Question about how put a icon custom in toolbar.

I have developed a accion in acrobat X but i need put a icon in toolbar for execute this accion, i have put an icon but this icon only shows the window modify an accion, somebody know how custom a icon for execute my accion?

It's not possible to place an Action onto the toolbar, nor can you give them custom icons. Are you actually talking about a JavaScript function which creates a button? If you are, you can't put those on the toolbar either. The USER can drag them there, but the script cannot.

Similar Messages

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

Round trip workflow with proxies between Premiere and AE / a more general question about how these programs work?

Hi all,
I'm new to editing with proxies in Premiere and have some questions about how to handle the relationship with After Effects. Say I have a rough cut (with proxies) and I want to send it to AE to do some effects. The simplest thing to do seems to be to replace the proxies with the originals in Premiere, send the project to AE and do my thing. But if I then want to send the project back to Premiere, it will involve the original files, which are too machine-intensive for me to edit. In theory, it seems like there should be a way to send the project with original footage to AE, do effects, send it back to Premiere, and then replace it with proxies to do further editing while retaining the effects.
This leads to a confusion about how AE works. When I do an effect, am I correct in assuming that it does nothing to the original file? If that's the case, it seems like it shouldn't matter (in the editing stage) what file AE "applies" an effect to (proxy or original). But I feel like there's a hitch in this workflow. The same question could also be asked about going back and forth in Speed Grade.
Perhaps there is no real answer to this and the best option is to save effects and grading for after I have picture lock, but sometimes that's not entirely possible or convenient, etc.
Hopefully this makes some sense—It's a little hard to explain.
Thanks.

Hi Mark,
Here are the specific sections of the manual that should give you the best explanation regarding the Check out/in workflow for FCP projects in Final Cut Server:
Check out:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =5
Editing:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =6
Check in:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =7
-Daniel

A few questions about how ZPM works.

We have patch management (in ZCM 11.2.2), but honestly don't use it much. I have a few questions about how it works that might make me use it more, if I understand it more.
If I deploy a patch (or a set of patches), it creates a bundle for that deployment. That bundle seems to include actions that deploy the actual patch bundles (correct?). Do I have to recreate a new deployment bundle every time I want to push a new patch? i.e. If I push a Java update, and a month later, a new one comes out, do I build out a new bundle with the new patch in it, or do I modify the old one?
Once the patch is deployed, can I safely delete that deployment bundle, or should they just pile up?
Is there a way to "auto-approve" patches? Lets say I always want a group of machines to have the latest Adobe Flash Player patches. Can I set up ZPM to automatically cache and push the latest patches for a specific product, or do I have to manually remediate each patch? (I'm thinking of how MS's WSUS does "auto-approval")
I see most packages aren't cached in list, but occasionally, a patch is cached without me touching it. Why? Can I change what gets automatically cached?
Thanks for any help/answers you can provide.
-Adam

Originally Posted by adrockk
We have patch management (in ZCM 11.2.2), but honestly don't use it much. I have a few questions about how it works that might make me use it more, if I understand it more.
If I deploy a patch (or a set of patches), it creates a bundle for that deployment. That bundle seems to include actions that deploy the actual patch bundles (correct?). Do I have to recreate a new deployment bundle every time I want to push a new patch? i.e. If I push a Java update, and a month later, a new one comes out, do I build out a new bundle with the new patch in it, or do I modify the old one?
Once the patch is deployed, can I safely delete that deployment bundle, or should they just pile up?
Is there a way to "auto-approve" patches? Lets say I always want a group of machines to have the latest Adobe Flash Player patches. Can I set up ZPM to automatically cache and push the latest patches for a specific product, or do I have to manually remediate each patch? (I'm thinking of how MS's WSUS does "auto-approval")
I see most packages aren't cached in list, but occasionally, a patch is cached without me touching it. Why? Can I change what gets automatically cached?
Thanks for any help/answers you can provide.
-Adam
For #1, (assuming you're not using baselines), you would check the new version of the patch (vulnerability) and do a new deployment.
#2 - once you're satisified that the machines are deployed (or the best to your ability) you can delete the DEPLOYMENT package. It doesn't delete the actual vulnerability bundles to my knowledge. That's why it's a good idea to name your bundle deployments with something meaningful, IMO (and maybe include a nice desription).
#3 - currently I don't believe this is possible. I know you can probably configure it to auto-download the patches, but not auto-deploy everything. Given the propensity for software to wreck other things (hello MS .NET patches), this is probably not a good idea. At least I'd never auto-download and auto-deploy any patches without testing them first, and certainly take my servers a little more cautiously than my workstations.
#4 - I think you can configure what's cached, but I could be wrong.
I know there's a lot of improvements coming in the pipeline, and it doesn't hurt to "vote" for your enhancements via the enhancement system (more work for Shaun--haha)
--Kevin

I have a question about how to contact HR with e-mail.

