Question about final format for integrated film clips and moving images in webpages created by Muse

About a year ago I gave up even trying to construct websites. There were too many new factors and technical aspects of correct scripts and coding to make it interesting for a designer with no interest in programming. It´s understandable that all new gadgets such as mobile surf panels, mobile internet on different cell phones, lap tops and stationary computers and a lot of different browsers made it impossible to run with just plain html. But when I found out that many viewers couldn´t even watch Flash movies or solutions with flash components I said enough is enough.
Now a while ago when HTML5 was released I heard that it made it possible to create films and almost identical content as with Flash films without using them. Bought some templates and realized that it really worked. So here are my questions:
What format does Adobe Muse CC use when I add films and stuff into it, and what format will come out of it when it´s an official website?
Do Adobe Muse CC convert film formats so they will be visualized correctly on the end viewers browser, computer or phone?
Will Adobe Muse CC advice me of what film or animation format will be the best for my viewers on the web or on a mobile internet?
Are there any guidelines available for how I shall save and export filmclips or animations before they are imported into Adobe Muse CC?
Regards
Jack

Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit

Similar Messages

PXI 2527 & PXI 4071 -Questions about EMF considerations for high accuracy measurements and EMF calibration schemes?

Hi!
I need to perform an in-depth analysis of the overall system accuracy for a proposed system. I'm well underway using the extensive documentation in the start-menu National Instruments\NI-DMM\ and ..\NI-Switch\ Documenation folders...
While typing the question, I think I partially answered myself while cross-referencing NI documents... However a couple of questions remain:
If I connect a DMM to a 2 by X arranged switch/mux, each DMM probe will see twice the listed internal "Differential thermal EMF" at a typical value of 2.5uV and a max value of less than 12uV (per relay). So the total effect on the DMM uncertainty caused by the switch EMF would be 2*2.5uV = 5uV? Or should these be added as RSS: = sqrt(2.5^2+2.5^2) since you can not know if the two relays have the same emf?
Is there anything that can be done to characterize or account for this EMF (software cal, etc?)?
For example, assuming the following:
* Instruments and standards are powered on for several hours to allow thermal stability inside of the rack and enclosures
* temperature in room outside of rack is constant
Is there a reliable way of measureing/zeroing the effect of system emf? Could this be done by applying a high quality, low emf short at the point where the DUT would normally be located, followed by a series of long-aperture voltage average measurements at the lowest DMM range, where the end result (say (+)8.9....uV) could be taken as a system calibration constant accurate to the spec's of the DMM?
What would the accuracy of the 4071 DMM be, can I calculate it as follows, using 8.9uV +-700.16nV using 90 days and 8.9uV +- 700.16nV + 150nV due to "Additional noise error" assuming integration time of 1 (aperture) for ease of reading the chart, and a multiplier of 15 for the 100mV range. (Is this equivalent to averaging a reading of 1 aperture 100 times?)
So, given the above assumptions, would it be correct to say that I could characterize the system EMF to within 8.5uV+- [700.16nV (DMM cal data) + 0.025ppm*15 (RMS noise, assuming aperture time of 100*100ms = 10s)] = +-[700.16nV+37.5nV] = +- 737.66nV? Or should the ppm accuracy uncertainties be RSS as such: 8.5uV +- sqrt[700.16nV^2 + 37.5nV^2] = 8.5uV +-701.16nV??
As evident by my above line of thought, I am not at all sure how to properly sum the uncertainties (I think you always do RSS for uncertainties from different sources?) and more importantly, how to read and use the graph/table in the NI 4071 Specifications.pdf on page 3. What exactly does it entail to have an integration time larger than 1? Should I adjust the aperture time or would it be more accurate to just leave aperture at default (100ms for current range) and just average multiple readings, say average 10 to get a 10x aperture equivalent?
The below text includes what was going to be the post until I think I answered myself. I left it in as it is relevant to the problem above and includes what I hope to be correct statements. If you are tired of reading now, just stop, if you are bored, feel free to comment on the below section as well.
The problem I have is one of fully understanding part of this documenation. In particular, since a relay consists of (at least) 2 dissimilar metal junctions (as mentioned in the NI Switch help\Fundamentals\General Switching Considerations\Thermal EMF and Offset Voltage section) and because of the thermo-couple effect (Seebeck voltage), it seems that there would be an offset voltage generated inside each of the relays at the point of the junction. It refeers the "Thermocouple Measurements" section (in the same help document) for further details, but this is where my confusion starts to creep up.
In equation (1) it gives the expression for determining E_EMF which for my application is what I care about, I think (see below for details on my application).
What confuses me is this: If my goal is to, as accurately as possible, determine the overall uncertainty in a system consisting of a DMM and a Switch module, do I use the "Differential thermal EMF" as found in the switch data-sheet, or do I need to try and estimate temperatures in the switch and use the equation?
*MY answer to my own question:
By carefully re-reading the example in the thermocouple section of the switch, I realized that they calculate 2 EMF's, one for the internal switch, calculated as 2.5uV (given in the spec sheet of the switch as the typical value) and one for the actual thermocouple. I say actual, because I think my initial confusion stems from the fact that the documenation talks about the relay/switch junctions as thermocouples in one section, and then talks about an external "probe" thermocouple in the next and I got them confused.
As such, if I can ensure low temperatures inside the switch at the location of the junctions (by adequate ventilation and powering down latching relays), I should be able to use 2.5uV as my EMF from the switch module, or to be conservative, <12uV max (from data sheet of 2527 again).
I guess now I have a hard time believeing the 2.5uV typical value listed.. They say the junctions in the relays are typically an iron-nickel alloy against a copper-alloy. Well, those combinations are not explicitly listed in the documenation table for Seebeck coefficients, but even a very small value, like 0.3uV/C adds up to 7.5uV at 25degC. I'm thinking maybe the table values in the NI documentation reffers to the Seebeck values at 25C?
Project Engineer
LabVIEW 2009
Run LabVIEW on WinXP and Vista system.
Used LabVIEW since May 2005
Certifications: CLD and CPI certified
Currently employed.

