Question about FTP Adapter from Seeburger

Hi,
Somebody tell me please, if I can use the FTP Adapter Seeburger 1.6.5 to send documents to a FTP Server Test Environment, without using none of the VAN supported on the FTP Adapter?.
Best regards.
Hervey P.

Hi Andrea,
can we call Seeburger modules(BIC,splitter) in XI plain FTP or any XI adapters?
I was under assumption that XI adapters wont support Seeburger modules.
please clarify me.
thank you.

Similar Messages

Details on XI EDI adapter from seeburger

Hi,
We currently have our B2B integration going through Gentran & Webmethods.
We are having a evaluation process on the different tools available.
Can anyone give information on the licensing details of the XI EDI adapter from seeburger? Also do they have evaluation period? Has anyone gone through this process?
We have written to seeburger on this, but i thought of posting on SDN as the responses would be faster
Thanks & Regards,
Renjith

Hi Renjith,
There is no downloadable trial version available.
You need to contact your local or regional Seeburger sales office.
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Abhy
Message was edited by: Abhy Thomas

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Question about receiving mesage from those not on ...

I have a question about recieving message from those who are not on my contacts
I enable anyone to contact me through IM and call. a friend who I did not yet add as a friend (not in contact)call me by mistake. he sent message of apology to me, say "sorry for mistakeing call,"
but, i did not recieve such mesage, even thoughh i got notification of call, why did not i recieve his mesage if i Can receive IM from anyone not on contact list??
i try to send him mesage to test. He also did not see my mesage show up ,, on his screen it only show that he call by mistake and that he sent mesage ((which, i never recieve).
i try this on some of my friend's friend who has enable all call and IM through, they also did not recieving mesage I sent them however can see notification of call i make.
does this mean, Only you can see mesage of those in contact list even though you recieve from any body? am i misunderstand How skype is working? Please enligthen me, thx...
thx for info.....

I'm not sure I understand you entirely, but you could put the CDs on the computer with a CD ROM drive and then boot that computer as a firewire drive to the computer without a CD ROM drive and then copy your music over.

FTP Adapter and Seeburger

Hi,
We are using the FTP adapter and the Seeburger BIC adapter (is configured as a module in the FTP communication channel)
When we receive EDIFACT files the first step that is performed is the conversion from EDIFACT to XML messages (done by Seeburger module). This process performs also a XML syntax check. When this syntax check fails the complete process stops. The FTP adapter wants to read the file (with the error) again and again.
When we have 10 files in the directory and the first one is in error, the adapter does'n process the other 9 anymore!!
Quality of service is: Exactly Once.
Thanx
Ron

Felix / Ron,
In the Seebuger FTP adapter, I have
Module Key - exit
Parameter Name - JNDIName
Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
Can one you throw some light on this...what to expect from this definition.
Thank you,
Pam

Question about RFC adapter

Hi,
There is this little concept about RFC adapter
I would like a liitle clarifiaction about..
Here it goes..
Let's just say I have made an RFC in R/3.
The same I have imported In xi.
now when we say RFC ...By definition
it is a remote enabled function module.
We import the "interface" of the Same in Xi
So if I make changes in the BODY of the RFC in
R/3... do i need to reimport it in XI.
Besides when XI's reciver RFC adapter is using the
Rfc's interface to make changes in R/3
is it using a Copy of this RFC created in R/3
I would like to intercep at the point it's doing so...
tried putting a break point in the body of rfc.
Another question is regarding RFC sender adapter
Program ID..tcp Ip protocol.
Conceptually How does this connectivity takes place
I tried and it worked ...
I dunno How to explain this connectivity taking place
just on the basis of PROGRAM ID...
Kindly Help

Hi Deepak,
+
>>We import the "interface" of the Same in Xi.So if I make changes in the BODY of the RFC in R/3... do i need to reimport it in XI.+
Yes you have to.
>>Another question is regarding RFC sender adapter.Program ID..tcp Ip protocol.Conceptually How does this connectivity takes place I tried and it worked ...I dunno How to explain this connectivity taking place just on the basis of PROGRAM ID...
·An RFC server program registers itself under a program ID to an SAP gateway (not for a specific SAP system).
·If an RFC call is passed on from any SAP system to this SAP gateway with the option Connection with a registered program (with the same program ID), the connection takes place with the corresponding JCo server program.
http://help.sap.com/saphelp_nw04/helpdata/en/09/c88442a07b0e53e10000000a155106/content.htm
Hope this will clarify your doubts.
Regards
Suraj

Question about Offset printing from Indesign

Hello everyone, I have a question about printing too a DPX rip platemaker from Indesign. When I print my file to the rip, it seems to bold the text when it should not be bold, I do not know if this is an Indesign or rip error, but if anyone has a solution I would be grateful for any assistance.
I dont know if it's necessary, but the OS with Indesign is Mac OSX, printing to a ripmate on Windows 2000.

