents
You HAVE to use non-Microsoft Word documents.
They cannot be a .DOC file. They must be plain text.
Is there a limit to the size of the notes?
Yes. 4K file size. Anything over will not be displayed.
if that can not be stored by iPod Nano, that is un-good.
It can be stored on the Nano but it cannot be displayed on the Nano. -
A question about output of show isakmp sa
I couldn't find any detail explanation of show isakmp sa output on ASA platform on CCO,
from ASA show isakmp sa, i can find some SA Type is user,some SAs type is l2l
all ipsec vpn configured type on this ASA is L2L, why the type of SA is user under some SA,
what is means of type is user?
thank you!
ASA# show isakmp sa
IKEv1 SAs:
Active SA: 5
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 5
1 IKE Peer: 1.1.1.1
Type : user Role : initiator
Rekey : no State : MM_WAIT_MSG2
2 IKE Peer: 2.2.2.2
Type : user Role : responder
Rekey : no State : MM_WAIT_MSG3
3 IKE Peer: 3.3.3.3
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
4 IKE Peer: 4.4.4.4
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
5 IKE Peer: 5.5.5.5
Type : L2L Role : responder
Rekey : no State : MM_ACTIVEwe have many ipsec vpn connection configuration, same config, but only some of them showing Type: User,
I find when ipsec connection not in active state. show isakmp sa show Type:user.
is this a default state.
I haven't found detail explanation from CCO ASA document? -
Questions about SAP Note Implementation
I have never implemented SAP note before. We are on ECC 5.0 and want to implement note 1041579. I looked at the correction instructions for the note and it says
Prerequisites
Note Correction
0000795865
Enh in the FI interface for revenue recognition 0120031469 1 0000455384
0120031469 1 0000455385
0120031469 1 0000455391
I have following questions.
1. Does it mean that I need to implement note 0000795865 before I implement 1041579, also what do the Corrections mean? Are these some other notes I have to implement
2. How can I see what notes have already been implemented in the system and which are not?
Will certainly award points for the right answerHi Srikrishna,
Does this mean that all these other notes (761173, 847204, 795865) should be implemented before 1041579.
Ans : There are normally pre-requisities for any note and again that pre-requisite note will have many more pre-requisite notes. It doesnt mean that we have to implement all those notes. See whether that specific note is applicable for the version and package that you are using. Also do a search as I have told you to see whether that note has already been applied.
Also the prerequisite for 795865 is 847204 how can that be the note number 847204 is greater than 795865?
Ans : Note numbers doesnt need to be ascending. I am not sure how a note gets its number, but definetly they dont need to be in an ascending order.
Regards
Aneesh. -
Question about Programming Notes for WD Abap / Context
http://help.sap.com/saphelp_nw04s/helpdata/en/03/0048413e466e24e10000000a155106/frameset.htm
Since an instance of the follow-on view has not yet been created, you must now decide whether to configure a component controller context with an appropriate mapping, or whether to fetch and check the data in an auxiliary class first and only pass it to the context of the follow-on view after navigation is completed. An application developer would, of course, prefer to use the context mapping method; using an auxiliary class, however, improves performance significantly.
Hello all,
If a fetch the data with auxiliary class, in which method do i fill the context of view after view is shown? The context of controller is mapped to view. Must it be done in supply function? But supply function is only one and i want to use a single context node for different views.
Another question. Does it make sense to fetch the data for a certain follow-on view
although navigation to this view will be definied late in a window?
Thanks
Regards
PaulHi Phil,
<b>Ideally, on a custom method on the Component controller. or secondary controller.
This method should call an Auxiliary ABAP class that actually gets data.
Your Comp controller method would be triggered by an Event on you view.
EG Button to navigate, a check button whatever.</b>
If i call the method of component controller in a method of my view, check the return code and only then do the navigation by firing an event. I think, it will work. What advantages will i get by calling a method of component controller via an Event?
<b>generally I avoid that if at all possible.
but it's been done before. Main reason is to avoid unnecessary
navigation. Through the errors and perform the checks as close to source
as possible. in mots cases you should be able to check data, and even load
info before actually doing the navigation.
ie Avoid firing plug till the last moment.</b>
For example, if have a "Next"-Button in a view. How can i decide in Method for "Next" what data must be filled for next view if in one case it could be one view, and in another case other? I thought, follow-up view must get data on his own. My question was, which method can be used for filling the data in this case. It is not wddoinit and not wddomodify.
Regards
Paul
Maybe you are looking for
-
Price Condition&Price update are disabled in S.O even after partial invoice
Dear All, We are using manual pricing condition in the Sales Order, when we do a partial delivery and billing for a Sales Order line item, the update prices function (button) is inactive and price conditions are greyed out. We are using Pricing Type
-
How to raise the ringtone volume in nokia 5200??
i cant figure it out how to raise the ringtone voice on my nokia 5200, when someone calls me the ringtone voice is low and than after like 4 seconds it goes higher and higher to the maximum...i want the ringtone volume to be at the maximum from the f
-
Base Unit of Measure to Sales Unit Conversion
Hi, Currently we are selling material in MT and all other transactions in MM and Production are in MT only. Now client wants material to be sold in Meters, also in some cases the same material will be sold in MT also. (As per my knowledge generally i
-
When I push my track ball now instead of acting as the enter key, it pushes the w and e keyes. Help?
-
How do I recover a password for a Numbers 09 spreadsheet
How do I recover a Numbers 09 spreadsheet password?