I read the rules about anything about HR is not allowed, but I also read to contact HR directly, so I won't ask anything further here. My question is, how? I searched for an e-mail, but all I have been able to find is a phone number I can't ring since I have no phone, just internet. Thank you.

Hello Dennis,
If you're a Best Buy or Geek Squad employee and do not have access to a telephone, then two alternative contact options exist for you: speak with your direct supervisor or use the My HR app within Employee Toolkit. If you are not a Best Buy employee, however, our HR support team will not be able to assist you -- these contact channels are for employee use only.
Thank you for your understanding, as well as for taking the time to post.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Question about how the Robocopy /B switch works...

I've been experimenting with robocopy recently, and most switches seem self explanatory for the most part; although I have a question about the /B switch.
The help says the following:
/B :: copy files in Backup mode.
I've checked multiple forums and websites to try and elaborate on this a little more, and from my understanding this switch enables backup mode that essentially gives the ability to change the acls of a file/folder when the account running robocopy does
not have sufficient privileges, to perform a successful copy.
My question is, when the acls are changed when using this "backup mode" switch, with the /copyall switch, will the file still retain the same user access that it originally had - or does it change all of the security settings?
I'm hoping it will somehow change the security settings, create a copy, and retain the same acls as the original - so users can still access necessary files.
Can someone please explain how this "backup mode" works?
Thanks in advance.

This is a very useful thread with a lot of hostility in it.
I have to agree with Jonathan and hazymat: there are few other forums that will discuss the exact function of /b switch, the TechNet article just says "copies in Backup Mode" (I have the article bookmarked), and when doing a google search, THIS page comes
up as the top result! Kinda difficult to tell people they should go search, when you are the exact destination of that search, isn't it? ;)
No offense to anybody working hard to help out here, but this is why sites like Stack Exchange will overshadow every traditional tech forum very soon. More concise question/answer format, more civil, and they actually encourage old questions developing new
answers! All q&a is cataloged for future reference. Their focus is on being a 'resource'.
The negativity here is unfortunate, you guys have great potential to be a very helpful resource for people. Who are you trying to be, the guys with all the answers, or the guys who say "get out of here, your answer isn't in here. Go search for it."?
Regardless, many thanks to jrv! for helping me with my robocopy batch SCRIPT which I just used to create an automated backup! Take care boys. And yes, I just bumped your old-old thread.
Unfortunately I think you miss the point. RoboCopy is an application. It is not a script. This is a scripting forum. Many people come here nd never read the forum guidelines and do not ask script related questions.
The /b switch is documented in RoboCopy help. Of course it assumes the reader is a trained Windows tech and knows what backup mode is. It is used by nearly all backup software when backing up a live system..
¯\_(ツ)_/¯

Another one question about how to download applet (not using external tool)

Hi
i write tool for downloading applet on card. I use apdu trace from NXP eclipse plugin as source of information and i read also about cap-file format in Java Card Virtual Machine specification. And i have questions about data transferred by LOAD command.
As example - from apdu trace i see that transferred data are "C4820E33 DATA1 DATA2". Full length of transferred data is 0x2EE2.
C4 - OK, this is "Load File Data Block" tag as specified in Global Platform
820E33 - OK, this length of tag, =0x0E33
DATA1 - sequence of cap-file components: Header.cap, Directory.cap, Import.cap, Applet.cap, Class.cap, Method.cap, StaticField.cap, ConstantPool.cap, RefLocation.cap. Length of DATA1 is 0x0E33, i.e. DATA1 = 'C4'-tag value.
DATA2 - sequence of two cap-file components: Descriptor.cap and Debug.cap. These components are out of 'C4'-tag.
the questions mentioned above... here they are:
1. Global Platform does not define any data in LOAD command except 'E2' and 'C4' tag. Why DATA2 is transferred out of any tags?
2. Whether the sequence of cap-file components is important? i.e. Can i load Header.cap, Directory.cap etc. in other order than i see in DATA1 field from apdu-trace?
3. Debug.cap seems to be optional component. And what about Descriptor.cap component? Need i load it on card?