Seebeck EMV needs temperature gradients , in your relays you hopefully have low temperature gradients ... however in a switching contact you can have all kind diffusions and 'funny' effects, keeping them on same temperature is the best you can do.
Since you work with a multiplexer and with TCs, you need a good Cold junction ( for serious calibrations at 0°C ) and there is the good place for your short cut to measure the zero EMV. Another good test is loop the 'hot junction' back to the cold junction and observe the residual EMV. Touching (or heating/cooling) the TC loop gives another number for the uncertainty calculation: the inhomogeneous material of the TC itself..
A good source for TC knowledge:
Manual on the use of thermocouples in temperature measurement,
ASTM PCN: 28-012093-40,
ISBN 0-8031-1466-4
(Page1): 'Regardless
of how many facts are presented herein and regardless of the percentage
retained,
all will be for naught unless one simple important fact is
kept firmly in mind.
The thermocouple reports only what it "feels."
This may or may not the temperature of interest'
Message Edited by Henrik Volkers on 04-27-2009 09:36 AM
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
John

You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

Some question about fade in // fade out by hideEffect and showEffect in Actionscript

Some question about fade in // fade out by hideEffect and
showEffect in Actionscript
Please kindly take a look at the following page:
http://camusmiu.no-ip.com/HounganQuestion/PictureHolderTest.html
(can view source)
I tried to make an image preloaded and scale the image to
it's preferred size.
When I came to consolidate the stuff into a component, I
found the application goes weird as I implementation the show/hide
effect.
The third trial which just hide and show the images directly,
instead of using viewstack, fail to bring the second image onto
screen.
It just used fadeOut instead of fadeIn(you see there is a
flash of the second image)
After some study of showEffect and hideEffect behaviour,
seems the mechanism of hide/show a component works in this way:
this._fadeIn:Fade = new Fade();
this._fadeIn.alphaFrom = 0;
this._fadeIn.alphaTo = 1;
this._fadeIn.duration = 1000;
this._fadeOut:Fade = new Fade();
this._fadeOut.alphaFrom = 1;
this._fadeOut.alphaTo = 0;
this._fadeOut.duration = 1000;
Component_A.visible = true;
Component_A.setStyle("showEffect", this._fadeIn);
Component_A.setStyle("hideEffect", this._fadeOut);
then when I set Component_A.visible = false, the sequence
works like following:
Component_A.visible = true
Component_A.visible = true, alpha = 100;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 0;
Component_A.visible = false;
The above sequence works visa versa as:
Component_A.visible = false;
Component_A.visible = true, alpha = 0;
Component_A.visible = true, alpha = 50;
Component_A.visible = true, alpha = 100;
Component_A.visible = true;
(Correct me if i am wrong)
========================================================================================== ====
From what I observe from the application, I have two
question.
1) When more than one component using the this._fadeIn,
this_fadeOut as the hide/show effects, the component in instance of
this._fadeIn? will it mess out if more than one component using the
fadeIn instance in the same time?
2) from the third component, i.e. PictureHolder3, when I load
other the picture , it fade out the new image instead of fading
in... Seems there is problem if I hide show too frequent. I think
when I hide then show right the way, the component only do the hide
part...
Can someone pls look into it and tell me what I did wrong?
Cuz in normal practice I don't think appropriate to use ViewStack
in Actionscript...