Have you applied an outline to the text?
Try unoutlined text
Is the text near an effect like drop shadow or other filter?
Move the text to top layer or above any effects.
Is it just this file or any file?
Need to figure out if it's just this job or all of them or at least let us know.
Have you got the fonts installed at the RIP end, perhaps it's rasterising text that the RIP has not got the font?
You could try exporting to PDF first, that would embed the fonts in the PDF.
Let us know if any of this helps?

What about ftp-access from www?

Hi folks,
first I want to say, I browsed the forum since May 08.
Second please excuse my English.
I'm still trying to set up TC for FTP access from www.
afp works but what about ftp? -
I talk about ftp (RFC959) described in 1985! Why it does not work in a 2008 manufactured product?
I do not demand sftp but I never heard about a company that sells networking products which do not support ftp forwarding...
Apple -that's poor performance.
Hundreds of users are still waiting for firmware update.
Please publish the firmware, if your lack of resources doesn't allow to solve this problem!
Does anybody has an idea to access TC from WAN?
<Edited by Moderator>
Thx

As you have mentioned that your ISP is an DSL provider, Login to the setup page of your Router and click on the status tab and check if the Internet IP address.
Have you enable the FTP feature on your Router? If not then login to the setup page of your Router and click on the storage tab and below Enable "FTP Server" and let the FTP Port be 21 and below select the folder which you want to access it from Internet and click on save settings... Then click on the Administration tab and check for the "Server Internet IP Address" and also below check if Anonymous FTP access is it Enable or Disable.If you wish to allow anonymous Internet access then you need to Enable it or let it be Disable and click on save settings...
To access your FTP server from Internet note down the WAN IP, So it should be ftp://ftp.wan-ip:21. This should allow you to access your drive from the remote location.

Question About Adding Ram from other laptop to T-series Thinkpad

Hi,
I have a question about adding additional RAM. Right now I have a 4gb ram stick in the t510. I have an acer laptop which I do not need and there is a 4GB ram stick onboard (maybe two 2gb ram sticks) there in that older laptop. Would it be possible to add one stick of 2gb ram (or 4gb i need to check if it is 2 or 1) from the acer to the lenovo thinkpad making the total ram in the thinkpad over 4gb????
Thanks in advance

Hi Richk,
Yes, I am using a 64-bit operating system. I am running on windows 7. And as for reported incompatibilities....technically taking a RAM from another laptop and placing it in the laptop should be the same as purchasing a RAM card from ebay or something and putting into the laptop right?

Some question about receiving messages from Skype ...

Hello there,
I have a question or two about recieving messages from Skype users, who are not on my contact list"
1. If I have enabled to only receive messages from people in my contact list, will they be notified when they try to send me an instant message, that they need to add me first?
2. Will I still be able to see messages sent by contacts who are not in my contact list and them see my messages*, if we are both in a Skype conversation group but not on each other's contact list? *The messages either one of us posts in the Skype group conversation
I appreciate the information
Thanks
Solved!
Go to Solution.

1. The person sending this message will not receive any notification about failing message delivery. The message will just disappear in nowhere.
2. Messages exchanged in group chats will be seen both by you and the other person, even if this person is not in your Contact List.

Question about Removing Permissions from the System Folder with chmod

Hi
I have a question about the removal of permissions from the System folder (and sub directories and files).
Background
Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
The Problem
The issue that remains is a permissions check using Disk Utility keeps reporting
ACL found but not expected on "System".
followed by an extensive list of sub directories and all.
Attempts to repair take hours and the same errors are reported.
Found Solutions
I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
sudo chmod -R -N ./System/* ( to remove all ACLs)
or
sudo chmod -R -E ./System/* ( to replace all ACLs )
My Question is ( to the UNIX gurus):
What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
Many thanks!!