666 wrote:
1. Global Platform does not define any data in LOAD command except 'E2' and 'C4' tag. Why DATA2 is transferred out of any tags?Because the components are either optional or only required when communicating with a JCRE that has debugging capabilities. I assume you ran the project in JCOP Tools in debug mode against the simulator? If you did this against a real card it would fail as it does not have an instrumented JCRE capable of debugging code. You could try running the project as opposed to debugging to see the difference.
2. Whether the sequence of cap-file components is important? i.e. Can i load Header.cap, Directory.cap etc. in other order than i see in DATA1 field from apdu-trace?Yes it is. It is defined in the JCVM specification available from the Oracle website.
3. Debug.cap seems to be optional component. And what about Descriptor.cap component? Need i load it on card?No, it is optional and is not referenced by any other CAP file component.
Cheers,
Shane

Question about How to Use Custom CellEditors

Hi:
I have been trying to implement something like this: I have a JPanel, and when you double-click a particular spot on it, I want a textbox to appear. Currently, I am implementing it by using an undecorated JDialog that contains a JTextField in it (such that the text field occupies all the space in the dialog, i.e. you can't even tell that there is a dialog). This seems like a hack to me.
Another alternative that I have been thinking about is using layered panes, and hiding the textfield below the jpanel, and only bringing it to the front when the user double-clicks.
Then, I stumbled onto custom celleditors. Now, it seems that everyone is using them in JTables, JLists, JComboBoxes, etc. and I was wondering if it is something that I can use with a JPanel.
Can anyone comment on the implementations I am considering, as well as using custom celleditors with a JPanel?
Thanks in advance,
LordKelvan

Still don't understand your requirement. Does the text field stay there or disappear after the data is entered? If it disappears, then how do you change the value, do you have to click on the exact same pixel again?
Maybe you could use a MouseListener and then display a JOptionPane or JDialog to prompt for the information. Or if you want to display a JTextField then add a JTextField to the panel and then when the user enters the data by using the enter key or by clicking elsewhere on the GUI you remove the text field from the panel.

Question about how HP handles customer service issues

I am the owner of three HP laptops. Two of which are dead now due to the defective Nvidia chips they contained. When I called HP to report this issue, I was told by numerous HP customer service reps that they were not aware of any issues with the Nvidia GPU or that there had not been a high number of recorded problems concerning this. It has been proven in numerous documents made public recently that this defect was known about and there had been a high frequency of this issue. I would like to know why I was told these falsehoods and treated the way I was?
I subsequently decided to dismantle one of the computer to investigate the GPU. Sure enough the epoxy that reinforces the BGA solder-joint was cracked in the chip was no longer making good electrical contact with the PCB. What I found really perplexing was the 1/4" gap between the GPU and the copper heat-sink that was intended to provide cooling. I would assume HP was responsible for the cooling and chassis design? I would also assume it as HP who filled this GAP will thermal foam. Please correct me if I am wrong.

The recall was for certain models, did you confirm that your model was one of them?
________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

Some questions about how to change scenes

i have something like the following:
fxml (view/main/MainMenu.fxml):
<Scene fx:controller="view.main.CtrlMainMenu" xmlns:fx="http://javafx.com/fxml" stylesheets="view/main/main.css">
    <GridPane xmlns:fx="http://javafx.com/fxml" alignment="center" id="backgorund" hgap="10" vgap="10">
        