Hello Jack,
Currently, you can only import an swf file or you can embed videos from youtube, vimeo etc. into Muse / add HTML5 Video to Your Website.
Take a look at these simple videos that explain the currently available processes for adding videos in Muse, in a step by step method:
1. http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flic kr-or-hulu-video/
2. http://www.youtube.com/watch?v=5in4swnIFsw
3. http://www.youtube.com/watch?v=KnBFLQheOk4
Hope this helps.
Cheers
Parikshit

Can any one send procedure for integration between XI and Geographic inform

can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
Thanks

Hi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..<i></i>

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

Doc for Integrating Panasonic TDA100 and Panasonic KX-TD 12/32 with CUCM

I need Doc for Integrating Panasonic TDA100 and Panasonic KX-TD 12/32 with CUCM 8.6
Appreciate your support

Hi Paolo,
I also need to integrate a Panasonic PANASONIC Ref. KX-TDE100 - Version 5.0, with a CUCM 8.6.2, I'd like to do it with SIP trunks since the Panasonic has the capability to do it.
I do have on my scenario this equipment:
CUP 8.6.2
CUCM 8.6.2
IOS Gateway: Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(2)T1 with voice service voip enabled.
What do you think should work better,
a) Use Gateway as CUBE
c) User CUP as SIP Proxy
Is there any other better solution?
Please let me know your comments and if you have a link for any documentation regarding your answer.
Thks,

2 Questions about final cut pro 5

My first question is quite simple, I know that previously final cut pro could only use up to 2.5GBs of memory, now I'm just a bit curious if it can use more since leopard is a 64-bit OS. Right now I'm using Final Cut Studio 1. I'm just asking this question since I intend to get an additional 4GB of ram (Right now I only have 2GB) I'm going to get Muskin's MacPro memory. I generally run my system down to about 200MB of free memory and sometimes down to 10MB when I'm using photoshop in conjunction to FCP. What does everyone think about getting an additional 4GB?
Thanks for the answers.
Okay, to not make two posts I'm give me final question/Problem. Ever since I've upgraded to Leapord I noticed that the playback quality in the canvas and viewer is poor. There is bad gamma. What I mean by that is that i'm getting extremes in color, I have areas that look normal followed by areas of over saturated color. It's more on the over saturated side though. Besides that the play back quality is poor, even though my sequence settings are at "Best" for video processing. I also seem to get jagged lines on things like railings, people's shoulders, and on other edges. My picture quality is grainy, however there are no artifacts. Even on the FX transistions I get the jagged lines on edges of oh say page peels and what not.
Now when using DVD player or watching my MPEG2's on DVD Studio, they play poorly too. The image is clear however I get the horizontal lines when there is motion. Now when I put one of my DVD's in my DVD player (not computer) the problem goes away and everything looks fine. This is less of a problem (the horizontal lines), but I don't understand the poor playback quality.
The video looks fine on my external NTSC video monitor.
I have the GeForce 7300 graphics card, with the 24" samsung 245BW. I upgraded to 10.5 on a clean install.
Thanks a lot everyone!!