OK
So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

Design question about instant download from

Hi All,
Here is a design question for you:
Background:
The application we built is being upgraded from time to time and we send it to our users.
our users use it on a network so there is only one file to upgrade (and being done by the sys admin)
We send them a �patch�; actually, it�s a new version of the application they place it in the relevant folder and continue to work with a new version.
Problems:
1. We send them the patch via email - sometimes it takes a while until they read their email and at they are using an �old version of the system�.
2. Some of them are not computer savvy (when it�s not the sys admin) and we need to guide them as where exactly to place the file (there are 3 files)
Our (conceptual never build yet) Solution:
Build a program just like Norton antivirus (or other) that prompts the user from the task bar (next to the clock) that a new version is available and by
clicking once it will automatically download the file and store it in the correct folder.
Question:
1. Did anyone try anything like this before (or something like) who can tell me about it?
2. Do you think this kind of system will work for us?
3. Does anyone have a better solution?
Thanks
Peter

Java WebStart is the deployment technique suited for your purposes.
The deployment will be done via a webserver running a jnlp servlet (provided).
The applications may either run offline, or check online for automatic updates.
You have several configuration options.
ArgoUML and jEdit are two open source apps delivered this way.
Your app will need to be adapted though.
And your customers need an online browser with installed jvm.

Question about transferring files from a Mac

Hi there!
I want to ask about the new iPad mini (and or the iPad 3) especially with transferring files from a Mac.
I normally just do the "normal" way of transferring files (.doc files, .mp3 files or .mp4 video files) i.e. via the USB port of my Mac. But is there a faster, easier and a wireless way to do it?
Please advice.
Thanks.

onslaught wrote:
I couldn't find Dropbox on the Mac App Store but i could find Dropcopy in there.
Stupid question: will i need to also install Dropcopy on my iPad 3/iPad mini in order for my files to be transferred?
Yes, it will need to,install it on any machine you wish to use it on.
also, you should spend some time on the Drobbox website to see how it works. You won't find it in the Mac App Store, but can still easily using it on a Mac.

Question about transferring data from 3GS to iPhone 5

I upgraded from 3GS to iPhone 5. Before reading any articles on transferring data through iTunes, I configured my 3 email programs, contacts and calendar (Google). The Apple instuctions state that I should backup 3GS FIRST, then restore to iPhone 5. Question is, if I do the backup and restore AFTER having configured my mail programs, will that cause problems, such as creating duplicate accounts and contacts? I am especially concerned about creating duplicates in my contact list, which would be a semi-horror if I had to delete every other one of over 1,700 names. Perhaps I should delete my email accounts and contact list BEFORE restoring to my iPhone 5, basically start from scratch?

When restoring the device, whatever is currently setup on the device is irrelevant. Everything currently setup on the device will be erased.

Oracle B2B 11g question about pulling data from remote TP sftp server

Hi,
We would like replace our custom b2b solution with oracle b2b, but without resulting much changes in remote TP side. To do that the following issues are to be resolved.
1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it.
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type.

1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it. I am not sure what do you mean by AS1 1.1 but yes, SFTP is supported in Oracle B2B and if you want to poll a SFTP location, then you need to create a listening channel in Oracle B2B. For creating a listening channel, please refer -
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/bb_listen_chan.htm#BAJJICJJ
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?Yes, it is possible. There is a setting "Preserve Filename" in transport protocol parameter of a SFTP channel which should be enabled for this purpose.
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type. In case of FTP/FILE/SFTP, file name can be used to pass document type and revision information to Oracle B2B. Please refer "Filename format" setting on the above mentioned link.
I figured it out from another thread about how to pull the file. I configured the listening channel so that it reads from a remote server using sftpo protocol. And I have given the filename format as %FROM_PARTY%.dat. I am putting a file like TESTBC.dat. TESTBC is the name of the remote TP. B2B is reading the file but, recognizes the document tupe, but says that FromTP null. What is the solution?
Make sure that TP name is same as what you are giving in filename (cross-check for spelling). You may also try with default naming convention (do not mention anything in Filename format in listening channel configuration) - %FROM_PARTY%_%TIMESTAMP%.dat
for eg -
Acme_12345.dat
Regards,
Anuj

Question about FTP Adapter from Seeburger

Similar Messages

Maybe you are looking for