        <VBox spacing="8" GridPane.columnIndex="0" GridPane.rowIndex="1">
            <Button text="Start" onAction="#Start"/>
            <Button text="Options" onAction="#Options"/>
            <Button text="Exit" onAction="#Exit"/>
        </VBox>
    </GridPane>
</Scene>main loop (cotroller/main.java):
public class main extends Application{
    public static void main(String[] args){
        launch(main.class, args);
    public void start(Stage stage) throws Exception{
        stage.setTitle(CtrlLanguage.get(CtrlLanguage.TITLE));
        CtrlMainMenu main = new CtrlMainMenu();
        Scene scene = main.main();          //don't know how to make Scene scene = (Scene)FXMLLoader.load(getClass().getResource("MainMenu.fxml")); work on here since MainMenu.fxml is in view/main while the main class is in controller and ended up putting CtrlMainMenu in the view although is not very correct
        stage.setScene(scene);
        stage.setWidth(1080);
        stage.setHeight(720);
        stage.show();
}view controller (view/main/CtrlMainMenu.java):
public class CtrlMainMenu{
    //other buttons actions
    public Scene main() throws Exception{
        return (Scene)FXMLLoader.load(getClass().getResource("MainMenu.fxml"));
    @FXML protected void Start(ActionEvent event){
    @FXML protected void Options(ActionEvent event){
    @FXML protected void Exit(ActionEvent event){
        System.exit(0);          //is there any other way to finish the program than using a system.exit?
}got few questions currently:
1. i'd like to be able to keep using CtrlMainMenu for other buttons while the ones that appear there go to the main (since will be reusing those classes from other scenes)
tried adding fx:controller on panes instead of the scene, but it doesnt work at all (it crashes) else directly in CtrlMainMenu change the scenes of the stage, but then, i have to send the stage to every controller i use? (or how do i know the stage of the scene?)
and in the case of options, i'd like after done, go back to the previous scene, is that possible? if so, how?
2.if i want to implement languages, how do i do to change the text? tried with setText() but depending on where do i put it, it crashes, so dont know where do i have to put it
3.im doing a game that may have different number of players, so, is there some way to erase/hide/add data from a gridpane with fxml?

1. ok, found the way to change scenes, with this way:
@FXML protected void Start(ActionEvent event) throws Exception{
     Node node = (Node)event.getSource();
     Stage stage = (Stage)node.getScene().getWindow();
     Scene scene = (Scene)FXMLLoader.load(getClass().getResource("../view/main/MainMenu.fxml"));     //this is just an example, will change to go to another scene
     stage.setScene(scene);
     stage.show();
}but now i have another problem, when i click on the button the stage scene is changed, but the scene is transformed to a very small one at the top left (the size seems the same as when i dont put the set width/height on the stage when creating it), the stage size remains the same, and when i resize the window, it gets "repaired"
the options, i thought on using a pane over the current pane so this way instead of going back would be just removing that new pane, would that work well?
2. found about languages that is by using <Label text="%myText"/> and java.util.ResourceBundle but don't know how to use it, can someone provide me an example, please?
3. still haven't looked on it...

Recent iMac Convert - Questions about Trash and Applications Icon on Dock

Any advice would be appreciated. 2 issues:
1. I transfered my windows files to my iMac today and having been cleaning up the various folders. I have deleted quite a few files and have opened and emptied the trash icon many times. From about 1 hour ago, the trash icon will no longer open when I single left click it, double left click it or right click it and select "Open". I can right click and select "Empty", but now I can not review what I am about to delete just in case I have accidently moved a file to the trash that I should not have.
2. On the right side of my dock I only have icons for Documents and the Trash. I thought I was supposed to also have an icon for Applications. How can I put Applications in its proper spot on the dock. I tried dragging the applications icon from Finder to the space on the dock between the documents icon and the trash icon, but it will not allow me to do so.
Any ideas?
Thanks for the help.

Same way. Navigate to /Home/ folder then drag the Documents folder to the right side of the Dock.
Visit the site reference I gave you. You may find a solution in the FAQ I mentioned.
You may also try the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Question about how Mac OS X stores file information for iMovie and iPhoto