Thanks for my memory question!
However I'm still getting poor looking footage. Even when I open up my source clips and play them they look poor in quality. I'm getting the horizontal lines on everything that moves and corners are not sharp, they look distorted and jagged. I never had this problem before I'm not sure whats the cause or the solution. Even the footage from Final Cut Studio's tutorial looks bad (grainy, strange contrast, jagged corners and lots of horizontal lines). However the edges on my footage look a little more jagged. I think i mentioned it already but the FX transitions that are page peels, cube spins...etc give me jagged edges too.
I removed flip4mac and all other non-apple codecs too.
ugh i hate computers sometimes
-Tom

Question about get web service result in actionscript and convert data format

Hi, All
I have question about how to get dataset from web services
and put it in tree structure. I have 2 questions about this:
1, How can I get data correctly in actionscript?
I have no problem to get data by
<mx:ArrayCollection id="acFolder"
source="{mx.utils.ArrayUtil.toArray(MyGServices.getFolder.lastResult)}"
/>
And display in datagrid.
But when I try to use
public function
handleFolderContents(event:mx.rpc.events.ResultEvent):void{
arData=mx.utils.ArrayUtil.toArray(event.result);
acData=new ArrayCollection(arData);
input.text=acData.getItemAt(0).id;
Seems I can’t get data, it always say:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
2, how to convert data format
I get data from web service and want to convert it to tree
structure, as mention below:
I get:
<Array>
<id>111</id>
<Name>Production1</Name>
</Array>
<Array>
<id>222</id>
<Name>Production2</Name>
</Array>
Convert to:
<mx:XMLList id="treeData">
<node>
<node label="Production1" data="111">
<node label="Production2" data="222"/>
</node>
</node>
</mx:XMLList>
Please help me.
Thanks.

First, don't specify the package path in the argument
declaration. Instead import the event object:
import mx.rpc.events.ResultEvent;
The docs state this emphatically.
Second, try "lastResult", in place of "result":
arData=mx.utils.ArrayUtil.toArray(event.lastResult); // I am
not positive about this. I maybe recall reading that result was ok
for the event object, but maybe not.
Finally, why do you want to convert the xml? You certainly
could, but it would be a manual process, recursively reading the
existing xml nodes and building the new structure, but again, why?
Just use a labelFunction if necessary to display the nodes as
you wish.
Tracy

Question about CPU usage for video playback

I've asked a related question already on the Safari forum, but would like some clarification, please.
The speed of this iMac is 400 MHZ and whenever I go to YouTube or almost any other site that requires video I see that the CPU usage can peak way up at 80% or more. I have Flash 9 installed which has a minimum of 500 MHZ, so I get pretty choppy video, but that's not the issue here. I can live with that. I keep any other applications closed. I'm often running a small fan over the top of the iMac to help vent the buildup of heat. I can monitor the temperature at the Hard Drive and I suppose that gives me an idea, of sorts, about general temperature conditions inside.
The answer I got was that this kind of CPU usage could be detrimental to the processor as it builds up excessive heat and to keep this kind of video to a minimum.
My question is can anyone roughly suggest what a maximum time on YouTube, for example, would be, 2 minutes, 5 minutes, is 10 minutes too long? I have plenty of RAM at 768. Some guidelines?
Thanks.

Hey WZZZ,
Thanks for the star and kind words.
I'm the de facto Mac guy at my kids' school and we have around 25 iMac Slot Loaders working there. You can imagine they get abused quite a bit. There are 10 running Garage Band in the Music Department. That puts a tremendous strain on the CPU and I'm actually surprised that they run it so well. My son had a 600 iMac running GarageBand, he was complaining that it was getting jumpy and when I looked at it he was running 10 unlocked tracks simultaneously! So now he has an eMac G4 800 and that of course runs a lot better.
So to sum up, with all the abuse of those machines in terms of the CPUs the problems I have with them have nothing to do with that. The problems have more to do with parts of the OS that they toss, headphone jacks abused, CDs jammed in the slots, and the like.
A couple of other related things. I've got Hardware Monitor, demo, installed and I think it reported it could only find the hard drive sensor, if I'm not mistaken - nothing else on this Mac with a sensor. Is that right?
I see references to CPU sensors on 400 iMacs but on the 400 I have here for repair Temperature Monitor reports no sensors. Perhaps there were different versions of the 400.
But very good to hear that the fan is a good idea for CRT related things. Should I keep the fan running-mostly for that hard core CRT stuff- even if the computer is sleeping and the room temp. is only around 62-64 F.? (We need to put on warm clothes to sit in front of this thing now, but worth it to keep this old machine happy).
On the one I did the fan pushed the airflow in the direction of the passive flow of the iMac - in at the bottom and out the grill by the handle.
One more question, more out of curiosity than anything else: If I move this small clip-on fan close to the case - right now it's about 3 feet away and the image is stable - the screen begins to flicker and flutter quite a lot. My theory is that that's happening not necessarily because of electro-magnetic interference from the fan motor, but rather, because the back of the tube is getting cooled unevenly. What do you think?
Well the classic failures that I see in the iMac are in this order:
1) Dielectric breakdown of the flyback transformers internal insulation. This is heat/age related and a common problem with CRTs in general.
2) Breakdown of high voltage electolytic capacitors and regular high voltage capacitors on the neck board and PAV supply.
3) Solder problems with the flyback itself. This is diagnosed by the upside down boot technique.
I used to repair these problems but now it's easier for me to swap the Firewire boards into working 350s. I've got 12 of those in the basement currently.
Richard