I'm relatively new to Macs (am using a 3yr old iMac and a new MBA running 10.6.4 and iLife 11) and I have this general question.
I'm using the iMac for a lot of Movie projects and photos. I've very quickly filled up my 500Gb hard drive and I don't understand why other than this:
I import a movie using iMovie and it's stored in an Events folder. I then make a project and it's stored in an Projects folder, I then share it to iTunes and it's stored in the iTunes Music/Movies folder. And I also see the movie in an iMovie Shared folder. In other words, it appears that a 2Gb movie (as an axample) becomes about 10Gb because it's saved in multiple places. Must I keep all of them?!
With iPhotos, I've imported about 6Gb of photos from my Windows PC. No problem. I copied across all the directories and then imported them into iPhoto. I then thought I could delete all the directories as the iPhoto folder became 24Gb in size! Not sure how but it seems that as well as keeping my original 6Gb of photo directories it's also put them into the iPhoto directory and somehow made it a big folder size?! If I delete the original folders (since they're now in the iPhoto app folder) then I can't actually browse the JPGs files can I except from within iPhoto only?
I've got about 80Gb of music, about 6Gb of photos and about 80Gb of movies. Somehow it's pretty much filled up 500Gb of hard drive (and very little other programs or files other than the normal iMac stuff it comes with) because of the way the Mac (iTunes, iMovie and iPhoto) seems to have the same thing copied everywhere.
All input greatfully receive and apologies if I'm being thick.
Richard.

Richard
I'll answer the iPhoto part for you.
If you use iPhoto in its default setting then the images are copied into the Library on import. Yes you can now delete the directories you have copied over.
then I can't actually browse the JPGs files can I except from within iPhoto only?
Yes and no...
The point of iPhoto is that it's your Photo Manager. It's the "go-to" app when you want to do anything with your Photos. - View them, edit them, email them, print them, use them in other apps, upload them whatever - all of these things are done from iPhoto.
There are two advantages to working this way.
1. You get to work with your Photos and don't have to think about files. This means the organisation possibilities are much greater than just files in folders. You can use Keywording, Smart Searching, Albums, Events and a plethora of other bases for categorising and therefore find your pics.
2. iPhoto is integrated throughout the entire OS. That means your Library is available throughout the OS without iPhoto being open by means of Media Browsers. You can search your Library from a MEdia Browser and so on.
So, while, yes, the files are not browsable via the Finder, there's no need to. Everything you need to do can be done with iPhoto.
Want to edit the pics in something other than iPhoto:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Question about how ExifMeta handles multivalued tags

Hi,
I have tested the ExifMeta (Great work, just what I needed!) to read face recognition data written by Picasa to RegionName, RegionType etc. fields in jpg metadata. Everything seems to work fine if there is only one name in the field but Picasa writes several values separated with commas like this:
RegionName John Doe, Jill Doll
RegionType Face, Face
etc.
In that case, the corresponding fields remain completely empty. So is this convention of writing several values separated by commas "standard" way of doing this? Is there any way to fix this?
Additionally, three Region category tags refuse to load giving the following error:
"Not updating due to error getting property, id: XMPmwgrs_RegionAppliedToDimensionsUnit, from: nil, to: pixel, err-msg: Attempt to access property "XMPmwgrs_RegionAppliedToDimensionsUnit" not declared in com.robcole.lightroom.ExifMeta's Info.lua"
This is minor problem but it would be nice to know how to handle this kind of error in the future. Do I need to declare these in the lua-code if I need them?
Looking forward to replies,
Mikko

Mikko,
In future, please direct exif-meta specific questions to the exif-meta forum, or me personally.
But a quick answer: exif-meta doesn't (by default) parse ("interpret") text values, so commas shouldn't be handled differently than any other text.
The best way to find out what's going on is to invoke exiftool from the command line and inspect the output.
My hunch is there is a zero character in there representing end-of-string, which can cause problems for lua code (e.g. Lightroom).
If you send me one of your files which includes the face data, I'll have a look.
PS - No clue about the 3 region tags (might be worth trying it with the latest version of exiftool) - please send me a file for inspection - thanks.
Rob

Question about how javac finds referenced files.

Hi
I am just beginning to learn Java and have got some questions related to packages.
I have two classes:
MyClass.java
package pkg;
public class MyClass {
     public void prn(int x){
     System.out.println("Integer: "+x);
Test.java
import pkg.*;
public class Test{
     public static void main(String[] args){
          MyClass obj=new MyClass();
          obj.prn(2);
Directory structure
/root/ jprog/MyClass.java
/root/ jprog/Test.java
Executing the following sequence of commands gives me:
# ls
MyClass.java Test.java
# javac -d . MyClass.java
# ls
MyClass.java Test.java pkg/
# cd pkg
# ls
MyClass.class -----compiles.
# cd ..
# javac Test.java
Test.java:5: cannot access MyClass
bad class file: ./MyClass.java
file does not contain class MyClass
Please remove or make sure it appears in the correct subdirectory of the classpath.
MyClass obj=new MyClass();
^
1 error
Now after reading another thread on this forum I came to know that the compiler finds the
MyClass.java in the wrong package. Using verbose option with javac shows this.
So I move it to some other directory and everything works.
# mv MyClass.java /root
# ls
Test.java pkg/
# javac Test.java
# java Test
Integer: 2
Now the question begins:
Suppose we go back to how the files were arranged before I moved the MyClass.java file and
I change the Test.java file by adding
package pkg2;
statement to it.
Now everything compiles
# ls
MyClass.java Test.java ---I have deleted pkg and .class files
# cat Test.java
package pkg2;
import pkg.*;
public class Test{
public static void main(String[] args){
MyClass obj=new MyClass();
obj.prn(2);
# cat MyClass.java
package pkg;
public class MyClass {
public void prn(int x){
System.out.println("Integer: "+x);
# javac -d . MyClass.java
# javac -d . Test.java
# ls
MyClass.java Test.java pkg/ pkg2/
# java pkg2.Test
Integer: 2
Why isn't the MyClass.java file causing any problems now?
Using the verbose option with javac shows that the compiler goes straight for the pkg/MyClass.class.
My readings of Core Java Horstmann tell me that the compiler always looks in the current directory. javac documentation also doesn't help. I know that the documentation recommends that the source file locations should match the package statements.
I'm just trying to learn how javac finds referenced files.
Any help??
Thanks a load in advance.

I know that the
documentation recommends that the source file
locations should match the package statements.This is not merely a recommendation, it is a requirement.
Both javac and java find classes by traversing the classpath. The classpath should contain directories (or jar files) that correspond to the top of a (part of the) package hierarchy.
For example, if the Java code for your class is in a file C:\src\pkg\MyClass.java, and MyClass.java declares the class to be in package pkg, the classpath should contain C:\src. Classes are then found by transforming their package declaration into a directory structure.
Please note that javac works on files, not classes. Therefore it is necessary to specify the full filenames of the files you want to compile, even if you have specified the classpath. By default, javac will put compiled class files in the same location as their sources, so the classpath for the java command should also contain C:\src.
The exception to the rule is when all classes for the program are in the default package (i.e., they do NOT contain a package statement). In that case, it is possible for javac (and I believe java as well) to find all classes in the current directory, so it will "just work".
You can specify the classpath using the -cp parameter to both javac and java.
Hope this helps.

Question about how not to insert the same row twice

hello everyone
i have two tables
table employee_list
employee_id
employee_name
employee_num
employee_date
and table employee_form
employee_id
employee_name
employee_num
employee_date
table employee_form should contain the exact data like employee_list .
if there are missing data i'm inserting it to table employee_form_miss(missing).
now i have a probelm cause the compair between the two table,take place
more then just one time.now if there are still missing data i don't want that to table employee_form_miss will insert the same data that already exist in this table.
i've been thinking about constraints table employee_form_miss(employee_id
employee_name
employee_num
employee_date).
but i think it will be a wird way to handle this because i will do an insert
and then what rollback? or delete?
please help me how to manage this
thanks in advance.

hello everyone
i have two tables
table employee_list
employee_id
employee_name
employee_num
employee_date
and table employee_form
employee_id
employee_name
employee_num
employee_date
i'm using an embedded sql in cobol program
DECLARE AA CURSOR FOR
select a.employee_name ,a.employee_num,a.employee_date
from employee_list a
WHERE a.employee_date = :employee-date
and NOT EXISTS
(select null from employee_form
WHERE employee_name =a.employee_name and
employee_num = a.employee_num and
employee_date = a.employee_date )
i'm doing open and fetch to the cursor.
and loop over the sqlerrd(3) result in order to insert them to the employee_form_miss table
insert into employee_form_miss (employee_name,employee_num,employee_date)
values (:employee-name,:employee-num,:employee-date)
the employee_id in table employee_form_miss there is a trigger which
Increment the sequence by 1 for each row that we insert.
so my question was that if i'm doing a constraint, so still i have to do
an insert and then if there is a constraint to do rollback or delete
from duplicate row. is there a better way to manage this ?
thank you

Question about how put a icon custom in toolbar.

Similar Messages

Maybe you are looking for