Question about firefox permissions for sites

i have a question about sites permissions
in google chrom it is easy to set permission for each site like (java, flash plugin, image , ...)
http://i58.tinypic.com/nl66v9.png
but i prefer to use firefox
is there any addon or something else to have this options in firefox ?

You can inspect and manage the permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions

Question about Final Cut Studio 3/Final Cut Pro 7

Last year I bought Final Cut Studio 2 and got a student discount.
I was thinking about upgrading to Final Cut Studio 3, but I saw a post that said you can't upgrade if you have the academic version. First of all, is this true, and secondly how can I tell if I have the academic version?
If I can't upgrade, I can't afford to buy the whole package again. And surely I should have been informed of this! But can I edit a project on Final Cut Pro 6 and then work on it on Final Cut Studio 7, and back again? I presume not, but it's worth asking because I'm pretty much screwed if not and I can't get the upgrade.
Thanks

I want to upgrade because the macs at uni have upgraded, and I don't live near the uni I attend so it isn't practical for me to stay in their edit suites till late like everybody else does. I only bought the mac and final cut studio last year for this reason! So I prefer to edit from 2 machines: Mine, when I can, and the ones at uni when I'm collaborating with the 'crew'.
However, I cannot see academic version written anywhere. And I know this is going to make me sound even more stupid than I already do, but I can't remember if I got the student discount on Final Cut, or whether it was just on the mac. Does anyone know where I should be looking. I've checked the 'about final cut pro' details and looked through the packaging (and my emails for the receipt) but I cannot see anything.
Thanks

HT3702 Hi I would like to ask a question about my billing for some things

I would like to ask a question about my billing

This is not Apple. These are user forums. Questions about billing, credit cards, etc. should be addressed directly to Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us

I have a question about the downloads for CS4.

I had to go back to CS4 Master Suite after my card was deactivated, because adobe got hacked and my credit card was compromised. Since I was in the middle of traveling and I'm still in a bad situation, because of it I am still on CS4. Which sucks for my workflow now.
Well, anyway... Sorry, still very frustrated.
When all that happened I had to download CS4 Master Suite from your site, because the disks are not with me. Photoshop continuously shutdown on me. If I attempt to move a layer up or down in the layers panel it froze and shutdown every freaking time. After Effects and Premier Pro could not export or render anything. Illustrator did what it's supposed to do most of the time. Photoshop, Illustrator, After Effects, and Premiere Pro are the only programs I use really. They are essential to my freelance work and I have had to turn away projects ever since this whole ordeal started last year.
About a month ago removed CS4 and downloaded Creative Cloud again, because I thought I was in a place were my bank could send me a card. Some how I received another monthly trial and everything was awesome again while I waited for my card. My card didn't come. The trial ended and now I'm right back to not being able to integrate with Cinema 4D and so on. Now that is not your fault. So, I'm not going there.
I did, once again, download the install file for CS4 Master Suite and install the same programs. They are just as problematic as they were the first time I used the .dmg file from your downloads site.
Now I know you are far away from CS4, but that is what I am on until I can get back to the US and get another card, because you don't accept paypal or anything else.
Is there anyway I can get an actual proper working install of CS4. I can work around all the features I lost if I can get a download that actually has everything it's supposed to have in it. I do not pirate software, which is why I went backwards. So, please, please, please, please do something about that .dmg that doesn't have everything need to make the program work properly.
Thank You,
From

Your technical issues have zero to do with the installers. Whatever is at play is rooted on your system, but you have not provided any specific system info nor crash logs. Pardon me, but "Photoshop is crashing" is a useful as my 88 year old grandma telling me her phone doesn't work...
Mylenium

Question about final format for integrated film clips and moving images in webpages created by Muse

Similar Messages

Maybe you are looking for